Search NASA⌕ Search

SEARCH · Search NASA

Results for “automatic generation control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Kinematically redundant robot manipulators

Research on control, design and programming of kinematically redundant robot manipulators (KRRM) is discussed. These are devices in which there are more joint space degrees of freedom than are required to achieve every position and orientation of the end-effector necessary for a given task in a given workspace. The technological developments described here deal with: kinematic programming techniques for automatically generating joint-space trajectories to execute prescribed tasks; control of redundant manipulators to optimize dynamic criteria (e.g., applications of forces and moments at the end-effector that optimally distribute the loading of actuators); and design of KRRMs to optimize functionality in congested work environments or to achieve other goals unattainable with non-redundant manipulators. Kinematic programming techniques are discussed, which show that some pseudo-inverse techniques that have been proposed for redundant manipulator control fail to achieve the goals of avoiding kinematic singularities and also generating closed joint-space paths corresponding to close paths of the end effector in the workspace. The extended Jacobian is proposed as an alternative to pseudo-inverse techniques.

Baillieul, J.↗
DOE OSTI2020

Grid stabilization using adjusted voltage regulator response to grid characteristics

Apparatus and methods are disclosed for control systems for improving stability of electrical grids by temporarily reducing voltage output of electrical generators responsive to transient events on an electrical grid. In one example of the disclosed technology, a controller is coupled is to an automatic voltage regulator, which in turn adjusts excitation current of an electrical generator responsive to changes in frequency detected for the electrical grid. Reducing the output voltage temporarily allows for smaller generators to provide power to the microgrid. Methods for selecting parameters determining how the controller generates a regulation signal used to adjust the excitation current are further disclosed.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Autonomous Voltage Response for Distributed Energy Resources

An implementation of stable droop voltage response for distributed energy resources (DER) is described. The key point is to use a new “autonomously adjusting reference voltage” as described in IEEE Standard 1547-2018. Examples include battery voltage response, a photovoltaic inverter at the end of a long secondary circuit, and 18 photovoltaic inverters on a distribution lateral. Default inverter settings are proposed for DER that would mitigate voltage fluctuations, with or without communications.

Automatic voltage control, distributed power gener↗
NASA NTRS2018

Microwave Radar Sensor Modules

Systems and methods for detecting biometrics using microwave radar sensor modules are disclosed. Integrated microwave sensor modules can include a transmitter unit configured to generate at least one continuous wave transmit signal based upon at least one frequency control signal, a receiver unit configured to utilize a cancellation path to cancel contributions to a return signal based upon at least one cancellation path control signal, and a microcontroller unit that includes a processor, a memory containing a microcontroller application, where the microcontroller application configures the processor to generate at least one frequency control signal to generate least one CW transmit signal having a plurality of frequencies, generate at least one cancellation path control signal to automatically adjust the cancellation path in real time, receive at least one demodulated signal, digitize the at least one demodulated signal, and update the at least one frequency control and cancellation path control signals.

Lux, James Paul↗
DOE OSTI2024

Microgrid Service Restoration Incorporating Unmonitored Automatic Voltage Controllers and Net Metered Loads

Islanded microgrids may experience voltage and frequency instability due to uncontrolled state changes of voltage regulation devices and inaccurate demand forecasts. Uncontrolled state changes can occur if optimal microgrid restoration and dispatch algorithms, used for generating control commands for distributed energy resources, do not incorporate the behavior of automatic controllers of voltage regulation devices. Inaccurate demand forecasts may be encountered since post-outage demand of behind-the-meter net metered (NM) loads can vary significantly from their historical NM profiles. Here, this paper proposes an optimization formulation which allows optimal control of voltage regulators and capacitor banks without remote control and communication capabilities. A generalized demand model for NM loads is proposed which incorporates the cold load pickup phenomenon and their time varying post-outage demand in accordance with the IEEE 1547 standard. The time dependent optimal control formulation and the NM demand model are integrated in a sequential microgrid restoration algorithm by linearization of the involved logic propositions. A detailed case study on the unbalanced IEEE 123-node test system in OpenDSS validates the effectiveness of the proposed approach.

30 DIRECT ENERGY CONVERSION↗
NASA NTRSDate not supplied

Automatic Generation of Guard-Stable Floating-Point Code

In floating-point programs, test instability occurs when the control flow of a conditional statement diverges from its ideal execution under real arithmetic. This phenomenon is caused by the presence of round-off errors in floating-point computations. Writing programs that correctly handle test instability often require expertise on finite precision computations and rounding errors. This paper presents a fully automatic tool chain that generates and formally verifies a test-stable floating-point C program from its functional specification in real arithmetic. The generated program is instrumented to soundly detect when unstable tests may occur and, in these cases, to issue a warning. The proposed approach combines the PRECiSA floating-point static analyzer, the Frama-C software verification suite, and the PVS theorem prover.

