Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass productivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

DISCOVR strain pipeline screening – Part II: Winter and summer season areal productivities and biomass compositional shifts in climate-simulation photobioreactor cultures

Assessing the seasonal biomass productivity and compositional shift dynamics under simulated outdoor culture conditions of the top 22 algae strains selected during Tier I flask screening is an important step in the further prioritization of strains with regard to outdoor pond cultivation. These top 22 strains were subjected to Tier II testing in the PNNL Laboratory Environmental Algae Pond Simulator (LEAPS) photobioreactors, simulating light and temperature conditions of 20 cm deep outdoor ponds during the Arizona winter and summer season. All strains were grown in two consecutive nutrient-replete batch culture experiments at their particular optimal medium salinity to quantify their respective seasonal linear-phase areal biomass productivities. To determine biomass compositional shifts in response to nutrient-depletion, the LEAPS cultures were allowed to enter a 9-day nutrient depletion phase at the end of the second batch run. The following strains were evaluated in winter-season climate-simulated cultures and are listed in the order from highest (7.9 g m -2 day -1 ) to lowest (2.3 g m -2 day -1 ) areal N-replete biomass productivity: Monoraphidium minutum 26B-AM, Tetraselmis striata LANL1001, Chlorella vulgaris LRB AZ-1201, Micractinium reisseri NREL14-F2, Monoraphidium sp. MONOR1, Chlorella vulgaris NREL4-C12, Scenedesmus obliquus UTEX393, Scenedesmus acutus LRB-AP-0401, Nannochloropsis oceanica CCAP849/10, and Stichococcus minutus CCALA727. The following strains were evaluated in summer-season climate-simulated cultures and are listed in the order from highest (31.8 g m -2 day -1 ) to lowest (14.2 g m -2 day -1 ) areal N-replete biomass productivity: Picochlorum renovo NREL39-A8, Scenedesmus obliquus UTEX393, Porphyridium cruentum CCMP675, Picochlorum celeri TG2-WT-CSM/EMRE, Chlorella sorokiniana DOE1116, Stichococcus minor CCMP819, Picochlorum oklahomensis CCMP2329, Chlorella sorokiniana DOE1412 (UTEXB3016), Scenedesmus rubescens NREL46B-D3, Picochlorum soloecismus DOE101, Tetraselmis striata LANL1001, Scenedesmus obliquus DOE 0152.z, and Agmenellum quadruplicatum UTEX2268. All LEAPS cultures experienced a significant reduction in areal biomass productivity in response to nutrient-depletion, from 7-16% in the winter season simulation and up to 1-60% in the summer season simulation. Finally, for 10 of the strains tested, the carbohydrate content more than doubled upon nutrient depletion, and for 9 strains, the lipid content increased by over 50% of the initial content.

09 BIOMASS FUELS↗
NASA NTRS2003

Demonstration of a Porous Tube Hydroponic System to Control Plant Moisture and Growth

Accurate remote detection of plant health indicators such as moisture, plant pigment concentrations, photosynthetic flux, and other biochemicals in canopies is a major goal in plant research. Influencing factors include complex interactions between wavelength dependent absorbing and scattering features from backgrounds as well as canopy biochemical and biophysical constituents. Accurately controlling these factors in outdoor field studies is difficult. Early testing of a porous tube plant culture system has indicated that plant biomass production, biomass partitioning, and leaf moisture of plants can be controlled by precisely managing the root water potential. Managing nutrient solution chemistry can also control plant pigments, biochemical concentrations, plant biomass production, and photosynthetic rates. A test bed was developed which utilized the porous tube technology with the intent of evaluating remote sensing systems, spectral analyses procedures, gas-exchange, and fluorescence measurements for their ability to detect small differences in plant water status. Spectral analysis was able to detect small differences in the mean leaf water content between the treatments. However these small differences were not detectable in the gas-exchange or fluorescence measurements.

