Search NASA⌕ Search

SEARCH · Search NASA

Results for “butyrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Engineering Clostridium Tyrobutyricum for High Butanol Production through Induction Expression of Exogenous NADPH-Dependent HBD

Clostridium tyrobutyricum Δ cat 1:: adh E2 is a promising cell factory for butanol production because of its robustness, high butanol tolerance, and minimal butyrate production. However, excessive acetate and ethanol production remains a major bottleneck limiting its butanol yield. Coexpressing an exogenous hbd ( Ck ) encoding the NADPH-dependent 3-hydroxybutyryl-CoA dehydrogenase (HBD) from Clostridium kluyveri with adh E2 could increase the C4 carbon flux, resulting in increased butanol and decreased acetate and ethanol production. However, constitutively overexpressing hbd ( Ck ) in Δ cat 1:: adh E2 shows little improvement in butanol yield, productivity, and selectivity, which might be caused by redox imbalance and growth inhibition. To alleviate this problem, C. tyrobutyricum MΔ cat 1:: adh E2- Pbgal-hbd ( Ck ) with a dynamic expression of hbd ( Ck ) controlled by an inducible promoter was developed. In serum bottle fermentation at 37 °C, when the hbd ( Ck ) expression was induced at 12 h or in the early exponential phase, butanol production increased ∼20% in yield (from 0.22 to 0.27 g/g glucose), 87.5% in productivity (from 0.16 to 0.30 g/L·h), and 52% in selectivity (from 0.46 to 0.70 g/g total products) compared to the control strain without expressing any hbd(Ck), whereas hbd ( Ck ) expression induced at 0 or 24 h in MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) or constitutively in MΔ cat 1:: adh E2-P cat 1- hbd ( Ck ) showed significantly lower butanol yield and productivity. At 25 °C, MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) with 12 h induction produced the highest butanol titer of 23 g/L with 0.32 g/g yield, 0.16 g/L·h productivity, and 0.83 g/g product selectivity due to much reduced acetate formation. Subsequent scale-up to a stirred-tank bioreactor at 37 °C increased productivity to 0.39 g/L·h while also achieving high butanol titer (21.8 g/L), yield (0.30 g/g), and selectivity (0.67 g/g). The optimized induction timing resulted in a balanced NAD(P)H pool, effectively channeling substrates toward butanol biosynthesis. It was concluded that the timing for hbd ( Ck ) expression was critical as it affected glucose catabolism, cell growth, redox balance, and carbon flux distribution. These findings underscore the potential of dynamic metabolic regulation to overcome bottlenecks in biobutanol production, providing a scalable and economically viable bioprocess for industrial application.

Clostridium tyrobutyricum↗

Chain-End Controlled Depolymerization Selectivity in α,α-Disubstituted Propionate PHAs with Dual Closed-Loop Recycling and Record-High Melting Temperature

In this article, within the large poly(3-hydroxyalkanoate) (PHA) family, C3 propionates are much less studied than C4 butyrates, with the exception of α,α-disubstituted propionate PHAs, particularly poly(3-hydroxy-2,2-dimethylpropionate), P3H(Me) 2 P, due to its high melting temperature (T m ~ 230 °C) and crystallinity (~76%). However, inefficient synthetic routes to its monomer 2,2-dimethylpropiolactone [(Me) 2 PL] and extreme brittleness of P3H(Me) 2 P largely hinder its broad applications. Here, we introduce simple, efficient step-growth polycondensation (SGP) of a hydroxyacid or methyl ester to afford P3H(Me) 2 P with low to medium molar mass, which is then utilized to produce lactones through base-catalyzed depolymerization. The ring-opening polymerization (ROP) of the 4-membered lactone leads to high-molar-mass P3H(Me) 2 P, which can be depolymerized by hydrolysis to the hydroxyacid in 99% yield or methanolysis to the hydroxyester in 91% yield, achieving closed-loop recycling via both SGP and ROP routes. Intriguingly, the chain end of the SGP-P3H(Me) 2 P determines the depolymerization selectivity toward 4- or 12-membered lactone formation, while both can be repolymerized back to P3H(Me) 2 P. Through the formation of copolymers P3H(Me/R) 2 P (R = Et, n Pr), PHAs with high tensile strength and ductility, coupled with high barriers to water vapor and oxygen, have been created. Notably, the PHA structure–property study led to P3H( n Pr) 2 P with a record-high T m of 266 °C within the PHA family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renewable fatty acid ester production in Clostridium

