Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous separations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Radiochronometric analysis of an historic Cs-137 activity standard

In this work, a 137 Cs activity standard discovered during routine inventory was analyzed to determine its model age using radiochronometry. The aqueous activity standard was separated using an established separation method that employs commercially available Sr resin. The method was also tested against a nuclear forensics reference material developed specifically for benchmarking 137 Cs radiochronometry methods. Results of the analyses showed good agreement between the results and the certified values of the reference material. Analysis of the discovered activity standard were also in good agreement with the activity certification date, though uncertainty was higher due to natural Ba contaminating the sample and the stable 133 Cs used as a carrier during the standard’s production.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Colloidal metal transport in soils developing on historic coal mine spoil

Chemical weathering of pyrite via oxidative dissolution is well-known for generating Fe(III)-bearing colloids at acid mine drainage (AMD) sites; however, the potential for physical weathering of pyrite-bearing materials and subsequent release and transport of colloidal pyrite and associated trace metals has not been studied. Here, we monitored the colloidal metal transport in soil developing on abandoned coal mine spoil with a history of AMD generation to systematically study the contribution of colloids to base and trace metal transport and determine the elemental and mineralogical composition of colloids. Additionally, we collected soil pore water using lysimeters with a pore size of approximately 1.3 μm and centrifugation was used to separate the colloids from aqueous fractions. Metal concentrations of Na, Ca, Mg, K, Si, Al, Mn, Fe, Cu, and Zn were analyzed. Our results show only 14% of the total Al and Cu were present in colloidal fractions whereas 23%, 43%, and 54% of Fe, Mn, and Zn were transported in the colloidal phase, respectively. In contrast, all base metals were primarily present in the aqueous concentration with a small fraction (<10%) present in the colloidal phase. The colloidal fractions of the base metals were inferred to be associated with the concentration of clay colloids. The release of colloids exhibited possible sensitivity toward weather conditions such as alternating high temperatures and rainfall during summer (May–July) compared to fall (August–November). The morphology, elemental, and mineral composition of colloids were determined by a scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). Colloids were dominated by phyllosilicates (biotite, muscovite, and kaolinite) with minor quartz and feldspars. Other minerals phases identified in colloidal fractions were hematite, goethite, arsenopyrite, and chalcopyrite. Colloids consisting of Fe, S, and O with structures resembling framboidal pyrite were identified, which is consistent with the non-silicates minerals identified by XRD. Our study suggests that the physical weathering of pyrite in the mine spoil can generate colloidal pyrite, which is mobilized and transported by soil pore water. Our results also indicate that these pyritic colloids are associated with toxic trace metals including Cu, Mn, and Zn. Colloid mobilization is also impacted by changes in temperature and precipitation, where clay mobilization afer rain events is favored. Further, sudden spikes in aqueous and/or colloidal concentrations may be the result of local heterogeneity within soils developing on mine spoil, indicating that further field-based work is necessary to better characterize pore-scale processes that control aqueous and colloid transport at similar sites to have a better understanding of potential contaminant transport from mine spoil systems.

58 GEOSCIENCES↗
DOE OSTI2020

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures

Metal–organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. Furthermore, this review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Iminoguanidines: from anion recognition and separation to carbon capture

Iminoguanidines, first reported in 1898, have received renewed attention in the last 5 years due to their ability to recognize and separate anions from competitive aqueous environments. Iminoguanidines display high recognition abilities towards hydrophilic oxyanions (e.g., sulfate, chromate, carbonate) through strong and complementary hydrogen bonding from the guanidinium groups. Here, this feature article reviews the fundamental anion recognition chemistry of iminoguanidines, as well as real-world applications including sulfate removal from seawater and CO 2 capture for climate change mitigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In situ potassium and hydrogen ion exchange into a cubic zirconium silicate microporous material

