Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Preparation of Ag Schottky contacts on n-type GaN bulk crystals grown in nitrogen rich atmosphere by the hydride vapor phase epitaxy technique

Electrical properties of Schottky contacts on n-type GaN grown in nitrogen rich atmosphere with different N/Ga ratios by hydride vapor phase epitaxy were investigated. We show that tunneling of electrons from the conduction band of GaN to the metal is dominant in our samples. The quality of Schottky contacts does not only depend on surface preparation but also on the growth conditions of the crystals. Schottky contacts on these crystals show an increasing deterioration when higher N/Ga growth ratios are used. We correlate our results with the presence of negatively charged gallium vacancies in the samples. These charges compensate the positively charged donors and lead to a significant increase in series resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray determination of threading dislocation densities in GaN/Al{sub 2}O{sub 3}(0001) films grown by metalorganic vapor phase epitaxy

Densities of a- and a+c-type threading dislocations for a series of GaN films grown in different modes by metalorganic vapor phase epitaxy are determined from the x-ray diffraction profiles in skew geometry. The reciprocal space maps are also studied. Theory of x-ray scattering from crystals with dislocations is extended in order to take into account contribution from both threading and misfit dislocations. The broadening of the reciprocal space maps along the surface normal and the rotation of the intensity distribution ellipse is attributed to misfit dislocations at the interface. We find that the presence of a sharp AlN/GaN interface leads to an ordering of misfit dislocations and reduces strain inhomogeneity in GaN films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substrate misorientation induced strong increase in the hole concentration in Mg doped GaN grown by metalorganic vapor phase epitaxy

We demonstrate that relatively small GaN substrate misorientation can strongly change hole carrier concentration in Mg doped GaN layers grown by metalorganic vapor phase epitaxy. In this work intentionally misoriented GaN substrates (up to 2 deg. with respect to ideal <0001> plane) were employed. An increase in the hole carrier concentration to the level above 10{sup 18} cm{sup -3} and a decrease in GaN:Mg resistivity below 1 {omega} cm were achieved. Using secondary ion mass spectroscopy we found that Mg incorporation does not change with varying misorientation angle. This finding suggests that the compensation rate, i.e., a decrease in unintentional donor density, is responsible for the observed increase in the hole concentration. Analysis of the temperature dependence of electrical transport confirms this interpretation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polycrystalline indium phosphide on silicon by indium assisted growth in hydride vapor phase epitaxy

Polycrystalline InP was grown on Si(001) and Si(111) substrates by using indium (In) metal as a starting material in hydride vapor phase epitaxy (HVPE) reactor. In metal was deposited on silicon substrates by thermal evaporation technique. The deposited In resulted in islands of different size and was found to be polycrystalline in nature. Different growth experiments of growing InP were performed, and the growth mechanism was investigated. Atomic force microscopy and scanning electron microscopy for morphological investigation, Scanning Auger microscopy for surface and compositional analyses, powder X-ray diffraction for crystallinity, and micro photoluminescence for optical quality assessment were conducted. It is shown that the growth starts first by phosphidisation of the In islands to InP followed by subsequent selective deposition of InP in HVPE regardless of the Si substrate orientation. Polycrystalline InP of large grain size is achieved and the growth rate as high as 21 μm/h is obtained on both substrates. Sulfur doping of the polycrystalline InP was investigated by growing alternating layers of sulfur doped and unintentionally doped InP for equal interval of time. These layers could be delineated by stain etching showing that enough amount of sulfur can be incorporated. Grains of large lateral dimension up to 3 μm polycrystalline InP on Si with good morphological and optical quality is obtained. The process is generic and it can also be applied for the growth of other polycrystalline III–V semiconductor layers on low cost and flexible substrates for solar cell applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal-organic vapor-phase epitaxy-grown ultra-low density InGaAs/GaAs quantum dots exhibiting cascaded single-photon emission at 1.3 μm

By metal-organic vapor-phase epitaxy, we have fabricated InGaAs quantum dots on GaAs substrate with an ultra-low lateral density (<10{sup 7} cm{sup −2}). The photoluminescence emission from the quantum dots is shifted to the telecom O-band at 1.31 μm by an InGaAs strain reducing layer. In time-resolved measurements, we find fast decay times for exciton (∼600 ps) and biexciton (∼300 ps). We demonstrate triggered single-photon emission (g{sup (2)}(0)=0.08) as well as cascaded emission from the biexciton decay. Our results suggest that these quantum dots can compete with their counterparts grown by state-of-the-art molecular beam epitaxy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Vapor–Phase Synthesis of Electrocatalytic Covalent Organic Frameworks

