Search NASA⌕ Search

SEARCH · Search NASA

Results for “Visual platforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Nonlinear, Human-Centered Approach to Motion Cueing with a Neurocomputing Solver

This paper discusses the continuation of research into the development of new motion cueing algorithms first reported in 1999. In this earlier work, two viable approaches to motion cueing were identified: the coordinated adaptive washout algorithm or 'adaptive algorithm', and the 'optimal algorithm'. In this study, a novel approach to motion cueing is discussed that would combine features of both algorithms. The new algorithm is formulated as a linear optimal control problem, incorporating improved vestibular models and an integrated visual-vestibular motion perception model previously reported. A control law is generated from the motion platform states, resulting in a set of nonlinear cueing filters. The time-varying control law requires the matrix Riccati equation to be solved in real time. Therefore, in order to meet the real time requirement, a neurocomputing approach is used to solve this computationally challenging problem. Single degree-of-freedom responses for the nonlinear algorithm were generated and compared to the adaptive and optimal algorithms. Results for the heave mode show the nonlinear algorithm producing a motion cue with a time-varying washout, sustaining small cues for a longer duration and washing out larger cues more quickly. The addition of the optokinetic influence from the integrated perception model was shown to improve the response to a surge input, producing a specific force response with no steady-state washout. Improved cues are also observed for responses to a sway input. Yaw mode responses reveal that the nonlinear algorithm improves the motion cues by reducing the magnitude of negative cues. The effectiveness of the nonlinear algorithm as compared to the adaptive and linear optimal algorithms will be evaluated on a motion platform, the NASA Langley Research Center Visual Motion Simulator (VMS), and ultimately the Cockpit Motion Facility (CMF) with a series of pilot controlled maneuvers. A proposed experimental procedure is discussed. The results of this evaluation will be used to assess motion cueing performance.

Telban, Robert J.↗

The Nasa Multiscale Analysis Tool: an Enabling Platform for Achieving Vision 2040

Vision 2040 is a community-driven consensus document, written in 2018, aimed at defining the potential 25-year future state required for performing integrated multiscale modeling of materials and systems for future aerospace and aeronautical applications. Nine Vision Key Elements (KEs) were defined along with associated technical gaps. This paper will address current NASA GRC research efforts utilizing the NASA Multiscale Analysis Tool (NASMAT). This paper will specifically focus on NASMAT’s ability to address gaps in three of the nine Vision 2040 KEs: 1) Models and Methods, 2) Multiscale Measurements and Characterization Tools and Methods, and 6) Data, Informatics, and Visualization. NASMAT is a versatile platform for performing computationally efficient multiscale analyses of heterogeneous materials. NASMAT offers the user flexibility to define an arbitrary number of length scales (levels) where a variety of micromechanics theories can be implemented at each level. Micromechanics theories can be selected to balance accuracy and computational efficiency and range from analytical (Mori-Tanaka) to several semi-analytical (method of cells) formulations. NASMAT can also be coupled with external software and used to perform multiscale analyses of more complex structures. The paper will include a recent application of NASMAT to model a complex, three-dimensional woven composite, with a particular emphasis placed on multiscale measurements utilized to enhance the quality of the multiscale analysis. Since typical NASMAT analyses can be completed in on the order of seconds to minutes, a second example will demonstrate NASMAT’s ability to generate large quantities of data useful for sensitivity analysis, uncertainty quantification, or machine learning applications. Current progress on developing multiscale data visualization tools will also be addressed along with the challenges associated with and proposed solutions for sifting through large amounts of data. These examples will demonstrate that NASMAT is an enabling platform for achieving the goals in Vision 2040.

Vision 2040↗

A browse facility for Earth science remote sensing data: Center director's discretionary fund final report

An image data visual browse facility is developed for a UNIX platform using the X Windows 11 system. It allows one to visually examine reduced resolution image data to determine which data are applicable for further research. Links with a relational data base manager then allow one to extract not only the full resolution image data, but any other ancillary data related to the case study. Various techniques are examined for compression of the image data in order to reduce data storage requirements and time necessary to transmit the data on the internet. Data used were from the WetNet project.

