Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Strain Tuning in Complex Oxide Epitaxial Films Using an Ultrathin Strontium Aluminate Buffer Layer

A reliable method to apply biaxial strain over a wide range of values with minimal dislocation generation is critical for the study of strain dependent physical properties in oxide thin films and heterostructures. In this study, we systematically controlled the strain state in a perovskite manganite thin film by as much as 1% using a new ultrathin strain-releasing buffer layer Sr 3 Al 2 O 6 , and observed signatures of accompanying magnetic and metal–insulator transitions. The near-zero strain state is achieved within five nanometers of buffer layer thickness, substantially thinner than any oxide epitaxial buffer layers that can continuously tune the film strain states. Furthermore, the majority of misfit dislocations were confined to the Sr 3 Al 2 O 6 layer, structurally decoupling defects in the film from the substrate.

36 MATERIALS SCIENCE↗

Revealing the Bonding Environment of Zn in ALD Zn(O,S) Buffer Layers through X-ray Absorption Spectroscopy

Zn(O,S) buffer layer electronic configuration is determined by its composition and thickness, tunable through atomic layer deposition. The Zn K and L-edges in the X-ray absorption near edge structure verify ionicity and covalency changes with S content. A high intensity shoulder in the Zn K-edge indicates strong Zn 4s hybridized states and a preferred c-axis orientation. 2–3 nm thick films with low S content show a subdued shoulder showing less contribution from Zn 4s hybridization. Here, a lower energy shift with film thickness suggests a decreasing bandgap. Further, ZnSO 4 forms at substrate interfaces, which may be detrimental for device performance.

36 MATERIALS SCIENCE↗

Exciton-blocking treatments for buffer layers in organic photovoltaics

Disclosed herein are exciton-blocking treatments for buffer layers used in organic photosensitive optoelectronic devices. More specifically, the organic photosensitive optoelectronic devices described herein include at least one self-assembled monolayer disposed on the surface of an anode buffer layer. Methods of preparing these devices are also disclosed. The present disclosure further relates to methods of forming at least one self-assembled monolayer on a substrate.

Forrest, Stephen R.↗

Tuning the interfacial hole injection barrier between p-type organic materials and Co using a MoO{sub 3} buffer layer

We demonstrate that the interfacial hole injection barrier {Delta}{sub h} between p-type organic materials (i.e., CuPc and pentacene) and Co substrate can be tuned by the insertion of a MoO{sub 3} buffer layer. Using ultraviolet photoemission spectroscopy, it was found that the introduction of MoO{sub 3} buffer layer effectively reduces the hole injection barrier from 0.8 eV to 0.4 eV for the CuPc/Co interface, and from 1.0 eV to 0.4 eV for the pentacene/Co interface, respectively. In addition, by varying the thickness of the buffer, the tuning effect of {Delta}{sub h} is shown to be independent of the thickness of MoO{sub 3} interlayer at both CuPc/Co and pentacene/Co interfaces. This Fermi level pinning effect can be explained by the integer charge-transfer model. Therefore, the MoO{sub 3} buffer layer has the potential to be applied in p-type organic spin valve devices to improve the device performance via reducing the interfacial hole injection barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Radiography for TRISO Buffer Layer Density Measurement

Tristructural isotropic (TRISO) fuel particles consist of a central uranium-bearing kernel and a series of coating layers designed to retain fission products and to ensure fuel performance. Several parameters such as thickness and density must be measured for these coating layers to show that they conform with fuel specifications. Current methods for measuring the density of pyrolytic carbon and silicon carbide layers (liquid gradient density column) and the buffer layer (mercury porosimetry) generate Resource Conservation and Recovery Act (RCRA) radiological-mixed waste. In addition, measurement of buffer and inner pyrolytic carbon layer densities require hot sampling or interrupted coating runs and the mercury porosimetry method used for buffer density measurement only measures the mean buffer density, not the interparticle distribution. A new approach has been evaluated to measure the density of coating layers in TRISO particles based on the dependence of x-ray attenuation in radiographs on material density. This method does not generate RCRA mixed waste, measures density on a particle-by-particle basis, and in principle is capable of measuring the density of all coating layers in a single process. Initial results using thinned TRISO particle sections to evaluate radiography measurement of density as a quality control characterization method are reported herein. In this work, the primary focus is on measurement of the density of the buffer layer; however, with appropriate calibration the method should be applicable to other coating layers. Improvements to the initial method and a full demonstration of the method on the remaining coating layers may be pursued as a future effort.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Domain matched epitaxial growth of (111) Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films on (0001) Al{sub 2}O{sub 3} with ZnO buffer layer

