Search NASA⌕ Search

SEARCH · Search NASA

Results for “X-ray synchrotron radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microstructural evolution and phase stability in Nb-containing interstitial Fe-Mn-Co-Cr-C high-entropy alloys: An in-situ synchrotron X-ray diffraction study during laser melting

The influence of Nb on phase stability and microstructural evolution in an interstitial Fe-Mn-Co-Cr-C high-entropy alloy was investigated using in-situ synchrotron X-ray diffraction (SXRD) during laser melting. Scheil-Gulliver simulations predict the formation of σ and γ-f.c.c. phases in all three alloys, along with NbC in Nb-containing compositions. SXRD confirmed the presence of most predicted phases, but the σ phase was absent. Nb promotes crystallite refinement and increases dislocation density, though excessive additions reduce refinement efficiency due to solubility limits and secondary phase formation. Furthermore, Nb addition also enhances ε-h.c.p. phase formation by reducing stacking fault energy through NbC-induced carbon depletion. Analysis of intensity peak evolution reveals that Nb alters preferred grain orientations, reducing {111} γ intensity while enhancing {220} γ , leading to a more isotropic grain distribution. Overall, Nb plays a key role in phase selection, microstructure refinement, and preferred orientation evolution, allowing the tailored microstructure of high-entropy alloys via rapid solidification.

Interstitial high entropy alloys↗
DOE OSTI2025

In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge

Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.

Crystallographic preferred orientation↗
DOE OSTI2026

Compression rate effects on the Bi-III stability field in dynamic diamond anvil cell XFEL studies of bismuth

This study aims to resolve conflicting observations of bismuth’s high-pressure phase transitions across static, intermediate, and shock compression regimes. We probed its high-pressure structural sequence using the dynamic diamond anvil cell with and time-resolved X-ray diffraction with microsecond resolution at an X-ray free-electron laser. At room temperature and pressures up to 20 gigapascals, bismuth evolves through the same structural sequence previously identified under static compression. However, the transformation behavior differs in important ways under dynamic loading. In particular, the transition from the incommensurate intermediate-pressure phase to the high symmetry high pressure phase begins at pressures about 2 to 4 gigapascals lower than in static experiments, and the onset of this transformation depends on the compression rate. As a result, the stability field of the intermediate-pressure phase is reduced under rapid compression. Our results suggest that at sufficiently fast loading rates the intermediate phase may be bypassed entirely, consistent with previous shock-compression observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Effect of pressure cycling and compression rate on the bcc-hcp transition in an FeNi alloy

Here, we investigate the body-centered cubic (bcc) to hexagonal close-packed (hcp) phase transition in Fe-10wt. %Ni alloy, combining pressure cycling and fast compression with time-resolved synchrotron x-ray diffraction in a dynamic diamond anvil cell. Three pressure cycles were conducted with compression rates ranging from 0.1 to nearly 10 3 GPa/s. During the first cycle with the slowest compression, the observed orientations in the bcc and hcp phases are consistent with the Burgers mechanism, followed by c-axis rotation of the hcp phase consistent with {$10$ $\bar{1}2$} twinning. During the following cycles with fast compression at 10 2 –10 3 GPa/s, the hcp phase exhibits negligible c-axis rotation with a nearly constant c/a ratio of ∼1.61 up to ∼30 GPa, indicating suppression of plastic deformation (especially, twinning) due to sample confinement from the gasket. Notably, the onset pressure of the transition decreases with additional pressure cycling and faster compression, which normally leads to over-pressurization. This suggests that defects or shear induced from the pressure cycling reduces the transition kinetics even during fast compression. These insights into the deformation and transition behavior in an FeNi alloy under multiple dynamic loading cycles can offer guidance for future design of advanced structural alloys and improve our understanding of planetary core processes.