Floating-Point Arithmetic↗
NASA NTRS2015

Adaptive Shape Control for Aerodynamic Design

We present an approach to aerodynamic optimization in which the shape control is adaptively parameterized. Starting from a coarse set of design variables, a sequence of higher-dimensional nested search spaces is automatically generated. Refinement can be either uniform or adaptive, in which case only the most important shape control is added. The relative importance of candidate design variables is determined by comparing objective and constraint gradients, computed at low cost via adjoint solutions. A search procedure for finding an effective ensemble of shape parameters is also given. We first demonstrate this system on a multipoint drag miminization problem in 2D with many constraints, showing that an adaptive parameterization approach consistently achieves smoother, more robust, and faster design improvement than fixed parameterizations. We also establish a 3D shape- matching benchmark, where we demonstrate that our approach automatically discovers the necessary parameters to match a target shape. By largely automating shape parameterization, this work also aims to remove a time-consuming aspect of shape optimization.

Aerodynamic Design↗
NASA NTRS2001

Power Management for Space Advanced Life Support

Space power systems include the power source, storage, and management subsystems. In current crewed spacecraft, solar cells are the power source, batteries provide storage, and the crew performs any required load scheduling. For future crewed planetary surface systems using Advanced Life Support, we assume that plants will be grown to produce much of the crew's food and that nuclear power will be employed. Battery storage is much more costly than nuclear power capacity and so is not likely to be used. We investigate the scheduling of power demands by the crew or automatic control, to reduce the peak power load and the required generating capacity. The peak to average power ratio is a good measure of power use efficiency. We can easily schedule power demands to reduce the peak power from its maximum, but simple scheduling approaches may not find the lowest possible peak to average power ratio. An initial power scheduling example was simple enough for a human to solve, but a more complex example with many intermittent load demands required automatic scheduling. Excess power is a free resource and can be used even for minor benefits.

Jones, Harry↗
DOE OSTI2020

Distributed Aerodynamic Control using Active Trailing-Edge Flaps for Large Wind Turbines

This work presents a numerical framework to investigate distributed aerodynamic control devices for application in large wind turbines. Tool capabilities were extended to facilitate multiple aerodynamic polar tables. The airfoil aerodynamics characteristics were automatically determined, and blade-pitch, generator-torque, and trailing-edge-flap controllers were tuned in-the-loop according to a specific blade design. This automated workflow allows analysis and optimization of trailing-edge flaps, enabling codesign studies. Results targeted reductions of root-flap-bending moment derivatives. The applied trailing-edge-flap control reduced the standard deviation of root-flap-bending moments by more than 6% and benefit related parameters, e.g., reduce blade-tip deflections, by up to 8%. Because of varying thrust distributions along the blade span, different flap designs have nonlinear characteristics in terms of the control objective and show best performance when located at the radial position with maximum thrust. In general, larger flaps provide a greater influence to reduce the target control objective.

17 WIND ENERGY↗
NASA NTRS1974

Mariner Mars 1971 attitude control subsystem

The Mariner Mars 1971 attitude control subsystem (ACS) is discussed. It is comprised of a sun sensor set, a Canopus tracker, an inertial reference unit, two cold gas reaction control assemblies, two rocket engine gimbal actuators, and an attitude control electronics unit. The subsystem has the following eight operating modes: (1) launch, (2) sun acquisition, (3) roll search, (4) celestial cruise, (5) all-axes inertial, (6) roll inertial, (7) commanded turn, and (8) thrust vector control. In the celestial cruise mode, the position control is held to plus or minus 0.25 deg. Commanded turn rates are plus or minus 0.18 deg/s. The attitude control logic in conjunction with command inputs from other spacecraft subsystems establishes the ACS operating mode. The logic utilizes Sun and Canopus acquisition signals generated within the ACS to perform automatic mode switching so that dependence of ground control is minimized when operating in the sun acquisition, roll search, and celestial cruise modes. The total ACS weight is 65.7 lb, and includes 5.4 lb of nitrogen gas. Total power requirements vary from 9 W for the celestial cruise mode to 54 W for the commanded turn mode.

Edmunds, R. S.↗
NASA NTRS1977

Orbital servicing and remotely manned systems

The potential of the concepts and techniques of remotely manned aerospace systems to fully exploit the utility and benefits of orbital servicing is discussed. Orbital servicing has been shown to benefit the Space Transportation System by helping to satisfy spacecraft program objectives of long operating times on-orbit while reducing program costs. The wide range of servicer mechanisms postulated in the literature is reduced to two concepts which are used to generate a set of control system requirements. Three control mode alternatives - automatic, supervisory control, and remotely manned control - are introduced, defined, evaluated and each found wanting in certain areas. A combination of supervisory and remotely manned control is shown to overcome most problems.

Smith, G. W.↗
NASA NTRS1988

Knowledge-based approach to system integration

To solve complex problems one can often use the decomposition principle. However, a problem is seldom decomposable into completely independent subproblems. System integration deals with problem of resolving the interdependencies and the integration of the subsolutions. A natural method of decomposition is the hierarchical one. High-level specifications are broken down into lower level specifications until they can be transformed into solutions relatively easily. By automating the hierarchical decomposition and solution generation an integrated system is obtained in which the declaration of high level specifications is enough to solve the problem. We offer a knowledge-based approach to integrate the development and building of control systems. The process modeling is supported by using graphic editors. The user selects and connects icons that represent subprocesses and might refer to prewritten programs. The graphical editor assists the user in selecting parameters for each subprocess and allows the testing of a specific configuration. Next, from the definitions created by the graphical editor, the actual control program is built. Fault-diagnosis routines are generated automatically as well. Since the user is not required to write program code and knowledge about the process is present in the development system, the user is not required to have expertise in many fields.