The selective separation of ions from aqueous systems, and even in the human body, is a crucial to overall environmental management and health. Nanoporous materials are widely known for their selective removal of cations from aqueous media, and therefore have been targeted for use as a pharmaceutical to treat hyperkalemia. This study investigated the detailed crystallographic molecular mechanisms that control the potassium ion selectivity in the nanoporous cubic zirconium silicate (CZS) related materials. Using time-resolved in situ Raman spectroscopy and time-resolved in situ X-ray diffraction, the selectivity mechanisms were determined to involve a synchronous cation-cation repulsion process that serves to open a favorable coordination bonding environment for potassium, not unlike the ion selectivity filter process found in potassium ion channels in proteins. Enhancement of ion exchange was observed when the CZS material was in a partial protonated state (≈3:1 Na:H), causing an expansion of the unit-cell volume, enlargement of the 7 member-ring window, and distortion of framework polyhedra, which allowed increased accessibility to the cage structures and resulted in rapid irreversible potassium ion exchange.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1979

Forming "dynamic" membranes on stainless steel

"Dynamic" zirconium polyacrylic membrane is formed directly on stainless steel substrate without excessive corrosion of steel. Membrane is potentially useful in removal of contaminated chemicals from solution through reversed osmosis. Application includes use in filtration and desalination equipment, and in textile industry for separation of dyes from aqueous solvents.

Brandon, C. A.↗
NASA NTRS1981

Silicon by sodium reduction of silicon tetrafluoride

High purity silicon can be prepared from the reaction of Na with SiF4 to form Si and NaF. The SiF4 is obtained from inexpensive H2SiF6 by precipitation and decomposition of Na2SiF6. Concentrations of B and P are each in the 0.1 ppm wt range in the product Si, separated from NaF by aqueous leaching.

Sanjurjo, A.↗
NASA NTRS1981

Development of battery separator composites

Improved inorganic-organic separators developed by NASA were commercially prepared. A single-ply asbestos substrate was developed, as well as alternative substrates based on cellulose and on polypropylene fibers. The single-ply asbestos was bound with butyl rubber and was functionally superior to the formerly used polyphenylene oxide saturated sheet. Commercially prepared separators exhibited better measured separator properties than the NASA standard. Cycle life in Ni/Zn and Ag/Zn cells was related to substrate, decreasing in the order; asbestos cellulose paper nonwoven polypropylene. The cycle life of solvent-coated separators was better than aqueous in Ni/Zn cells, while aqueous coatings were better in Ag/Zn cells.

Schmidt, George F.↗
DOE OSTI2020

Solvent effects on the heterogeneous growth of TiO 2 nanostructure arrays by solvothermal synthesis

One-dimensional titanium dioxide (TiO 2 ) nanostructure arrays (nanoarrays) are important metal oxide nanomaterials that can be synthesized via facile solvothermal methods. The properties of the organic solvents can impose significant effects on the microstructures and properties of the final products. However, the discussions were limited to the homogeneously nucleated TiO 2 nanomaterials in free-standing powder form, while the solvent effects are less understood during the heterogeneous growth of TiO 2 nanoarrays on a substrate surface. In this work, six organic compounds, namely 2-butanone, n-decane, n-hexane, toluene, ethylene glycol and ethanol, were selected as the solvents for the solvothermal synthesis of TiO 2 nanoarrays on the cordierite monolithic substrates. Special attentions are paid to the morphology, crystallinity, specific surface area, and porosity of the samples. The heterogeneous growth of TiO 2 nanoarrays on substrate surfaces is found to favor the solvents with moderate dielectric constants, which can be partially dissolved in the aqueous solution and modulate the reaction rate during the solvothermal synthesis. Organic solvents with low dielectric constants may result in a complete separation between the precursors and aqueous solution, and therefore slow down the overall reaction, causing the insufficient growth of the nanoarrays. The TiO 2 nanoarrays are obtained with optimum morphology from the combination of 2-butanone and titanium (IV) butoxide as solvent and precusor, respectively, with a high specific surface area up to 56 m 2 /g including cordierite substrate given a micron thickness. When loaded with Pt catalyst, the TiO 2 nanoarray-based monolithic catalysts show excellent low-temperature catalytic activity and hydrothermal stability for the CO and hydrocarbon oxidation under the simulated exhausted conditions. This article shall shed light on a better understanding of the growth mechanism and rational design of TiO 2 nanoarrays for high-performance catalytic converters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rechargeable non-aqueous sodium-air batteries

An electrochemical device includes an air cathode using air as the cathodic gas; a discharge product of sodium peroxide dihydrate; an anode comprising sodium metal; a porous fiber separator; and a non-aqueous electrolyte comprising a sodium salt and a solvent.

