SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The system of an astrometric telescope on the Space Station and its support by the Station are described and its feasibility demonstrated. The conceptual design shows that such a facility provides a basis for the study of design alternatives and a point of departure for a detailed design. Basic requirements for this preliminary design are outlined.
The transformation of the Oak Ridge astrometry from a photographic program to a charge coupled device (CCD) program can now be considered complete, and the number of observations being made is now approaching an order of magnitude greater than in the old photographic program. Astrometric observations with the 1.5-m reflector were made at the Oak Ridge Observatory, and the progress, accomplishments, and projected accomplishments are presented.
Using data from Allegheny Observatory's Thaw/MAP astrometric system, absolute parallaxes are presented for Chi Cygni, 51 Andromedae, the newly discovered RS CVn variable OP Andromedae, and selected stars in these fields. Using existing angular diameter measures and the new parallaxes, linear diameters for Chi Cygni and 51 And are given. Chi Cygni has a perturbation in declination having a period of 0.75 yr and an amplitude of +/- 5 mas. Owing to the extreme variability of Chi Cygni, no further characterization of the system is possible at this time. Other results of spectral interest include the detection of a perturbation in the motion of BD +47 deg 466. This system was found to have a parallax of 14.4 +/- 1.2 mas.
The paper describes the objectives, techniques, instrumentation, and mission of the planned Astrometric Imaging Telescope. This space-based observatory is designed to detect and characterize extra-solar planetary systems. Results will contribute to the understanding of the astrophysics of stellar and planetary formation and provide an impetus for the study of exobiology.
The Multichannel Astrometric Photometer (MAP) was used to determine parallaxes of stars in the region centered on the Mira variable R Leonis. R Leonis, with a parallax of 8.3 +/- 1.0 mas (120 +/- 15 pc), is significantly closer than most recent estimates. At visual wavelengths, its mean physical diameter is 612 +/- 96 times that of the sun. The photocentric motion of R Leonis is not suggestive of either optical or orbital companions, excluding possible secondary components over a wide range of magnitudes as well as orbital periods of up to approximately one decade. Nineteen Leonis, an occultation-speckle binary with a well-determined orbit and a reference star in the R Leonis field, has a distance of 92.6 +/- 12 pc. The 15.2 yr period binary exhibits a slight perturbation during the 4 yr of MAP observations. The similar primary and secondary of this A7 Vn system are 2.41 +/- 0.96 and 2.31 +/- 0.92 solar masses, respectively.
In this paper we discuss the influence of guiding on the motion of a comet on the derived astrometric position.
In this paper we propose a new method for photographic astrometric observations of asteroids. We discuss its advantages and disadvantages and compare them to the advantages and disadvantages of the classical photographic methods. The new method is best suited for observations on a spot where no CCD cameras, blink or stereo comparators are available and when a fast detection of unknown objects is required.
The astrometric telescope facility (ATF), a 20-meter telescope designed for long-term detection and observation of planetary systems outside of the solar system, is scheduled to be a major user of the Space Station's payload pointing system (PPS) capabilities. However, because the ATF has such a stringent pointing stability specification (as low as 0.01 arcsec error over the frequency range from 5 to 200 hertz) and requires +/- 180-degree roll rotation around the telescope's line of sight, the ATF's utilization of the PPS requires the addition of a mechanism or mechanisms to enhance the basic PPS capabilities. The results of a study conducted to investigate the ATF pointing performance achievable by the addition of a magnetic isolation and pointing (MIPS) system between the PPS upper gimbal and the ATF, and separately, by the addition of a passive isolation system between the Space Station and the PPS base are presented. In addition, the study produced requirements on magnetic force and gap motion as a function of the level of Space Station disturbance. These results were used to support the definition of a candidate MIPS. Pointing performance results from the study indicate that a MIPS can meet the ATF pointing requirements in the presence of a PPS base transitional acceleration of up to 0.018g, with reasonable restrictions placed on the isolation and pointing bandwidths. By contrast, the passive base isolator system must have an unrealistically low isolation bandwidth on all axes (less than 0.1 hertz) to meet ATF pointing requirements. The candidate MIPS is based on an assumed base translational disturbance of 0.01g. The system fits within the available annular region between the PPS and ATF while meeting power and weight limitations and providing the required payload roll motion. Payload data and power services are provided by noncontacting transfer devices.