The inability to process many covalent organic frameworks (COFs) as thin films plagues their widespread utilization. Herein, a vapor-phase pathway for the bottom-up synthesis of a class of porphyrin-based COFs is presented. This approach allows integrating electrocatalysts made of metal-ion-containing COFs into the electrodes’ architectures in a single-step synthesis and deposition. By precisely controlling the metal sites at the atomic level, remarkable electrocatalytic performance is achieved, resulting in unprecedentedly high mass activity values. How the choice of metal atoms, i.e., cobalt and copper, can determine the catalytic activities of POR-COFs is demonstrated. The theoretical data proves that the Cu site is highly active for nitrate conversion to ammonia on the synthesized COFs.

25 ENERGY STORAGE↗

High growth rate hydride vapor phase epitaxy at low temperature through use of uncracked hydrides

We demonstrate hydride vapor phase epitaxy (HVPE) of GaAs with unusually high growth rates (RG) at low temperature and atmospheric pressure by employing a hydride-enhanced growth mechanism. Under traditional HVPE growth conditions that involve growth from Asx species, RG exhibits a strong temperature dependence due to slow kinetics at the surface, and growth temperatures >750 degrees C are required to obtain RG > 60 um/h. We demonstrate that when the group V element reaches the surface in a hydride, the kinetic barrier is dramatically reduced and surface kinetics no longer limit RG. In this regime, RG is dependent on mass transport of uncracked AsH3 to the surface. By controlling the AsH3 velocity and temperature profile of the reactor, which both affect the degree of AsH3 decomposition, we demonstrate tuning of RG. We achieve RG above 60 um/h at temperatures as low as 560 degrees C and up to 110 um/h at 650 degrees C. We incorporate high-RG GaAs into solar cell devices to verify that the electronic quality does not deteriorate as RG is increased. The open circuit voltage (VOC), which is a strong function of non-radiative recombination in the bulk material, exhibits negligible variance in a series of devices grown at 650 degrees C with RG = 55-110 um/h. The implications of low temperature growth for the formation of complex heterostructure devices by HVPE are discussed.

14 SOLAR ENERGY↗

Analysis of GaAs Solar Cells Grown on 50 mm Wafers at 700 degrees C by Dynamic Hydride Vapor Phase Epitaxy

We grew and analyzed GaAs photovoltaics devices grown by dynamic hydride vapor phase epitaxy (D-HVPE) on 50 mm GaAs substrates. These were grown at 700 degrees C in a kinetically-limited growth regime. These devices exhibited nearly identical performance to our previous single-junction GaAs devices (>25% efficiency) that were grown at 650 degrees C in a transport-limited growth regime. We determined that the relatively low non-uniformity in device efficiency was not related to variations in structural characteristics, such as GaAs base thickness or Ga x In 1-x P composition or thickness, but rather uniformity of the absorber doping. These results show that growth of high quality material is possible in multiple growth regimes by D-HVPE.

14 SOLAR ENERGY↗

Morphology Control of Growth by Hydride Vapor Phase Epitaxy on Faceted GaAs Substrates Produced by Controlled Spalling for Low Cost III-V Devices

In this work, we apply the morphology control of hydride vapor phase epitaxial (HVPE) growth to planarize faceted, non-planar substrates. Controlled spalling is a promising high-throughput substrate reuse technology that could reduce substrate costs for III-V devices; however, the spalling fracture for (100)-oriented GaAs substrates produces a regularly corrugated surface of facets that are 5-20 um in height. We discuss how to planarize these surfaces using only a few minutes of HVPE growth and how to minimize the impact on throughput when integrating faceted wafers into a potential manufacturing process at scale.

epitaxy↗

24% Single-Junction GaAs Solar Cell Grown Directly on Growth-Planarized Facets Using Hydride Vapor Phase Epitaxy

A 24%-efficient single-junction GaAs solar cell grown directly on a faceted, spalled (100) GaAs substrate after in situ planarization growth by hydride vapor phase epitaxy (HVPE) is achieved. Controlled spalling, a promising low-cost substrate reuse technique, produces large facets in (100)-oriented GaAs substrates due to the orientation of the fracture planes used for lift-off. Planarization by HVPE offers a path toward direct use of these spalled substrates without costly polishing steps. In this report the growth rate anisotropy enabling planarization arising from diffusion and differences in the adsorption of growth species on {n11}B-type facets relative to (100) is determined. Consecutive planarization and device growth that results in a solar cell with a minimal performance difference relative to a control cell grown on an epitaxy-ready substrate are demonstrated. These results show that controlled spalling coupled with HVPE planarization is a viable pathway for lowering the cost of III-V photovoltaics.

