Search NASA⌕ Search

SEARCH · Search NASA

Results for “ZIRCONATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Regeneration mechanisms of high-lithium content zirconates as CO 2 capture sorbents: experimental measurements and theoretical investigations

By combining TGA and XRD measurements with theoretical calculations of the capture of CO 2 by lithium-rich zirconates (Li 8 ZrO 6 and Li 6 Zr 2 O 7 ), it has been demonstrated that the primary regeneration product during absorption/desorption cycling is in the form of Li 2 ZrO 3 . During absorption/desorption cycles, lithium-rich zirconates will be consumed and will not be regenerated. Here, this result indicates that among known lithium zirconates, Li 2 ZrO 3 is the best sorbent for CO 2 capture.

36 MATERIALS SCIENCE↗

Zircon Lu-Hf systematics: Evidence for the episodic development of Archaean greenstone belts

A combined U-Th-Pb and Lu-Hf isotopic study of zircons was undertaken in order to determine the provenance and age of an Archean granite-greenstone terrain and to test the detailed application of the Lu-Hf system in various Archean zircons. The eastern Wawa subprovince of the Superior province consists of the low grade Michipicoten and Gamitagama greenstone belts and the granitic terrain. The Hf isotopic data indicate that the typical lithological features of a greenstone belt cycle could be accommodated in a crustal growth model that involved decreasing depth of melting in three isotopically distinct reservoirs: mantle, lower crust and upper crust. The model age of the sources given by the intersection of the lower crustal curve with the bulk earth evolution curve is about 2900 My, in good agreement with the zircon U-Pb basement age. This linear array also has a similar intersection age to that of Proterozoic carbonatite complexes. The general convergence of the other reservoir vectors around this age suggests that mantle depletion, crustal extraction and intracrustal differentiation were all part of the same episodic event. It is also apparent that recycling of older basement was important in the formation of many of the later greenstone belt rocks.

Smith, P. E.↗

The early archaean crustal history of West Greenland as recorded by detrital zircons

The isotope systematics of some of the oldest samples on Earth from both Greenland and Australia was discussed. The antiquity was confirmed of the 4.1 to 4.2 Ga zircons from Western Australia; the model Lu-Hf age of these zircons, as measured with the ANU ion probe is 4.14 + or - 0.24 Ga, although the oldest preserved rock units there are anorthosites with a Lu-Hf model age of about 3.73 Ga. U-Pb ion probe ages of detrital zircons ranging between 2.87 and 3.89 Ga from an Akilia association quartzite was reported, whose age of deposition is probably around 3.8 Ga. It was argued that the younger age in this range are discordant because of late Pb-loss, probably associated with a high grade metamorphic event at about 3.6 Ga. It was also argued that the earliest crust in West Greenland and elsewhere is about 3.9 Ga, but in some places, such as Western Australia, crustal evolution took place much earlier, perhaps starting as far back as 4.3 Ga. This would account for the presence in that terrane of abundant K rich granitoid, the paucity of tonalitic and trondhjemitic materials, and the existence of Eu anomalies in early Archean sediments.

Kinny, P. D.↗

Implications for the evolution of continental crust from Hf isotope systematics of Archean detrital zircons

Results from the fractionation of zircon by sedimentary processes into continental margin sandstone yield information on the preservation of preexisting continental crust in the form of zircon, making it possible to distinguish between the contrasting theories of gradual growth versus constant volume of continental crust over geologic time. In this work, Hf-176/Hf-177 ratios were determined for detrital zircon fractions from 2.0-2.5, 2.6-3.0, and pre-3.0 Gyr old sandstones from the Canadian-Shield, the North-Atlantic, the Wyoming, and the Kaapvaal Cratons. Results pointed to small amounts of continental crust prior to 3.0 Gyr ago and a rapid addition of continental crust between 2.5 and 3.0 Gyr ago, consistent with the gradual growth of continental crust, and giving evidence against no-growth histories.