Meyer, P. J.↗

Sub-visual Cirrus detection and characterization

Analysis of archived cold optics (COR) radiometer data is yielding useful information on the diurnal, geographic, seasonal and altitude variability of atmospheric background radiance levels in the 11 micron window region. This database is a compilation of Kuiper Infrared Technology Experiment (KITE) and Atmospheric Radiance Study (ARS) observations under a wide variety of conditions. Correlating the measurements from these two studies with the LOWTRAN model code has revealed several important results. First, the 11 micron window appears to be filled-in, i.e., the troughs on either side of the nitric acid peak are shallower than expected. Second, the amplitude of the background radiances measured exceeds the model predictions by a factor of 2 to 3 or more. This is thought to be due to the existence of thin, high altitude cirrus clouds (sub-visual cirrus) above the sensor platform. These high background levels are observed under quiescent conditions in the South Pacific (Marshall Islands), as well as over the continental United States (the West Coast). In the tropics, there appears to be little diurnal variability, a plausible seasonal variation and a linear dependence between 7.2 and 11.4 micron band data, indicating possible multi-spectral approaches to detection of sub-visual cirrus clouds. Theoretical analysis of the magnitude of the effects of a sub-visual cirrus cloud on atmospheric background radiances measured by a near-horizontal sensor is in progress.

Schmidt, E.↗

An Initial Examination of Roll-Lateral Coordination Motion Requirements in Flight Simulation

A piloted simulation that examined the effects of uncoordinated roll-lateral motion cues from a coordinated math model was conducted. The vehicle model represented a typical helicopter with satisfactory handling qualities in the roll-lateral axes. The task was a two-degree-of-freedom horizontal sidestep, where the pilot controlled lateral position through roll angle. The motion platform commands were varied via two motion control system gains. One gain reduced the ratio between platform roll angle to math model (and thus visual) roll angle. The other gain was placed on how much lateral platform movement would result from platform roll attitude in an attempt to align the apparent gravity vector vertically relative to the pilot. Gains from one to zero were examined in both axes. Thus, the true 1:1 motion case, where the motion cues matched the visual cues was evaluated. Pilots subjective ratings of motion fidelity matched well against an earlier developed motion fidelity criteria. Significant differences were noted in the fixed-base versus motion base configurations.

Schroeder, Jeffery A.↗

Relationship Between Optimal Gain and Coherence Zone in Flight Simulation

In motion simulation the inertial information generated by the motion platform is most of the times different from the visual information in the simulator displays. This occurs due to the physical limits of the motion platform. However, for small motions that are within the physical limits of the motion platform, one-to-one motion, i.e. visual information equal to inertial information, is possible. It has been shown in previous studies that one-to-one motion is often judged as too strong, causing researchers to lower the inertial amplitude. When trying to measure the optimal inertial gain for a visual amplitude, we found a zone of optimal gains instead of a single value. Such result seems related with the coherence zones that have been measured in flight simulation studies. However, the optimal gain results were never directly related with the coherence zones. In this study we investigated whether the optimal gain measurements are the same as the coherence zone measurements. We also try to infer if the results obtained from the two measurements can be used to differentiate between simulators with different configurations. An experiment was conducted at the NASA Langley Research Center which used both the Cockpit Motion Facility and the Visual Motion Simulator. The results show that the inertial gains obtained with the optimal gain are different than the ones obtained with the coherence zone measurements. The optimal gain is within the coherence zone.The point of mean optimal gain was lower and further away from the one-to-one line than the point of mean coherence. The zone width obtained for the coherence zone measurements was dependent on the visual amplitude and frequency. For the optimal gain, the zone width remained constant when the visual amplitude and frequency were varied. We found no effect of the simulator configuration in both the coherence zone and optimal gain measurements.