Abstract Bioproduction of renewable chemicals is considered as an urgent solution for fossil energy crisis. However, despite tremendous efforts, it is still challenging to generate microbial strains that can produce target biochemical to high levels. Here, we report an example of biosynthesis of high-value and easy-recoverable derivatives built upon natural microbial pathways, leading to improvement in bioproduction efficiency. By leveraging pathways in solventogenic clostridia for co-producing acyl-CoAs, acids and alcohols as precursors, through rational screening for host strains and enzymes, systematic metabolic engineering-including elimination of putative prophages, we develop strains that can produce 20.3 g/L butyl acetate and 1.6 g/L butyl butyrate. Techno-economic analysis results suggest the economic competitiveness of our developed bioprocess. Our principles of selecting the most appropriate host for specific bioproduction and engineering microbial chassis to produce high-value and easy-separable end products may be applicable to other bioprocesses.

60 APPLIED LIFE SCIENCES↗

Molecular basis of the pleiotropic effects by the antibiotic amikacin on the ribosome

Aminoglycosides are a class of antibiotics that bind to ribosomal RNA and exert pleiotropic effects on ribosome function. Amikacin, the semisynthetic derivative of kanamycin, is commonly used for treating severe infections with multidrug-resistant, aerobic Gram-negative bacteria. Amikacin carries the 4-amino-2-hydroxy butyrate (AHB) moiety at the N 1 amino group of the central 2-deoxystreptamine (2-DOS) ring, which may confer amikacin a unique ribosome inhibition profile. Here we use in vitro fast kinetics combined with X-ray crystallography and cryo-EM to dissect the mechanisms of ribosome inhibition by amikacin and the parent compound, kanamycin. Amikacin interferes with tRNA translocation, release factor-mediated peptidyl-tRNA hydrolysis, and ribosome recycling, traits attributed to the additional interactions amikacin makes with the decoding center. The binding site in the large ribosomal subunit proximal to the 3’-end of tRNA in the peptidyl (P) site lays the groundwork for rational design of amikacin derivatives with improved antibacterial properties.

59 BASIC BIOLOGICAL SCIENCES↗

Genomic and functional analyses of fungal and bacterial consortia that enable lignocellulose breakdown in goat gut microbiomes

Abstract The herbivore digestive tract is home to a complex community of anaerobic microbes that work together to break down lignocellulose. These microbiota are an untapped resource of strains, pathways and enzymes that could be applied to convert plant waste into sugar substrates for green biotechnology. We carried out more than 400 parallel enrichment experiments from goat faeces to determine how substrate and antibiotic selection influence membership, activity, stability and chemical productivity of herbivore gut communities. We assembled 719 high-quality metagenome-assembled genomes (MAGs) that are unique at the species level. More than 90% of these MAGs are from previously unidentified herbivore gut microorganisms. Microbial consortia dominated by anaerobic fungi outperformed bacterially dominated consortia in terms of both methane production and extent of cellulose degradation, which indicates that fungi have an important role in methane release. Metabolic pathway reconstructions from MAGs of 737 bacteria, archaea and fungi suggest that cross-domain partnerships between fungi and methanogens enabled production of acetate, formate and methane, whereas bacterially dominated consortia mainly produced short-chain fatty acids, including propionate and butyrate. Analyses of carbohydrate-active enzyme domains present in each anaerobic consortium suggest that anaerobic bacteria and fungi employ mostly complementary hydrolytic strategies. The division of labour among herbivore anaerobes to degrade plant biomass could be harnessed for industrial bioprocessing.

59 BASIC BIOLOGICAL SCIENCES↗

Catalyst and reactor design considerations for selective production of acids by oxidative cleavage of alkenes and unsaturated fatty acids with H 2 O 2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η 2 -O 2 ) complexes vs. H 2 O 2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H 2 O 2 concentrations. Semi-batch reactors with continuous introduction of H 2 O 2 solutions offer the means to maintain low H 2 O 2 concentrations while providing sufficient quantities of H 2 O 2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. Furthermore, this kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H 2 O 2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H 2 O 2 feed rate increases selectivity towards oxidative cleavage products and selective use of H 2 O 2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semibatch reactors with optimized molar feed rates of H 2 O 2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H 2 O 2 selectivity (3% to 30%). In addition, semibatch reaction conditions used avoid H 2 O 2 -mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure and thermal annealing effects on the photoconversion efficiency of polymer solar cells

