Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass handling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Algal Feedstock Logistics and Handling

The project aims to study wet, anaerobic storage to mitigate seasonal variation in algae productivity to reduce the risk of feedstock loos prior to conversion and to study how to enable the storage period to be used to add value to algae biomass without affecting the final fuel's yield or quality. This project will take the approach of engaging in stability research that addresses seasonal variability in production and that which provides opportunities to add value to algae biomass prior to conversion as well as to gain a fundamental understanding of post-harvest algae physiology to support cultivation gains.

09 BIOMASS FUELS↗
DOE OSTI2023

Simulation of evapotranspiration and yield of maize: An inter-comparison among 41 maize models

Accurate simulation of crop water use (evapotranspiration, ET) can help crop growth models to assess the likely effects of climate change on future crop productivity, as well as being an aid for irrigation scheduling for today's growers. To determine how well maize (Zea mays L.) growth models can simulate ET, an initial inter-comparison study was conducted in 2019 under the umbrella of AgMIP (Agricultural Model Inter-Comparison and Improvement Project). Herein, we present results of a second inter-comparison study of 41 maize models that was conducted using more comprehensive datasets from two additional sites - Mead, Nebraska, USA and Bushland, Texas, USA. There were 20 treatment-years with varying irrigation levels over multiple seasons at both sites. ET was measured using eddy covariance at Mead and using large weighing lysimeters at Bushland. A wide range in ET rates was simulated among the models, yet several generally were able to simulate ET rates adequately. The ensemble median values were generally close to the observations, but a few of the models sometimes performed better than the median. Many of the models that did well at simulating ET for the Mead site did poorly for drier, windy days at the Bushland site, suggesting they need to improve how they handle humidity and wind. Additional variability came from the approaches used to simulate soil water evaporation. Fortunately, several models were identified that did well at simulating soil water evaporation, canopy transpiration, biomass accumulation, and grain yield. These models were older and have been widely used, which suggests that a larger number of users have tested these models over a wider range of conditions leading to their improvement. These revelations of the better approaches are leading to model improvements and more accurate simulations of ET.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Simulation of Mechanical Fractionation of Chopped Whole-Plant Corn (WPC) Using Discrete Element Method (DEM)

Fractionating whole-plant corn (WPC) in a single-pass harvesting system requires studies on the WPC-to-equipment interaction for improved property control, as well as mechanical and air-driven separation processes compared to the traditional multi-pass grain and stover harvesting system. The discrete element method (DEM) technique has the potential to simulate WPC mechanical fractionation and support simulation-based design of WPC separation processes. In this study, methods to develop DEM particle models of WPC (kernel, cob, stalk, and husk) and their material properties for simulating mass fractionation using the ASABE standard mechanical shaker were proposed. Measurement was done on the axial dimensions (major, intermediate, and minor) and mass of each WPC type (mean sample size is 56), sampled from single-pass harvesting. Applying gaussian multivariate regression and bootstrapping re-sampling techniques, a DEM particle approximate to each WPC was developed. Sensitivity analysis of the DEM Young‘s modulus, Poisson‘s ratio, and interaction parameters of coefficient of restitution, coefficient of rolling friction, and coefficient of static friction on mass fraction was performed after 156 ASABE sieve-shaking DEM simulation runs, generated using Latin Hypercube Design (LHD) design of experiment (DOE) from 19 DEM material parameters. DEM simulation using Hertz-Mindlin with flexible bond contact laws and DOE optimized material properties successfully reproduced the mass fractions retained in ASABE sieves at 9.8% mean relative error and a coefficient of determination of R2 = 0.87. Here, the DEM methodology developed for mechanical WPC mass fractionation could be deployed to perform virtual design of feedstock handling equipment and performance analysis of mechanical fraction systems.