Dreschel, T. W.↗
DOE OSTI2025

Ground-Active Arthropod Diversity Under Energycane and Biomass Sorghum Production

Energycane and biomass sorghum are two of the most promising cellulosic energy crops in the southeastern US. Research on these two energy crops has focused mainly on biomass production, and there is a lack of knowledge on their ability to promote biodiversity and ecosystem services. This paper presents results from a comprehensive study on ground-active arthropod diversity in seven sites across five states in the southeastern US (Florida, Georgia, Louisiana, Mississippi, and Texas). Pitfall traps were deployed four times during each crop season for energycane, biomass sorghum, and a local reference conventional crop from 2020 to 2022. Arthropod abundance (individuals/(trap × day)) values were 4.9 ± 0.46, 3.7 ± 0.18, and 2.6 ± 0.16 (mean ± stderr) for conventional crops, biomass sorghum, and energycane, respectively, with a significant difference found only between conventional crops and energycane. Individuals were identified to arthropod orders, and Hill’s diversity indices were calculated based on the number of individuals in each arthropod order instead of the number of individuals in each arthropod species. Order-based arthropod richness values were 5.3, 5.2, and 4.8 for biomass sorghum, conventional crops, and energycane, with significant difference found only between biomass sorghum and energycane. There was no significant difference in the order-based Shannon diversity and Simpson diversity between the three crop types. The effective number of arthropod orders for the two energy crops decreased from 5.0 to 3.4 to 2.9 with increasing order of diversity from arthropod richness to Shannon diversity to Simpson diversity. The explained variability by environmental factors also decreased with increasing Hill’s order of diversity. The results from this study indicate no significant advantage in order-based arthropod diversity in growing biomass sorghum and energycane. This research fills a critical knowledge gap in understanding the impacts of cellulosic energy crop production on biodiversity and ecosystem services.

Yang, Yubin↗
DOE OSTI2020

Algae-Based Beneficial Re-use of Carbon Emissions Using a Novel Photobioreactor: a Techno-Economic and Life Cycle Analysis

Despite the many advantages of microalgae, the feasibility of large-scale cultivation requires significant amounts of carbon dioxide (CO 2 ) to enable high growth rates. A synergistic union typically proposed for the supply of CO 2 is the coupling of algal cultivation with emissions from power plants. This study investigates the sustainability of a novel microalgae platform coupled with coal-based flue gas. The proposed system consists of a novel photobioreactor (PBR) for the production of biomass followed by a two-stage dewatering process. Here, a systems model, which quantifies the CO 2 and energy consumption of the proposed system, was developed and the minimum biomass selling price (MBSP) was determined by a techno-economic analysis (TEA). TEA results indicate that a facility with the capacity to capture 30% of the emissions from a 1 MW power plant requires a biomass production of 1280 metric tonnes per year, which when scaled to a nth of kind facility, can produce biomass at a MBSP of $2322 per tonne. The environmental impact of the proposed facility was determined by a life cycle assessment methodology and results indicate a carbon capture potential of 1.16 x 10 4 metric tons of CO 2 equivalent. In addition, an energy analysis indicates a desirable net energy ratio of 0.1, which is lower than conventional PBRs. Discussion focuses on the requirements to reduce biomass production cost, including research investment areas for increasing productivity while decreasing energy requirements.

09 BIOMASS FUELS↗
DOE OSTI2022

Methods of recovering lignin and other products from biomass

Methods of recovering lignin products and other products from biomass. The method comprises adding a chemical agent to a stored biomass comprising lignin to form a chemically-treated biomass. The chemical agent comprises an acid, a base, an inorganic salt, or a combination of the inorganic salt and one of the acid or the base. The chemically-treated biomass is stored under anaerobic conditions. Lignin products, such as high molecular weight lignin, medium molecular weight lignin, or low molecular weight lignin, are recovered from the chemically-treated biomass. Additional methods of recovering lignin products and other products from biomass are disclosed.

09 BIOMASS FUELS↗
DOE OSTI2024

A comprehensive strategy for stable, high productivity cultivation of microalgae with controllable biomass composition

This project was performed primarily as a partnership between three Universities – The University of Toledo (UToledo), Montana State University (MSU) and The University of North Carolina at Chapel Hill (UNC). North Carolina State University also contributed to the project through a sub-subcontract. The project developed fundamental and applied knowhow for cultivation systems that are not restricted by (i) proximate availability of flue gas or other high concentration CO 2 sources and (ii) the energy and infrastructure burden to deliver CO 2 over long distances. To overcome these constraints, this project focused on cultivation of alkaliphilic algal cultures in high pH, high alkalinity media (pH>10, alkalinity >100mEq) and demonstrated high biomass productivity, improvement of biomass composition for fuel production, and culture stability. The high media alkalinity ensured availability of sufficient HCO 3 - in solution for high rates of carbon fixation while the high pH of the media facilitated rapid scavenging of atmospheric CO 2 . Overall, the direct air capture rates (DAC) in our system were sufficient to achieve high biomass productivities using atmospheric CO 2 alone. The project also developed and validated toolkits related to metabolic flux modeling and microbiome characterization.