FeNi alloy↗
DOE OSTI2025

Simultaneous hard x-ray Talbot phase and dark-field imaging in laser experiments at XFEL facilities

X-ray Free Electron Laser (XFEL) facilities offer unprecedented opportunities to advance instrumentation for studying matter under extreme conditions. In this study, we harnessed the enhanced x-ray capabilities of XFELs to demonstrate dark field imaging in laser-driven experiments at XFEL facilities. Utilizing a Talbot x-ray interferometer, we simultaneously captured transmission, dark-field, and differential phase contrast radiographs of laser-driven metallic foils. Our work showcases the feasibility of single-shot grating-based Talbot x-ray dark-field imaging in pump-probe experiments at XFEL facilities, opening doors to a wide range of hard x-ray imaging applications in material science and high-energy density physics.

Bouffetier, V. [Helmholtz-Zentrum Dresden-Rossendo↗
DOE OSTI2026

How Does Metal Spin State Affect Electronic Communication in Mixed-Valence Dimers? Insights from Ultrafast Near-Infrared and Soft X-ray Transient Absorption Spectroscopy

Recent advancements in photocatalysis, photovoltaics, and quantum information science take advantage of electron spin, and determining how spin multiplicity affects electron transfer is key to understanding these phenomena. Here, in this study, we examine how metal spin state affects electronic communication in an organometallic mixed-valence dimer, ferrocenyl cobaltocenium ([Fe II Cp 2 Co III Cp 2 ] + ). This complex can be photoexcited from its low-spin singlet Fe II ground state to form intermediate-spin triplet Fe II and high-spin quintet Fe II excited states. Using femtosecond optical transient absorption (OTA) spectroscopy with visible (vis), near-infrared (NIR), and short-wave IR (SWIR) probes, supported by time-dependent density functional theory (TD-DFT) calculations, we measure Fe II Co III →Fe III Co II intervalence charge transfer (IVCT) bands in each of the Fe II spin states. Mulliken–Hush analysis of the excited-state IVCT bands was used to compute the electronic coupling between the metal centers in all three spin states, which increased as quintet < triplet < singlet. Meanwhile, the peak energy of the bands, and thus the ΔG of the IVCT transition, increased as triplet < quintet < singlet. Then, to directly probe the electronic structure at each metal center, we employed picosecond soft X-ray transient absorption (XTA) spectroscopy at the Fe and Co L 3 edges. Our results show that the low-spin and high-spin states of [Fe II Cp 2 Co III Cp 2 ] + are valence-localized, while the intermediate-spin state is partially delocalized. The differences in charge delocalization are attributed to differences in orbital occupation and geometry that affect the free energy and superexchange coupling.

Burke, John H. [Univ. of Illinois at Urbana-Champa↗
DOE OSTI2026

Towards time-resolved MicroED grid preparation using mix-and-inject gas dynamic virtual nozzles

Recent progress in gas dynamic virtual nozzle (GDVN) technologies in combination with high-brilliance synchrotron and X-ray free-electron lasers (XFELs) has allowed the visualization of protein dynamics in crystallo by mixing macromolecular protein crystals with a substrate using tunable mixing times on the order of milliseconds to seconds prior to serial X-ray diffraction data collection. This has become the method of choice for high-resolution structure determination of intermediate states. However, such experiments require large counts of crystals of proper sizes for high-resolution data collection, and premium beam times for screening efforts. Cryogenic microcrystal electron diffraction (MicroED) represents a complementary technique that may be a more accessible avenue for time-resolved nanocrystallography compared with serial X-ray diffraction experiments. MicroED can produce full diffraction datasets from just a few submicrometre-thick crystals, and the approach is more readily accessible, requiring standard cryogenic transmission electron microscopy (TEM) equipment available at many universities and institutes. Cryogenic MicroED, like other forms of cryo-EM, begins with rapidly freezing biological material on electron microscopy grids. In the case of MicroED, micro- to nano-crystals (<500 nm thick) are deposited onto electron microscopy grids and plunge-frozen for subsequent electron diffraction data collection. Here, we have incorporated GDVN technology developed originally for XFEL experiments into the freezing process as a first step towards time-resolved studies. We describe the limited deposition efficiency of the model MicroED protein proteinase K on TEM grids using GDVNs, preceding sample vitrification and successful MicroED data collection. We discuss both the initial results from such experiments and the methodological challenges in developing this approach into a reliable workflow for millisecond-to-second time-resolved structural studies of macromolecules. Our results promise a strategy to deposit crystals on grids using GDVNs and determine high-resolution structures by MicroED, constituting a first step towards development of time-resolved MicroED experiments.