09 BIOMASS FUELS↗
NASA NTRS1998

A System for Managing Replenishment of a Nutrient Solution Using an Electrical Conductivity Controller

Control of nutrient solution parameters is very important for the growth and development of plants grown hydroponically. Protocols involving different nutrient solution replenishment times (e.g. one-week, two-week, or two-day replenishment) provide manual periodic control of the nutrient solution's electrical conductivity (EC). Since plants take-up nutrients as they grow, manual control has a drawback in that EC is not held constant between replenishments. In an effort to correct this problem the Center for Food and Environmental Systems for Human Exploration of Space at Tuskegee University has developed a system for managing and controlling levels of EC over a plant's entire growing cycle. A prototype system is being tested on sweetpotato production using the nutrient film technique (NFT), and it is being compared to a system in which sweetpotatoes are grown using NFT with manual control. NASA has played an important role in the development of environmental control systems. They have become a forerunner in growing plants hydroponically with some control systems through the use of networked data acquisition and control using environmental growth chambers. Data acquisition systems which involve the use of real-time, calibration, set points, user panel, and graphical representation programming provide a good method of controlling nutrient solution parameters such as EC and pH [Bledsoe, 19931]. In NASA's Biomass Production Chamber (BPC) at Kennedy Space Center, control is provided by a programmable logic controller (PLC). This is an industrial controller which combines ladder computer logic which has the ability to handle various levels of electrical power. The controller controls temperature, light and other parameters that affect the plant's environment, in the BPC, the Nutrient Delivery System (NIX), a sub-system of the PLC, controls nutrient solution parameters such as EC, pH, and solution levels. When the nutrient EC measurement goes outside a preset range (120-130 mS/m) a set amount of a stock solution of nutrients is automatically added by a metering pump to bring the EC back into operating range [Fortson, 1992]. This paper describes a system developed at Tuskegee University for controlling the EC of a nutrient solution used for growing sweetpotatoes with an EC controller and a computer with LabView data acquisition and instrumentation software. It also describes the preliminary data obtained from the growth of sweetpotatoes using this prototype control system.

Davis, D.↗
DOE OSTI2024

South Asia Group for Energy - Sri Lanka

Sri Lanka set a target of generating 70% of its electricity from renewable energy sources by 2030. This goal includes the addition of 5.8 GW of renewable power capacity, comprising hydropower, solar, wind, and biomass, between 2023 and 2030, with an interim target of adding 2.5 GW of renewable capacity by 2026. To accomplish this, Sri Lanka's power grid needs significant transformation and modernization to handle the integration of variable renewable energy sources effectively. The South Asia Group for Energy (SAGE) is helping Sri Lanka's grid operator, the Ceylon Electricity Board (CEB), understand the gaps for operating the grid with higher renewable share and identifying technology and research requirements to establish a variable renewable energy control center.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗
DOE OSTI2026

Massachusetts and New England SAF Study [Slides]

The Massachusetts Port Authority established a project to assess feedstock availability to produce SAF near 10 New England airports. A techno-economic analysis was conducted to determine renewable fuels and SAF that could be produced from these feedstocks. The resource assessment found municipal solid waste, woody biomass, and food waste were most abundant. The techno-economic analysis found that potential fuel production varied widely based on location, feedstock, and technology production pathway. An assessment of infrastructure readiness to handle SAF was conducted. It was determined that SAF produced outside of New England should be blended in other regions with more capacity and flexibility and delivered to New England as Jet A is today. For SAF produced in New England, there are terminals that have existing infrastructure to receive, blend, and distribute SAF/Jet A blends.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2000

