SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Post-synthetic ligand modification to generate chiral CsPbBr 3 NPs.
Not provided.
Cu(In,Ga)Se 2 samples were fabricated using a 3-stage thermal co-evaporation process on molybdenum back contact at low temperature. The process of recrystallization was carried out in between the 2 nd and 3 rd stages by flashing 25 mg of AgBr for 2 minutes. A change in morphological structure was observed as small grains transformed into large grains, as confirmed by XRD and SEM measurements. The decrease of the Ga gradient, seen in the SIMS depth profile, suggests Ga interdiffusion due to AgBr treatment. Altogether, the AgBr treatment contributes to a general improvement in device performance as compared to the as-deposited devices.
Secondary electrochemical battery has been developed which has high energy/ weight density. Battery is rechargeable and works on reaction between hydrogen and bromine.
Radiofrequency sputtered coatings of CRB2, MOSI2, and MOS2 were examined by X-ray photoelectron spectroscopy. The effects of sputtering target history, deposition time, RF power level, and substrate bias on film composition were studied. Friction tests were run on RF sputtered surfaces of 440-C steel to correlate XPS data with lubricating properties. Significant deviations from stoichiometry and high oxide levels for all three compounds were related to target outgassing. The effect of biasing on these two factors depended on the compound. Improved stoichiometry correlated well with good friction and wear properties.
A computer model of a LiBr-H2O single-stage absorption machine was developed. The model, utilizing a given set of design data such as water-flow rates and inlet or outlet temperatures of these flow rates but without knowing the interior characteristics of the machine (heat transfer rates and surface areas), can be used to predict or simulate off-design performance. Results from 130 off-design cases for a given commercial machine agree with the published data within 2 percent.
Explore the source record for details and available documents.
The nascent quantum state distributions of CN(X2 Sigma +) fragments produced in the dissociation of ClCN and BrCN by photolysis at 193 nm, in an effusive beam, have been measured. The rotational distribution of the fragments is highly excited. The results show that the excited electronic state which dissociates is bent. A simple parameterization is shown to fit the results. This parameterization is based on a semiclassical model which has dynamical implications.
Explore the source record for details and available documents.
Aircraft profiles of O3 concentrations over the Arctic ice pack in spring exhibit a depletion of O3 beneath the surface temperature inversion. One such profile from the NOAA WP-3D Arctic Gas and Aerosol Sampling Program (AGASP) flights in April, 1986 north of Alert, NWT (YLT, 82.5 N) is shown. The gradient of O3 across the temperature inversion, which is essentially a step function from tropospheric values (35 to 40 ppbv) to 0, is somewhat masked by a 1-min running mean applied to the data. Evidence is presented that O3 destruction beneath the Arctic temperature inversion is the result of a photochemical reaction between gaseous Br compounds and O3 to produce particulate Br aerosol. It is noted that in springtime, O3 at the Alert Baseline Station regularly decreases from 30 to 40 ppbv to near 0 over the period of a few hours to a day. At the same time, there is a production of particulate Br with a near 1.0 anti-correlation to O3 concentration. Surface concentrations of bromoform in the Arctic exhibit a rapid decrease following polar sunrise. AGASP aircraft measurements of filterable bromine particulates in the Arctic (March-April, 1983 and 1986) are shown. The greatest concentrations of Br aerosol (shown as enrichment factors relative to to Na in seawater, EFBR (Na)) were observed in samples collected beneath the surface temperature inversion over ice. Samples collected at the same altitude over open ocean (off Spitzbergen) labeled Marine did not exhibit similar Br enrichments. A second region of particulate Br enrichment was observed in the lower stratosphere, which regularly descends to below 500 mb (5.5 km) in the high Arctic. The NOAA WP-3D flew in the stratosphere on all AGASP flights and occasionally measured O3 concentrations in excess of 300 ppbv.
Heat capacities of twelve different Lithium/BCX (BrCl in thionyl chloride) batteries in sizes AA, C, D, and DD were determined. Procedures and measurement results are reported. The procedure allowed simple, reproducible, and precise determinations of heat capacities of industrially important Lithium/BCX cells, without interfering with performance of the cells. Use of aluminum standards allowed the accuracy of the measurements to be maintained. The measured heat capacities were within 5 percent of calculated heat capacity values.
Measurements are presented of the quantum detection efficiency (QDE) of three samples of RbBr photocathode layers over the 44-150-A wavelength range. The QDE of RbBr-coated microchannel plate (MCP) was measured using a back-to-back Z-stack MCP configuration in a detector with a wedge and strip position-sensitive anode, of the type described by Siegmund et al. (1984). To assess the stability of RbBr layer, the RbBr photocathode was exposed to air at about 30 percent humidity for 20 hr. It was found that the QDE values for the aged cathode were within the QDE measurement errors of the original values. A simple QDE model was developed, and it was found that its predictions are in accord with the QDE measurements.