This paper presents the results of experimental and theoretical studies of the effects of pressure and thermal annealing on the photo-conversion efficiencies (PCEs) of polymer solar cells with active layers that consist of a mixture of poly(3-hexylthiophene-2,5-diyl) and fullerene derivative (6,6)-phenyl-C 61 -butyric acid methyl ester. The PCEs of the solar cells increased from ~2.3% (for the unannealed devices) to ~3.7% for devices annealed at ~150 °C. A further increase in thermal annealing temperatures (beyond 150 °C) resulted in lower PCEs. Further improvements in the PCEs (from ~3.7% to ~5.4%) were observed with pressure application between 0 and 8 MPa. However, a decrease in PCEs was observed for pressure application beyond 8 MPa. The improved performance associated with thermal annealing is attributed to changes in the active layer microstructure and texture, which also enhance the optical absorption, mobility, and lifetime of the optically excited charge carriers. The beneficial effects of applied pressure are attributed to the decreased interfacial surface contacts that are associated with pressure application. The implications of the results are then discussed for the design and fabrication of organic solar cells with improved PCEs.

36 MATERIALS SCIENCE↗

Supplemental selenium source on gut health: insights on fecal microbiome and fermentation products of growing puppies

ABSTRACT Selenium is an essential trace element that can modulate the gut microbiome with an impact on host health. The present study aimed to evaluate the effects of organic (selenium-enriched yeast) vs inorganic (sodium selenite) selenium source on fecal end-fermentation products and gut microbiome of puppies from 20 to 52 weeks of age. Alpha and beta diversity of the gut bacterial community were affected by age but not by gender or selenium source. The relative abundance of taxa was differently affected by age, and the DNA concentration of all selected bacterial groups increased with age, although total volatile fatty acids (VFA), acetate, propionate, caproate and lactate concentrations decreased. Organic selenium was associated with a higher concentration of total VFA, propionate and butyrate, a higher number of DNA copies of Lactobacillus, and a trend to lower DNA copies of Escherichia coli. Effects on fecal microbiome during growth differed with selenium source. Females had higher fecal end-fermentation products related to protein degradation, whereas males had higher DNA concentration of Bifidobacterium. Organic selenium might be beneficial over inorganic for dog food supplementation due to the positive modulation of the gut microbiome observed in puppies.

Pereira, Ana Margarida↗

Turicibacter bilis sp. nov., a novel bacterium isolated from the chicken eggshell and swine ileum

Three novel, anaerobic, Gram-positive bacteria were isolated from the eggshell of two separate white leghorn chicken flocks and the ileum of a healthy pig, and designated MMM721 T , ISU324 and PIG517 respectively. Cells were pleomorphic and capable of forming long chains of rods or coccoid clusters. Phylogenetic analysis of the 16S rRNA gene sequences identified these strains to be within the genus Turicibacter, of which only one species, Turicibacter sanguinis, has been formally described. However, whole genome sequencing of novel isolates returned a digital DNA–DNA hybridization value of 22.5% and average nucleotide identity (ANI) values of 76.4% (ANIb) and 86.0% (ANIm), indicating divergence between the type strain MMM721 T and T. sanguinis, suggesting the strains represented a novel species. The major fatty acid methyl esters of strain MMM721 T were C 16:0 , C 18:1 ω7c and C 18:0 . The strains mainly produced the volatile fatty acid lactate, along with smaller amounts of acetate and butyrate. Together, these data indicate that MMM721 T , along with ISU324 and PIG517, represent a novel species within the genus Turicibacter. We propose the name Turicibacter bilis sp. nov. for the species. The type strain is MMM721 T (=ATCC TSD-238 T =CCUG 74757 T ).