Epitaxial (111) Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} (BST) thin films have been grown by pulsed laser deposition on (0001) Al{sub 2}O{sub 3} substrate with ZnO as buffer layer. The x-ray ω-2θ, Φ-scan and reciprocal space mapping indicate epitaxial nature of BST thin films. The domain matched epitaxial growth of BST thin films over ZnO buffer layer was confirmed using Fourier filtered high resolution transmission electron microscope images of the film-buffer interface. The incorporation of ZnO buffer layer effectively suppressed the lattice mismatch and promoted domain matched epitaxial growth of BST thin films. Coplanar inter digital capacitors fabricated on epitaxial (111) BST thin films show significantly improved tunable performance over polycrystalline thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In 2 O 3 -Ga 2 O 3 Alloys as Potential Buffer Layers in CdTe Thin-Film Solar Cells

The efficiency of state-of-the-art Cd Te solar cells remains limited by the relatively low open-circuit voltage (V OC ). Improving the front interface is key towards realizing a higher V OC after achieving the necessary bulk carrier density and lifetime. Recent efforts in identifying buffer layers beyond Cd S have focused on Mg x Zn 1-x O, which offers tunability of the band offsets, but often suffers from high interfacial defect densities. Ga 2 O 3 -based buffer layers demonstrate tremendous improvements in interfacial defect passivation in crystalline silicon and dye-sensitized solar cells, leading to record high V OC , yet remain largely unexplored in Cd Te-based devices. Here, we perform hybrid density-functional-theory calculations to investigate pure Ga 2 O 3 and InGaO 3 alloys as a window layer in Cd Te photovoltaics. We report calculated band offsets for several pairs of solid-solid interfaces comprising transparent conducting oxide (TCO) and Cd Te heterojunctions. The results support a large conduction band offset spike of 0.67 eV for the Cd Te/Ga 2 O 3 (100) interface, while the offset is reduced to 0.18 eV for the InGaO 3 alloy and matches closely with the preferred optimum value of 0.2 eV. Device-level modeling tests of Cd Te solar cells integrating our results indicate that the highest efficiency is achieved with InGaO 3 acting both as a buffer layer and TCO. Finally, our results suggest that alloys of In 2 O 3 and Ga 2 O 3 may be attractive alternatives to Mg x Zn 1-x O for tailoring optimal conduction-band offsets of the buffer and TCO layers in high-efficiency Cd Te thin-film solar cells.

14 SOLAR ENERGY↗

Effects of SrRuO{sub 3} buffer layer thickness on multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} thin films

Multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} (BLFMO) thin films were deposited on SrRuO{sub 3} (SRO) buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates with variable buffer layer thicknesses by using off-axis radio frequency sputtering. The orientation of BLFMO thin films is dependent on the SRO buffer layer thickness, which leads to a change in ferroelectric behavior. Due to the low leakage currents arising from the orientation change in association with the variation in SRO buffer layer thickness and the La and Mn codoping, well saturated P-E hysteresis loops (2P{sub r}approx210.0 muC/cm{sup 2} and 2E{sub c}approx525.5 kV/cm) are shown for the (111)-oriented BLFMO thin film at room temperature and 1 kHz. It also demonstrates little ferroelectric fatigue on 10{sup 9} switching cycles. Moreover, the BLFMO thin film exhibits the enhanced magnetic behavior as compared to pure BFO thin films, due to the canting of antiferromagnetically ordered spins.

36 MATERIALS SCIENCE↗

The effects of buffer layers on the performance and stability of flexible InGaZnO thin film transistors on polyimide substrates

We demonstrated the fabrication of flexible amorphous indium gallium zinc oxide thin-film transistors (TFTs) on high-temperature polyimide (PI) substrates, which were debonded from the carrier glass after TFT fabrication. The application of appropriate buffer layers on the PI substrates affected the TFT performance and stability. The adoption of the SiN{sub x}/AlO{sub x} buffer layers as water and hydrogen diffusion barriers significantly improved the device performance and stability against the thermal annealing and negative bias stress, compared to single SiN{sub x} or SiO{sub x} buffer layers. The substrates could be bent down to a radius of curvature of 15 mm and the devices remained normally functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural heterogeneity of the buffer layer of TRISO nuclear fuel particles