Each of the three fine guidance sensors for the Hubble Space Telescope constitutes a sixth science instrument to be used for astrometry. We detail the tests and results used in choosing one of the three sensors to be the prime astrometer. The Astrometry Science Team has chosen Fine Guidance Sensor (FGS) 3. FGS 3 produces position measurements on a star with V = 17 with a peraxis precision of 0.003 arcsec. The interferometer response function should permit double-star astrometry at least down to V = 16 for the central region of FGS 3. In a 10-h test of the stability of POS-mode astrometric measurements made in FGS 3, we found no scale or orientation variations greater than two parts in 100,000. During this same time period, we found no statistically significant systematic guide-star radial separation changes. Spacecraft jitter is found to be the prime determinant of astrometry success or failure.
A minute displacement of the radio source in Algol was measured by VLBI during two consecutive orbital revolutions of the close binary. The magnitude of the displacement unambiguously indicates that the less massive star of the close binary, a K subgiant, is the star responsible for the nonthermal radio emission of the system. This is consistent with the idea that the radio emission in Algol is related to the strong magnetic activity of the subgiant. The orientation and sense of the displacement on the sky that are directly deduced from our astrometric VLBI observations imply: (1) that the orbital plane of the close binary is at P.A. = +52 deg +/- 5 deg; and (2) that the sense of circulation of the close binary is clockwise, as seen on the sky. Thus, the long-period and close binary orbital motions are almost orthogonal and counterrevolving and this is relevant for evolution and dynamical studies.
MODEST estimates propagation delays and geodetic and astrometric parlameters. MODEST is delay-model (MOD) and parameter-estimation (EST) program that takes into account such delay effects as those related to geometry, clock, troposphere, and ionosphere. Written in FORTRAN 77, C language, and VAX Assembler for DEC VAX-series computers running VMS.
Infrared interferometric demonstrations with the University of California, Berkeley's infrared spatial interferometer (ISI) on Mt. Wilson explore the potential of infrared and optical astrometry for deep space tracking, reference frame development, and DSN science. Astrometric data taken and analyzed over the last five years from the ISI have shown that instrumental and atmospheric effects limit current demonstrations. The benefits of sensitivity upgrades, which were performed in 1991 and 1992, have been demonstrated by comparing point-to-point phase fluctuations for the fall 1989 and fall 1992 observing epochs. This comparison showed that point-to-point phase fluctuations due to tropospheric and quantum noise, for optimal integration times of 0.2 sec, are approaching the 0.1-cycle level needed to reliably connect the interferometric phase. The increase in sensitivity, coupled with that arising from very recent hardware upgrades, will greatly enhance phase-connection capabilities necessary for astrometry in the presence of atmospheric refractivity fluctuations. The current data set suggests that atmospheric fluctuations on Mt. Wilson during the best seeing are dominated by a low-lying component, approximately 25 m high, which may be minimized with in situ calibration in the future. During poor seeing conditions that currently prohibit the interferometric phase connection necessary for astrometry, fluctuations seem to be generated by atmospheric inhomogeneities at much higher altitudes above Mt. Wilson. Data taken over the last year suggest that the ISI will soon be able to achieve 50- to 100-nrad astrometry in a single observing session, employing current ground-based laser distance interferometer calibrations to minimize atmospheric effects.
We present finding charts and optical positions accurate to less than 1 arcsec for 269 bright (V less than or = 18.5) Quasi-Stellar Objects (QSOs). These objects were selected as candidates for the Hubble Space Telescope (HST) Quasar Absorption System Snapshot Survey (AbSnap), a program designed to use the Faint Object Spectrograph (FOS) to obtain short exposure ultraviolet (UV) spectra of bright QSOs. Many quasars were included because of their proximity to bright, low redshift galaxies and positions of these QSOs are measured accurately for the first time. Data were obtained using the digitized sky survey produced by the Space Telescope Science Institute's Guide Stars Selection System Astrometric Support Program.
Astrometric positions for the faint outer Jovian satellites VI-XIII during the 1993 opposition have been obtained from the measurement of plates taken with the 2.1 m Otto Struve reflector at McDonald Observatory.