09 BIOMASS FUELS↗
DOE OSTI2021

Long-term variability of root production in bioenergy crops from ingrowth core measurements

Long-term determination of root biomass production upon land-use conversion to biofuel crops is rare. To assess land-use legacy influences on belowground biomass accumulation, we converted 22-year-old Conservation Reserve Program (CRP) grasslands and 50+-year-old agricultural (AGR) lands to corn (C), switchgrass (Sw) and restored prairie (Pr) biofuel crops. We maintained one CRP grassland as a reference (Ref). We hypothesized that land-use history and crop type have significant effects on root density, with perennial crops on CRP grasslands having a higher root biomass productivity, while corn grown on former agricultural lands produce the lowest root biomass. Methods The ingrowth core method was used to determine in situ ingrowth root biomass, alongside measurements of aboveground net primary productivity (ANPP). Ancillary measurements, including air temperature, growing season length and precipitation were used to examine their influences on root biomass production. Important Findings Root biomass productivity was the highest in unconverted CRP grassland (1716 g m-2 yr-1) and lowest in corn fields (526 g m-2 yr-1). All perennial sites converted from CRP and AGR lands had lower root biomass and ANPP in the first year of planting but peaked in 2011 for switchgrass and a year later for restored prairies. Ecosystem stability was higher in restored prairies (AGR-Pr: 4.3 ± 0.11; CRP-Pr: 4.1 ± 0.10), with all monocultures exhibiting a lower stability. Root biomass production was positively related to ANPP (R2 = 0.40). Overall, attention should be given to root biomass accumulation in large-scale biofuel production as it is a major source of carbon sequestration.

Environmental Sciences & Ecology↗
DOE OSTI2021

Dissecting the metabolic reprogramming of maize root under nitrogen-deficient stress conditions

The growth and development of maize (Zea mays L.) largely depends on its nutrient uptake through the root. Hence, studying its growth, response, and associated metabolic reprogramming to stress conditions is becoming an important research direction. A genome-scale metabolic model (GSM) for the maize root was developed to study its metabolic reprogramming under nitrogen stress conditions. The model was reconstructed based on the available information from KEGG, UniProt, and MaizeCyc. Transcriptomics data derived from the roots of hydroponically grown maize plants were used to incorporate regulatory constraints in the model and simulate nitrogen-non-limiting (N+) and nitrogen-deficient (N-) condition. Model-predicted flux-sum variability analysis achieved 70% accuracy compared with the experimental change of metabolite levels. In addition to predicting important metabolic reprogramming in central carbon, fatty acid, amino acid, and other secondary metabolism, maize root GSM predicted several metabolites (l-methionine, l-asparagine, l-lysine, cholesterol, and l-pipecolate) playing a regulatory role in the root biomass growth. Furthermore, this study revealed eight phosphatidylcholine and phosphatidylglycerol metabolites which, even though not coupled with biomass production, played a key role in the increased biomass production under N-deficient conditions. Overall, the omics-integrated GSM provides a promising tool to facilitate stress condition analysis for maize root and engineer better stress-tolerant maize genotypes.