Gracio, Bruno Jorge Correia↗

Calibration of the ARID robot

The author has formulated a new, general model for specifying the kinematic properties of serial manipulators. The new model kinematic parameters do not suffer discontinuities when nominally parallel adjacent axes deviate from exact parallelism. From this new theory the author develops a first-order, lumped-parameter, calibration-model for the ARID manipulator. Next, the author develops a calibration methodology for the ARID based on visual and acoustic sensing. A sensor platform, consisting of a camera and four sonars attached to the ARID end frame, performs calibration measurements. A calibration measurement consists of processing one visual frame of an accurately placed calibration image and recording four acoustic range measurements. A minimum of two measurement protocols determine the kinematics calibration-model of the ARID for a particular region: assuming the joint displacements are accurately measured, the calibration surface is planar, and the kinematic parameters do not vary rapidly in the region. No theoretical or practical limitations appear to contra-indicate the feasibility of the calibration method developed here.

Doty, Keith L↗

Scalable Adaptive Graphics Environment (SAGE) Software for the Visualization of Large Data Sets on a Video Wall

The use of collaborative scientific visualization systems for the analysis, visualization, and sharing of "big data" available from new high resolution remote sensing satellite sensors or four‐dimensional numerical model simulations is propelling the wider adoption of ultra‐resolution tiled display walls interconnected by high speed networks. These systems require a globally connected and well‐integrated operating environment that provides persistent visualization and collaboration services. This abstract and subsequent presentation describes a new collaborative visualization system installed for NASA's Shortterm Prediction Research and Transition (SPoRT) program at Marshall Space Flight Center and its use for Earth science applications. The system consists of a 3 x 4 array of 1920 x 1080 pixel thin bezel video monitors mounted on a wall in a scientific collaboration lab. The monitors are physically and virtually integrated into a 14' x 7' for video display. The display of scientific data on the video wall is controlled by a single Alienware Aurora PC with a 2nd Generation Intel Core 4.1 GHz processor, 32 GB memory, and an AMD Fire Pro W600 video card with 6 mini display port connections. Six mini display‐to‐dual DVI cables are used to connect the 12 individual video monitors. The open source Scalable Adaptive Graphics Environment (SAGE) windowing and media control framework, running on top of the Ubuntu 12 Linux operating system, allows several users to simultaneously control the display and storage of high resolution still and moving graphics in a variety of formats, on tiled display walls of any size. The Ubuntu operating system supports the open source Scalable Adaptive Graphics Environment (SAGE) software which provides a common environment, or framework, enabling its users to access, display and share a variety of data‐intensive information. This information can be digital‐cinema animations, high‐resolution images, high‐definition video‐teleconferences, presentation slides, documents, spreadsheets or laptop screens. SAGE is cross‐platform, community‐driven, open‐source visualization and collaboration middleware that utilizes shared national and international cyberinfrastructure for the advancement of scientific research and education.

Jedlovec, Gary↗

Immersive Digital Twin Laboratory for Engineering Education (CRADA Final Report)

This project aimed to create an immersive digital twin laboratory that incorporates advanced tracking and visualization capabilities. In collaboration with Fort Lewis College, NREL designed a state-of-the-art physical visualization laboratory, developed a software platform to enable interaction with tracked physical objects in the laboratory, and provided proof-of-concept curricula that included manipulating these tracked objects. The project was initiated to address the growing need for innovative educational tools in engineering education. As renewable energy systems, particularly solar installations, become more complex, there is a pressing need to bridge the gap between theoretical knowledge and practical application. Traditional methods of teaching solar engineering concepts often fall short of providing students with a comprehensive, hands-on understanding. This immersive digital twin laboratory was conceived to fill that gap by creating a safe, non-energized setting where students can interact with augmented solar installation objects, gaining valuable insights into system performance, design, and maintenance. The project utilized extended reality (XR) technologies, including head-mounted displays (HMDs) and a whole-room optical motion tracking system, to connect physical objects with their digital twins in real time. The laboratory was equipped with MagicLeap 2 HMDs, supported by a Vicon Vero 2.2 Optical Tracking System, which provided precise 6-degrees-of-freedom (6-DOF) tracking. We developed a software platform to manage the interaction between the tracked physical objects and their virtual counterparts, enabling real-time data synchronization, object recognition, and virtual overlays. We designed the system to be flexible and extendable, allowing for future integration of additional objects and curriculum. This research advances the field of engineering education by demonstrating the potential of immersive digital twin environments. The laboratory provides a dynamic learning space where students can experiment, collaborate, and learn without the risks associated with live experimentation. The ability to simulate and manipulate solar installation objects under various conditions has broad implications for workforce development, particularly in renewable energy. The project also highlights the economic feasibility of using XR technologies in educational settings, offering a cost-effective solution for institutions looking to enhance their curriculum. By fostering a deeper understanding of solar energy systems, this work contributes to the broader goal of supporting the global energy transition and preparing the next generation of engineers and technicians.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Battery Lifecycle Framework