An earlier series of photographic observations was made with the 1.5-m reflector from 1972 to 1989. The start of the series to which this report refers occurred shortly before the conversion from photographic to CCD operation in August 1989, at which point there was a dramatic increase in the productivity of the program. This is evident gives a month-by-month summary of the observations; the earlier data refer to the measurement or remeasurement of photographic plates previously taken with the same telescope. The total number of observations made was 24,423, of which 1338 were of comets. Of the 23,085 observations of asteroids, 21,529 referred to asteroids that were unnumbered when the observations were made. Since an important emphasis of the program was to improve knowledge of the orbits to the point where asteroids can be numbered, the fact that only 4262 of the observations refer to asteroids that are still unnumbered is a measure of the program's success, with 30-35 percent of all the new numberings being habitually made solely because of the recent data from the Oak Ridge program, which even at the time of McCrosky's retirement was still the fourth largest comet-asteroid astrometric program in the world.
The International Celestial Reference Frame (ICRF) could be of significant importance to the astronomy community for observing weak objects angularly close to ICRF sources with the phase-referencing technique. However, the current distribution of the ICRF sources is found to be largely non-uniform, which precludes the wide use of the ICRF as a catalog of calibrators for phase-referencing observations. We show that adding 150 new sources at appropriate sky locations would reduce the distance to the nearest ICRF source for any randomly-chosen location in the northern sky from up to 13 deg to up to 6 deg, close to the requirement of the phase-referencing technique. Accordingly, a set of 150 such sources, selected from the Jodrell Bank-VLA Astrometric Survey and filtered out using the Very Long Baseline Array Calibrator Survey, has been proposed for observation to the European VLBI Network (EVN) extended with additional geodetic stations. The use of the EVN is essential to this project since most of the new sources will be weaker and thus difficult to observe with standard geodetic networks.
Using astrometric interferometry on near-Earth objects (NEOs) poses many interesting and difficult challenges. Poor reflectance properties and potentially no significant active emissions lead to NEOs having intrinsically low visual magnitudes. Using worst case estimates for signal reflection properties leads to NEOs having visual magnitudes of 27 and higher. Today the most sensitive interferometers in operation have limiting magnitudes of 20 or less. The main reason for this limit is due to the atmosphere, where turbulence affects the light coming from the target, limiting the sensitivity of the interferometer. In this analysis, the interferometer designs assume no atmosphere, meaning they would be placed at a location somewhere in space. Interferometer configurations and operational uncertainties are looked at in order to parameterize the requirements necessary to achieve measurements of low visual magnitude NEOs. This analysis provides a preliminary estimate of what will be required in order to take high resolution measurements of these objects using interferometry techniques.
This paper discusses new fundamental physics experiment that will test relativistic gravity at the accuracy better than the effects of the second order in the gravitational field strength, proportional to G(sup 2). The Laser Astrometric Test Of Relativity (LATOR) mission uses laser interferometry between two micro-spacecraft whose lines of sight pass close by the Sun to accurately measure deflection of light in the solar gravity. The key element of the experimental design is a redundant geometry optical truss provided by a long-baseline (100 m) multi-channel stellar optical interferometer placed on the International Space Station (ISS). The spatial interferometer is used for measuring the angles between the two spacecraft and for orbit determination purposes. In Euclidean geometry, determination of a triangle s three sides determines any angle therein; with gravity changing the optical lengths of sides passing close by the Sun and deflecting the light, the Euclidean relationships are overthrown. The geometric redundancy enables LATOR to measure the departure from Euclidean geometry caused by the solar gravity field to a very high accuracy. LATOR will not only improve the value of the parameterized post-Newtonian (PPN) gamma to unprecedented levels of accuracy of 1 part in 10(exp 8), it will also reach ability to measure effects of the next post-Newtonian order (c(sup -4)) of light deflection resulting from gravity s intrinsic non-linearity. The solar quadrupole moment parameter, J(sub 2), will be measured with high precision, as well as a variety of other relativistic effects including Lense-Thirring precession. LATOR will lead to very robust advances in the tests of Fundamental physics: this mission could discover a violation or extension of general relativity, or reveal the presence of an additional long range interaction in the physical law. There are no analogs to the LATOR experiment; it is unique and is a natural culmination of solar system gravity experiments.