Search NASA⌕ Search

SEARCH · Search NASA

Results for “analytics use cases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

NASTRAN analysis of a wheel-rail loading on its foundation

One type of azimuth bearing for a large ground antenna (100 m) will consist of steel wheels, mounted at four corners of the alidade, rolling on a circular flat rail which provides the vertical restraints; a radial constraining bearing at the center of the alidade provides the horizontal restraints. One important design feature is the compressive stresses in the grout or concrete foundation under the wheel-rail load. A finite element analysis check was made of a particular design that consists of a steel rail resting on a concrete foundation. Symmetry was assumed as much as possible in order to minimize the models, but meaningful element sizes were used. Recently developed isoparametric hexahedron elements available in the NASTRAN computing program, which minimizes the number of elements required while maintaining the accuracy of the computed stresses, were used with two versions of NASTRAN. Test cases to check with the analytical solutions were made. A side loading was also applied to calculate the increase in the concrete stresses.

Katow, M. S.↗
NASA NTRS1934

Experimental verification of Theodorsen's theoretical jet-boundary correction factors

Prandtl's suggested use of a doubly infinite arrangement of airfoil images in the theoretical determination of wind-tunnel jet-boundary corrections was first adapted by Glauert to the case of closed rectangular jets. More recently, Theodorsen, using the same image arrangement but a different analytical treatment, has extended this work to include not only closed but also partly closed and open tunnels. This report presents the results of wind-tunnel tests conducted at the Georgia School of Technology for the purpose of verifying the five cases analyzed by Theodorsen. The tests were conducted in a square tunnel and the results constitute a satisfactory verification of his general method of analysis. During the preparation of the data two minor errors were discovered in the theory and these have been rectified.

Schliestett, George Van↗
NASA NTRS2014

Modeling Sound Propagation Through Non-Axisymmetric Jets

A method for computing the far-field adjoint Green's function of the generalized acoustic analogy equations under a locally parallel mean flow approximation is presented. The method is based on expanding the mean-flow-dependent coefficients in the governing equation and the scalar Green's function in truncated Fourier series in the azimuthal direction and a finite difference approximation in the radial direction in circular cylindrical coordinates. The combined spectral/finite difference method yields a highly banded system of algebraic equations that can be efficiently solved using a standard sparse system solver. The method is applied to test cases, with mean flow specified by analytical functions, corresponding to two noise reduction concepts of current interest: the offset jet and the fluid shield. Sample results for the Green's function are given for these two test cases and recommendations made as to the use of the method as part of a RANS-based jet noise prediction code.

Leib, Stewart J.↗
NASA NTRS1975

JANNAF Rocket Engine Performance Test Data Acquisition and Interpretation Manual

Procedures recommended by the JANNAF Performance Standardization Working Group for acquisition and Interpretation of performance test data are presented. Included with the description of these procedures are recommended procedures covering the required measurements, associated instrumentation, calibration methods, and data uncertainties. In addition, criteria for the applicability of existing test data, the selection of test models, and analytical performance prediction improvement based on test results are outlined. Three sample cases using the recommended procedures are presented as an addendum under separate cover. Author

Evans, S. A.↗
NASA NTRS1978

The recalculation of the original pulse produced by a partial discharge

The loads on a dielectric or an insulation arrangement cannot be precisely rated without properly assessing the manner in which a pulse produced by a partial discharge is transmitted from the point of the event to the point where it is recorded. A number of analytical and graphic methods are presented, and computer simulations are used for specific cases of a few measurement circuits. It turns out to be possible to determine the effect of each circuit element and thus make some valid corrections.

Tanasescu, F.↗
NASA NTRS1990

Shape optimization for maximum stability and dynamic stiffness

Any optimization of structures for maximum stability or for maximum dynamic stiffness deals with an eigenvalue problem. The goal of this optimization is to raise the lowest eigenvalue (or eigenvalues) of the problem to its highest (optimal) level at a constant volume of the structure. Likely the lowest eigenvalue may be either inherently multi-modal or it can become multi-modal as a result of the optimization process. The multimodeness introduces some ambiguity to the eigenvalue problem and make the optimization difficult to handle. Thus far, only the simplest cases of multi-modal structures have been effectively optimized using rather elaborate analytical methods. Numerous publications report design of a minimum volume structure with different eigenvalues constraints, in which, however, the modality of the problem is assumed a priori. The method presented here utilizes a multi-modal optimality criteria and allows for inclusion of an arbitrary number of buckling or vibrations modes which might influence the optimization process. The real multi-modality of the problem, that is the number of modes participating in the final optimal design is determined iteratively. Because of a natural use of the FEM technique the method is easy to program and might be helpful in design of large flexible space structures.