MicroED↗
DOE OSTI2026

Effect of Lithium Doping on MgO Hydroxylation and Carbonation

Recovery of magnesium from brines can potentially be used to source MgO (periclase) as a CO 2 sorbent or for Mg-based cements. However, it is not clear how common impurities in brines, such as lithium, affect the resulting MgO reactivity. Here, to test the effect of lithium incorporation on MgO reactivity for hydration and carbonation, we combined computational simulations with experiments. Experimentally altered (Mg,Li)O with a low dopant concentration (0.012 ± 0.002% w/w Li) was characterized using synchrotron-based X-ray scattering and high-resolution electron microscopy to measure reaction layer formation on (Mg,Li)O. Single-crystal X-ray diffraction analysis of (Mg,Li)O demonstrates that the incorporation of lithium leads to the formation of oxygen vacancies. The presence of vacancies is likely causing faster hydroxylation rates as predicted by ab initio molecular dynamics simulations. However, the faster hydroxylation rates likely lead to faster passivation of the surface because we observe thinner reaction layers on (Mg,Li)O samples both over short time periods (30 days) and over long time periods (28 years). After 28 years, the reaction layer on the (Mg,Li)O sample was less than one-third of the thickness of that of the pure MgO sample. In addition, over 30 days, reaction layers on (Mg,Li)O samples primarily formed at steps rather than on terraces, in contrast to our previous observations on MgO. Based on our results, naturally occurring impurities in MgO modify its reactivity even at very low concentrations and need to be considered for accurate reaction rate prediction for application of MgO as a CO 2 sorbent or in cements.

MgO↗
DOE OSTI2026

Phase Transitions of Eutectic High Entropy Alloy AlCoCrFeNi 2.1 Under Shock Compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. Dynamic compression experiments and molecular dynamics simulations are presented to study the structural evolution of AM EHEA AlCoCrFeNi 2.1 when compressed to pressures up to 400 GPa. In situ X-ray diffraction measurements capture the appearance of face-centered cubic and body-centered cubic phases at different pressure conditions, with pure- and mixed-phase regions. Furthermore, understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhancing nanoscale charged colloid crystallization near a metastable liquid binodal

Achieving predictive control over crystallization using non-classical nucleation while avoiding kinetic traps would be a step towards designing materials with new functionalities. We address these challenges by inducing the bottom-up assembly of nanocrystals into ordered arrays, or superlattices. Using electrostatics—rather than density—to tune the interactions between particles, we watch self-assembly proceed through a metastable liquid phase. Here, we systematically investigate the phase behaviour as a function of quench conditions in situ and in real time using small-angle X-ray scattering. By fitting to colloid, liquid and superlattice models, we extract the time evolution of each phase and the system phase diagram, which we find to be consistent with short-range attractive interactions. Using the predictive power of the phase diagram, we establish control of the self-assembly rate over three orders of magnitude, and we identify one- and two-step self-assembly regimes, with only the latter implicating the metastable liquid as an intermediate. The presence of the metastable liquid increases the superlattice formation rate relative to the equivalent one-step pathway, and the superlattice order increases with the rate, revealing a generalizable kinetic strategy for promoting and enhancing ordered assembly.