A decadal time series of global CH3Br concentrations in the earth's atmosphere is presented. It is shown that average concentrations are about 10 pptv and during the last 4 yr may be increasing at 0.3 +/- 0.1 pptv/yr. It is estimated that the atmospheric lifetime of CH3Br that is due to reaction with OH is about 2 yr, which results in a calculated global emission rate of about 100 Gg/yr. Ocean supersaturations of 140-180 percent are observed, and atmospheric concentrations over the open oceans are higher than at comparably located coastal sites. The ocean source is estimated to be about 35 Gg/yr. The remaining emissions must come from other natural sources and anthropogenic activities.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Phosphonium-based (R-P(R’) 3 + ) metal halide semiconductors (MHS) emerged recently as a promising family of materials offering enhanced water and thermal stability over conventional ammonium-based (R-NH 3 + ) MHS. Despite this performance, there is a lack of systematic studies that elucidate the origin of these features as well as the underlying optoelectronic properties. Here, we report here the synthesis of nine new 1D materials (L)PbX 3 (L= C4-P, C6-P, C6-N, P3-P, P4-P, X= I, Br), using custom made organic ligands, namely butyl(triethyl)phosphonium bromide (C4-P), hexyl(triethyl)phosphonium bromide (C6-P), benzyl(triethyl)phosphonium bromide (P3-P), benzyl(trimethyl)phosphonium bromide (P4-P), and hexyl(triethyl)ammonium bromide (C6-N). Most of the materials are water stable for over 21 months, while the assembly of the isostructural (C6-N)PbBr 3 and (C6-P)PbBr 3 allowed us to directly identify the impact of a single atom (phosphorus versus nitrogen), on water stability. Notably, the C6-P analog remains water stable for 21 months, whereas the C6-N analog dissolves in water. It was found that neither crystal packing nor the lack of hydrogen bond interactions with water is responsible for this record stability performance, challenging currently established claims on the 1 origin of water stability in MHS. All materials feature broad light emission at RT, with (P3-P)PbBr 3 exhibiting a PLQY of 22.0% ascribed to permanent traps, while electrochemical studies uncovered for the first time the redox properties and their strong potential for the sensing of per- and polyfluoroalkyl substances (PFAS) in water samples. Our work showcases the potential of these compounds for applications where thermal and water stability are interwoven, potentially rendering their (R-NH 3 + ) based counterparts obsolete.
Cesium cerium bromide (Cs2CeBr5) and potassium cerium bromide (K2CeBr5) are new scintillator materials for X-ray and gamma ray detector applications. Recently halide scintillator materials, such as Ce doped lanthanum bromide has been proved to be very important material for the same purpose. These materials are highly hygroscopic; a search for high light yield non-hygroscopic materials was highly desirable to advance the scintillator technology. In this paper, we are reporting the crystal growth of novel scintillator materials, cesium cerium bromide (Cs2CeBr5) and potassium cerium bromide (K2CeBr5). Crystals were successfully grown from the melt using the vertical Bridgman-Stockbarger technique, in a comparison with the high performance LaBr3 or LaCl3 crystals, cerium based alkali halides crystals, (Cs2CeBr5) and (K2CeBr5) have similar scintillation properties, while being much less hygroscopic. Furthermore, cesium based compounds will not suffer from the self-activity present in potassium and lanthanum compounds. However the Cs2CeBr5 crystals did not grow properly probably due to non-congruent melting or to some phase transition during cooling. Keywords." Scintillator materials; Ce3+; Energy resolution; Light yield; K2CeBr5
Photon upconversion, particularly via triplet-triplet annihilation (TTA), could prove beneficial in expanding the efficiencies and overall impacts of optoelectronic devices across a multitude of technologies. The recent development of bulk metal halide perovskites as triplet sensitizers is one potential step toward the industrialization of upconversion-enabled devices. In this work, we investigate the impact of varying additions of bromide into a lead iodide perovskite thin film on the TTA upconversion process in the annihilator molecule rubrene. We find an interplay between the bromide content and the overall device efficiency. In particular, a higher bromide content results in higher internal upconversion efficiencies, enabled by more efficient charge extraction at the interface, likely due to a more favorable band alignment. However, the external upconversion efficiency decreases, as the absorption cross section in the near infrared is reduced. The highest upconversion performance is found in our study for a bromide content of 5%. This result can be traced back to a high absorption cross section in the near infrared and higher photoluminescence quantum yield in comparison to the iodide-only perovskite, as well as an increased driving force for charge transfer.