Plant Sciences↗
DOE OSTI2023

Data for Intron-Mediated Enhancement of DIACYLGLYCEROL ACYLTRANSFERASE1 Expression in Energycane Promotes a Step Change for Lipid Accumulation in Vegetative Tissues

Metabolic engineering for hyperaccumulation of lipids in vegetative tissues is a novel strategy for enhancing energy density and biofuel production from biomass crops. Energycane is a prime feedstock for this approach due to its high biomass production and resilience under marginal conditions. DIACYLGLYCEROL ACYLTRANSFERASE ( DGAT ) catalyzes the last and only committed step in the biosynthesis of triacylglycerol (TAG) and can be a rate-limiting enzyme for the production of TAG. In this study, we explored the effect of intron-mediated enhancement (IME) on the expression of DGAT1 and resulting accumulation of TAG and total fatty acid (TFA) in leaf and stem tissues of energycane. To maximize lipid accumulation these evaluations were carried out by co-expressing the lipogenic transcription factor WRINKLED1 ( WRI1 ) and the TAG protect factor oleosin ( OLE1 ). Including an intron in the codon-optimized TmDGAT1 elevated the accumulation of its transcript in leaves by seven times on average based on 5 transgenic lines for each construct. Plants with WRI1 (W), DGAT1 with intron (Di), and OLE1 (O) expression (WDiO) accumulated TAG up to a 3.85% of leaf dry weight (DW), a 192-fold increase compared to non-modified energycane (WT) and a 3.8-fold increase compared to the highest accumulation under the intron-less gene combination (WDO). This corresponded to TFA accumulation of up to 8.4% of leaf dry weight, a 2.8-fold or 6.1-fold increase compared to WDO or WT, respectively. Co-expression of WDiO resulted in stem accumulations of TAG up to 1.14% of DW or TFA up to 2.08% of DW that exceeded WT by 57-fold or 12-fold and WDO more than twofold, respectively. Constitutive expression of these lipogenic “push pull and protect” factors correlated with biomass reduction. Intron-mediated enhancement (IME) of the expression of DGAT resulted in a step change in lipid accumulation of energycane and confirmed that under our experimental conditions it is rate limiting for lipid accumulation. IME should be applied to other lipogenic factors and metabolic engineering strategies. The findings from this study may be valuable in developing a high biomass feedstock for commercial production of lipids and advanced biofuels.

Feedstock Production↗
DOE OSTI2023

Intron-mediated enhancement of DIACYLGLYCEROL ACYLTRANSFERASE1 expression in energycane promotes a step change for lipid accumulation in vegetative tissues

Abstract Background Metabolic engineering for hyperaccumulation of lipids in vegetative tissues is a novel strategy for enhancing energy density and biofuel production from biomass crops. Energycane is a prime feedstock for this approach due to its high biomass production and resilience under marginal conditions. DIACYLGLYCEROL ACYLTRANSFERASE ( DGAT ) catalyzes the last and only committed step in the biosynthesis of triacylglycerol (TAG) and can be a rate-limiting enzyme for the production of TAG. Results In this study, we explored the effect of intron-mediated enhancement (IME) on the expression of DGAT 1 and resulting accumulation of TAG and total fatty acid (TFA) in leaf and stem tissues of energycane. To maximize lipid accumulation these evaluations were carried out by co-expressing the lipogenic transcription factor WRINKLED 1 ( WRI 1) and the TAG protect factor oleosin ( OLE 1). Including an intron in the codon-optimized TmDGAT 1 elevated the accumulation of its transcript in leaves by seven times on average based on 5 transgenic lines for each construct. Plants with WRI 1 (W), DGAT 1 with intron (Di), and OLE 1 (O) expression (WDiO) accumulated TAG up to a 3.85% of leaf dry weight (DW), a 192-fold increase compared to non-modified energycane (WT) and a 3.8-fold increase compared to the highest accumulation under the intron-less gene combination (WDO). This corresponded to TFA accumulation of up to 8.4% of leaf dry weight, a 2.8-fold or 6.1-fold increase compared to WDO or WT, respectively. Co-expression of WDiO resulted in stem accumulations of TAG up to 1.14% of DW or TFA up to 2.08% of DW that exceeded WT by 57-fold or 12-fold and WDO more than twofold, respectively. Constitutive expression of these lipogenic “push pull and protect” factors correlated with biomass reduction. Conclusions Intron-mediated enhancement (IME) of the expression of DGAT resulted in a step change in lipid accumulation of energycane and confirmed that under our experimental conditions it is rate limiting for lipid accumulation. IME should be applied to other lipogenic factors and metabolic engineering strategies. The findings from this study may be valuable in developing a high biomass feedstock for commercial production of lipids and advanced biofuels. Graphical abstract