Stevenson, Ross K.↗

Rare earth element selenochemistry of immiscible liquids and zircon at Apollo 14 - An ion probe study of evolved rocks on the moon

Results are presented of trace-element analyses of three lunar zircons. The major-element and REE compositions were determined using electron microprobes, and a correction was made for zircon for Zr-Si-O molecular interferences in the La to Pr mass region. The three zircons were found to exhibit similar REE abundances and patterns. Results of the analyses confirm earlier studies (Hess et al., 1975; Watson, 1976; Neal and Taylor, 1989) on the partitioning behavior of trace elements in immiscible liquid-liquid pairs. The results also support the postulated importance of silicate liquid immiscibility in the differentiation of the upper mantle and crust of the moon.

Snyder, Gregory A.↗

U-Pb provenance ages of shocked zircons from the K-T boundary, Raton Basin, Colorado

U-Pb isotopic systematics from analyses of single zircons identify at least two provenance ages, approximately 575 Ma and approximately 330 Ma, for zircons from the impact layer of the K-T boundary, Raton Basin, Colorado. These data are a preliminary confirmation of results reported from the same layer. The zircon provenance ages provide a unique signature for identification of the source crater since igneous rocks of these ages (or sedimentary rocks derived from them) must characterize part of the impact stratigraphy.

Premo, W. R.↗

Impact-shocked zircons: Discovery of shock-induced textures reflecting increasing degrees of shock metamorphism

Textural effects specifically characteristic of shock metamorphism in zircons from impact environments have not been reported previously. However, planar deformation features (PDF) due to shock metamorphism are well documented in quartz and other mineral grains from these same environments. An etching technique was developed that allows scanning electron microscope (SEM) visualization of PDF and other probable shock-induced textural features, such as granular (polycrystalline) texture, in zircons from a variety of impact shock environments. These textural features in shocked zircons from K/T boundary distal ejecta form a series related to increasing degrees of shock that should correlate with proportionate resetting of the U-Pb isotopic system.

Bohor, B. F.↗

Complex Histories of Two Lunar Zircons as Evidenced by their Internal Structures and U-Pb Ages

The U-Pb dating of lunar zircon by ion-microprobe provides a robust technique for investigating the timing of lunar events [1,2]. However, we have now identified two cases where the U-Pb systems in a single zircon show more than one age. These complex zircons provide new opportunities for extending our knowledge on the timing of events in the early history of the Moon.

Pidgeon, R. T.↗

Petrology of Zircon-Bearing Diogenite Northwest Africa 10666

The howardite, eucrite, and diogenite (HED) meteorites are a group of achondrites thought to be derived from the asteroid 4 Vesta, though there is active debate as to whether all diogenites are part of the HED suite. Petrologic investigation of the HED meteorite group provides a means of understanding early planetary differentiation processes and early evolution of planets in our solar system. Diogenites are predominantly coarse grained ortho-pyroxenites with some samples containing appreciable amounts of clinopyroxene, olivine, chromite, and plagioclase. Accessory metal, troilite, and apatite are common. Many diogenites are brecciated, however, there are few poorly to unbrecciated samples. Diogenites are important because they may represent the lower crust of 4 Vesta. Although Mg isotope data indicates that the sources of diogenites are ancient, their crystallization ages are difficult to constrain due to their protracted thermal histories. The limited chronologic data for diogenites also limits the ability to test petrogenetic connections with eucrites and even parent body. A reliable and high closure-temperature isotope system, such as U-Pb in zircon, is needed to address the timing of diogenite igneous crystallization. Description of the textures and mineralogy of diogenites are essential to their classification and understanding their formation, in particular, whether all phases are petrogenetically related. Here, we present detailed petrographic data from a rare zircon-bearing feldspathic diogenite, Northwest Africa (NWA) 10666 and provide textural evidence for igneous crystallization of the zircon.

