Search NASA⌕ Search

SEARCH · Search NASA

Results for “aromatic compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Time Resolved Visualization of Liquid Jet Interaction With H2-Air Rotating Detonations Using MHz Rate Diesel PLIF

The characterization of the dynamic response of liquid jets to transient detonation wave passage is critical for optimization and modeling of liquid fueled rotating detonation combustors. In this work, a rotating detonation combustor (RDC) is operated on hydrogen and air to sustain stable detonation waves that acts as a detonation driver and interact in a one-way coupled manner with a single liquid fuel jet that propagates into the combustion chamber with cycle periods of ~ 250 μs. Diesel is utilized as a realistic fuel surrogate with higher aromatic compounds to enable fluorescence excitation, using the 355 nm thirdharmonic output of a burst-mode Nd:YAG laser, imaged at rates up to 1 MHz. By optimizing the technique to accommodate orders of magnitude variations in the fuel density throughout the injection process, the PLIF data enable quantitative measurements including the refill time, the relative recovery between liquid and gaseous jets and jet trajectory across various momentum flux ratio. As the passage of the detonation wave imparts significant changes in the momentum flux ratio, the qualitative liquid break-up process and spatial distribution varies significantly in time. As the injection system recovers ~ 70% of the cycle period and return to a quasi-steady position and allow comparisons with theoretical jet trajectories. These data, enabled by ultra-high-speed PLIF imaging, represent some of the first detailed measurements for quantifying the dynamic response and recovery of liquid jets exposed to periodic detonations in an operating RDC.

Propulsion↗
NASA NTRSDate not supplied

Formation of Insoluble Organic Material from the Ultraviolet Irradiation of Laboratory Ice Photolysis Residues

We present preliminary results from the study of ice photolysis residues which were exposed to ultraviolet (UV)/extreme UV (EUV) photon radiation. The residues were produced from the simultaneous deposition and UV irradiation of ice mixtures of astrophysical interest (H2O, CH3OH, CO, NH3, without/with N2 and/or O2, and without/with small quantities of aromatic compounds) at 15–20 K using an H2 lamp, which emits 10.2-eV (121.6 nm) Lyman-α photons and a continuum at 7.5–8 eV (155–165 nm). After warm-up to room temperature and subsequent sublimation of volatile compounds, the refractory materials (residues) recovered at room temperature were analyzed with infrared (IR) microscopy and then further irradiated with UV/EUV photons at a synchrotron facility, on a beamline providing a broad-band photon beam in the 4–45-eV range with a ~1016 photons s-1 flux.2 The residues were UV/EUV irradiated with increasing photon doses ranging from ~1018 to ~1021 photons, i.e., covering 4 orders of magnitude and relevant to those experienced by ice-coated grains in the protosolar nebula.1. After UV/EUV irradiation, residues were analyzed with IR microscopy and the data compared to those before irradiation to identify changes in chemical composition as a function of the photon dose. UV/EUV-irradiated residues were also analyzed with other techniques such as nanoscale secondary-ion mass spectrometry (nanoSIMS) to the study the changes in isotopic composition, and scanning transmission electron microscopy to look at variations in structure and C bonding distribution. Results will be compared with data from extraterrestrial materials, in particular, meteoritic insoluble organic material (IOM) and interplanetary dust particles (IDPs).

Ices↗
DOE OSTI2026

Catabolism of lignin-related methoxylated compounds in white-rot fungi utilizes non-canonical oxidoreductases

