Search NASA⌕ Search

SEARCH · Search NASA

Results for “VARIABLE THRUST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1951

Altitude Performance of J35-A-17 Turbojet Engine in an Altitude Chamber

An investigation of the altitude performance characteristics of an Allison J35-A-17 turbojet engines have been conducted in an altitude chamber at the NACA Lewis laboratory. Engine performance was obtained over a range of altitudes from 20,000 to 60,000 feet at a flight Mach number of 0.62 and a range of flight Mach numbers from 0.42 to 1.22 at an altitude of 30,000 feet. The performance of the engine over the range investigated could be generalized up to an altitude of 30,000 feet. Performance of the engine at any flight Mach number in the range investigated can be predicted for those operating condition a t which critical flow exits in the exhaust nozzle with the exception of the variables corrected net thrust, and net-thrust specific fuel consumption.

Vincent, K. R.↗
NASA NTRS2017

Fast and Reliable Approximations for Interplanetary Low-Thrust Transfers

A three-step process bridges the gap between lower-fidelity solutions that ignore optimal dynamics and fully optimized solutions that are computationally expensive to generate. First, analytic solutions for transfers with free time and angle characterize the evolution of the shape and orientation of the orbit. Next, optimal control theory supplies the thrust vector with variable specific impulse while satisfying flight time and transfer angle constraints. Transfers with the additional constraint of constant specific impulse then provide a more realistic thruster model for preliminary trade studies. These approximations deliver a hundredfold improvement in run time at the expense of a few percent error in mass.

Landau, Damon↗
NASA NTRSDate not supplied

Comparison of the CHARM Predictions of the Multirotor Test Bed with Wind Tunnel Experimental Results

Urban air mobility as a fast transportation solution has captured the attention of private companies and government aviation departments in the 21st century. New designs of aerial vehicles are being developed to meet industry needs but often neglect the aerodynamic characteristics and the effects of interacting rotors. This work focuses on predicting rotor behavior and understanding the importance of the rotor wake interaction for future urban air mobility (UAM) designs. The Multirotor Test Bed (MTB) project was initiated at NASA Ames Research center to support the NASA Revolutionary Vertical Lift Technology Project to study rotorcraft performance specifically for multirotor aircraft. The MTB is a modular multirotor test stand that makes testing feasible for up to six rotors at different angles and rotor arrangements, including Tall and Short configurations at different horizontal and vertical rotor separation distances. The MTB was tested in the U.S Army’s 7-by 10-Foot Wind Tunnel at NASA Ames Research Center in late 2019. This work focuses on exploring the impact of aerodynamic interactions between the MTB rotors using the Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM) software. The CHARM software is capable of modeling Vertical Take Off and Landing aircraft aerodynamics in maneuvering and steady flight conditions. CHARM allows the user to define flow and body characteristics, including the rotor geometry, aerodynamic conditions, wind tunnel speed, and airfoil tables as inputs. As the first step, a single MTB rotor was simulated in hover, and the results were compared with wind tunnel test data to confirm the CHARM parameters. Once the accurate performance was verified, the MTB rotors were simulated in forward flight, and each rotor was trimmed to the measured thrust. The simulation variables include one, two, four, and six rotors at the Short and Tall configurations, with MTB pitch angles of 0, -5, and -10 degrees. The MTB was simulated with and without wind tunnel walls. These results demonstrate the rotor wake interaction and its impact on rotor performance. This information also helps determine which configurations should be explored for future wind tunnel tests.

CHARM Predictions↗
NASA NTRS1991

Static internal performance of ventral and rear nozzle concepts for short-takeoff and vertical-landing aircraft

The internal performance of two exhaust system concepts applicable to single-engine short-take-off and vertical-landing tactical fighter configurations was investigated. These concepts involved blocking (or partially blocking) tailpipe flow to the rear (cruise) nozzle and diverting it through an opening to a ventral nozzle exit for vertical thrust. A set of variable angle vanes at the ventral nozzle exit were used to vary ventral nozzle thrust angle between 45 and 110 deg relative to the positive axial force direction. In the vertical flight mode the rear nozzle (or tailpipe flow to it) was completely blocked. In the transition flight mode flow in the tailpipe was split between the rear and ventral nozzles and the flow was vectored at both exits for aircraft control purposes through this flight regime. In the cruise flight mode the ventral nozzle was sealed and all flow exited through the rear nozzle.

Re, Richard J.↗
NASA NTRS2012

Multi-Objective Optimization of a Turbofan for an Advanced, Single-Aisle Transport

Considerable interest surrounds the design of the next generation of single-aisle commercial transports in the Boeing 737 and Airbus A320 class. Aircraft designers will depend on advanced, next-generation turbofan engines to power these airplanes. The focus of this study is to apply single- and multi-objective optimization algorithms to the conceptual design of ultrahigh bypass turbofan engines for this class of aircraft, using NASA s Subsonic Fixed Wing Project metrics as multidisciplinary objectives for optimization. The independent design variables investigated include three continuous variables: sea level static thrust, wing reference area, and aerodynamic design point fan pressure ratio, and four discrete variables: overall pressure ratio, fan drive system architecture (i.e., direct- or gear-driven), bypass nozzle architecture (i.e., fixed- or variable geometry), and the high- and low-pressure compressor work split. Ramp weight, fuel burn, noise, and emissions are the parameters treated as dependent objective functions. These optimized solutions provide insight to the ultrahigh bypass engine design process and provide information to NASA program management to help guide its technology development efforts.