59 BASIC BIOLOGICAL SCIENCES↗

Genomics and physiology of Catenibacillus, human gut bacteria capable of polyphenol C-deglycosylation and flavonoid degradation

The genusCatenibacillus(familyLachnospiraceae, phylumBacillota) includes only one cultivated species so far,Catenibacillus scindens,isolated from human faeces and capable of deglycosylating dietary polyphenols and degrading flavonoid aglycones. Another human intestinalCatenibacillusstrain not taxonomically resolved at that time was recently genome-sequenced. We analysed the genome of this novel isolate, designatedCatenibacillus decagia, and showed its ability to deglycosylateC-coupled flavone and xanthone glucosides andO-coupled flavonoid glycosides. Most of the resulting aglycones were further degraded to the corresponding phenolic acids. Including the recently sequenced genome ofC. scindensand ten faecal metagenome-assembled genomes assigned to the genusCatenibacillus, we performed a comparative genome analysis and searched for genes encoding potentialC-glycosidases and other polyphenol-converting enzymes. According to genome data and physiological characterization, the core metabolism ofCatenibacillusstrains is based on a fermentative lifestyle with butyrate production and hydrogen evolution. BothC. scindensandC. decagiaencode a flavonoidO-glycosidase, a flavone reductase, a flavanone/flavanonol-cleaving reductase and a phloretin hydrolase. Several gene clusters encode enzymes similar to those of the flavonoidC-deglycosylation system ofDoreastrain PUE (DgpBC), while separately located genes encode putative polyphenol-glucoside oxidases (DgpA) required forC-deglycosylation. The diversity ofdgpAanddgpBCgene clusters might explain the broadC-glycoside substrate spectrum ofC. scindensandC. decagia. The otherCatenibacillusgenomes encode only a few potential flavonoid-converting enzymes. Our results indicate that severalCatenibacillusspecies are well-equipped to deglycosylate and degrade dietary plant polyphenols and might inhabit a corresponding, specific niche in the gut.

Genetics & Heredity↗

The phototrophic purple non‐sulfur bacteria Rhodomicrobium spp. are novel chassis for bioplastic production

Abstract Petroleum‐based plastics levy significant environmental and economic costs that can be alleviated with sustainably sourced, biodegradable, and bio‐based polymers such as polyhydroxyalkanoates (PHAs). However, industrial‐scale production of PHAs faces barriers stemming from insufficient product yields and high costs. To address these challenges, we must look beyond the current suite of microbes for PHA production and investigate non‐model organisms with versatile metabolisms. In that vein, we assessed PHA production by the photosynthetic purple non‐sulfur bacteria (PNSB) Rhodomicrobium vannielii and Rhodomicrobium udaipurense. We show that both species accumulate PHA across photo‐heterotrophic, photo‐hydrogenotrophic, photo‐ferrotrophic, and photo‐electrotrophic growth conditions, with either ammonium chloride (NH 4 Cl) or dinitrogen gas (N 2 ) as nitrogen sources. Our data indicate that nitrogen source plays a significant role in dictating PHA synthesis, with N 2 fixation promoting PHA production during photoheterotrophy and photoelectrotrophy but inhibiting production during photohydrogenotrophy and photoferrotrophy. We observed the highest PHA titres (up to 44.08 mg/L, or 43.61% cell dry weight) when cells were grown photoheterotrophically on sodium butyrate with N 2 , while production was at its lowest during photoelectrotrophy (as low as 0.04 mg/L, or 0.16% cell dry weight). We also find that photohydrogenotrophically grown cells supplemented with NH 4 Cl exhibit the highest electron yields – up to 58.89% – while photoheterotrophy demonstrated the lowest (0.27%–1.39%). Finally, we highlight superior electron conversion and PHA production compared to a related PNSB, Rhodopseudomonas palustris TIE‐1. This study illustrates the value of studying non‐model organisms like Rhodomicrobium for sustainable PHA production and indicates future directions for exploring PNSB metabolisms.

59 BASIC BIOLOGICAL SCIENCES↗

Insights into genetic determinants of volatile fatty acid catabolism in Cupriavidus necator H16

The soil bacterium Cupriavidus necator H16 is a promising host for upgrading waste-derived volatile fatty acids (VFAs) into renewable biochemicals. While bacterial VFA metabolic pathways are well understood, the C. necator genome encodes multiple enzymes for each catabolic step, and the degree of substrate specificity among these homologs is currently unknown. To gain insight into the catabolism of VFA substrates in C. necator, we performed transcriptomics on cells grown with acetate, propionate, butyrate, valerate, or hexanoate as the sole source of carbon and energy. These data revealed that C. necator upregulates multiple sets of genes putatively involved in substrate activation and β-oxidation in response to VFAs. To better understand this redundancy, we performed biochemical and genetic deletion studies of acyl-CoA synthetase enzymes upregulated during growth on VFA substrates. These results demonstrated the functional redundancy of the C. necator VFA catabolism and led to the identification of a gene cluster, H16_B1332-H16_B1337, that contains several genes that are important for the efficient catabolism of hexanoate. Constitutive expression of a second copy of these hexanoate catabolism genes did not improve growth of C. necator on hexanoate, suggesting that other factors (e.g., redox, transport, or toxicity) may be limiting for growth. Collectively, this work provides new insight into how C. necator uses metabolic regulation to effectively utilize VFA substrates and uncovers the important role of the gene cluster H16_B1332-H16_B1337 in the catabolism of hexanoate.