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Constraining long‐term model predictions for woody growth using tropical tree rings

The strength and persistence of the tropical carbon sink hinges on the long-term responses of woody growth to climatic variations and increasing CO 2 . However, the sensitivity of tropical woody growth to these environmental changes is poorly understood, leading to large uncertainties in growth predictions. Here, we used tree ring records from a Southeast Asian tropical forest to constrain ED2.2-hydro, a terrestrial biosphere model with explicit vegetation demography. Specifically, we assessed individual-level woody growth responses to historical climate variability and increases in atmospheric CO 2 (C a ). When forced with historical C a , ED2.2-hydro reproduced the magnitude of increases in intercellular CO 2 concentration (a major determinant of photosynthesis) estimated from tree ring carbon isotope records. In contrast, simulated growth trends were considerably larger than those obtained from tree rings, suggesting that woody biomass production efficiency (WBPE = woody biomass production:gross primary productivity) was overestimated by the model. The estimated WBPE decline under increasing C a based on model-data discrepancy was comparable to or stronger than (depending on tree species and size) the observed WBPE changes from a multi-year mature-forest CO 2 fertilization experiment. In addition, we found that ED2.2-hydro generally overestimated climatic sensitivity of woody growth, especially for late-successional plant functional types. The model-data discrepancy in growth sensitivity to climate was likely caused by underestimating WBPE in hot and dry years due to commonly used model assumptions on carbon use efficiency and allocation. To our knowledge, this is the first study to constrain model predictions of individual tree-level growth sensitivity to C a and climate against tropical tree-ring data. Our results suggest that improving model processes related to WBPE is crucial to obtain better predictions of tropical forest responses to droughts and increasing C a . Finally, more accurate parameterization of WBPE will likely reduce the stimulation of woody growth by C a rise predicted by biosphere models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Measuring Biomass-Derived Products in Biological Conversion and Metabolic Process

Biomass can be converted to various types of products in biological and metabolic processes. For an in-depth understanding of biomass conversion, quantitative and qualitative information of products in these conversion processes are essential. Here we introduce analytical techniques including high-performance liquid chromatography (HPLC), gas chromatography (GC), gas chromatography-mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR) for biomass-based products characterization in biological and metabolic processes.

Yoo, Chang Geun↗
NASA NTRS1983

Remote sensing investigations of wetland biomass and productivity for global biosystems research

Monitoring biomass of wetlands ecosystems can provide information on net primary production and on the chemical and physical status of wetland soils relative to anaerobic microbial transformation of key elements. Multispectral remote sensing techniques successfully estimated macrophytic biomass in wetlands systems. Regression models developed from ground spectral data for predicting Spartina alterniflora biomass over an entire growing season include seasonal variations in biomass density and illumination intensity. An independent set of biomass and spectral data were collected and the standing crop biomass and net primary productivity were estimated. The improved spatial, radiometric and spectral resolution of th LANDSAT-4 Thematic Mapper over the LANDSAT MSS can greatly enhance multispectral techniques for estimating wetlands biomass over large areas. These techniques can provide the biomass data necessary for global ecology studies.

Harkisky, M.↗
DOE OSTI2021

Techno-Economic Assessment for Opportunities to Integrate Algae Farming with Wastewater Treatment

This report investigates the economic and scalability potential for algal biomass production based on opportunities to couple algae farming with wastewater treatment (WWT). This activity was motivated in part by a recent influx of technology developers who are currently in various stages of planning, construction, and operation of algae facilities for treating municipal wastewater, all making claims of tremendous economic potential for algal WWT relative to other more traditional WWT methods when viewing treated wastewater as the primary product output and algal biomass as a secondary coproduct. In addition to solving for minimum biomass selling price (MBSP) for a farm configured to maximize biomass production while minimizing water footprint (when sourcing makeup water from local groundwater resources at added cost), the algal WWT cases evaluated here also solved for MBSP while assigning a treatment credit as a means to valorize the treated water as a coproduct in the farm model. This enables a consistent comparison against the National Renewable Energy Laboratory’s standard algae farm models.