Tristructural isotropic (TRISO) nuclear fuel particles contain a layered spherical shell designed to retain fission products; however, failure occurs in rare cases—commonly initiated in the porous pyrocarbon buffer layer. Achieving a comprehensive understanding of the buffer-initiated failure mechanisms requires detailed characterization of the buffer porosity and its heterogeneous distribution across multiple length scales. Here we performed FIB-SEM tomography across the buffer layer thickness (~100 µm) to produce 3D reconstructions of the buffer microstructure with 50 nm spatial resolution. We found an average overall porosity of ~14%, which does not solely account for the low density of the buffer (50% of the theoretical density). Additionally, the local porosity and its fluctuation increase from the kernel interface towards the inner pyrocarbon (IPyC) layer, which we attribute to the chemical vapor deposition process conditions during the TRISO particle fabrication. Detailed characterization of the porous microstructure—including analysis of the pore size, distribution, shape, and orientation—provides insight into the process-structure-property-performance relations of TRISO nuclear fuel particles and will inform multiscale models designed to predict the failure of TRISO particles under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Back contact buffer layer for thin-film solar cells

A photovoltaic cell structure is disclosed that includes a buffer/passivation layer at a CdTe/Back contact interface. The buffer/passivation layer is formed from the same material that forms the n-type semiconductor active layer. In one embodiment, the buffer layer and the n-type semiconductor active layer are formed from cadmium sulfide (CdS). A method of forming a photovoltaic cell includes the step of forming the semiconductor active layers and the buffer/passivation layer within the same deposition chamber and using the same material source.

14 SOLAR ENERGY↗

Magneto-transport study on Sn-rich Sn 1–x Ge x thin films enabled by CdTe buffer layer

α-Sn, generally known as gray tin, has attracted significant scientific interest due to its potential to host novel topological phases. Studying the transport properties of α-Sn thin films grown on the InSb substrate has been challenging, as the InSb substrate also significantly contributes to the transport properties. In this article, we report a novel approach to epitaxially grow α-Sn thin films on an InSb substrate with a resistive buffer layer of CdTe. Thin films of α–Sn 1–x Ge x (x = 0, 0.025) alloy of 15 nm thickness have been grown using molecular beam epitaxy. The high quality of the samples has been determined through high-resolution x-ray diffraction. The CdTe buffer layer has high resistance and acts as an insulating virtual substrate, which significantly suppresses contribution from InSb. Magnetotransport measurements show clear Shubnikov–de Hass oscillations in α–Sn 1–x Ge x (x = 0, 0.025) thin films. A change in oscillation frequency is observed upon alloying with Ge, implying a modification in the electronic structure and demonstrating the effectiveness of the CdTe buffer layer approach. Furthermore, this work provides a new approach that enables the electronic transport characterization of the α–Sn 1–x Ge x alloy system, which enables the study of the topological quantum states using electronic transport and their device applications.

36 MATERIALS SCIENCE↗

Selective growth of Pb islands on graphene/SiC buffer layers

Graphene is fabricated by thermal decomposition of silicon carbide (SiC) and Pb islands are deposited by Pb flux in molecular beam epitaxy chamber. It is found that graphene domains and SiC buffer layer coexist. Selective growth of Pb islands on SiC buffer layer rather than on graphene domains is observed. It can be ascribed to the higher adsorption energy of Pb atoms on the 6√(3) reconstruction of SiC. However, once Pb islands nucleate on graphene domains, they will grow very large owing to the lower diffusion barrier of Pb atoms on graphene. The results are consistent with first-principle calculations. Since Pb atoms on graphene are nearly free-standing, Pb islands grow in even-number mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Cubic-Phase Purity InN on MgO (001) Using Cubic-Phase GaN as a Buffer Layer

High cubic-phase purity InN films were grown on MgO (001) substrates by molecular beam epitaxy with a cubic-phase GaN buffer layer. The cubic phase purity of the InN grown layers has been analyzed by high resolution X-ray diffraction, {mu}-Raman scattering and transmission electron microscopy. It is evidenced that the hexagonal-phase content in the InN overlayer much depends on hexagonal-phase content in the cubic-phase GaN buffer layer and increases with increasing the hexagonal-phase GaN content. From Raman scattering measurements, in addition, the InN layer with lowest hexagonal component (6%), only Raman characteristics of cubic TO{sub InN} and LO{sub InN} modes were observed, indicating a formation of a small amount of stacking faults, which does not affect on vibrational property.

