Search NASA⌕ Search

SEARCH · Search NASA

Results for “blunt body”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Hypersonic blunt body computations including real gas effects

The recently developed second-order explicit and implicit total variation diminishing (TVD) shock-capturing methods of the Harten and Yee, Yee, and van Leer types in conjunction with a generalized Roe's approximate Riemann solver of Vinokur and the generalized flux-vector splittings of Vinokur and Montagne for two-dimensional hypersonic real gas flows are studied. A previous study on one-dimensional unsteady problems indicated that these schemes produce good shock-capturing capability and that the state equation does not have a large effect on the general behavior of these methods for a wide range of flow conditions for equilibrium air. The objective of this paper is to investigate the applicability and shock resolution of these schemes for two-dimensional steady-state hypersonic blunt body flows. The main contribution of this paper is to identify some of the elements and parameters which can affect the convergence rate for high Mach numbers or real gases but have negligible effect for low Mach number cases for steady-state inviscid blunt body flows.

Montagne, J.-L.↗
NASA NTRS1993

Flow resolution and domain of influence in rarefied hypersonic blunt-body flows

The study assesses the effects of the upstream domain size and grid resolution upon flow properties and body aerodynamics computed for rarefied flows over cold blunt bodies with a direct simulation Monte Carlo (DSMC) particle method. Empirical correlations are suggested for aerodynamic coefficients for two-dimensional flows past a perpendicular flat plate. Free-stream parameters which were varied in the study include the Mach number, Knudsen number, surface temperature, and intermolecular potential. Insufficient grid resolution leads to overprediction of aerodynamic heating and forces in the DSMC method. Solution accuracy correlates well with the Reynolds number defined at the wall temperature and the stagnation mean free path relative to the cell dimension. Insufficient upstream domain size in the DSMC method leads to overprediction of heating and drag. Errors in aerodynamic coefficients correlate well with the distance ahead of the body where flow temperature reaches half of its peak value. Simulation of a hard-sphere gas is more sensitive to grid resolution, while simulation of a Maxwell gas is more sensitive to upstream domain size.

Haas, Brian L.↗
NASA NTRS2015

Transition Experiments on Blunt Bodies with Distributed Roughness in Hypersonic Free Flight in Carbon Dioxide

Blunt-body geometries were flown through carbon dioxide in the NASA Ames Hypervelocity Free Flight Aerodynamic Facility to investigate the influence of distributed surface roughness on transition to turbulence in CO2-dominated atmospheres, such as those of Mars and Venus. Tests were also performed in air for direct comparison with archival results. Models of hemispherical and spherically-blunted large-angle conical geometries were flown at speeds between 2.8 km/s and 5.1 km/s and freestream pressures between 50 Torr and 228 Torr. Transition fronts were determined from global surface heat flux distributions measured using thermal imaging techniques. Distributed surface roughness was produced by grit-blasting the model surfaces. Real-gas Navier-Stokes solutions were used to calculate non-dimensional correlating parameters at the measured transition onset locations. Transition-onset locations correlated well with a constant roughness Reynolds number based on the mean roughness element height. The critical roughness Reynolds number for transition onset determined for flight in CO2 was 223 +/- 25%. This mean value is lower than the critical value of 250 +/- 20% previously-established from tests conducted in air, but within the bounds of the expected measurement uncertainty.

ballistic ranges↗
NASA NTRS1974

Numerical computation of two dimensional viscous blunt body flows with an impinging shock, part 2

Two-dimensional viscous blunt body flows with an impinging shock have been computed using a time-dependent finite-difference method which solves the complete set of Navier-Stokes equations for a compressible flow. For low Reynolds number flows, the entire flow field, including the bow shock and impinging shock, has been captured in the computation. For higher Reynolds number flows, the bow shock is treated as a discontinuity across which the Rankine-Hugoniot equations are applied, while the boundary layer and interaction regions are captured as before. Using this latter shock-fitting approach, a Type III shock interaction flow field has been computed with flow conditions corresponding to the space shuttle orbiter freestream conditions at 61 km (200,000 ft).

Holst, T. L.↗
NASA NTRS1989

Transpiration cooling of hypersonic blunt bodies with finite rate surface reactions

The convective heat flux blockage to blunt body and hypersonic vehicles by transpiration cooling are presented. The general problem of mass addition to laminar boundary layers is reviewed. Results of similarity analysis of the boundary layer problem are provided for surface heat flux with transpiration cooling. Detailed non-similar results are presented from the numerical program, BLIMPK. Comparisons are made with the similarity theory. The effects of surface catalysis are investigated.

Henline, William D.↗
NASA NTRSDate not supplied

Forced Displacement Technique for Measuring Blunt Body Aerodynamics in a Magnetic Suspension Wind Tunnel

The Old Dominion University/NASA Langley 6-Inch Magnetic Suspension Wind Tunnel has developed the ability to levitate blunt bodies which can oscillate freely about the yaw axis. This allows for the measurement of static and dynamic stability coefficients without sting interference. The magneic suspension controller introduces other translational forces which affect the vehicle dynamics complicating data reduction. Exciting model oscillations in a reliable way has also been a challenge. A new test method has been developed that produces capsule oscillations from forced oscillatory translational motion at the resonant yaw oscillatory frequency of the capsule. After oscillations are excited, the translational forcing motion is suspended to record free oscillation behavior as well. A data reduction method whereby a linear model of the translational and oscillatory motion is used to fit to the measured data and solve for aerodynamic coefficients has also been developed. The work presented shows that the new data reduction

blunt body↗
NASA NTRSDate not supplied

Forced Displacement Technique for Measuring Blunt Body Aerodynamics in a Magnetic Suspension Wind Tunnel

The Old Dominion University/NASA Langley 6-Inch Magnetic Suspension Wind Tunnel has developed the ability to levitate blunt bodies which can oscillate freely about the yaw axis. This allows for the measurement of static and dynamic stability coefficients without sting interference. The magneic suspension controller introduces other translational forces which affect the vehicle dynamics complicating data reduction. Exciting model oscillations in a reliable way has also been a challenge. A new test method has been developed that produces capsule oscillations from forced oscillatory translational motion at the resonant yaw oscillatory frequency of the capsule. After oscillations are excited, the translational forcing motion is suspended to record free oscillation behavior as well. A data reduction method whereby a linear model of the translational and oscillatory motion is used to fit to the measured data and solve for aerodynamic coefficients has also been developed. The work presented shows that the new data reduction

blunt body↗