The Battery Lifecycle (BLC) Framework is an open-source platform that provides tools to visualize and share battery data from material characterization, cell testing, manufacturing, and field testing through the technology development cycle. BLC has three components: data importers, a front-end for querying the data and creating visualizations, and an application programming interface to provide access to the data from Python. BLC has been deployed for tracking the development of a battery from the lab to a manufacturing line and systems installed in the field and for comparing studies of multiple cells of the same battery chemistry and configuration. The code was developed around Redash, a robust open-source extract-transform-load engine. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2021-4546 O

De Angelis, Valerio↗

Ziti (Ziti Client) [SWR-25-91]

Ziti is a NOODLES client application for RealityKit-powered devices (specifically the Apple Vision Pro). NOODLES is a cross-platform/device/tool protocol for collaborative visualization. NOODLES was Developed at the National Renewable Energy Laboratory (NREL) as a capability of the Insight Center https://www.nrel.gov/computational-science/insight-center.html

Brunhart-Lupo, Nicholas [National Renewable Energy↗

Web-Based Tools for Data-Informed Remedy Optimization: Software Theory and User Guide

This report documents the development and application of two web-based decision-support tools for pump-and-treat (P&T) groundwater remediation systems: PTOLEMY (Pump-and-Treat Optimized Location Evaluation to Maximize Yields) and OPTIMA (Optimization for Pump-and-Treat Implementation, Management, & Assessment). These tools enhance remedy design and management by leveraging advanced computational methods – specifically deep learning and multi-objective optimization – within a user-friendly platform. By integrating data-driven models with established hydrogeological knowledge, PTOLEMY and OPTIMA enable more efficient evaluation of well placement and operational strategies, helping site managers balance multiple remediation objectives under complex conditions. Both tools are implemented as modules within the SOCRATES (Suite Of Comprehensive Rapid Analysis Tools for Environmental Sites) web platform, which provides data access, visualization, and analytics to support remedy optimization across sites in the U.S. Department of Energy Office of Environmental Management complex. PTOLEMY is a rapid screening module designed to identify promising locations for new extraction wells. It employs a multi-channel three-dimensional convolutional neural network (MC3D-CNN) trained on high-fidelity simulation data to predict the relative performance (in terms of contaminant mass recovery) of potential well sites. Through an interactive web interface, PTOLEMY visualizes the probability of high performance across a site, highlighting areas where an extraction well is likely to yield above-threshold contaminant removal over a multi-year period. PTOLEMY’s map-based displays and exportable results support transparent communication of screening analyses. By focusing attention on the most favorable candidate locations, the tool augments traditional engineering judgment and physics-based modeling, providing a data informed basis for subsequent detailed evaluations. OPTIMA is a multi objective optimization module designed to find wellfield layouts and operating schedules that meet various cleanup goals. It quickly evaluates thousands of candidate setups – combinations of well locations, timing, and rates – and returns a small set of best trade-off options for comparison. At its core, OPTIMA uses a U-Net-based surrogate model – a deep-learning emulator of a groundwater flow and transport simulator – to dramatically accelerate scenario evaluations. Coupling this fast surrogate with the NSGA-II (Non-dominated Sorting Genetic Algorithm II) evolutionary algorithm, OPTIMA explores a wide decision space of well locations and schedules to identify Pareto-optimal solutions that trade off key objectives (e.g., minimizing cleanup time, maximizing contaminant mass removal, and minimizing plume extent). The tool outputs a family of optimal configurations and visualizes their trade-offs (Pareto frontiers of cleanup metrics and maps of optimized well placements). Site managers can use these results to understand the range of viable strategies and to select candidate designs for more detailed verification. OPTIMA is currently under active development and not yet fully released; this guide provides early documentation to support planning and gather user feedback.