14 SOLAR ENERGY↗

Dynamic Hydride Vapor Phase Epitaxy (D-HVPE) as a Route to Inexpensive, High-Performance III-V Materials and Devices

This work describes the recent development of Dynamic Hydride Vapor Phase Epitaxy (D-HVPE), which extends the standard HVPE process to allow for the deposition of relatively complex heterostructures and devices at growth rates in excess of 300 um/h. This process uses low-cost elemental metal precursors, and uses all of the reactants efficiently to create high-performance devices. D-HVPE also lends itself to potential in-line growth, which when combined with the low-cost precursors and extremely fast growth rates for high-quality III-V materials, can lead to significantly lower epitaxial growth costs. Here, we focus on the growth of high-efficiency photovoltaics as an example device to show the capabilities of the D-HVPE growth process.

14 SOLAR ENERGY↗

In{sub 0.8}Ga{sub 0.2}As Quantum Dots for GaAs Solar Cells: Metal-Organic Vapor-Phase Epitaxy Growth Peculiarities and Properties

The growth peculiarities of In{sub 0.8}Ga{sub 0.2}As quantum dots and their arrays on GaAs surface by metalorganic vapor-phase epitaxy are investigated. The bimodal size distribution of In{sub 0.8}Ga{sub 0.2}As quantum dots is established from the photoluminescence spectra recorded at different temperatures. The growth parameters were determined at which the stacking of 20 In{sub 0.8}Ga{sub 0.2}As quantum-dot layers in the active area of a GaAs solar cell makes it possible to enhance the photogenerated current by 0.97 and 0.77 mA/cm{sup 2} for space and terrestrial solar spectra, respectively, with the high quality of the p–n junction retained. The photogenerated current in a solar cell with quantum dots is higher than in the reference GaAs structure by ~1% with regard to nonradiative-recombination loss originating from stresses induced by the quantum-dot array.

36 MATERIALS SCIENCE↗

Analysis of GaInP Solar Cells Grown by Hydride Vapor Phase Epitaxy

We analyzed the performance of a simple n-on-p GaInP solar cell grown without surface passivation but with a back reflector by dynamic hydride vapor phase epitaxy (DHYPE). We employed a thin emitter because the lack of surface passivation limited collection in that layer. We obtained a maximum internal quantum efficiency of nearly 95% by using 1 x 10^16 cm^-3 base doping. This device exhibited an open circuit voltage (VOC) of 1.27 V, short circuit current (JSC) of 12.6 mA/cm^2 , a fill factor (FF) of 79.3%, and 12.8% efficiency. Limits on cell performance predominantly come from VOC and FF. A Suns-VOC analysis of this cell indicates that 5.5% (absolute) of the FF is lost to series resistance, which stems from a high contact resistance. Another 5.5% of FF loss results from elevated dark current, leading to non-ideal diode behavior. This behavior implies that improvement in bulk material quality through reduction in concentrations of non-radiative defects will improve cell performance.

14 SOLAR ENERGY↗

Photoelectric and luminescence properties of GaSb-Based nanoheterostructures with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown by metalorganic vapor-phase epitaxy

The luminescence and photoelectric properties of heterostructures with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown on n-GaSb substrates by metalorganic vapor-phase epitaxy are investigated. Intense superlinear luminescence and increased optical power as a function of the pump current in the photon energy range of 0.6-0.8 eV are observed at temperatures of T = 77 and 300 K. The photoelectric, current-voltage, and capacitance characteristics of these heterostructures are studied in detail. The photosensitivity is examined with photodetectors operating in the photovoltaic mode in the spectral range of 0.9-2.0 {mu}m. The sensitivity maximum at room temperature is observed at a wavelength of 1.55 {mu}m. The quantum efficiency, detectivity, and response time of the photodetectors were estimated. The quantum efficiency and detectivity at the peak of the photosensitivity spectrum are as high as {eta} = 0.6-0.7 and D{sub {lambda}max}{sup *} = (5-7) Multiplication-Sign 10{sup 10} cm Hz{sup 1/2} W{sup -1}, respectively. The photodiode response time determined as the rise time of the photoresponse pulse from 0.1 to the level 0.9 is 100-200 ps. The photodiode transmission bandwidth is 2-3 GHz. Photodetectors with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown on n-GaSb substrates are promising foruse in heterodyne detection systems and in information technologies.