White-rot fungi (WRF) are the most effective lignin-degrading organisms in nature, making them essential to Earth’s carbon cycle. Lignin is a highly methoxylated, heterogeneous biopolymer derived from plants. However, the pathways WRF use to metabolize methoxylated aromatic monomericcompounds as carbon sources remain unidentified. Here, we employ a systems biology approach to elucidate the intracellular catabolism of vanillate – a monomethoxylated aromatic compound – in two white-rot fungi (WRF), Gelatoporia subvermispora and Trametes versicolor. We identified and biochemically validated a four-enzyme pathway that converts vanillate into ß-ketoadipate – a metabolite that enters central carbon metabolism. This pathway deviates from typical bacterial pathways, where vanillate is initially demethylated and ring-cleaved by intradiol dioxygenases; instead, oxidative decarboxylation occurs prior to ring cleavage by extradiol dioxygenases. Thus, we conducted an in-depth investigation of ring cleavage and further downstream catabolism by the identified fungal enzymes using biochemical and structural approaches. This revealed non-canonical enzymes, including a highly substrate-specific extradiol dioxygenase and a metal-free, promiscuous reductase, the latter capable of acting on catabolic intermediates derived from both methoxylated and non-methoxylated aromatic compounds. This work emphasizes the potential of WRF and their enzymes to advance lignin valorization and enhance our understanding of their role during wood decay.

dioxygenase↗
NASA NTRS1965

Organic compounds in carbonaceous chondrites.

Aromatic hydrocarbons in carbonaceous chondrites investigated by time-of-flight mass spectrometry and hypothesized as formed in solar nebula under thermodynamic equilibrium

AROMATIC COMPOUND↗
DOE OSTI2025

Spherical Congeners of Polyaromatic Compounds Approaching C 20 - and C 60 -Fullerene-Type Structures

A series of three symmetric, hollow spherical, and shape-persistent molecular organic cages analogous to C 20 and C 60 were examined by computational modeling, analyzing structural elements, strain indicators, and physical properties relevant for potential applications. The compounds are covalent aromatic cages based on 1,3,5-substituted benzene nodes linked by paraphenylene or para-pyrenylene-connectors, with diameters varying from 2.3 to 4.2 nm. The apertures in the cage interior are varied by virtue of the cage type (C 20 - or C 60 -type cage) and the linear connectors placed between the C 6 H 3 -units. NBO and MESP analyses indicate the presence of electrophilic and nucleophilic sites in the molecular skeleton. In the cages with the phenylene-connectors, the HOMO−LUMO gaps are close to 4.0 eV. In the cage coated with an enlarged polyaromatic spacer (pyrene-unit), the gap is reduced by approximately 0.4 eV.

Aromatic compounds↗
DOE OSTI2024

Redox Activity Modulation in Extended Fluorenone-Based Flow Battery Electrolytes with π-π Stacking Effect

Redox flow battery shows promise for grid-scale energy storage. Aqueous organic redox flow batteries are particularly popular due to their potentially low material cost and safe water-based electrolyte. Commonly, redox active molecules used in this field feature aromatic rings, and increasing π-aromatic conjugation has been a popular strategy to achieve high energy density, high power density, and reduced crossover in new material design. However, this approach can inadvertently hinder redox activity depending on redox mechanism. This study reveals the underlying π-π stacking effect in extended aromatic redox active compounds, where aromatic radical intermediates are involved in the redox process. We report a molecular design strategy to mitigate the negative effect of π-π stacking by altering solvation dynamics and introducing molecular steric hindrance.

25 ENERGY STORAGE↗
NASA NTRS1990

Vinyl capped addition polyimides

Polyimide resins having improved thermo-oxidative stability are provided having aromatic vinyl end-caps. The polyimides are prepared by the reaction of a mixture of monomers comprising (1) a diamine, (2) an ester of tetracarboxylic acid and (3) an aromatic vinyl compound in a molar ratio of 1:2:3 of n: (n + 1):2 when the aromatic vinyl compound contains nitrogen and in a ratio of (n + 1):n:2 when the aromatic vinyl compound does not contain nitrogen, wherein n ranges from about 5 to about 20.

Vannucci, Raymond D.↗
DOE OSTI2026

Using Novosphingobium aromaticivorans for Concurrent Production of Intracellular and Extracellular Products from Aromatics Extracted from Poplar Biomass