Modeling of Solid Waste Processing Options in BIO-Plex

BIO-Plex is a ground-based test bed currently under development by NASA for testing technologies and practices that may be utilized in future long-term life support missions. All aspects of such an Advanced Life Support (ALS) System must be considered to confidently construct a reliable system, which will not only allow the crew to survive in harsh environments, but allow the crew time to perform meaningful research. Effective handling of solid wastes is a critical aspect of the system, especially when recovery of resources contained in the waste is required. This is particularly important for ALS Systems configurations that include a Biomass Production Chamber. In these cases, significant amounts of inedible biomass waste may be produced, which can ultimately serve as a repository of necessary resources for sustaining life, notably carbon, water, and plant nutrients. Numerous biological and physicochemical solid waste processing options have been considered. Biological options include composting, aerobic digestion, and anaerobic digestion. Physicochemical options include pyrolysis, SCWO (supercritical water oxidation), various incineration configurations, microwave incineration, magnetically assisted gasification, and low temperature plasma reaction. Modeling of these options is a necessary step to assist in the design process. A previously developed top-level model of BIO-Plex implemented in MATLAB Simulink (r) for the use of systems analysis and design has been adopted for this analysis. Presently, this model only considered incineration for solid waste processing. Present work, reported here, includes the expansion of this model to include a wider array of solid waste processing options selected from the above options, bearing in mind potential, near term solid waste treatment systems. Furthermore, a trade study has also been performed among these solid waste processing technologies in an effort to determine the ideal technology for long-term life support missions.

Rodriguez, Luis F.↗
DOE OSTI2023

Biodiesel Handling and Use Guide: Sixth Edition

This document serves as background and a guide for those who blend, distribute, and/or use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel in compression ignition engines, home heating oil systems, boilers, and other applications. This guide is intended to help users, fleets, blenders, distributors, and others understand handling and use of biodiesel and biodiesel blends. Information on the environmental benefits of biodiesel is also provided.

09 BIOMASS FUELS↗
DOE OSTI2023

Physical Properties of Moist, Fermented Corn Kernels

A novel approach to producing corn stover biomass feedstock has been investigated. In this approach, corn grain and stover are co-harvested at moisture contents much less than typical corn silage. The grain and stover are conserved together by anaerobic storage and fermentation and then separated before end use. When separated from the stover, the moist, fermented grain had physical characteristics that differ from typical low-moisture, unfermented grain. A comprehensive study was conducted to quantify the physical properties of this moist, fermented grain. Six corn kernel treatments, either fermented or unfermented, having different moisture contents, were used. Moist, fermented kernels (26 and 36% w.b. moisture content) increased in size during storage. The fermented kernels’ widths and thicknesses were 10% and 15% greater, respectively, and their volume was 28% greater than the dry kernels (15% w.b.). Dry basis particle density was 9% less for moist, fermented kernels. Additionally, the dry basis bulk density was 29% less, and the dry basis hopper-discharged mass flow rate was 36% less. Moist, fermented grain had significantly greater kernel-to-kernel coefficients of friction and angles of repose compared to relatively dry grain. The friction coefficient on four different surfaces was also significantly greater for fermented kernels. Fermented corn kernels had lower individual kernel rupture strengths than unfermented kernels. These physical differences must be considered when designing material handling and processing systems for moist, fermented corn grain.

09 BIOMASS FUELS↗
DOE OSTI2020

Screening of Potential Biomass-Derived Streams as Fuel Blendstocks for Mixing Controlled Compression Ignition Combustion

Mixing controlled compression ignition or diesel engines are highly efficient and are likely to continue to be the primary means for movement of goods for many years to come. Low-carbon biofuels have the potential to significantly reduce the carbon footprint of diesel combustion and could potentially have advantageous properties for combustion such as high cetane number and reduced engine out particle emissions. In this study, we developed a list of potential biomass-derived diesel blendstocks. An online database of properties and characteristics of these bioblendstocks was populated with data. Fuel properties were determined by measurement, model prediction, or literature review. Screening criteria were developed to determine if a bioblendstock met the basic requirements for handling in the diesel distribution system and use as a blend with conventional diesel. Criteria included cetane number =40, flashpoint =52 degrees C, and boiling point or final boiling point <338 degrees C. Blendstocks needed to be soluble in diesel fuel, have a toxicity no worse than conventional diesel, and not be corrosive. Additionally, cloud point or freezing point below 0 degrees C was required. This screening produced a list of 27 potential bioblendstocks. Of these candidates, 13 were available commercially or could be synthesized by biofuels production researchers and included 11 nominally pure components and two mixtures. These 13 candidates were then subjected to further study based on how they impact fuel properties upon blending. Blend properties included cetane number, lubricity, conductivity, oxidation stability and viscosity. Results indicate that all thirteen candidates can meet the basic requirements for diesel fuel blending and are likely to reduce particle emissions from diesel combustion.