36 MATERIALS SCIENCE↗

Design of Planarizing Growth Conditions on Unpolished and Faceted (100)-Oriented GaAs Substrates Using Hydride Vapor Phase Epitaxy

Here we performed a design of experiments (DoE) analysis to determine the effect of various growth parameters on in situ planarizing overgrowth of rough substrates using hydride vapor phase epitaxy (HVPE). We used two types of rough (100)-oriented GaAs substrates to compare the effect of the initial morphology on the epitaxial growth behavior: an irregular, as-cut surface resultant from cutting the wafer from a GaAs boule and a regularly faceted surface produced by controlled spalling. The DoE analysis identified trends in the overgrowth behavior with changing growth conditions, and we used these trends to design favorable planarization growth conditions for each surface type. These favorable conditions enabled full planarization of a spalled surface with >2.5 um facet height within 10.8 min of growth. The root mean squared (RMS) surface roughness of the resulting (100) surface was 24.5 nm over a 286 um x 215 um area. Our results show that planarization growth by HVPE is a promising technique to enable device growth directly on rough substrates, and the trends revealed through DoE analysis indicate a path toward further optimization of planarization growth conditions for as-cut and spalled surfaces.

14 SOLAR ENERGY↗

GaLnAsP Solar Cells Grown by Hydride Vapor Phase Epitaxy for One-Sun & Low-Concentration III-V/Si Photovoltaics

Dynamic hydride vapor phase epitaxy (D-HVPE) has recently reemerged as a low-cost alternative to metalorganic chemical vapor deposition (MOCVD) for the growth of highefficiency III-V solar cells. Quaternary GaInAsP solar cells in the bandgap range of ~1.6-1.8 eV are promising top-cell candidates for III-V/Si tandem solar cells. In this work, we report on the development of lattice-matched GaInAsP (Eg~1.66 eV) solar cells grown via low-cost HVPE at very high growth rates of ~0.7 um/min (~42 um/h). We demonstrate for the first time HVPE grown passivated GaInAsP homojunction solar cells that show substantial improvement in the short-wavelength photoresponse attributed to the incorporation of a GaInP window layer. The heterointerfaces in these multilayer devices were characterized by transmission electron microscopy. The best device achieved a certified one-sun efficiency of 18.7% under AM1.5G, demonstrating the viability of HVPE to grow multilayered structures comprising ternary and quaternary alloys. This work represents a promising step towards low-cost III-V/Si tandem photovoltaics with one-sun efficiencies exceeding 30%.

14 SOLAR ENERGY↗

Development of GaInP Solar Cells Grown by Hydride Vapor Phase Epitaxy

We demonstrate the growth of homojunction GaInP solar cells by dynamic hydride vapor phase epitaxy for the first time. Simple unpassivated n-on-p structures grown in an inverted configuration with gold back reflectors were analyzed. Short wavelength performance varied strongly with emitter thickness, since collection in the emitter was limited by the lack of surface passivation. Collection in the base increased strongly with decreasing doping density, in the range 1 x 10 16 - 5 x 10 17 cm -3 . Optical modeling indicated that, in our best device, doped ~1 x 10 16 cm -3 , almost 94% of photons that passed through the emitter were collected. Modeling also indicated that the majority of collection occurs in the depletion region with this design, suggesting that nonradiative recombination there might limit device performance. In agreement with this observation, the experimental dark J-V curve exhibited an ideality factor near n = 2. Thus, limitation of deep level carrier traps in the material is a path to improved performance. Preliminary experiments indicate that a reduced V/III ratio, which potentially affects the density of these presumed traps, improves cell performance. With reduced V/III ratio, we demonstrate a ~13% efficient GaInP cell measured under the 1-sun AM1.5G spectrum. In conclusion, this cell had an antireflective coating, but no front surface passivation.

14 SOLAR ENERGY↗