09 BIOMASS FUELS↗
DOE OSTI2021

UAV-based multispectral time-series imagery of biomass sorghum - 2019

UAV-based high-resolution multispectral time-series orthophotos utilized to understand the relation between growth dynamics, imagery temporal resolution, and end-of-season biomass productivity of biomass sorghum as bioenergy crop. Sensor utilized is a RedEdge Micasense flown at 40 meters above ground level at the Energy Farm- UIUC in 2019.

Bioenergy crops↗
DOE OSTI2020

Anaerobic Storage and Conversion of Microalgal Biomass to Manage Seasonal Variation in Cultivation

Seasonal variation in microalgal biomass production is a well-known challenge when optimizing economics for algal fuel conversion, especially given the fluctuation in biomass production between winter and summer. Wet storage offers significant potential for cost and energy savings compared to dewatering and dry storage. This study demonstrates the feasibility of preserving harvested Scenedesmus acutus biomass through wet anaerobic storage for use in biochemical conversion. Anaerobic storage effectively preserved biomass with minimal degradation of carbohydrates and preservation of lipids and proteins. Screening experiments identified optimal pretreatment conditions for stored biomass. Scale-up of pretreatment enabled fermentation of the hydrolysate to butyric acid and indicated no observable difference in conversion between unstored and stored biomass. Lipid extraction improved by a relative 12% for stored biomass. These results suggest that wet anaerobic storage can effectively manage seasonal variation in biomass production and is compatible with biochemical approaches for biofuel production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Evaluating Basin-Scale Forest Adaptation Scenarios: Wildfire, Streamflow, Biomass, and Economic Recovery Synergies and Trade-Offs

Active forest management is applied in many parts of the western United States to reduce wildfire severity, mitigate vulnerability to drought and bark beetle mortality, and more recently, to increase snow retention and late-season streamflow. A rapidly warming climate accelerates the need for these restorative treatments, but the treatment priority among forest patches varies considerably. We simulated four treatment scenarios across the 3,450 km 2 Wenatchee River basin in eastern Washington, United States. We used a decision support tool (DST) to assess trade-offs and synergies within and among treatments on wildfire risk and smoke emissions, water yield and snow retention, biomass production, and economic return. Treatment scenarios emphasized prescribed burning ( BurnOnly ), biomass production ( MaxBiomass ), gap-based thinning to optimize water yield ( IdealWater ), and a principle-based restoration scenario ( RA1 ). Fire hazard, smoke emissions, and biomass production metrics were evaluated across scenarios using the Forest Vegetation Simulator, and water yields were modeled using the Distributed Hydrology Soil Vegetation Model. Simulations were summarized to both patch- (10 1 –10 2 ha) and subwatershed- (10 3 –10 4 ha) scales, and treatment effects were evaluated against an untreated baseline landscape. We used logic models to rank effect sizes by scenario across metrics along a continuum between −1 (no or weak effect) to +1 (large effect). All treatments produced benefits across one or more ecosystem services and led to synergistic benefits to water yield and wildfire hazard reduction. Tradeoffs among resource benefits were clear in wilderness where reliance on prescribed burning without mechanical treatment increased costs and eliminated the potential for biomass recovery. The BurnOnly scenario improved fire risk metrics and streamflow, but effect sizes were lower compared to other treatments. IdealWater showed the strongest benefits overall, demonstrating the ability to capture multiple resource benefits through spatially explicit thinning. Our study provides a framework for integrating strategic and tactical models that evaluate tradeoffs and synergies gained through varied management approaches. We demonstrate the utility of decision support modeling to enhance management synergies across large landscapes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Selective and Efficient Production of Biomass-Derived Vinylfurans

We describe a two-step catalytic process for the selective and rapid conversion of biomass-derived acetylfurans into vinylfurans. This is accomplished by nearly quantitatively reducing acetylfurans into furyl alcohols using a copper chromite catalyst and exploiting the promoter-like properties of ethanol, the solvent. Subsequently, furyl alcohol is dehydrated using solid-acid catalysts. Catalyst deactivation due to oligomeric species is a major issue, but the activity can be partially recovered by calcination. Optimization of reaction conditions showed that the selectivity could be increased by using nitrobenzene, a polar aprotic solvent. Here, the high-boiling point solvent allows the formation of vinylfurans with a selectivity of up to 85%; the product can be isolated in high purity by distillation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