09 BIOMASS FUELS↗
DOE OSTI2021

CONVERSION OF COAL WASTES AND MUNICIPAL SOLIDS MIXTURES BY PYROLYSIS TORREFACTION AND ENTRAINED FLOW GASIFICATION

Hundreds of millions of tons of underutilized high-ash, low-energy-density bituminous and anthracite waste coal can be found in the U.S. These stockpiles contribute to water pollution from leaching that is harmful to waterways downstream of the piles. Conventional circulating fluidized combustion power plants use this coal to generate energy but emit toxic trace metals into groundwater (e.g., lead, mercury, arsenic). In addition, refuse-derived fuel (RDF) including municipal solid waste (MSW), biomass, waste plastics, and industrial waste are an enormous and untapped resource that is currently filling landfills or incinerated for low-quality energy with poor emissions. Mainstream Engineering has developed a combined pyrolysis torrefaction entrained flow gasification (PT-EFG) process that utilizes combined waste coal and RDF to create an alternative energy source, increasing energy independence and security and reducing the environmental burden from coal mines and processing facilities. Mainstream’s self-sustaining PT process converts RDF into feedstocks that can be pulverized and handled like conventional coal, enabling combined RDF-waste coal co-feeding into an EFG. The EFG operates at temperatures high enough to slag the ash completely, destroying any residual polycyclic aromatic hydrocarbons (PAHs), converting ash into nonporous vitrified slag or non-leachable ash, and generating high-hydrogen syngas for power generation or liquid fuels. During Phase II, Mainstream successfully demonstrated PT of biomass and MSW into a coal-like feedstock, which was co-gasified with waste coal in an EFG in a combined PT EFG process

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Economic, Greenhouse Gas, and Resource Assessment for Fuel and Protein Production from Microalgae: 2022 Algae Harmonization Update

This report presents an updated "harmonization study" documenting the collaborative analysis of microalgae cultivation and conversion to fuels and products. Four national laboratory modeling teams reconvened to investigate the resource, economic, and environmental sustainability implications of integrated systems encompassing large-scale algae farms and conversion biorefineries. Relative to prior harmonization analyses conducted by these partners, the present effort focuses on more near-term deployment potential based on the use of nutrient-replete, high-protein algal biomass compositions (more readily achievable today without sacrificing cultivation productivity), though this also incurs challenges in lower fuel yields and accordingly higher costs and carbon intensities for the overall integrated systems. Additionally, the present assessment adds further granularity around carbon dioxide (CO 2 ) sourcing and transport via carbon capture of nearby point sources, as well as handling of high-saline cultivation media and resultant blowdown/disposal processing. Finally, this assessment focuses on conversion opportunities to produce both fuel (prioritizing sustainable aviation fuel, in this case via hydrothermal liquefaction) and protein products for the food and feed markets, recognizing growing needs for such products.

09 BIOMASS FUELS↗
DOE OSTI2025

Fluidized Bed Gasification For Conversion of Biomass and Waste Materials to Renewable Hydrogen

