Search NASA⌕ Search

SEARCH · Search NASA

Results for “Video Recording”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Rain cell statistics experiment

Communication links suffer from interference caused by precipitation along the transmission path. Terminals established to take advantage of space diversity must be spaced in a manner dependent on rain intensities, rain cell sizes, and spacings. A NASA sponsored radar experiment was conducted at Wallops Island, Va. in 1972 and 1973 to provide statistical data on rain shower intensities and their geometrical properties. The objectives of the experiment were to determine the statistics of the field of rain cells in terms of cell size, intensity, spacing, number density, and altitude dependence, and to find the detailed structure of individual cells leading to a model of an individual cell. The experimental system is described, emphasizing the frequency diversity aspects, the computer control of the antenna, and the digital and analog video recording.

Katz, I.↗
NASA NTRS1975

Sector-scanning echocardiography

The mechanical sector scanner is described in detail, and its clinical application is discussed. Cross sectional images of the heart are obtained in real time using this system. The sector scanner has three major components: (a) hand held scanner, (b) video display, and (c) video recorder. The system provides diagnostic information in a wide spectrum of cardiac diseases, and it quantitates the severity of mitral stenosis by measurement of the mitral valve orifice area in diagnosing infants, children and adults with cyanotic congenital heart disease.

Henry, W. L.↗
NASA NTRS1980

High resolution imaging at large telescopes

Image recovery at a resolution limited only by diffraction is now possible at large telescopes. The theory of speckle image reconstruction is explained and the current status of a video recording and digitization system for the reconstruction procedure is described. Potential applications of the process when used with very large telescopes are discussed. The constraints on telescope design imposed by these techniques are listed.

Nisenson, P.↗
NASA NTRS1981

Description and discussion of the NRL TGDCC

The NRL thermal gradient diffusion cloud chamber (TGDCC) consists of two plates 7.5 cm in diameter separated by 1.25 cm and covered with saturated filter paper. The cylindrical wall separating the plates is glass. The top plate is at room temperature and the bottom plate is cooled with a thermoelectric cooler. The temperature difference is measured with several sets of thermocouples. The CCN concentration was determined from the video recording. This procedure of averaging the maximum count obtained on several successive recordings at the same supersaturation results in concentrations which are somewhat higher than concentrations calculated from an average across the plateau.

Hoppel, W. A.↗
NASA NTRS1983

Measurement of reach envelopes with a four-camera Selective Spot Recognition (SELSPOT) system

The basic Selective Spot Recognition (SELSPOT) system is essentially a system which uses infrared LEDs and a 'camera' with an infrared-sensitive photodetector, a focusing lens, and some A/D electronics to produce a digital output representing an X and Y coordinate for each LED for each camera. When the data are synthesized across all cameras with appropriate calibrations, an XYZ set of coordinates is obtained for each LED at a given point in time. Attention is given to the operating modes, a system checkout, and reach envelopes and software. The Video Recording Adapter (VRA) represents the main addition to the basic SELSPOT system. The VRA contains a microprocessor and other electronics which permit user selection of several options and some interaction with the system.

Stramler, J. H., Jr.↗
NASA NTRS1986

The orbit properties of colliding co-orbiting bodies

It is generally assumed that an ensemble of small bodies located in similar Keplarian orbits will, because of collisions, tend to disperse into more and more dissimilar orbits. For example, it is thought that the asteroids may represent the remnants of a few larger bodies that broke up or failed to fully accrete. A proposed experiment using the space station consists of an ensemble of small bodies or particles released gently from a central location in a large chamber, much like the breaking of billiard balls. The particles would them co-orbit and occasionally collide. Their subsequent behavior could be monitored by several video recorders, their linear and angular velocities before and after collision calculated, and their general behavior studied. This experiment could yield results of fundamental importance for theories of the origin of the planets, asteroids, comets, and probably ring systems.

Freeman, J. W.↗
NASA NTRS1985

Development and testing of advanced fire-resistant photovoltaic modules

The evaluation of back-surface materials flammability in order to identify fire resistant module designs is examined. The fire test apparatus, burning-brand test sequence, and spread-of-flame test sequence are described. Video recordings and time-temperature profiles of module back surfaces are utilized to study the flammability failure mechanism and identify high-temperature materials. A table of flammability test results for various module designs is provided. The data reveals that 2-mil kapton, fiberglass cloth coated or impregnated with a material to plug pores, and metal foil back-surface materials achieve class A and B fire-resistance levels, and are applicable for photovoltaic module designs.