Tanner, T. B.↗

Constraining the Temperature of Impact Melt from the Mistastin Lake Impact Structure Using Zircon Crystal Structures

Impact melt is a product of hyper-velocity impact events formed by the instantaneous melting of near-surface target rocks. Constraining the temperature of impact melt is vital to understanding its prograde heating and cooling history, which can have implications for inferring the environment of early Earth ~4.0 billion years ago when microbial life potentially arose. To date, only one datum on the initial impact melt temperature has been derived by Timms et al. These authors studied zirconia microstructures and crystallographic orientations that revealed the former presence of cubic zirconia, found in a black impact glass at the Mistastin Lake impact structure, Canada. The presence of cubic zirconia indicates a minimum temperature for the impact melt of >2370°C from the dissociation temperature of zircon to cubic zirconia and liquid SiO2. With only one temperature datum, it is still difficult to constrain the entire temperature range experienced during the impact melting process; from its instantaneous formation to thermal equilibrium with the “cold” clasts collected along the crater floor and walls. In addition, obtaining a temperature value from only one type of impactite limits the inferred temperature range, because each impactite experiences a different cooling history. In this study, we present a preliminary investigation of 61 zircon crystals, 14 of which are similar to those studied by Timms et al., from the Mistastin Lake impact structure. To acquire a more accurate temperature profile representative of impact melt, zircon crystals were collected from different types of impactites containing impact melt, including additional samples of the black impact glass studied by Timms et al.

Tolometti, G. D.↗

Processing and properties of hafnium-doped tin-modified lead zirconate titanate 95/5 ceramics

Niobium (Nb)-doped lead-tin-zirconate-titanate (PSZT) ceramics near the lead-zirconate-titanate 95/5 orthorhombic AFE-rhombohedral FE morphotropic phase boundary (PSZT 13.5/81/5.5 -1.6Nb) were prepared with up to 10 mol.% of hafnium (Hf) substituted for zirconium. The ceramics were prepared by a traditional solid-state synthesis route and sintered to near full density at 1150°C for 6 h in sealed alumina crucibles with self-same material as the lead vapor source. All compositions were ~98% dense with no detectable secondary phases by X-ray diffraction. The grain size was ~3 μm for all compositions, consisting of equiaxed grains with intergranular porosity. The compositions exhibited remnant polarization values of ~32 μC/cm 2 . Depolarization by the hydrostatic pressure-induced FE-AFE phase transition occurred at 310 MPa for all compositions, resulting in a total depolarization output of 32.4 μC/cm 2 for the PSZT ceramics. Evaluation of the R3c-R3m and R3m-Pm $\bar{3}$ m phase transition temperatures by impedance spectroscopy showed temperatures on heating ranging from 86 to 92°C and 186 to 182°C, respectively, for increasing nominal Hf content. Thermal hysteresis of the phase transitions was also observed in the ceramics, with the transition temperature on cooling being 1–4°C lower. The study demonstrated that the PSZT ceramics are relatively insensitive to variations in Hf content in the range of 0 to 10 mol.%.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics simulations of ion-solid interactions in zirconate pyrochlores

In this paper, an ab initio molecular dynamics method is employed to study low energy recoil events in zirconate pyrochlores (A 2 Zr 2 O 7 , A = La, Nd and Sm). It shows that both cations and anions in Nd 2 Zr 2 O 7 and Sm 2 Zr 2 O 7 are generally more likely to be displaced than those in La 2 Zr 2 O 7 . The damage end states mainly consist of Frenkel pair defects, and the Frenkel pair formation energies in Nd 2 Zr 2 O 7 and Sm 2 Zr 2 O 7 are lower than those in La 2 Zr 2 O 7 . These results suggest that the order–disorder structural transition more easily occurs in Nd 2 Zr 2 O 7 and Sm 2 Zr 2 O 7 resulting in a defect-fluorite structure, which agrees well with experimental observations. Our calculations indicate that oxygen migration from 48f and 8b to 8a sites is dominant under low energy irradiation. A number of new defects, including four types of cation Frenkel pairs and six types of anion Frenkel pairs, are revealed by ab initio molecular dynamics simulations. The present findings may help to advance the fundamental understanding of the irradiation response behavior of zirconate pyrochlores.