54 ENVIRONMENTAL SCIENCES↗

Produced Water DNA Database (PW-DNA): Utilizing KBase to generate an environmental specific curated molecular database

The deep subsurface is estimated to host the majority of Earth’s microbial biomass yet remains one of the most challenging environments to access and study. One common approach to investigate these microbial communities is through the analysis of produced water from subsurface reservoirs, where researchers can assess water and gas chemistry along with molecular (DNA/RNA) sequence data. Advances in high-throughput sequencing have greatly expanded our understanding of these environments and their biotechnological potential. However, further progress requires large-scale, integrative meta-analyses across diverse datasets. To address this need, we developed the Produced Water-DNA (PW-DNA) Database, a curated, publicly available resource that consolidates microbial DNA/RNA sequences, geochemical data, and relevant metadata from in situ hydrocarbon environments such as coal beds, oil reservoirs, and natural gas systems. The PW-DNA database delivers three core benefits to the research community: (1) it improves data sharing by linking environmental microbial datasets with corresponding geochemical parameters, enabling more robust filtering and analysis; (2) it connects with complementary research databases to promote broader dissemination and interoperability; and (3) it supports technological innovation by serving as a resource for identifying microbial trends and exploring genetic potential. While individual studies have highlighted basin-specific microbial communities and functional redundancy in biogeochemical cycling, a comprehensive, system-wide perspective is needed to better understand connectivity and novelty across subsurface ecosystems. By designing the PW-DNA in the KBase platform, we provide a reproducible, visual framework for integrating large-scale genomic and geochemical data, enabling researchers to perform more informed analyses and experimental design. Ultimately, this resource enhances the ability to identify, characterize, and interpret microbial functions across diverse subsurface environments, thereby accelerating discovery in subsurface microbiology and biotechnology.

59 BASIC BIOLOGICAL SCIENCES↗

Spaceflight Biospecimen Sharing in Support of Science Discovery and Exploration

For decades, NASA and international partners have flown non-human biological experiments in space to understand the effects of spaceflight and address potential biological hazards. Sending organisms into space is a costly endeavor which makes space-flown biological specimens a valuable resource. To enable maximum scientific return, samples not required by the Principal Investigators are harvested and collected mostly by NASA’s Space Biology Biospecimen Sharing Program. These specimens are collected according to well-established SOPs that maintain quality and integrity. The specimens are then preserved, archived, and made available to the international scientific community through NASA’s Institutional Scientific Collection (ISC) at Ames Research Center (ARC). The ISC-ARC biospecimens and descriptive metadata are findable and accessible for request through the Life Sciences Data Archive (LSDA). The NASA ISC-ARC currently stores over 32,000 specimens from Shuttle, International Space Station, and ground-based investigations (spaceflight analog experiments involving either hindlimb unloading, centrifugation, or partial weight-bearing study designs). Tissues are predominantly from mice and rats, though samples are also available from bacteria and quail. The specimens include tissues from many physiological systems including musculoskeletal, neurosensory, reproductive, respiratory, circulatory, and digestive. Tissues are stored at -80°C, -20°C, +4°C, or ambient and preserved in various fixatives. Descriptive metadata is available for all samples. Historically, these tissues have been used for a wide range of analyses, including histology, genomics, and transcriptomics. Plans are underway to expand the ISC-ARC beyond the mostly-rodent contents, to include a space-relevant microbial culture collection including bacteria, fungi, and yeast. This expansion of the ISC-ARC will now involve identifying and standardizing best practices for microbial curations. To ensure safe long-term storage of microbial isolates, a microbiology laboratory will be dedicated for identification, cell culture, and lyophilization. Awarding of tissue to public science investigators has resulted in 33 publications since 2011, with 48 requests being submitted since 2016. Of note, NASA GeneLab has been awarded ISC-ARC biospecimens in the past few years. GeneLab processes the biospecimens to generate various levels of ‘omics’ data, which are published on GeneLab’s open access online platform for bioinformatics analysis and visualization. This has helped a systems biology community grow around the processed-biospecimens’ datasets, resulting in many new publications and insights. Websites: https://www.nasa.gov/ames/research/space-biosciences/isc-bsp ; https://lsda.jsc.nasa.gov/Biospecimen