Blokland, W.↗
NASA NTRS2018

Verifying Interfaces and Generating Interface Control Documents for the Alignment and Phasing Subsystem of the Thirty Meter Telescope from a System Model in SysML

This paper presents a novel method for verifying interfaces and generating interface control documents (ICDs) from a system model in SysMLTM. In systems and software engineering, ICDs are key artifacts that specify the interface(s) to a system or subsystem, and are used to control the documentation of these interfaces. ICDs enable independent teams to develop connecting systems that use the specified interfaces. In the context of the Thirty Meter Telescope (TMT), interface control documents also act as contracts for delivered subsystems. The Alignment and Phasing system (APS) is one such subsystem. APS is required to implement a particular interface, and formulates requirements for the interfaces to be provided by other components of TMT that interface with APS. As the design of APS matures, these interfaces are frequently refined, making it necessary for related ICDs to be updated. In current systems engineering practice, ICDs are maintained manually. This manual maintenance can lead to a loss in integrity and accuracy of the documents over time, resulting in the documents no longer reflecting the actual state of the interfaces of a system. We show how a system model in SysMLTM can be used to generate ICDs automatically. The method is demonstrated through application to interface control documents pertaining to APS. Specifically, we apply the method to the interface of APS to the primary mirror control system (M1CS) and of APS to the Telescope Control System (TCS). We evaluate the newly introduced method through application to two case studies.

Troy, Mitchell↗
NASA NTRS1991

Sensor-knowledge-command fusion paradigm for man/machine systems

Sensing-knowledge-command (SKC) fusion is presented as a fundamental paradigm of implementing cooperative control for an advanced man-machine system. SKC fusion operates on the 'SKC fusion network,' which represents the connection between sensor data to commands through knowledge. Sensing, knowledge, and command of a human and a machine are tapped into the network to provide inputs, or stimuli, to the network. Such stimuli automatically invoke an SKC fusion process and generate a fused output for cooperative control. Once invoked by stimuli, the SKC fusion process forces the network to converge to a new equilibrium state through the network dynamics composed of data fusion, feature transformation, and constraint propagation. The SKC fusion process thus integrates redundant information, maintains network consistency, identifies faulty data and concepts, and specifies those concepts to be strengthened through sensor planning.

Lee, Sukhan↗
NASA NTRS1988

Spur gears: Optimal geometry, methods for generation and Tooth Contact Analysis (TCA) program

The contents of this report include the following: (1) development of optimal geometry for crowned spur gears; (2) methods for their generation; and (3) tooth contact analysis (TCA) computer programs for the analysis of meshing and bearing contact on the crowned spur gears. The method developed for synthesis is used for the determination of the optimal geometry for crowned pinion surface and is directed to reduce the sensitivity of the gears to misalignment, localize the bearing contact, and guarantee the favorable shape and low level of the transmission errors. A new method for the generation of the crowned pinion surface has been proposed. This method is based on application of the tool with a surface of revolution that slightly deviates from a regular cone surface. The tool can be used as a grinding wheel or as a shaver. The crowned pinion surface can also be generated by a generating plane whose motion is provided by an automatic grinding machine controlled by a computer. The TCA program simulates the meshing and bearing contact of the misaligned gears. The transmission errors are also determined.

Litvin, Faydor L.↗
NASA NTRS1996

NanoDesign: Concepts and Software for a Nanotechnology Based on Functionalized Fullerenes

Eric Drexler has proposed a hypothetical nanotechnology based on diamond and investigated the properties of such molecular systems. While attractive, diamonoid nanotechnology is not physically accessible with straightforward extensions of current laboratory techniques. We propose a nanotechnology based on functionalized fullerenes and investigate carbon nanotube based gears with teeth added via a benzyne reaction known to occur with C60. The gears are single-walled carbon nanotubes with appended coenzyme groups for teeth. Fullerenes are in widespread laboratory use and can be functionalized in many ways. Companion papers computationally demonstrate the properties of these gears (they appear to work) and the accessibility of the benzyne/nanotube reaction. This paper describes the molecular design techniques and rationale as well as the software that implements these design techniques. The software is a set of persistent C++ objects controlled by TCL command scripts. The c++/tcl interface is automatically generated by a software system called tcl_c++ developed by the author and described here. The objects keep track of different portions of the molecular machinery to allow different simulation techniques and boundary conditions to be applied as appropriate. This capability has been required to demonstrate (computationally) our gear's feasibility. A new distributed software architecture featuring a WWW universal client, CORBA distributed objects, and agent software is under consideration. The software architecture is intended to eventually enable a widely disbursed group to develop complex simulated molecular machines.

Globus, Al↗