Szyszkowski, W.↗
NASA NTRS2013

Analytical Algorithms to Quantify the Uncertainty in Remaining Useful Life Prediction

This paper investigates the use of analytical algorithms to quantify the uncertainty in the remaining useful life (RUL) estimate of components used in aerospace applications. The prediction of RUL is affected by several sources of uncertainty and it is important to systematically quantify their combined effect by computing the uncertainty in the RUL prediction in order to aid risk assessment, risk mitigation, and decisionmaking. While sampling-based algorithms have been conventionally used for quantifying the uncertainty in RUL, analytical algorithms are computationally cheaper and sometimes, are better suited for online decision-making. While exact analytical algorithms are available only for certain special cases (for e.g., linear models with Gaussian variables), effective approximations can be made using the the first-order second moment method (FOSM), the first-order reliability method (FORM), and the inverse first-order reliability method (Inverse FORM). These methods can be used not only to calculate the entire probability distribution of RUL but also to obtain probability bounds on RUL. This paper explains these three methods in detail and illustrates them using the state-space model of a lithium-ion battery.

Sankararaman, Shankar↗
NASA NTRS2022

Solar Temperature Variations Computed from SORCE SIM Irradiances Observed During 2003-2020

NASA’s Solar Radiation and Climate Experiment (SORCE) Spectral Irradiance Monitor (SIM) instrument produced about 17 years of daily average Spectral Solar Irradiance ( SSI ) data for wavelengths 240 nm – 2416 nm. We choose a day of minimal solar activity, 2008-08-24, during the 2008 − 2009 minimum between cycles 23 and 24, and compute the brightness temperature (𝑇 o ) from that day’s solar spectral irradiance (𝑆𝑆𝐼 o ). We consider small variations of T and SSI about these reference values, and derive linear and quadratic analytic approximations by Taylor expansion about the reference day values. To determine approximation accuracy, we compare to exact brightness temperatures T computed from the Planck spectrum, by solving analytically for T , or equivalent root-finding in Wolfram Mathematica. We find that the linear analytic approximation overestimates, while the quadratic underestimates the exact result. This motivates search for statistical “fit” models “in between” the two analytic models, with minimum root-mean-square-error RMSE. We make this search using open-source statistical R software, determine coefficients for linear and quadratic fit models, and compare statistical with analytic RMSE’s. When only linear analytic and fit models are compared, the fit model is superior at ultraviolet, visible, and near infrared wavelengths. This again holds true when comparing only quadratic models. Quadratic is superior to linear for both analytic and statistical models, and statistical fits give smallest RMSE’s. Lastly, we use linear analytic and fit models to find an interpolating function in wavelength, useful in case the SIM results need adjustment to another choices of wavelengths, to compare or extend to any other instrument.

SORCE↗
NASA NTRS2023

Study of Pairwise Deconfliction Metrics to Analyze Air Traffic Complexity in Upper Class E Airspace

Upper Class E Traffic Management (ETM) is envisioned to cooperatively facilitate operations of a diverse set of aerial vehicles, such as high-altitude long-endurance fixed-wing unmanned aircraft (low-speed and high-speed), high-altitude platforms, airships, stratospheric balloons, supersonic unmanned and commercial aircraft, etc., with a wide variety of mission types, performance characteristics, communication, navigation and surveillance capabilities, maneuverability, and on-board avionics in the National Airspace System (NAS) ’above’ 60,000 feet above mean sea level, without an active and direct control from human air traffic controllers. A diverse mixture of aerial vehicle types creates significant challenges in understanding air traffic complexity, which may not correlate strongly with air traffic density. One key step for determining air traffic complexity in upper class E airspace is to first understand pairwise deconfliction metrics such as reachability, reserve area, and reserve flight time for each pair of unique aerial vehicle types under potential conflict. Therefore, pairwise deconfliction metrics are first defined, and analytical equations are derived for conflict resolution using the heading change maneuver. Next, case studies are performed to analyze deconfliction metrics to avoid secondary conflicts in upper class E airspace. The study shows that pairwise deconfliction metrics are functions of maneuverability, performance characteristics, uncertainty in position and velocity, heading angle change, and conflict angle of aerial vehicles. The next step for this research is to build a mathematical model for air traffic complexity using pairwise deconfliction metrics and validate it in an upper Class E simulation environment.