Sugimura, R. S.↗
NASA NTRS1987

Radar Time-Base and Pseudonoise Generator

Long pulses effectively compressed by pseudonoise technique. Computer-controlled, polynomial-driven time-base and pseudonoise generator enables radar system to achieve range resolution of about 80 m with radar pulses of 1-s duration. Normally, unmodulated 1-s pulse has relatively coarse range resolution of several thousand kilometers. Radar system effectively compresses modulated pulse into one of 100-ns pseudonoise-modulating pulses. Intended primarily for use with interplanetary radar, time-base/pseudonoise concept proves useful in test instruments or in time-base correction for video recording.

Brokl, S. S.↗
NASA NTRS1987

High-resolution heat-transfer-coefficient maps applicable to compound-curve surfaces using liquid crystals in a transient wind tunnel

Tests were performed in a transient heat transfer tunnel in which the model under test was preheated prior to allowing room temperature air to be suddenly drawn over the model. The resulting movement of isothermal contours on the model is revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record is obtained of a temperature and time data pair for all points on the model during a single test. Experiments on a duct model are reported in which the model was preheated using a hot air stream. A manner in which initial model temperature nonuniformities could be taken into account was investigated. The duct model was also tested with a steady-state measurement technique and results were compared with the transient measurements, but recognizing that differences existed between the upstream thermal boundary conditions. The steady-state and transient measurements were shown to be consistent with predicted values. The main advantage of this transient heat transfer technique using liquid crystals is that since the test model need not be actively heated, high-resolution measurements on surfaces with complex shapes may be obtained.

Jones, T. V.↗
NASA NTRS1988

High-resolution heat-transfer-coefficient maps applicable to compound-curve surfaces using liquid crystals in a transient wind tunnel

Tests were performed in a transient heat transfer tunnel in which the model under test was preheated prior to allowing room temperature air to be suddenly drawn over the model. The resulting movement of isothermal contours on the model is revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record is obtained of a temperature and time data pair for all points on the model during a single test. Experiments on a duct model are reported in which the model was preheated using a hot air stream. A manner in which initial model temperature nonuniformities could be taken into account was investigated. The duct model was also tested with a steady-state measurement technique and results were compared with the transient measurements, but recognizing that differences existed between the upstream thermal boundary conditions. The steady-state and transient measurements were shown to be consistent with predicted values. The main advantage of this transient heat transfer technique using liquid crystals is that since the test model need not be actively heated, high-resolution measurements on surfaces with complex shapes may be obtained.

Jones, Terry V.↗
NASA NTRS1988

Field study of communication and workload in police helicopters - Implications for AI cockpit design

This paper reports on the work performed by civilian helicopter crews, using audio and video recordings and a variety of workload measures (heart rate and subjective ratings) obtained in a field study of public service helicopter missions. The number and frequency of communications provided a significant source of workload. This is relevant to the design of automated cockpit systems, since many designs presuppose the use of voice I/O systems. Fluency of communications (including pauses, hesitation markers, repetitions, and false starts) furnished an early indication of the effects of fatigue. Three workload measures were correlated to identify high workload segments of flight, and to suggest alternate task allocations between crew members.

Linde, Charlotte↗
NASA NTRS1990

Contamination of spacecraft by recontact of dumped liquids

Liquids partially freeze when dumped from spacecraft producing particles which are released into free space at various velocities. Recontact of these particles with the spacecraft is possible for specific particle sizes and velocities and, therefore, can become contamination for experiments within the spacecraft or released experiments as a result of waste and potable water dumped from Space Shuttle. An examination of dump characteristics was conducted on STS-29 using both on-board video records and ground based measurements. A preliminary analysis of data from this flight indicates particle velocities are in the range of 30 to 75 ft/sec and recontact is possible for limited particle sizes.

Fowler, M. E.↗
NASA NTRS1991

Airborne Laser Polarization Sensor

Instrument measures polarization characteristics of Earth at three wavelengths. Airborne Laser Polarization Sensor (ALPS) measures optical polarization characteristics of land surface. Designed to be flown at altitudes of approximately 300 m to minimize any polarizing or depolarizing effects of intervening atmosphere and to look along nadir to minimize any effects depending on look angle. Data from measurements used in conjunction with data from ground surveys and aircraft-mounted video recorders to refine mathematical models used in interpretation of higher-altitude polarimetric measurements of reflected sunlight.