Ryan T. Scott↗

Cooperative Upper Class E Airspace: Concept of Operations and Simulation Development for Operational Feasibility Assessment

Upper Class E Traffic Management (ETM) is a novel community-based traffic management concept incorporating the FAA, NASA, and industry’s collaborative efforts to support safe, efficient, and scalable future operations in the airspace near and above 60,000 ft. The concept complements Air Traffic Control (ATC) infrastructure and Air Traffic Management (ATM) services by facilitating cooperative operations with ETM provided services. This paper presents an initial Cooperative Separation Management (CSM) concept for High Altitude Long Endurance (HALE) vehicles’ conflict detection and resolution during their extended operations. A prototype simulation platform has been developed to visualize and assess the concept during demonstrations to stakeholders. Further development plans for simulations and the CSM concept are discussed.

upper Class E airspace↗

Cooperative Upper Class E Airspace: Concept of Operations and Simulation Development for Operational Feasibility Assessment

Upper Class E Traffic Management (ETM) is a novel community-based traffic management concept incorporating the FAA, NASA, and industry’s collaborative efforts to support safe, efficient, and scalable future operations in the airspace near and above 60,000 ft. The concept complements Air Traffic Control (ATC) infrastructure and Air Traffic Management (ATM) services by facilitating cooperative operations with ETM provided services. This paper presents an initial Cooperative Separation Management (CSM) concept for High Altitude Long Endurance (HALE) vehicles’ conflict detection and resolution during their extended operations. A prototype simulation platform has been developed to visualize and assess the concept during demonstrations to stakeholders. Further development plans for simulations and the CSM concept are discussed.