Berton, Jeffrey J.↗
NASA NTRS2003

Neural Network and Regression Methods Demonstrated in the Design Optimization of a Subsonic Aircraft

The neural network and regression methods of NASA Glenn Research Center s COMETBOARDS design optimization testbed were used to generate approximate analysis and design models for a subsonic aircraft operating at Mach 0.85 cruise speed. The analytical model is defined by nine design variables: wing aspect ratio, engine thrust, wing area, sweep angle, chord-thickness ratio, turbine temperature, pressure ratio, bypass ratio, fan pressure; and eight response parameters: weight, landing velocity, takeoff and landing field lengths, approach thrust, overall efficiency, and compressor pressure and temperature. The variables were adjusted to optimally balance the engines to the airframe. The solution strategy included a sensitivity model and the soft analysis model. Researchers generated the sensitivity model by training the approximators to predict an optimum design. The trained neural network predicted all response variables, within 5-percent error. This was reduced to 1 percent by the regression method. The soft analysis model was developed to replace aircraft analysis as the reanalyzer in design optimization. Soft models have been generated for a neural network method, a regression method, and a hybrid method obtained by combining the approximators. The performance of the models is graphed for aircraft weight versus thrust as well as for wing area and turbine temperature. The regression method followed the analytical solution with little error. The neural network exhibited 5-percent maximum error over all parameters. Performance of the hybrid method was intermediate in comparison to the individual approximators. Error in the response variable is smaller than that shown in the figure because of a distortion scale factor. The overall performance of the approximators was considered to be satisfactory because aircraft analysis with NASA Langley Research Center s FLOPS (Flight Optimization System) code is a synthesis of diverse disciplines: weight estimation, aerodynamic analysis, engine cycle analysis, propulsion data interpolation, mission performance, airfield length for landing and takeoff, noise footprint, and others.

Hopkins, Dale A.↗
NASA NTRS1957

Summary of Scale-Model Thrust-Reverser Investigation

An investigation was undertaken to determine the characteristics of several basic types of thrust-reverser. Models of three types, target, tailpipe cascade, and ring cascade, were tested with unheated air. The effects of design variables on reverse-thrust performance, reversed-flow boundaries, and thrust modulation characteristics were determined.

Povolny, John H↗
NASA NTRS1971

Variable geometry aft-fan for takeoff quieting or thrust augmentation of a turbojet engine

A concept is presented that combines the low-noise and high-thrust characteristics of a turbofan at takeoff, together with its high efficiency at subsonic flight speeds, with the high efficiency of a turbojet at supersonic cruise. It consists of a free turbine with tip fan mounted behind the turbine of a conventional turbojet engine. Fan air is supplied from blow-in doors or is ducted from the main engine inlet. At high flight speeds where fan augmentation is not desirable, the fan inlet is closed and the free turbine is stopped by adjustment of its variable-camber stators. Estimates of noise, cycle performance, and example configurations are presented for a typical supersonic transport application.

Weber, R. J.↗
NASA NTRS1974

Reversed cowl-flap thrust augmentor

Inlet mouthpiece with variable geometry improves low-speed performance of inlet (or ejector) of jet engines by use of reversed cowl-flap mechanism. Flaps can be adjusted mechanically or system can be operated with pressure taps set so pressure on inlet face is always smaller than pressure on back of inlet.

Cheng, D. Y.↗
NASA NTRS1986

Optimal landing of a helicopter in autorotation

The landing of a helicopter in autorotation is formulated as a nonlinear optimal control problem. A unique feature in the present formulation is the addition of path inequality constraints on both the control and the state vectors. The control variable inequality constraint is a reflection of the limitation on the rotor thrust coefficient. The state-variable inequality constraint is an upper bound on the vertical sink-rate of the helicopter during descent. Optimal trajectories are calculated for entry conditions well within the height-velocity (H-V) restriction curve, with the helicopter initially in hover or in forward flight. The optimal solutions exhibited control techniques similar to those used by helicopter pilots in actual autorotational landings. The study indicates that, subject to pilot acceptability, a substantial reduction could be made in the H-V restriction zone using optimal control techniques.

