Search NASA⌕ Search

SEARCH · Search NASA

Results for “WINGS, COMPLETE - THEORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1956

Turbulent shear spectra and local isotropy in the low-speed boundary layer

From measurements of turbulent shear spectra together with previously reported longitudinal turbulent energy spectra, the concept of local isotropy in a low-speed boundary layer was examined. Results of these measurements and measurements of the time derivatives of turbulent velocities in the x- and y- directions for various frequency bands showed no evidence of local isotropy in the boundary layer. Several methods (based on isotropy) of evaluating the turbulent dissipation term failed to give consistent answers, further emphasizing a lack of local isotropy.

BOUNDARY LAYER - COMPLETE WINGS↗
NASA NTRS1956

Flight Investigation of the Stability and Control Characteristics of Vertically Rising Airplane Research Model with Swept or Unswept Wings and X- or +-tails

The take-off, landing, hovering, and transition flight characteristics of a propeller-driven, fighter-type, vertically rising airplane model were obtained from time histories of the flights and from the pilots' opinions of the flight characteristics. In general, there were no major differences in the behavior of any of the configurations, all of which performed satisfactorily.

CONTROL, LATERAL↗
NASA NTRS1957

Hydrodynamic characteristics over a range of speeds up to 80 feet per second of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion

Results of an investigation of the hydrodynamic characteristics over an extended speed range of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion are presented. Comparisons between these data and data over a lower speed range on a similar aspect-ratio-0.25 flat plate but having one-half the thickness are presented. These comparisons show no significant differences at the low speeds. At high speeds and high angles of attack, where extensive cavitation was present, the lift coefficients were lower than would have been indicated by the results of the previous investigations and the present investigation at the lower angles of attack. A brief discussion and comparison of ventilation are presented which shows two types of planing bubble formation and the effect of increasing the thickness of the model on the ventilation boundary.

REYNOLDS NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1951

Wire Cloth as Porous Material for Transpiration-cooled Walls

The permeability characteristics and tensile strength of a porous material developed from stainless-steel corduroy wire cloth for use in transpiration-cooled walls where the primary stresses are in one direction were investigated. The results of this investigation are presented and compared with similar results obtained with porous sintered metal compacts. A much wider range of permeabilities is obtainable with the wire cloth than with the porous metal compacts considered and the ultimate tensile strength in the direction of the primary stresses for porous materials produced from three mesh sizes of wire cloth are from two to three times the ultimate tensile strengths of the porous metal compacts.

MATERIALS - TYPES↗
NASA NTRS1953

Influence of End Plates on Lift and Flow Field of a Canard-type Control Surface at a Mach Number of 2.00

The influence of triangular-shaped end plates on the lift and the flow field of a canard-type control surface mounted on a symmetrical fuselage was investigated in the Lewis 8- by 6-foot supersonic wind tunnel at a Mach number of 2.00, body angle of attack of 2 degrees, and control-surface deflection angles of 3 degrees, 6 degrees, 8 degrees, and 10 degrees. The investigation demonstrated that the addition of end plates to a canard-type control surface increased its lift and rearranged the single vortex into a two-vortex system. Perforating the end plates reduced these effects and resulted in a decrease in lift and a change in the flow-field characteristics.

DIHEDRAL - COMPLETE WINGS↗
NASA NTRS1951

Lateral Control by Spoilers at the DVL

The present report describes the development of spoiler control at the DVL from the end of 1936 until the beginning of 1939. The authors are fully aware that the present report also forms only a contribution to the problem of spoiler control and offers at best a possibility of extrapolation regarding the behavior of the control in modern airplanes. A modern airplane (Me 109) is being reconstructed for conversion to spoiler control. Experience has shown, however, that the construction and testing of such a model requires at least a year. Thus it seems appropriate to report summarily now in order to keep the understanding and cooperation of the interested departments aroused. The following reports are only a section of a long development partly evolved abroad.

CONTROLS, SPOILERS - COMPLETE WINGS↗
NASA NTRS1961

Static Lateral Characteristics at High Subsonic Speeds of a Complete Airplane Model with a Highly Tapered Wing having the 0.80 Chord Line Unswept and with Several Tail Configurations

An investigation was made at high subsonic speeds of a complete model having a highly tapered wing and several tail configurations. The aspect-ratio-3.50 wing had a taper ratio of 0.067 and an unswept 0.80 chord line. The complete model was tested with a wing-chord-plane tail, a T-tail, and a biplane tail (combined T-tail and wing-chord-plane tail). The model was tested in the Langley high-speed 7- by 10-foot tunnel at Mach numbers from 0.60 to 0.92 over a range of angle of attack of about +/- 20 deg. and a range of sideslip of -15 deg. to 13 deg. Some data were obtained with the horizontal stabilizer deflected. A few tests were also made with the wing tips clipped to an aspect ratio of 3.00. The data show that shock-interference effects between the tail surfaces (T-tail) can have considerable influence on the directional stability and effective dihedral. For example, the T-tail configuration with horizontal-tail leading-edge overhang showed a considerable loss in directional stability as the angle of attack was reduced to zero or negative values; whereas, the T-tail with zero leading-edge overhang showed the loss to be considerably less. The directional stability of the model with the low tail was essentially constant over a range of angle of attack of +/- 50 deg. All configurations tested showed a large reduction in stability at positive and negative angles of attack larger than about 15 deg., probably because of adverse sidewash associated with wing stall. The data show that a wing-chord-plane horizontal tail (low tail) tends to give a positive pitching-moment increment with increase in sideslip angle; whereas, a high tail (T-tail) tends to give negative increments in pitching moment.