Tanner, Christian P. N. [University of California,↗
DOE OSTI2025

Supramolecular Support of Cuprophilic Network Bonding in 2-D Copper n -Alkanethiolates

Here, the development of heterogeneous materials, catalysts, and semiconductors is often reliant on precise control of self-assembly and crystal packing. Many new materials are initially synthesized as microcrystalline powders, making them incompatible with typical methods of structure determination, such as single-crystal X-ray diffraction. This resultant lack of structural information has made thorough investigation into the effect of metal substitution on crystal structure in metal-organic chalcogenolates (MOChas) challenging. Here, we use small molecule serial femtosecond crystallography (smSFX) to present the structures of four copper n-alkanethiolates: CuSC4, CuSC5, CuSC6, and CuSC7. Divergent patterns of alkyl chain packing are identified from microcrystalline powders via smSFX. An odd-even effect in crystal packing has been identified and attributed to different orientations of symmetry elements in the even- and odd-numbered chains. This results in minute changes in the azimuthal organization of the even-numbered chains and the network of cuprophilic interactions. Additionally, we present a synthesis of crystalline gold n-alkanethiolates to provide the first comparison between three d 10 coinage metals (Cu, Ag, and Au) and their resultant n-alkanethiolates.

Willson, Maggie C. [Univ. of Connecticut, Storrs, ↗
DOE OSTI2026

Spatiotemporal and Statistical Mapping of Transition Metal Equilibria in Alkaline Media

Transition metal dissolution and redeposition (D/R) kinetics in alkaline media play a critical role in various chemical and electrochemical processes. Competitive reaction kinetics between different transition metals can modulate individual metal behavior in these processes. To date, these phenomena have remained largely unmeasured, and even when captured, they are difficult to statistically characterize due to their dynamic nature, simultaneous occurrence, and spatially heterogeneous nature. Here, in this study, we develop a statistical analysis framework based on in situ and operando X-ray fluorescence microscopy (XFM) to investigate the relative D/R kinetics of multiple transition metals in alkaline media. By employing statistical analysis, we quantify the spatial distribution of D/R species and assess the rate at which the system reaches equilibrium under varying reaction conditions. We show that pH does not simply change the rate of dissolution and redeposition, but reorganizes the cross-element kinetic correlations among Ni, Fe, and Mn and accelerates the spatial equilibration of D/R events, as quantified through correlation analysis, reaction-rate estimation, probability function distributions, and texture-based monitoring statistics. Additionally, we demonstrate how modifying the solvent environment can influence D/R kinetics, providing a pathway for tuning materials synthesis and process optimization. Our study offers valuable insights into the complex interplay between different transition metals and provides a reliable statistical framework for spatial analysis of diverse imaging data sets, enabling deeper extraction of latent information across multiple modalities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of Orbital-Selective Dual Modulations in an Anisotropic Antiferromagnetic Kagome Metal TbTi 3 ⁢Bi 4

Orbital selectivity is pivotal in dictating the phase diagrams of multiorbital systems, with prominent examples including the orbital-selective Mott phase and superconductivity. The intercalation of anisotropic layers represents an effective method for enhancing orbital selectivity and thereby shaping the low-energy physics of multiorbital systems. Despite its potential, related experimental studies, especially those elucidating the correlation between orbital selectivity and magnetism, remain limited. In this work, we systematically examine the interplay between orbital selectivity and magnetism in the newly discovered anisotropic kagome TbTi 3 ⁢Bi 4 single crystal, and report the coexistence of orbital-selective dual-band modulations (𝑞 1 ∼ 1/3⁢𝑎*, 𝑞 2 ∼ 0.28⁢𝑏*) within the antiferromagnetic (AFM) state. By combining soft x-ray and vacuum ultraviolet angle-resolved photoemission spectroscopy measurements, neutron powder diffraction, scanning tunneling microscopy, and density-functional-theory calculations, we identify these dual-band reconstructions as manifestations of the AFM order driven by a (approximately 1/3, 0.28, 0) nesting instability of the intercalated Tb 5⁢𝑑 𝑥⁢𝑧 orbitals. These orbital-selective modulations induce unusual momentum-dependent band folding and lead to the emergence of Dirac cones only at the $\bar{M}$ 1 point, signaling a topological phase transition in the AFM state. Importantly, the discovery of orbital-selective (approximately 1/3, 0.28, 0) AFM order offers crucial insights into the mechanism underlying the fractional magnetization plateau in this kagome AFM metal. Our findings not only underscore the essential role of both conducting and localized electrons in determining the magnetic orders of Ln⁢Ti 3 ⁢Bi 4 (Ln = lanthanide) kagome metals but also offer a pathway for manipulating magnetism through selective control of anisotropic electronic structures.