Airspace Complexity↗
NASA NTRSDate not supplied

Study of Pairwise Deconfliction Metrics to Analyze Air Traffic Complexity in Upper Class E Airspace

Upper Class E Traffic Management (ETM) is envisioned to cooperatively facilitate operations of a diverse set of aerial vehicles, such as high-altitude long-endurance fixed-wing unmanned aircraft (low-speed and high-speed), high-altitude platforms, airships, stratospheric balloons, supersonic unmanned and commercial aircraft, etc., with a wide variety of mission types, performance characteristics, communication, navigation and surveillance capabilities, maneuverability, and on-board avionics in the National Airspace System (NAS) ’above’ 60,000 feet above mean sea level, without an active and direct control from human air traffic controllers. A diverse mixture of aerial vehicle types creates significant challenges in understanding air traffic complexity, which may not correlate strongly with air traffic density. One key step for determining air traffic complexity in upper class E airspace is to first understand pairwise deconfliction metrics such as reachability, reserve area, and reserve flight time for each pair of unique aerial vehicle types under potential conflict. Therefore, pairwise deconfliction metrics are first defined, and analytical equations are derived for conflict resolution using the heading change maneuver. Next, case studies are performed to analyze deconfliction metrics to avoid secondary conflicts in upper class E airspace. The study shows that pairwise deconfliction metrics are functions of maneuverability, performance characteristics, uncertainty in position and velocity, heading angle change, and conflict angle of aerial vehicles. The next step for this research is to build a mathematical model for air traffic complexity using pairwise deconfliction metrics and validate it in an upper Class E simulation environment.

Airspace Complexity↗
NASA NTRS2010

Modeling of Failure for Analysis of Triaxial Braided Carbon Fiber Composites

In the development of advanced aircraft-engine fan cases and containment systems, composite materials are beginning to be used due to their low weight and high strength. The design of these structures must include the capability of withstanding impact loads from a released fan blade. Relatively complex triaxially braided fiber architectures have been found to yield the best performance for the fan cases. To properly work with and design these structures, robust analytical tools are required that can be used in the design process. A new analytical approach models triaxially braided carbon fiber composite materials within the environment of a transient dynamic finite-element code, specifically the commercially available transient dynamic finite-element code LS-DYNA. The geometry of the braided composites is approximated by a series of parallel laminated composites. The composite is modeled by using shell finite elements. The material property data are computed by examining test data from static tests on braided composites, where optical strain measurement techniques are used to examine the local strain variations within the material. These local strain data from the braided composite tests are used along with a judicious application of composite micromechanics- based methods to compute the stiffness properties of an equivalent unidirectional laminated composite required for the shell elements. The local strain data from the braided composite tests are also applied to back out strength and failure properties of the equivalent unidirectional composite. The properties utilized are geared towards the application of a continuum damage mechanics-based composite constitutive model available within LS-DYNA. The developed model can be applied to conduct impact simulations of structures composed of triaxially braided composites. The advantage of this technology is that it facilitates the analysis of the deformation and damage response of a triaxially braided polymer matrix composite within the environment of a transient dynamic finite-element code such as LS-DYNA in a manner which accounts for the local physical mechanisms but is still computationally efficient. This methodology is tightly coupled to experimental tests on the braided composite, which ensures that the material properties have physical significance. Aerospace or automotive companies interested in using triaxially braided composites in their structures, particularly for impact or crash applications, would find the technology useful. By the development of improved design tools, the amount of very expensive impact testing that will need to be performed can be significantly reduced.

Goldberg, Robert K.↗
NASA NTRS1988

Transfer impedance measurements of the space shuttle Solid Rocket Motor (SRM) joints, wire meshes and a carbon graphite motor case

Using three different current injection methods and a simple voltage probe, transfer impedances for Solid Rocket Motor (SRM) joints, wire meshes, aluminum foil, Thorstrand and a graphite composite motor case were measured. In all cases, the surface current distribution for the particular current injection device was calculated analytically or by finite difference methods. The results of these calculations were used to generate a geometric factor which was the ratio of total injected current to surface current density. The results were validated in several ways. For wire mesh measurements, results showed good agreement with calculated results for a 14 by 18 Al screen. SRM joint impedances were independently verified. The filiment wound case measurement results were validated only to the extent that their curve shape agrees with the expected form of transfer impedance for a homogeneous slab excited by a plane wave source.

Papazian, Peter B.↗
NASA NTRS1976

Structural analyses for the modification and verification of the Viking aeroshell

The Viking aeroshell is an extremely lightweight flexible shell structure that has undergone thorough buckling analyses in the course of its development. The analytical tools and modeling technique required to reveal the structural behavior are presented. Significant results are given which illustrate the complex failure modes not usually observed in simple models and analyses. Both shell-of-revolution analysis for the pressure loads and thermal loads during entry and a general shell analysis for concentrated tank loads during launch were used. In many cases fixes or alterations to the structure were required, and the role of the analytical results in determining these modifications is indicated.