25 ENERGY STORAGE↗
DOE OSTI2025

Spectroscopic investigation of cation effects in U(VI)-NO3- complexation in aqueous solutions

Understanding and manipulating uranyl speciation in aqueous solutions is critical for advancing chemical separation, sensing, and understanding environmental transport of uranyl. We report on the significant enhancement in the complexation of uranyl with nitrate in aqueous solutions containing quaternary ammonium cations leading to the formation of anionic complexes. We base this on the comparative study of the effect of monovalent cations (Na+, Li+, NH4+, and N(CH3)4+) on the complexation equilibria of uranyl-nitrate in solutions, probed by time-resolved laser induced fluorescence spectroscopy (TRLFS). Lifetime-corrected spectra, obtained by extrapolating the time-resolved spectra to t = 0, were used to study speciation to mitigate the effects of variations in the fluorescence lifetimes that depend on extraneous factors such as dynamic quenching. We demonstrate that the lifetime-corrected spectra can be used to determine uranyl speciation in aqueous solutions where the mono-nitrate complex forms, and in acetonitrile with N(CH3)4NO3 where di-nitrate and tris-nitrato species are formed. Aqueous solutions containing N(CH3)4+ are shown to promote the formation of higher complexes of uranyl compared to other inorganic nitrate salts based on the higher redshift in the spectra, poor fits to the two-component model, and the higher apparent formation constants. Comparing the trends in uranyl speciation in the presence of N(CH3)4+ in aqueous and acetonitrile solutions, it is proposed that the quaternary ammonium cations (quats) promote the formation of anionic complexes of uranyl by the ion-association mechanism. These results provide a basis for designing quat-assisted separation systems that target anionic actinide species in aqueous solutions.

Nayak, Srikanth (ORCID:0000000302135796)↗
DOE OSTI2020

Current Needs in Radiochemistry

There are a number of current needs in the development of the Pu and Am separations that underpin larger interest areas including nuclear waste issues, nuclear weapons, nuclear forensics, nuclear fuels and similarly related fields. In the large areas of interest, there are a number of sub-fields that include corrosion chemistry, pyrochemistry, solution-phase chemistry, rapid separations, environmental speciation, and other similar efforts. However, in all of the these fields it is important to realize that the underlying chemistry that underpins these efforts is similar in that Pu and Am are bound to ligands that can be in the solid, aqueous, or gas phase and separations occurs due to the preferential binding of the ligand to Pu or Am based on a number of factors that include pH, concentration, oxidation state, etc. In the past, most of the Pu and Am chemistry has occurred in limited scope within universities where micro-scale and bench-top scale chemistry are the dominate investigative theme. At US national laboratory and their international counterparts, larger scale reactions have been attempted such that industrial scale chemistry has been completed. Some of this technology has been harnessed in radiopharmaceuticals and nuclear fuel reprocessing. However, such bench-top research is expensive to due to the safety and security that is concerned when dealing with Pu, and scale-up of reactions is even more resource intensive. In an effort to offset this expensive, it would be of interest to explore the ability to predict selectivity based on the computational modeling of actinide chemistry. This has historically been limited by the abilities of large supercomputers, but with the emphasis on developing exascale computers within the US and similar efforts by other countries this predictive modeling has potential to produce significant results that would yield improved understanding of actinide chemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Leveraging Macrocyclic Chelators for Rare Earth Element Separations

The long-term objective of this project is to develop new, more energy-efficient and environmentally benign separations of the rare earth elements. The current approaches to separate the rare earth elements employ liquid-liquid extraction methods, using a biphasic mixture of aqueous and organic solvents containing different metal-binding agents. Although a significant amount of work has been carried out to develop new organic-phase extractants, significantly less has been executed for the design of aqueous complexants. Our approach to achieve better rare earth separations is to modify and optimize these aqueous complexants for achieving different rare earth-binding properties. Once synthesized, these new complexants were evaluated for more environmentally friendly and energy-efficient separations of the rare earth elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