09 BIOMASS FUELS↗

Wetlands harbor lactic acid-driven chain elongators

Wetlands are globally significant carbon storage hotspots. Recent research has suggested that microbially derived metabolites may contribute to soil organic matter formation. Identifying pathways driving the formation of such metabolites is critical to understand the global impact of wetland carbon cycling. Here, we evaluate the presence of chain-elongating organisms converting two to three carbon compounds (i.e., lactic and acetic acid) to medium-chain carboxylic acids (MCCA; i.e., six-carbon caproic acid) in wetland soils. We demonstrate the enrichment of a lactic acid-driven chain-elongating community from wetland soils producing a mixture of butyric and caproic acid. The enriched community was dominated by Clostridiaceae, Ruminococcaceae, and Lachnospiraceae, three families with known chain elongators. Amplicon sequencing identified three Ruminococcaceae and one Clostridiaceae zero-radius OTU (zOTU) that were (i) present in the soil, (ii) enriched over 1% relative abundance in the bioreactor, and (iii) were closely related to known chain elongators. Moreover, close relatives of the three Ruminococcaceae zOTU were also observed in several other wetland microbiomes. From this observation, we conclude that close relatives of known chain elongators, potentially capable of lactic acid-driven MCCA production themselves, are present in wetland soils. This observation may have implications for our understanding of carbon cycling and storage in wetland ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Exposing new taxonomic variation with inflammation — a murine model-specific genome database for gut microbiome researchers

The murine CBA/J mouse model widely supports immunology and enteric pathogen research. This model has illuminated Salmonella interactions with the gut microbiome since pathogen proliferation does not require disruptive pretreatment of the native microbiota, nor does it become systemic, thereby representing an analog to gastroenteritis disease progression in humans. Despite the value to broad research communities, microbiota in CBA/J mice are not represented in current murine microbiome genome catalogs. Here we present the first microbial and viral genomic catalog of the CBA/J murine gut microbiome. Using fecal microbial communities from untreated and Salmonella-infected, highly inflamed mice, we performed genomic reconstruction to determine the impacts on gut microbiome membership and functional potential. From high depth whole community sequencing (~ 42.4 Gbps/sample), we reconstructed 2281 bacterial and 4516 viral draft genomes. Salmonella challenge significantly altered gut membership in CBA/J mice, revealing 30 genera and 98 species that were conditionally rare and unsampled in non-inflamed mice. Additionally, inflamed communities were depleted in microbial genes that modulate host anti-inflammatory pathways and enriched in genes for respiratory energy generation. Our findings suggest decreases in butyrate concentrations during Salmonella infection corresponded to reductions in the relative abundance in members of the Alistipes. Strain-level comparison of CBA/J microbial genomes to prominent murine gut microbiome databases identified newly sampled lineages in this resource, while comparisons to human gut microbiomes extended the host relevance of dominant CBA/J inflammation-resistant strains. This CBA/J microbiome database provides the first genomic sampling of relevant, uncultivated microorganisms within the gut from this widely used laboratory model. Using this resource, we curated a functional, strain-resolved view on how Salmonella remodels intact murine gut communities, advancing pathobiome understanding beyond inferences from prior amplicon-based approaches. Salmonella-induced inflammation suppressed Alistipes and other dominant members, while rarer commensals like Lactobacillus and Enterococcus endure. The rare and novel species sampled across this inflammation gradient advance the utility of this microbiome resource to benefit the broad research needs of the CBA/J scientific community, and those using murine models for understanding the impact of inflammation on the gut microbiome more generally.