Zhang, Renjie [Shanghai Jiao Tong University (Chin↗
DOE OSTI2026

Shock-induced phase transitions and stacking fault formation in additively manufactured eutectic high-entropy alloy Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2

Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 additively manufactured using laser powder bed fusion (LPBF) is among the toughest as-built alloys reported and is a promising candidate for use in extreme environments. However, its behavior under multi-megabar pressure regimes remains unexplored. We used femtosecond in situ X-ray diffraction to investigate the shock response of LPBF Ni40Co20Fe10Cr10Al18W2 under laser-driven shock compression and release. Our results reveal that the initial dual-phase face-centered + body-centered structure transforms to a single face-centered phase over a wide pressure range of 84±10 to 277±55 GPa, followed by a transition to a single body-centered phase at 431±48 GPa. We establish the Hugoniot equation-of-state of LPBF Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 and compare it to the benchmark alloy AlCoCrFeNi 2.1 , demonstrating the effects of W-doping and increased Al content. High stacking fault probabilities, close to those measured in Au and Ag, are observed upon compression. A portion of the stacking faults are annihilated upon release to ambient pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Metrology for femtosecond pulsed x-ray heating in diamond anvil cell experiments at the European XFEL: Revisiting the iron phase diagram up to 150 GPa

The development of pulsed intense x-ray sources, such as free electron laser, offers new avenues for high pressure experiments. Here, we study the feasibility and metrology of x-ray heating in diamond anvil cells at the European x-ray free electron laser. This method enables one to volumetrically heat the sample while inhibiting chemical migration and probing the crystallographic structure of the sample throughout the heating with a high repetition rate. We focus our study on iron, whose phase diagram is well established up to 100 GPa, to explore the possibilities and limitations of this technique. We volumetrically heat iron samples at starting pressures ranging from 10 to 138 GPa, using the x-ray beam pulsed at 4.5 MHz in a serial pump-and-probe experimental design. Experimental challenges arise from temperature gradients within the sample, changes in temperature at the 100 ns timescale, the difficulty of direct temperature estimates, the effect of thermal pressure, and the presence of metastable crystallites due to rapid cycles of heating and cooling. Hence, we develop a multi-crystal-like data processing method that allows us to account for sample heterogeneity in probed conditions. We then calibrate our measurements using known physical properties of iron under pressure. Thermal pressure in our experiments increases from 4% of the isochoric prediction at 10 GPa to 23% at 138 GPa, and we show that our data are in agreement with most previous observations of iron in this pressure range. The method can now be implemented at higher pressures and temperatures and on materials with unknown phase diagrams.

Materials science↗
DOE OSTI2025

Emergence of pseudoresonance in high-intensity resonant inelastic x-ray scattering

We report resonant inelastic x-ray scattering (RIXS) spectra of neon atoms interacting with intense x-ray pulses generated using an x-ray free-electron laser (XFEL). We find that an unexpected peak emerges near the 𝐾⁢𝛼 line of Ne, which does not coincide with any physical resonances of neon ions. We perform theoretical calculations based on a quantum-state-resolved rate-equation approach with x-ray-induced processes including possible resonant excitations. Our dynamics simulations demonstrate that a sequence of multiple resonant photoabsorption events are involved and the interplay of those multiple resonances in combination with the relatively large spectral bandwidth of XFEL radiation leads to the emergent resonance-like structure at a position where no resonances exist. Our finding offers critical guidance for future applications of high-intensity RIXS at XFEL facilities.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Quantifying the Impact of Metal Population Distribution in MFI-Supported Mo Catalysts for Methane Dehydroaromatization