Goodson, Kenneth W.↗
NASA NTRS1941

Observations of the Effect of Wing Appendages and Flaps on the Spread of Separation of Flow over the Wing

The spread of the separation of flow on three tapered wings insymmetrical and unsymmetrical flow was observed with silk tufts. By equal thickness and chord distribution the wings manifested a different form of lifting line. The principal result of the study was that the wings alone first disclosed complete breakdown of the flow at the tips, even the one with twist, but that after adding fuselage and engine nacelles, the twisted wing broke down completely first in the wing center. The observed boundary layer motions transverse to the main flow direction were briefly explored as to their possible influence on the spread of the separation. On top of that certain disclosures were afforded in which the transverse motions observed in the boundary layer became perceptible even above the boundary layer.

Hartwig, G↗
NASA NTRS1988

Applications of the Navier-Stokes equations to wings and complex configurations using a zonal approach

The simulation of a transonic viscous flow over a series of 3-D configurations, ranging from isolated wings to relatively complete aircraft, is presented. A fast, diagonalized Beam-Warming algorithm is used in conjunction with a zonal approach to solve the Euler/Navier-Stokes equations for these applications. The computer code, called Transonic Navier-Stokes, uses four zones for wing configurations and up to 19 zones for more complete aircraft configurations. For the inner zones adjacent to no-slip surfaces, the thin-layer Navier-Stokes equations are solved, while in the outer zones the Euler equations are solved. Numerical results are presented and compared with experiment (when available) for wing calculations and a more complete configuration based on the F-16A aircraft.

Flores, Jolen↗
DOE OSTI2021

C-AAC Occupancy and Transition Out of CMR [Slides]

This in-depth evaluation was performed in order to gather information for a plan and time estimate of C-AAC space cleanout and handover to the CMR facility once programmatic operations are relocated to other facilities. C-AAC space ownership in CMR wings 1, 5, 7, and 9 have been identified down to the Team level (see subsequent slides and other supporting documentation). This plan assumes that C-AAC activities that support Pu sustainment efforts (Wings 1, 5, and 7) are relocated to PF-4 and RLUOB in mid/end FY24 and current projects in Wing 9 are completed by the end of FY24/mid FY25 (cessation of C-AAC programmatic operations in CMR). This plan assumes that no other programmatic activities are initiated in CMR (e.g. MOX fuel rods). Timing and order of cleanout of programmatic laboratory and office spaces in wings 1, 5, and 7 is dependent upon analytical chemistry operations being established and relocated to RLUOB and PF-4. Timing and order of cleanout of programmatic laboratory and office spaces in wing 9 is dependent upon completion of current projects (MR&R, Thermo Fisher drum, etc.). As C-AAC Teams move out of the CMR building and into other facilities, the spaces occupied by those teams are planned to be targeted for in depth cleanout in the order that teams and capabilities are relocated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1990

Navier-Stokes computations about complex configurations including a complete F-16 aircraft

Transonic Navier-Stokes (TNS) code solutions gathered from the literature for three-dimensional geometries, including two different wings and a complete F-16A aircraft, are presently discussed. The TNS codes use a zonal grid approach whose number of zones vary from four to 54. The Euler equations are solved in zones away from no-slip surfaces, and the thin-layer TNS equations are solved in all zones immediately adjacent to no-slip surfaces. In the case of 'corner' zones possessing no-slip boundary conditions on two different surfaces, a thin-layer formulation along both directions is employed. Employing these features, a zonal construction with the requisite set of boundary conditions can be devised for almost any application.

Holst, Terry L.↗
NASA NTRS1982

Wind-tunnel studies of the effects of stimulated damage on the aerodynamic characteristics of airplanes and missiles

As an aid in assessing the aerodynamic effects of battle damage that might be sustained by military airplanes or missiles, several wind tunnel investigations were performed at the Langley Research Center in which damage was simulated with models by the removal of all or parts of the wing and tails. Results of the investigations indicate that the loss of a major part of the vertical tail will probably result in the loss of an airplane in any speed range. The loss of major parts of the horizontal tail generally results in catastrophic instability in the subsonic range but, at low supersonic speeds, and for some planform configurations at subsonic speeds, may allow stable flight to the extent that the airplane might return to friendly territory before the pilot must eject. The results further indicate that major damage to the wing, up to the point of the complete removal of one wing panel, and major damage to the horizontal tail may be sustained without necessarily causing the loss of the airplane or pilot.

Spearman, M. L.↗