59 BASIC BIOLOGICAL SCIENCES↗

Association Between Preoperative Muscle Mass and Intraoperative Bacterial Translocation in Patients Undergoing Hepatectomy, Pancreatoduodenectomy, and Esophagectomy

Purpose: This study investigated the correlation between the fecal profile and muscle mass, which has not been elucidated before. Methods: This study included patients who underwent hepatectomy, pancreatoduodenectomy, or esophagectomy and had fecal samples collected preoperatively and mesenteric lymph nodes (MLNs) harvested intraoperatively to determine the fecal profile and presence of bacteria in the MLNs. Total psoas area (TPA) was measured at the third lumbar vertebra using preoperative computed tomography images. TPA was standardized by body surface area (BSA) using the following equation: standardized TPA (mm{sup 2}/m{sup 2}) (stTPA) = TPA (mm{sup 2})/BSA (m{sup 2}). The fecal concentrations of representative microorganisms and organic acids also were measured. Results: A total of 127 patients undergoing hepatectomy (n = 48), pancreatoduodenectomy (n = 44), and esophagectomy (n = 35) were included. The fecal levels of predominant obligate anaerobes showed a positive correlation with stTPA, whereas that of pathogenic microorganisms showed a negative correlation with stTPA. The fecal concentrations of total short chain fatty acids (the sum of acetic acid, propionic acid, and butyric acid) also showed a positive correlation with stTPA. The stTPA was significantly lower in patients with positive microorganisms in the MLNs (patients with bacterial translocation) compared to those without microorganisms in the MLNs (p = 0.047). Conclusions: This study was the first to demonstrate the association between muscle mass and the fecal profile, as well as their association with bacterial translocation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Data for Catalyst and Reactor Design Considerations for Selective Production of Acids by Oxidative Cleavage of Alkenes with H2O2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η2-O2) complexes vs. H2O2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H2O2 concentrations. Semi-batch reactors with continuous introduction of H2O2 solutions offer the means to maintain low H2O2 concentrations while providing sufficient quantities of H2O2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. This kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H2O2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H2O2 feed rate increases selectivity towards oxidative cleavage products and selective use of H2O2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semi-batch reactors with optimized molar feed rates of H2O2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H2O2 selectivity (3% to 30%). In addition, semi-batch reaction conditions used avoid H2O2-mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H2O2.

Catalysis↗

An integrated process for butanol production from cellulosic biomass and CO 2 using engineered clostridia in a linear immobilized bioreactor

Engineered platforms using mixed microbial consortia to consolidate multiple reaction steps and perform disparate conversions simultaneously can substantially enhance the carbon efficiency of biomass conversion processes and lower the biofuel cost to an economically competitive level. In this project, an integrated process will be developed to produce n-butanol from cellulosic biomass and waste gas streams using two engineered clostridial strains, one butanol-tolerant solventogenic strain and one carboxydotrophic acetogen, co-immobilized in a “Linear Immobilized Bioreactor” (LIBR). The CO 2 and H 2 produced by the solventogenic strain will be used by the carboxydotrophic strain to produce acetate (and butyrate) that in turns can be used by the solventogenic strain to produce more butanol. Such a co-cultured fermentation has the potential to increase butanol production from biomass hydrolysate sugars by up to 50% with 100% reduction in CO 2 emission. Butanol produced in the fermentation will be stripped by the rising bubbles of fermentation produced gases (CO 2 and H 2 ) in the LIBR and separated via a condenser, alleviating butanol inhibition while achieving continuous butanol production at a high productivity and product titer, which can reduce both water and energy consumptions by over 50% compared to conventional ethanol and ABE fermentation processes. Phase I study proved the new bioprocess concept and verified our hypothesis that the proposed LIBR and co-cultured fermentation can enhance the conversion of lignocellulosic sugars to butanol with higher butanol yield, productivity and titer, leading to reduced biobutanol cost to compete more favorably with bioethanol and fossil fuels. A prototype lab-scale LIBR for multiphase fermentation was constructed to investigate and demonstrate the technical feasibility and advantages of the LIBR for multiphase fermentation involving sugars and gaseous substrates. The LIBR will be optimized and evaluated for its economic feasibility for biobutanol production from lignocellulosic biomass and industrial waste gases in Phase II.

09 BIOMASS FUELS↗

Biochemical Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels and Products: 2019 State of Technology and Future Research

The purpose of this report is to benchmark the latest experimental developments across a number of potential bioconversion pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this state of technology, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL’s recently-published 2018 biochemical design report focused on those two pathways. The models were run across three scenarios for lignin utilization, namely combustion, conversion to coproducts based on “base case” performance with biomass hydrolysate, and conversion to coproducts based on “high” performance demonstrated with model lignin monomer components.

09 BIOMASS FUELS↗