Stephens, W. B.↗
NASA NTRS1997

High Accuracy Evaluation of the Finite Fourier Transform Using Sampled Data

Many system identification and signal processing procedures can be done advantageously in the frequency domain. A required preliminary step for this approach is the transformation of sampled time domain data into the frequency domain. The analytical tool used for this transformation is the finite Fourier transform. Inaccuracy in the transformation can degrade system identification and signal processing results. This work presents a method for evaluating the finite Fourier transform using cubic interpolation of sampled time domain data for high accuracy, and the chirp Zeta-transform for arbitrary frequency resolution. The accuracy of the technique is demonstrated in example cases where the transformation can be evaluated analytically. Arbitrary frequency resolution is shown to be important for capturing details of the data in the frequency domain. The technique is demonstrated using flight test data from a longitudinal maneuver of the F-18 High Alpha Research Vehicle.

Morelli, Eugene A.↗
NASA NTRS1975

Spacecraft detumbling using movable telescoping appendages

The dynamics of detumbling a randomly spinning spacecraft using externally mounted, movable telescoping appendages were studied both analytically and numerically. Two types of telescoping appendages are considered: where an end mass is mounted at the end of an (assumed) massless boom; and where the appendage is assumed to consist of a uniformly distributed homogeneous mass throughout its length. From an application of Liapunov's second method, boom extension maneuvers were determined to approach either of two desired final states: close to a zero inertial angular velocity state, and a final spin rate about only one of the principal axes. Recovery dynamics are evaluated analytically for the case of symmetrical deployment. Numerical examination of other asymmetrical cases verifies the practicality of using movable appendages to recover a randomly tumbling spacecraft.

Bainum, P. M.↗
DOE OSTI2026

Impedance Based Fixture Neutralization (FINE) Method to Replicate Field Environments in Laboratory Settings

Test article vibration test responses will vary from one test laboratory to another due to differences in shaker and fixture dynamic characteristics. This is also seen between the field and laboratory due to the differing dynamic characteristics between field assembly loading and boundary conditions compared to the laboratory configuration. This work introduces a technique called Impedance Fixture Neutralization which customizes input forces to cause consistent responses for the Device Under Test across different vibration testing conditions. The customized force neutralizes the dynamic variations between configurations for the Device Under Test. The device responses can be replicated in several situations: when using a different fixture with the same attachment points, when the test article mounting location on the fixture changes, when the force location changes, or any combination of these situations. Impedance Fixture Neutralization uses the uncoupled dynamic characteristics of the test article and excitation fixtures to customize the input thereby causing the same test article responses between two mounting configurations (either field to laboratory or two different laboratory configurations). The application of the technique is shown using an analytical model of a two-beam system and analytically using experimental FRFs from plate and frame component hardware characterization tests. In both cases a device under test is attached to two test fixtures wherein the dynamic differences in the configurations are neutralized.

Laboratory↗
DOE OSTI2025

Web-based wide-area monitoring platform for ringdown and clustering analytics in power systems

This paper introduces an open-source research platform for monitoring the Mexican interconnected power grid, allowing real-time processing and information extraction of the grid’s dynamic condition. Moreover, the platform is a Python-based development that embeds different ringdown and clustering analytics tools. In the case of ringdown analysis, the modal information can be extracted using some of the most known algorithms, i.e., Prony analysis, eigensystem realization algorithm (ERA), and matrix pencil (MP). For clustering analysis, the coherent behaviour of generator and non-generator buses is provided by applying recent state-of-the-art techniques such as affinity propagation, K-means, hierarchical agglomerative clustering, and typicality data analysis. The results of up to 93 PMUs show that this open-source platform suits researchers’ and engineers’ power system dynamic analysis requirements.

Clustering↗
DOE OSTI2025

Photon counting with intensified charge coupled device (ICCD) – II. Laser induced breakdown spectroscopy (LIBS) spectral measurement

This study explores the application of photon counting (PC) to enhance the resolution of spectra acquired by an intensified charge-coupled device (ICCD) detector, with a focus on analytical atomic emission spectrometry using laser-induced breakdown spectroscopy (LIBS) as a use-case example. It demonstrates that, for spectra obtained with the same spectrometer–ICCD system, PC provides higher spectral resolution compared to conventional analog detector readout. This enhancement is particularly evident in the line wings of spectral peaks, facilitating better discrimination of isotopic peaks in the measured spectra. Although PC does not improve the resolution of an optical spectrometer directly, it rectifies the resolution lost caused by signal spreading in conventional ICCD analog measurement. However, similar to other counting techniques, excessive photons compromise detector linearity due to signal pileup. A correction model is proposed to mitigate the pileup effect, resulting in improved linearity and dynamic range in PC measurements. Additionally, the study reveals unexpected periodic structures in the flatfield image of the ICCD, which cause non-uniform detector gain in conventional analog as well as PC measurement modes and must be addressed for high-precision measurements.

47 OTHER INSTRUMENTATION↗