36 MATERIALS SCIENCE↗

Dissociation behavior of protons incorporated in yttrium doped barium zirconate

The dissociation behavior of protons incorporated in yttrium-doped barium zirconate (BZY20) was investigated via combination of in-situ diffuse reflectance Fourier transform infrared spectroscopy (FT-IR) and evolved gas analysis. The vicinities of dopant or host ions were considered as sites of proton dissolution. The temperature dependence of the dissociation of protons from each site was evaluated. Protons which were considered to have dissolved in the vicinity of dopant ions were easily removed and dissociated as water. On the other hand, those which dissolved in the vicinity of host ions were dissociated as hydrogen at high temperatures. Such dissociation behavior was also detected after using D{sub 2}O saturated gas for pre-treatment. These results suggest that some protons which dissolved in the perovskite oxide could dissociate as hydrogen without forming oxygen vacancies. (131words) - Graphical abstract: Different dissociation reactions of protons from yttria doped barium zirconate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of ZrN–sialon composites from zircon and alumina by carbothermal reduction–nitridation

Highlights: ► ZrN–sialon composites were directly synthesized from zircon and γ-Al{sub 2}O{sub 3}. ► The morphologies and phase compositions of products changed with the temperature. ► The comprehensive and systematic thermodynamic relation of the reaction process was analyzed comprehensively. ► This new technique for synthesizing ZrN–sialon composites can reduce the cost and energy consumption. -- Abstract: ZrN–sialon composites were synthesized from zircon and γ-Al{sub 2}O{sub 3} via carbothermal reduction–nitridation. The effects of reaction temperature on the phase compositions and product morphologies were studied. The equilibrium relationship curves of the condensed phases were drawn and the temperature dependence of the phase stability was investigated. The results show that products with different phase compositions and morphologies can be obtained at different temperatures. The optimum temperature for acquiring ZrN–sialon composites was 1550 °C. Granular ZrN and short prismatic β-sialon (Si{sub 3}Al{sub 3}O{sub 3}N{sub 5}) were formed at 1500 °C, accompanied by surplus Al{sub 2}O{sub 3} and ZrO{sub 2}. The dominant products at 1550 °C were ZrN and Si{sub 3}Al{sub 3}O{sub 3}N{sub 5}, whereas they were ZrN and 15R-SiAl{sub 4}O{sub 2}N{sub 4} at 1600 °C. β-sialon had perfect crystals with a long-column morphology, whereas 15R-SiAl{sub 4}O{sub 2}N was plate-like.

36 MATERIALS SCIENCE↗

Unified Interatomic Potential for Zircon, Zirconia and Silica Systems

We report the development of a unified force field with high transferability and reliability to model both structures and mechanical properties of ZrSiO4, ZrO2 and SiO2 based on the success of the BKS potential for SiO2.1 The thermal expansion, relative stability and phase transition properties are consistent with experimental data and DFT calculations. The zircon to reidite transition pressure is 6.7 GPa. Amorphization of zircon results in volume expansion of 11% and decrease in the bulk modulus of 60%. Si polymerization and Zr under-coordination were observed in amorphous ZrSiO4 and in the damage produced by a 10 keV Zr recoil in crystalline ZrSiO4.

36 MATERIALS SCIENCE↗

Durable aluminate toughened zirconate composite thermal barrier coating (TBC) materials for high temperature operation