Achieving high biochemical production in biotransformations of renewable resources requires using concentrated cultures that not only generate the product of interest but also produce abundant microbial cell waste. We explored the concept of gaining value from microbial cells by producing intracellular products in tandem with a desired extracellular product. Specifically, we engineered a strain ofNovosphingobium aromaticivorans to extracellularly produce 2-pyrone-4,6-dicarboxylic acid (PDC) from aromatic substrates and to intracellularly accumulate astaxanthin along with coenzyme Q 10 , all of which are products of industrial interest. Achieving the goal of concurrent production of intracellular and extracellular products required the creative application of bioreactor engineering principles. Although a continuously fed membrane bioreactor (MBR) maximized extracellular product biosynthesis, it had a negative effect on intracellular product accumulation. However, operating the MBR as a sequencing batch reactor (MBR-SBR) with a step-feed resulted in stable concurrent production of both extracellular and intracellular products. With aromatics extracted from poplar biomass, we achieved productivities of 1.14 g of PDC/L-h for the extracellular product and 0.04 mg of astaxanthin/L-h and 0.64 mg of CoQ 10 /L-h for intracellular products, respectively. Our findings demonstrate that the mode of operation of a bioreactor impacts the simultaneous production of intracellular and extracellular products byN. aromaticivorans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Polyimidazoles via aromatic nucleophilic displacement

Polyimidazoles (Pl) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl)imidazole monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The reactions are carried out in polar aprotic solvents such as N,N-dimethylacetamide, sulfolane, N-methylpyrroldinone, dimethylsulfoxide, or diphenylsulfone using alkali metal bases such as potassium carbonate at elevated temperature under nitrogen. The di(hydroxyphenyl)imidazole monomers are prepared by reacting an aromatic aldehyde with a dimethoxybenzil or by reacting an aromatic dialdehyde with a methoxybenzil in the presence of ammonium acetate. The di(methoxyphenyl)imidazole is subsequently treated with aqueous hydrobromic acid to give the di(hydroxyphenyl)imidazole monomer. This synthetic route has provided high molecular weight Pl of new chemical structure, is economically and synthetically more favorable than other routes, and allows for facile chemical structure variation due to the availability of a large variety of activated aromatic dihalides and dinitro compounds.

Connell, John W.↗
NASA NTRS1992

Polyimidazoles via aromatic nucleophilic displacement

Polyimidazoles (PI) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl) imidazole monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The reactions are carried out in polar aprotic solvents such as N,N-dimethyl acetamide, sulfolane, N-methylpyrrolidinone, dimethylsulfoxide, or diphenylsulfone using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. The di(hydroxyphenyl) imidazole monomers are prepared by reacting an aromatic aldehyde with a dimethoxybenzil or by reacting an aromatic dialdehyde with a methoxybenzil in the presence of ammonium acetate. The di(methoxyphenyl) imidazole is subsequently treated with aqueous hydrobromic acid to give the di(hydroxphenyl) imidazole monomer. This synthetic route has provided high molecular weight PI of new chemical structure, is economically and synthetically more favorable than other routes, and allows for facile chemical structure variation due to the availability of a large variety of activated aromatic dihalides and dinitro compounds.

Connell, John W.↗
DOE OSTI2025

Analysis of semivolatile organics in liquid radioactive residue using sorptive stir bar and solvent back-extraction

Current methods for semivolatiles analysis in radioactive samples can produce large volumes of radioactive solvent residue. A method utilizing stir-bar sorptive extraction has been explored in this work for its applicability to radioactive waste samples. This low solvent analytical method may accelerate remediation, minimize hazardous solvent waste, and reduce exposure risk to workers. Organic compounds (polyaromatic hydrocarbons, chlorinated aromatics, and phenolic compounds) were chosen as surrogates for common Liquid Waste System (LWS) contaminants at Savannah River Site (Aiken, SC). Stir-bar extraction parameters (extraction time, matrix modification, and effective pH range) and solvent back extraction parameters (solvent type, volume, and extraction time) were optimized experimentally for the chosen compounds. Affinity of the stir-bar extraction polymer to radionuclides Cs-137 and Am-241 was observed to determine radionuclide concentration effects. The stir-bar method achieved mean recovery of 100 ± 0.7% (1σ), relative to 114 ± 7% using solvent extraction, while reducing weekly method hands-on time by 93.4% and solvent volume consumption by 99.3%. Sensitivity was improved by 378% in simulated tank waste and 278% in real-world LWS matrix, relative to solvent extraction. This work has produced a safe and optimized method for the low solvent analysis of organics in legacy radioactive tank waste by stir-bar sorptive extraction.