This project was undertaken in order to study the potential for hydrogen production, at low cost, from mixtures of biomass and municipal solid waste (MSW). This approach allows for the production of hydrogen with a very low fossil carbon burden, while taking advantage of tipping fees (associated with MSW) to improved process economics. The team sourced three primary feedstocks (wood, MSW, and waste plastics) and characterized them comprehensively using established techniques with a long track record in the field of gasification. All three primary feedstocks were highly reactive and lost most of their mass during initial devolatilization. The production of tars, including heavy tars, was quite high, and was most problematic in the case of the MSW and Waste Plastics feedstocks. Little practical difference was identified between the MSW and Waste Plastics materials, and the addition of bed-forming materials (dolomite and brown alumina) to the feedstocks was found to reduce production of tars during devolatilization under thermogravimetric analysis and/or Fischer Assay conditions. A series of four tests in a lab-scale bubbling-fluidized-bed gasifier, at 50 psig of pressure and about 825 C, confirmed these findings. Pellet feedstocks, broken into fragments, were used for these tests, and pellets comprised of 50% MSW and 50% biomass were found to be the best option in terms of fossil carbon burden, economic potential, and gasification characteristics. Tests were then undertaken in a pilot-scale gasifier facility based on the GTI U-Gas fluidized-bed gasification technology. The feedstock handling train of the 20 TPD U-Gas pilot-scale gasifier located in Des Plaines, IL, was operated under simulated gasification conditions, and the 50/50 pellets were found to be very robust and unproblematic. An improved design for the forward end of the feedstock injection screw of the gasifier was developed and installed. The design approach was based on improved passive cooling of the front-most shroud at the end of the screw, since this approach was found in comprehensive modeling studies to be more than sufficient to accomplish the project objectives associated with this phase of the work, while also avoiding thermal gradients that could have caused heat-stress-induced damage to the refractory around the feedstock inlet if an active cooling approach had been applied. Careful technoeconomic analysis (TEA) of two possible 1000 TPD facilities was carried out. The TEA of conversion of MSW with corn stover in one case, and MSW with woody feedstock in the other case, showed that both had the potential to provide hydrogen at about $1/kg (minimum selling price, 2018 dollar basis). Of the two TEA cases, the one that was based on the conversion of wood in the southeastern USA was found to have slightly better economic potential. The other TEA case was based on a real location in Nebraska and called for corn stover feedstock conversion along with MSW. An underserved communities outreach program plan was developed in cooperation with personnel from the Nebraska Public Power District.

08 HYDROGEN↗
DOE OSTI2021

FCIC DFO--Moisture Management and Optimization in Municipal Solid Waste Feedstock through Mechanical Processing

The project goal is to produce densified product, focusing on characteristics of bulk density, durability, and moisture content, to reduce the cost of preprocessing. The objective of the project is to efficiently manage and handle the properties of MSW feedstock through INL-developed fractional milling, high moisture pelleting, and low temperature drying preprocessing technologies .

09 BIOMASS FUELS↗
DOE OSTI2022

Challenges and Opportunities Associated with the Municipal Solid Waste

Municipal solid waste (MSW) is one of the important challenges in today’s world. A continuous surge in population, increasing living standards, and rapid urbanization are generating an enormous quantity of MSW. Improper management of this MSW often leads to the release of greenhouse gases, emission of particulate matters, and formation of dioxins, which all ultimately contributes to climate change. Recycling these wastes via landfills with gas recovery and/or energy and material production via thermal and chemical conversions could be viable options to manage these challenges. Recycling of MSW is difficult because it is very heterogeneous in nature. The heterogeneity of MSW varies significantly from country to country and from one municipality to another. Such variation depends mainly on the waste management regulations and industrial structure of each region. The quantity and the quality of MSW are critical for determination of the handling and management. This presentation will discuss the statistics (e.g., source, quantity, quality, etc.) of MSW following by the current state-of-the-art technologies for handling those wastes. The key challenges handling those wastes and possible improvements of the handling processes will be discussed further. Finally, the potential opportunities for MSW, especially the contributions to the bio-energy field, will be discussed.