Kalshoven, James, Jr.↗
NASA NTRS1991

Damage to metallic samples produced by measured lightning currents

A total of 10 sample disks of 2024-T3 aluminum and 4130 ferrous steel were exposed to rocket-triggered lightning currents at the Kennedy Space Center test site. The experimental configuration was arranged so that the samples were not exposed to the preliminary streamer, wire-burn, or following currents that are associated with an upward-initiated rocket-triggered flash but which are atypical of naturally initiated lightning. Return-stroke currents and continuing currents actually attaching to the sample were measured, augmented by close-up video recordings of approximately 3 feet of the channel above the sample and by 16-mm movies with 5-ms resolution. From these data it was possible to correlate individual damage spots with streamer, return-stroke, and continuing currents that produced them. Substantial penetration of 80-mil aluminum was produced by a continuing current of submedian amplitude and duration, and full penetration of a 35-mil steel sample occurred under an eightieth percentile continuing current. The primary purpose of the data acquired in these experiments is for use in improving and quantifying the fidelity of laboratory simulations of lightning burnthrough.

Fisher, Richard J.↗
NASA NTRS1991

A study of high alpha dynamics and flow visualization for a 2.5-percent model of the F-18 HARV undergoing wing rock

Free-to-roll experiments and flow visualization studies have been conducted for a 2.5-percent model of the F-18 undergoing unsteady wing rock oscillations. Data have been acquired in the form of roll angle time histories as well as video recordings and 35 mm photography of the forebody and leading edge extension vortices. The time histories were differentiated to produce angular velocity and angular acceleration. From this the roll moment as a function of time and/or roll angle could be estimated. A thorough analysis of the data has revealed a genuine wing-rock phenomenon. Off-surface flow visualization was used to identiify the forebody and LEX vortex core positions and their interaction in both static and dynamic configurations. A direct correlation between the dynamic data and visualized vortex activity during the wing-rock motion has been made.

Quast, Thomas↗
NASA NTRS1991

Process modeling KC-135 aircraft

Instrumentation will be provided for KC-135 aircraft which will provide a quantitative measure of g-level variation during parabolic flights and its effect on experiments which demonstrate differences in results obtained with differences in convective flow. The flight apparatus will provide video recording of the effects of the g-level variations on varying fluid samples. The apparatus will be constructed to be available to fly on the KC-135 during most missions.

Workman, Gary L.↗
NASA NTRS1992

A spaceflight experiment to investigate the effects of a range of unilateral blue light phototropic stimulations on the movements of wheat coleoptiles (6-IML-1)

In 1978, in response to an announcement of opportunity by NASA, two independent groups proposed related investigations to study the response of seedling plants to photostimulations at microgravity. The spaceflight experiment is known by its NASA acronym, FOTRAN. The scientific objectives behind the experiment are outlined, and a brief description of the spaceflight equipment and the experimental procedures developed to accomplish the aims of the experiment are presented. By reference to the results of ground-based studies, the likely scientific returns of the FOTRAN experiment will be assessed. The experiment is designed to investigate the effects of a range of blue light stimulations on the movements of wheat coleoptiles at zero-g. The seedlings will be dark-grown, and their movements assessed from infrared time-lapse video recordings made during flight. The photostimulus may be expected to modulate circumnutations of the coleoptiles, by synchronizing, initiating or amplifying these rhythmic movements, and to initiate the classic phototropic response.

Heathcote, David G.↗
NASA NTRS1992

Mechanical design of a rotary balance system for NASA. Langley Research Center's vertical spin tunnel

A new, lightweight Rotary Balance System is presently being fabricated and installed as part of a major upgrade to the existing 20-Foot Vertical Spin Tunnel (Figure 1) located at NASA's Langley Research Center. This upgrade, to improve model testing productivity of the only free-spinning vertical wind tunnel in the Western Hemisphere, includes a modern fan/drive and tunnel control system, an updated video recording system, and the new rotary balance system. The rotary balance is a mechanical apparatus which enables the measurement of aerodynamic force and moment data under spinning conditions (100 rpm). This data is used in spin analysis and is vital to the implementation of large amplitude maneuvering simulations required for all new high performance aircraft. The present system is over 40 years old and is worn beyond acceptable tolerances, as well as being susceptible to frequent breakdowns. It has serious limitations in model weight, position adjustment and spin-rate capabilities. The new rotary balance system described in this report will permit greater test efficiency and improved data accuracy. Rotary Balance testing with the model enclosed in a tare bag can also be performed to obtain resulting model forces from the spinning operation. The rotary balance system will be stored against the tunnel sidewall during free-flight model testing.

J. W. Allred↗