upper Class E airspace↗

Assessing the Needs of NASA's Near Real-Time Earth Observation Products

"The 2017-2027 Decadal Survey for Earth Science and Applications from Space stated that NASA's Earth Science with planned implementation of applications provides sustained earth observations for societal benefits [1]. The Decadal Survey indicated that data latency is invaluable for time-sensitive applications including disaster risk reduction, wildland fire carbon emissions quantification, real-time measurements of the state of the hydrologic systems and many more. Data latency refers to the time between earth observation and data products available to users. During the past 13 years, NASA's Land, Atmosphere Near Real-Time Capability for Earth Observing Systems (LANCE) continues to provide free access to earth observation products that are made available much quicker than routine processing allows. The latency of most LANCE data products is Near Real-time (NRT) which is defined as less than three hours from satellite observations [2]. LANCE is managed by the Earth Science Data and Information System (ESDIS) Project at NASA Goddard Space Flight Center [3], and a User Working Group (UWG) is responsible for providing guidance to LANCE. LANCE data are used by direct users and brokers who add value to the data [4]. NASA Earth Applied Sciences Program (ASP) is one of the primary users of LANCE, which collaborates with partner organizations and provides support to scientists to solve problems in applications of earth observations. ASP promotes the use of LANCE NRT data products to demonstrate applications in decision making, facilitates end-user feedback to the science team to improve data products, and provides information on future demands for research. LANCE supports applications that need a rapid response including detecting wildland fires and volcanic eruptions, tracking smoke, ash and dust plumes, monitoring air quality and tracking extreme weather events such as hurricanes, landslides, and floods. To gather feedback regarding the availability, accessibility and actionability of NASA's NRT data products for societal benefit, three surveys and a few discussions with experts involved in the topic within ASP were conducted from the perspective of users. Feedback has been collected from users who are interested in using low latency NASA data within application communities of agriculture, disasters, water resources, health and air quality, ecological conservation, wildland fires and capacity building. Analysis-ready NRT data products in a variety of formats have been mentioned many times in the collected feedback, especially for applied users with little to no experience using research-grade earth observation products. Users prefer to have products that can be easily integrated into their existing workflows and take their analysis to the data. HDF5 is a commonly used data format for research, but typically requires some conversion to a more friendly format for applications and regular use in decision-making. Users prefer the GeoTIFF data format that can be directly ingested into a GIS mapping software and platform for data analysis and visualization. For example, LANCE’s fire, flood, SO2 and Black Marble Nighttime Blue/Yellow Composite data products have been integrated into NASA Disasters Mapping Portal, which is an GIS-based open data portal, for users in the disaster management community. There are 291 LANCE NRT layers available through GIBS and Worldview, where users can download a snapshot in GeoTIFF format. Operational users expect data to be processed as close to the user as possible. The collected feedback indicates that LANCE fire products within 3 hours latency would meet the needs of the wildland fire community. The ideal latency for volcanic application is 10-15 minutes. Users in Volcanic Ash Advisory Centers (VAAC) reported that the first forecast volcanic product should be issued within 75 minutes from the volcano eruption [5]. Overall, for disaster applications, data latency within 3 hours is useful while latency greater than 12 hours is not timely enough for operational use. Capacity building and training are critical for users to be able to access, interpret and use data products and tools for their decision making, especially for applied users with limited experience using earth observation products. LANCE data products have been used in a number of capacity building projects domestically and internationally [6]. As LANCE continues to bring new products into the system, users request training to utilize LANCE new and upcoming data products and capabilities in their applications. Due to the limitation of bandwidth and downstream flow paths, users in some developing countries need tools to select and download data for a specific area of interest instead of bulk downloads. The collected feedback also shows the lack of available SAR satellite low latency data products. The advantages of SAR to monitor conditions and changes on the ground through darkness, clouds, volcanic ash, and other atmospheric conditions, are appealing to low latency users. For example, terabytes of low latency but cloudy optical images are not helpful in rapidly identifying the extent of flood or fire impacts. LANCE could be complemented with low latency measurements via the upcoming NASA-ISRO Synthetic Aperture Radar (NISAR) mission [7]. Requests for higher spatial resolution products are expressed. A user from the wildland fire management community reported that products with 30-m spatial resolution could be used to detect small fires. The 30-m Landsat OLI fire data is now part of NASA’s Fire Information for Resource Management System (FIRMS) US/Canada [8]. Within the open and free NASA resources, LANCE disseminates NRT data products in a manner that allows them to be accessible and understandable to both scientific and applied users. In many application areas, latency plays an important or even decisive role where low latency earth observations help people to observe areas of interest, detect and track changes in the environment and make timely decisions. NASA’s Earth Applied Sciences Program promotes the use of LANCE NRT products and builds a bridge between application users and research teams. The collected feedback indicates data latency within 3 hours is useful for most of the applications, and shows the needs of user-friendly, analysis-ready products, and requests training on LANCE’s new and upcoming data products. User feedback has been provided to LANCE UWG for guidance and recommendations, and for translating findings into something actionable.

Tian Yao↗

Bringing chemical structures to life with augmented reality, machine learning, and quantum chemistry

Visualizing 3D molecular structures is crucial to understanding and predicting their chemical behavior. However, static 2D hand-drawn skeletal structures remain the preferred method of chemical communication. Here, we combine cutting-edge technologies in augmented reality (AR), machine learning, and computational chemistry to develop MolAR, an open-source mobile application for visualizing molecules in AR directly from their hand-drawn chemical structures. Users can also visualize any molecule or protein directly from its name or protein data bank ID and compute chemical properties in real time via quantum chemistry cloud computing. MolAR provides an easily accessible platform for the scientific community to visualize and interact with 3D molecular structures in an immersive and engaging way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