36 MATERIALS SCIENCE↗

Photodetectors with an InGaAs Active Region and InGaP Metamorphic Buffer Layer Grown on GaAs Substrates

The results of studying the reverse dark currents of photodiodes for a wavelength of 1.06 μm grown on a GaAs substrate with the help of an InGaP metamorphic buffer layer are presented. The metalorganic chemical vapor epitaxy (MOCVD) growth technology of InGaP metamorphic buffer layers with a stepwise composition variation is developed. Photodiodes with a photosensitive area of 1 mm in diameter and radiation input through the substrate are fabricated. The photodiode dark current at room temperature and reverse bias of –3 V was 50 nA. It is assumed that the bulk component of the dark current is caused by the tunneling mechanism through the trap levels.

36 MATERIALS SCIENCE↗

Improvement of the interfacial Dzyaloshinskii-Moriya interaction by introducing a Ta buffer layer

We report systematic measurements of the interfacial Dzyaloshinskii-Moriya interaction (iDMI) by employing Brillouin light scattering in Pt/Co/AlO{sub x} and Ta/Pt/Co/AlO{sub x} structures. By introducing a tantalum buffer layer, the saturation magnetization and the interfacial perpendicular magnetic anisotropy are significantly improved due to the better interface between heavy metal and ferromagnetic layer. From the frequency shift between Stokes- and anti-Stokes spin-waves, we successively obtain considerably larger iDM energy densities (D{sub max} = 1.65 ± 0.13 mJ/m{sup 2} at t{sub Co} = 1.35 nm) upon adding the Ta buffer layer, despite the nominally identical interface materials. Moreover, the energy density shows an inverse proportionality with the Co layer thickness, which is the critical clue that the observed iDMI is indeed originating from the interface between the Pt and Co layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparative study of the annealing behavior of Cu(In,Ga)(S,Se){sub 2} based solar cells with an indium sulfide buffer layer, partly submitted to wet chemical treatments

Indium sulfide thin films deposited via thermal evaporation from compound source material have been successfully utilized as a cadmium free buffer layer for Cu(In,Ga)Se{sub 2} based solar cells. However, high efficiencies are only reached after an additional annealing step. In this work, the annealing behavior of Cu(In,Ga)(S,Se){sub 2} based indium sulfide buffered solar cells is compared to the annealing behavior of similar cells, which were submitted to wet chemical treatments partly containing cadmium ions. Upon annealing a significant improvement of the initial solar cell characteristics is observed for the untreated cell and is related to the increase of activation energy for the carrier recombination process and a decrease of the ideality factor within the one diode model. It is shown here that this improvement can also be achieved by wet treatments of the absorber prior to buffer layer deposition. Upon annealing these treated cells still gain in collection length but lose open circuit voltage, which is explained here within a model including a highly p-doped absorber surface layer and supported by simulations showing that a decrease in doping density of such a surface layer would lead to the observed effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ZnO film with ultra-low background electron concentration grown by plasma-assisted MBE using Mg film as the buffer layer

Highlights: ► High quality ZnO film with ultra-low background electron concentration is grown by plasma-assisted molecular beam epitaxy using Mg film as a buffer layer. ► High resolution X-ray diffraction and photoluminescence (PL) spectroscopy indicate a high degree of crystallization. ► Hall measurement shows a carrier concentration as low as ∼10{sup 14} cm{sup −3}. ► The mechanism of the improved crystallinity is discussed in detail. -- Abstract: High quality ZnO epilayer with background electron concentration as low as 2.6 × 10{sup 14} cm{sup −3} was obtained by plasma-assisted MBE on c-sapphire using a thin Mg film as the buffer layer. High-resolution XRD measurement shows a sharp (0 0 2) peak with full width at half maximum (FWHM) of only 0.029°. Photoluminescence spectroscopy presents a weak defect-related near-edge emission. A metal–semiconductor–metal (MSM) typed photodetector based on the material demonstrates a response of ∼43 A/W under the bias of 1 V and an ON/OFF ratio of 10{sup 4}. This un-doped ZnO with ultra-low background electron concentration could be a promising starting material for p-type doping.

36 MATERIALS SCIENCE↗