GC-MS↗
NASA NTRS1977

Trimerization of aromatic nitriles

Triazine compounds and cross-linked polymer compositions were made by heating aromatic nitriles to a temperature in the range of about 100 C to about 700 C, in the presence of a catalyst or mixture of catalysts. Aromatic nitrile-modified (terminated and/or appended) imide, benzimidazole, imidazopyrrolone, quinoxaline, and other condensation type prepolymers or their precopolymers were made which were trimerized with or without a filler by the aforementioned catalytic trimerization process.

Hsu, L. C.↗
NASA NTRS1991

Vinyl capped addition polyimides

Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

Vannucci, Raymond D.↗
NASA NTRS2023

Investigating the Impact of X-Ray Computed Tomography Imaging on Soluble Organic Matter in the Murchison Meteorite: Implications for Bennu Sample Analyses

X-ray computed tomography (XCT) is a valuable reconnaissance tool for three-dimensional imaging and identification of distinct lithologies in extraterrestrial samples. It will be used as part of the preliminary examination of samples returned from asteroid (101955) Bennu by the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission. However, it must first be established whether x-rays generated during XCT could degrade or alter the organic composition of the returned samples by radiolysis. To test this, we split a crushed sample of the Murchison CM2 meteorite, kept one portion as a control, and irradiated the other portion up to the maximum x-ray dosage (~180 Gy) that a Bennu sample would experience during an XCT imaging experiment. We then extracted organic compounds from both splits and conducted (i) nontargeted soluble organic analyses to compare the chemical distributions of C-, H-, O-, N-, and S-bearing species and (ii) targeted measurements to quantify the abundances of 96 individual soluble organic molecules that included protein amino acids, amines, carboxylic acids, hydroxy acids, carbonyl compounds, polycyclic aromatic hydrocarbons, alcohols, sugars, and N-heterocycles. We found that XCT imaging of the Murchison meteorite had no measurable impact on the relative abundances or enantiomeric compositions of most of the soluble organic compounds targeted in this study. Elevated total abundances of several soluble organic compound classes were observed in the XCT-scanned Murchison sample relative to the control. This is likely related to particle size heterogeneity and specific surface area differences between the sample aliquots used for the extractions, rather than a result of the x-ray exposure. Assuming the samples returned from asteroid Bennu by OSIRIS-REx have a similar composition to carbonaceous chondrites, these data provide confidence that XCT will not significantly alter their soluble organic compositions.

Daniel P Glavin↗
NASA NTRS1971

High-resolution mass spectrometry of nitrogenous compounds of the Colorado Green River formation oil shale.

Basic nitrogenous compounds isolated from extracts of Green River Formation oil shale were analyzed. The major homologous constituents found were the compositional types - namely, quinolines, tetrahydrequinolines with minor amounts of pyridines and indoles series and traces of more aromatized nitrogen compounds. These results are correlated with nitrogen compounds isolated from Green River Formation retort oil and are a survey of the unaltered nitrogen compounds indigeneous to the shale.

Simoneit, B. R.↗
NASA NTRS1976

Extensive 1-year survey of trace elements and compounds in the airborne suspended particulate matter in Cleveland, Ohio

Concentrations of 75 chemical constituents in the airborne particulate matter were measured in Cleveland, Ohio, during 1971 and 1972. Values covering a 1-year period (45 to 50 sampling days) at each of 16 sites are presented for 60 elements. A lesser number of values is given for sulfate, nitrate, fluoride, acidity, 10 polynuclear aromatic hydrocarbon compounds, and the aliphatic hydrocarbon compounds as a group. Methods used included instrumental neutron activation, emission spectroscopy, gas chromatography, combustion techniques, and colorimetry. Uncertainties in the concentrations associated with the sampling procedures, the analysis methods, the use of several analytical facilities, and samples with concentrations below the detection limits are evaluated in detail. The data is discussed in relation to other studies and source origins. The trace constituent concentrations as a function of wind direction are used to suggest a practical method for air pollution source identification.

King, R. B.↗