Aqueous Alteration of Enstatite Chondrites

The Kaidun meteorite is different from all other meteorites [1], consisting largely of a mixture of “incompatible” types of meteoritic material – carbonaceous and enstatite chondrites, i.e. corre-sponding to the most oxidized and the most reduced samples of meteorite materials, including CI1, CM1-2, CV3, EH3-5, and EL3. In addition to these, minor amounts of ordinary and R chondrites are present. In addition, approximately half of the Kaidun lithologies are new materials not known as separate meteorites. Among these are aqueously altered enstatite chondrites [1], which are of considerable interest because they testify that not all reduced asteroids escaped late-stage oxidation, and hydrolysis, and also because hydrated poorly crystalline Si-Fe phase, which in turn is re-placed by serpentine (Figs 3-5). In the end the only indication of the original presence of metal is the re-sidual carbides. In other enstatite chondrite lithogies (of uncertain type) original silicates and metal have been thoroughly replaced by an assemblage of authi-genic plagioclase laths, calcite boxwork, and occasion-al residual grains of silica, Cr-rich troilite, ilmenite, and rare sulfides including heideite (Fig. 6). Fe and S have been largely leached from the rock (Fig. 4). Again the accessory phases are the first clue to the original character of the rock, which can be verified by O isotopes. It is fortunate that Kaidun displays every step of the alteration process.

Zolensky, M. E.↗
DOE OSTI2025

Developing aqueous solubilizing agents as an alternative to solvent extraction

Here, advancing separations science is important for the entire field of chemistry. One partitioning technique that would benefit from improvement is solvent extraction. Despite its effective and widespread use, the method suffers from some problems: generation of flammable organic waste, lengthy process times, and safety concerns associated with contacting organic solvents with acidic aqueous solutions. We developed an alternative separation method inspired by solvent extraction that side-steps those issues. Toward this end, we identified that the functionality of an extractant (an agent used in solvent extraction to pull analytes from the aqueous phase into the organic phase) would change if it was modified for water solubility. In this alternative scenario, the extractant transforms into an “aqueous solubilizing agent.” We discovered that adding this aqueous solubilizing agent alongside a precipitating agent caused the contaminants to precipitate, but not the analyte. This separation concept was demonstrated within the bounds of one of the most difficult partitioning problems, separating minor actinides (Am 3+ ) from lanthanides (Ln 3+ ). We discovered that the (HSO 3 Ph) 4 BTP (aq) aqueous solubilizing agent prevented Am 3+ (aq) from precipitating with Ln 3+ (aq) when f-element precipitating agents (NaF (aq) or HF (aq) ) were added. This separation boasts impressive Am 3+ (aq) recovery yield (90 ± 2 %), near quantitative Ln 3+ (aq) removal, and high separation factors [>3000, Am 3+ (aq) vs. Nd 3+ (aq) ]. It seems likely – given the large number of candidate extractants that could be modified for aqueous solubility and the numerous combinations of existing solubilizing and precipitating agents – that this alternative approach could be used broadly in place of solvent extraction and solve other important separation problems.

(HSO3Ph)4BTP(aq)↗
DOE OSTI2024

Metastable precipitation and ion–extractant transport in liquid–liquid separations of trivalent elements

The extractant-assisted transport of metal ions from aqueous to organic environments by liquid–liquid extraction has been widely used to separate and recover critical elements on an industrial scale. While current efforts focus on designing better extractants and optimizing process conditions, the mechanism that underlies ionic transport remains poorly understood. Here, we report a nonequilibrium process in the bulk aqueous phase that influences interfacial ion transport: the formation of metastable ion–extractant precipitates away from the liquid–liquid interface, separated from it by a depletion region without precipitates. Although the precipitate is soluble in the organic phase, the depletion region separates the two and ions are sequestered in a long-lived metastable state. Since precipitation removes extractants from the aqueous phase, even extractants that are sparingly soluble in water will continue to be withdrawn from the organic phase to feed the aqueous precipitation process. Solute concentrations in both phases and the aqueous pH influence the temporal evolution of the process and ionic partitioning between the precipitate and organic phase. Aqueous ion–extractant precipitation during liquid–liquid extraction provides a reaction path that can influence the extraction kinetics, which plays an important role in designing advanced processes to separate rare earths and other minerals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