Lee, A. Y.↗
NASA NTRS1989

Advanced H2/O2 space engine parametrics

Engine cycle analyses conducted on a 3000-lbf component testing model of an H2/O2-fueled advanced orbit-transfer vehicle engine employing a dual-expander cycle have yielded pressure and temperature trend predictions. On the basis of the results obtained, the dual-expander cycle is projected to be scalable to thrust levels of as much as 50,000 lbf, with chamber pressures of 2000 psi. The high chamber pressure, in conjunction with the use of a gas-gas injector element, facilitates 10:1-range continuously variable throttling. The preferred thrust level for supporting mission studies would be of the order of 20,000 lbf.

Schneider, J. A.↗
NASA NTRS1992

Thrust stand evaluation of engine performance improvement algorithms in an F-15 airplane

Results are presented from the evaluation of the performance seeking control (PSC) optimization algorithm developed by Smith et al. (1990) for F-15 aircraft, which optimizes the quasi-steady-state performance of an F100 derivative turbofan engine for several modes of operation. The PSC algorithm uses onboard software engine model that calculates thrust, stall margin, and other unmeasured variables for use in the optimization. Comparisons are presented between the load cell measurements, PSC onboard model thrust calculations, and posttest state variable model computations. Actual performance improvements using the PSC algorithm are presented for its various modes. The results of using PSC algorithm are compared with similar test case results using the HIDEC algorithm.

Conners, Timothy R.↗
NASA NTRS1973

Wind tunnel tests of a 20 inch diameter 1.15 pressure ratio fan engine model

Aerodynamic and acoustic measurements at a typical STOL aircraft takeoff and landing velocity demonstrated that a 1.35 inlet lip area contraction ratio was superior to a 1.26 ratio at high nacelle incidence angles. Reverse thrust, obtained with a variable pitch rotor, was lower at the landing velocity, and the noise level higher, than at the static condition. High speed tests showed that, for the design cruise Mach number of 0.75, internal losses and external drag were 27 percent of the ideal fan net thrust, and propulsive efficiency was estimated to be 59 percent for an 85 percent efficient fan stage.

Wesoky, H. L.↗
NASA NTRS1991

High-power hydrogen arcjet performance

A hydrogen arcjet was operated at power levels ranging from 5 to 30 kW with three different nozzle geometries. Test results using all three nozzle geometries are reported and include variations of specific impulse with flow rate, and thrust with power. Geometric variables investigated included constrictor diameter, length, and diverging exit angle. The nozzle with a constrictor diameter of 1.78 mm and divergence angle of 20 deg was found to give the highest performance. A specific impulse of 1460 s was attained with this nozzle at a thrust efficiency of 29.8 percent. The best efficiency measured was 34.4 percent at a specific impulse of 1045 s. Post test examination of the cathode showed erosion after 28 hours of operation to be small, and limited to the conical tip where steady state arc attachment occurred. Each nozzle was tested to destruction.

Haag, Thomas W.↗
NASA NTRS1991

High-power hydrogen arcjet performance

A hydrogen arcjet was operated at power levels ranging from 5 to 30 kW with three different nozzle geometries. Test results using all three nozzle geometries are reported and include variations of specific impulse with flow rate, and thrust with power. Geometric variables investigated included constrictor diameter, length, and diverging exit angle. The nozzle with a constrictor diameter of 1.78 mm and divergence angle of 20 degrees was found to give the highest performance. A specific impulse of 1460 s was attained with this nozzle at a thrust efficiency of 29.8 percent. The best efficiency measured was 34.4 percent at a specific impulse of 1045 s. Post test examination of the cathode showed erosion after 28 hours of operation to be small, and limited to the conical tip where steady state arc attachment occurred. Each nozzle was tested to destruction.

Haag, Thomas W.↗
NASA NTRS1989

Optimal orbit transfer suitable for large flexible structures

The problem of continuous low-thrust planar orbit transfer of large flexible structures is formulated as an optimal control problem with terminal state constraints. The dynamics of the spacecraft motion are treated as a point-mass central force field problem; the thrust-acceleration magnitude is treated as an additional state variable; and the rate of change of thrust-acceleration is treated as a control variable. To ensure smooth transfer, essential for flexible structures, an additional quadratic term is appended to the time cost functional. This term penalizes any abrupt change in acceleration. Numerical results are presented for the special case of a planar transfer.

Chatterjee, Alok K.↗
NASA NTRS1973

Wind tunnel tests of a 20 inch diameter 1.15 pressure ratio fan engine model

Aerodynamic and acoustic measurements at a typical STOL aircraft takeoff and landing velocity demonstrated that a 1.35 inlet lip area contraction ratio was superior to a 1.26 ratio at high nacelle incidence angles. Reverse thrust, obtained with a variable pitch rotor, was lower at the landing velocity, and the noise level higher, than at the static condition. High speed tests showed that, for the design cruise Mach number of 0.75, internal losses and external drag were 27 per cent of the ideal fan net thrust, and propulsive efficiency was estimated to be 59 per cent for an 85 per cent efficient fan stage. For comparison, a similar 1.55 pressure ratio fan system would have a propulsive efficiency of 62 per cent.

Wesoky, H. L.↗