Research on advanced thermal barrier coating (TBC) materials capable of operating beyond 1200°C has primarily focused on the rare earth zirconate pyrochlores, particularly gadolinium zirconate (Gd 2 Zr 2 O 7 – GZO). The drawback of this material is a significant reduction in durability due to a low fracture toughness. This study investigates utilization of a thermodynamically compatible gadolinia alumina perovskite (GdAlO 3 – GAP) toughening phase to improve the durability of GZO. Dense pellets were fabricated to assess the material properties with minimal microstructural influence. Thermal stability, elastic modulus, hardness, indentation fracture resistance and erosion durability were evaluated for GZO, GAP, and composite pellets containing 10, 30, and 50 wt.% GAP. It was demonstrated that GAP and GZO are thermodynamically compatible through 1600°C and thus capable of operating well beyond the limits of traditional 7 wt.% yttria stabilized zirconia (YSZ). Grain sizes are maintained due to a lack of diffusion, and thus microstructural stability is enhanced. The GAP fracture toughness was shown to be over 2X that of GZO while exhibiting a lower elastic modulus and similar hardness. The 50:50 GZO-GAP composite exhibited a 63% reduction in the absolute erosion rate, demonstrating the immense toughening capabilities of this system. The implications for composite TBCs utilizing this system are discussed, along with future research.

36 MATERIALS SCIENCE↗

Ion beam irradiation of ABO4 compounds with the fergusonite, monazite, scheelite, and zircon structures

The effects of irradiation on CaWO4, SrWO4, BaWO4, YVO4, LaVO4, YNbO4, and LaNbO4 were investigated on thin crystals using 1.0 MeV Kr ions at 50-1000 K. All of the ABO4 compounds can be amorphized with calculated damage cross sections (σa = 1/Fc0) in the range of ~0.30-1.09 × 10-14 cm2 ion-1 at zero Kelvin. The analysis of fluence-temperature data returned critical temperatures for amorphization (Tc) of 311 ± 1, 358 ± 90, 325 ± 19, 415 ± 17, 541 ± 6, 636 ± 26, and 1012 ± 1 K, respectively, for the compounds listed above. Compared with previous in situ irradiation of ABO4 orthophosphate samples using 0.8 MeV Kr ions, the Tc values of LaVO4 and YVO4 are higher than those of LaPO4 and YPO4 by 82 K and 124 K, respectively. The Tc values of the three scheelite structures, CaWO4, SrWO4, and BaWO4, indicate that they are the most radiation tolerant compounds under these conditions. The A-B cation anti-site energies, EfAB, determined by DFT range from 2.48 to 10.58 eV and are highly correlated with the A-B cation ionic radius ratio, rA/rB, but are not correlated with Tc across the different structure types, suggesting that the formation and migration energies of Frenkel defects play a more important role in damage recovery in these compounds. We also discuss the role of cation and anion charge/iconicity as determined by DFT. ABO4 compounds with the zircon structure and B = P or V have a distinct advantage over those with B = Si as the damaged regions do not appear to be significantly affected by polymerization of (PO4) 3- or (VO4) 3- groups which might stabilize the amorphous fraction and ultimately lead to phase separation as observed in zircon (ZrSiO4).

amorphization↗

Chemical durability and surface alteration of lanthanide zirconates (A 2 Zr 2 O 7 : A = La-Yb)

Chemical durability of lanthanide zirconates (A 2 Zr 2 O 7 ) (A = La-Yb) under near-field environments is important for evaluating their application as potential nuclear waste forms. In this work, A 2 Zr 2 O 7 (A = La-Yb) are synthesized by spark plasma sintering with controlled microstructure and their chemical durability are evaluated in a nitric acid solution (pH = 1). Scanning transmission electron microscopy analysis reveals an amorphous passivation film either enriched with Zr or lanthanide. The complex chemistry of the passivation films can be correlated with a transition in corrosion mechanisms from a preferential release of lanthanide in La 2 Zr 2 O 7 to a preferential release of Zr in Er 2 Zr 2 O 7 and Yb 2 Zr 2 O 7 . These results suggest a dominant mechanism of incongruent dissolution and surface reorganization for the formation of passivation films. Strong correlations are identified between the leaching rates and cation ionic size, ionic potential, electronegativity differences between A-site cation and Zr, and bonding valence sum of oxygen, suggesting important impacts of structural and bonding characteristics in controlling chemical durability of lanthanide zirconates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