Precise evaluation of intrinsic kinetic behavior in Mo/MFI catalysts for methane dehydroaromatization (MDA) is confounded by variations in Mo dispersion and speciation, which are influenced by metal loading and zeolite acidity. This work advances the utility of H 2 -temperature programmed reduction (H 2 -TPR) for characterizing Mo/MFI catalysts by enabling quantitative comparison of MoO x populations distinguished by reduction behavior and linked to initial catalytic performance. A comprehensive H 2 reduction pathway is established through systematic H 2 - TPR studies varying catalyst composition (1–10 wt % Mo, Si/Al = 15, 40, ∞), supplemented by UV-Raman spectroscopy, X-ray powder diffraction, N 2 physisorption, NH 3 -TPD, and advanced spectroscopic analysis (in situ XAS with principal component analysis/multivariate curve resolution—alternating least squares). Two low-temperature H 2 -TPR regions capture distinct Mo populations undergoing initial Mo(VI)→Mo(IV) reduction: a lower-temperature population (Mo-RI) associated primarily with highly dispersed, anchored MoO x species expected to predominantly reside within MFI channels, and a higher-temperature population (Mo-RII) corresponding to a broader set of MoO x species that becomes increasingly bulk-like/extrazeolitic at higher Mo loading. Quantification of these populations provides practical, kinetically relevant descriptors for comparing initial MDA rates across catalysts with varying Mo loading, Si/Al ratio, and MoO x heterogeneity. Application of lower-temperature Mo-RI estimates to kinetic measurements reveals a minimum threshold of ∼0.12 × 10 –3 mol Mo-RI/g cat , above which initial forward benzene rates normalized to this population converge despite differences in metal loading and zeolite Brønsted acidity. This threshold coincides with a transition toward a common C 2 -mediated benzene-forming regime, as indicated by approach-to-equilibrium analysis of methane-to-ethane, ethane-to-ethylene, and ethylene-to-benzene reaction steps. Above this threshold, normalized initial benzene rates are nearly invariant with increasing Mo-RII/Mo-RI population ratio, indicating that excess Mo-RII populations, including bulk-like/extrazeolitic MoO x domains present at higher loading, do not measurably suppress benzene formation associated with anchored and mostly channel-confined Mo population under the initial-rate conditions examined.

Mo/MFI↗
DOE OSTI2025

Unravelling electro-chemo-mechanical interplay in layered oxide cathode degradation in solid-state batteries

Solid-state batteries (SSBs) hold notable promise for advancing energy storage technologies. However, their commercial viability is limited by the poor cycle stability and complex degradation mechanism. This study underscores the pivotal role of electro-chemo-mechanical interactions in driving the failure of SSBs. Leveraging advanced x-ray imaging and spectroscopy techniques, we analyzed LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes from cycled Li x In||Li 6 PS 5 Cl (LPSC)||NMC811 SSBs, uncovering the interplay between microstructure, chemical heterogeneity, mechanical characteristics, and electrochemical performance. Our results show that revealing electro-chemo-mechanical interactions is essential to develop strategies to suppress the degradation of SSBs. Particularly, we revisit a LiNbO 3 (LNO) coating layer to mitigate electrochemical degradation. The LNO@NMC811 cathode retains 116 milliampere-hours per gram after 200 cycles, showing excellent stability, while the uncoated NMC811 cathode keeps degrading over time, with suppressed chemical heterogeneity and mechanical failure. This work highlights the importance of synergizing advanced material design with coating techniques, ensuring uniform lithium flux and improving mechanical properties to achieve stable, high-performance SSBs.

Zheng, Xueli [SLAC National Accelerator Laboratory↗