09 BIOMASS FUELS↗
DOE OSTI2024

Economic, Greenhouse Gas, and Resource Assessment for Fuel and Protein Production from Microalgae: 2022 Algae Harmonization Update

This report presents an updated “harmonization study” documenting the collaborative analysis of saline microalgae cultivation and conversion to fuels and products. Four national laboratory modeling teams reconvened to investigate the resource, economic, and environmental sustainability implications of integrated systems encompassing large-scale algae farms and conversion biorefineries. Relative to prior harmonization analyses conducted by these partners, the present effort focuses on more near-term technology potential based on the use of nutrient-replete, high-protein algal biomass compositions (more readily achievable today without sacrificing cultivation productivity) coupled with individual algae farms varying in size but generally smaller at 3,900 acres on average (more realistic in practice than a fixed 5,000-acre farm scale previously considered). Additionally, the present assessment adds further granularity around carbon dioxide (CO 2 ) sourcing and transport via carbon capture of nearby point sources, as well as handling of high-saline cultivation media and resultant blowdown/disposal processing. Finally, this assessment focuses on conversion opportunities to produce both fuel (prioritizing sustainable aviation fuel [SAF], in this case via hydrothermal liquefaction) and protein products for the food and feed markets, recognizing growing needs for such products.

09 BIOMASS FUELS↗
DOE OSTI2023

Rheology of a Wet Waste Feedstock

The current study provides rheological characterization of a representative HTL feedstock, Wet Waste Feedstock # 22 (WW22), as a function of HTL-prototypic temperature and shear rates. Feed WW22 is derived from a regionally representative blend of food, waste water sludges, and FOG (fats, oils, and greases). Rheological characterization of WW22 as a function of temperature provides, in part, key information for development and economic assessment of HTL wet waste slurry handling and heating operations, which may facilitate improved design rigor and optimization of HTL unit operations.

09 BIOMASS FUELS↗
DOE OSTI2020

A Hybrid Pathway to Biojet Fuel via 2,3-Butanediol

Production of biomass-derived sustainable alternative jet fuels (SAJF) has been considered as an important approach to decarbonize the aviation industry but still possesses various challenges in technology advancement, particularly in achieving high carbon efficiency. Here we report a hybrid pathway to SAJF from 2,3-butanediol (2,3-BDO), integrating biologically converting biomass to 2,3-BDO with catalytically upgrading of 2,3-BDO to jet-range hydrocarbons. This pathway is demonstrated to have a high carbon recovery to liquid hydrocarbons from corn stover (25–28%) (74–82% of the theoretical maximum efficiency). The catalytic conversion steps involve 2,3-BDO to C3+ olefins, oligomerization, and hydrogenation where the first two steps are the focus of this study. Under optimum reaction conditions (523 K, 115 kPa, 1.0 h-1 weight hourly space velocity), 2,3-BDO conversion and C3+ olefin selectivity are >97% and 94–98% during 40 h time on stream, respectively. To demonstrate the adaptability of this technology with bio-derived 2,3-BDO, we also investigated the impact of water and other organic coproducts (acetoin and acetic acid) inherited from the fermentation broth on the catalyst performance and product selectivities. We have shown that the catalyst can handle a significant amount of water in the liquid feed (40 wt% water/60 wt% 2,3-BDO) and maintain catalyst stability for ~40 h. Acetoin can be converted to similar C3+ olefins as 2,3-BDO with complete conversion of acetoin. Co-feeding 10 wt% acetoin with 2,3-BDO is found to have no impact on 2,3-BDO conversion, C3+ olefin selectivity, and catalyst stability. The utilization of organic coproduct like acetoin can help to improve overall carbon conversion efficiency when using real biomass-derived 2,3-BDO. On the other hand, the presence of 10 wt% acetic acid is shown to drastically inhibit methyl ethyl ketone (MEK) hydrogenation and butene oligomerization as revealed by the increased MEK and butene selectivities, implying the importance of separating organic acids when feeding bio-derived 2,3-BDO. The formed C3–C6 olefins from 2,3-BDO are further oligomerized over Amberlyst-36 catalyst to longer-chain hydrocarbons with >70 wt% jet-range hydrocarbons including predominantly iso-olefins/iso-paraffins. The overall carbon efficiency for the jet-range hydrocarbons is 19–22%, exceeding most of the reported biojet pathways, which makes it a promising approach for SAJF production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