Search NASA⌕ Search

SEARCH · Search NASA

Results for “cellulose content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The molecular architecture distinctions between compression, opposite and normal wood of Pinus radiata

In gymnosperms compression wood is a specialised type of structural cell wall formed in response to biomechanical stresses. The differences in terms of gross structure, ultrastructure and chemistry are well-known. However, the differences between compression wood, normal wood, and opposite wood regarding the arrangements and interactions of the various polymers and water within their cell walls still needs to be established. The analysis of 13 C-labelled Pinus radiata by solid-state NMR spectroscopy and other complementary techniques revealed several new aspects of compression and opposite wood molecular architecture. Compared to normal wood, compression wood has a lower water content, its overall nanoporosity is reduced, and the water and matrix polymers have a lower molecular mobility. Galactan, which is a specific marker of compression wood, is broadly distributed within the cell wall, disordered, and not aligned with cellulose, and is found to be in close proximity to xylan. Dehydroabietic acid (a resin acid) is immobilised and close to the H-lignin only in compression wood. Although the overall molecular mobility of normal wood and opposite wood are similar, opposite wood has different arabinose conformations, a large increase in the amount of chain ends, contains significantly more galactan and has additional unassigned mobile components highlighting the different molecular arrangement of cell wall polymers in opposite and normal wood.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Viscosity Analysis of Battery Electrode Slurry

We report the effects of component ratios and mixing time on electrode slurry viscosity. Three component quantities were varied: active material (graphite), conductive material (carbon black), and polymer binder (carboxymethyl cellulose, CMC). The slurries demonstrated shear-thinning behavior, and suspension properties stabilized after a relatively short mixing duration. However, micrographs of the slurries suggested their internal structures did not stabilize after the same mixing time. Increasing the content of polymer binder CMC caused the greatest viscosity increase compared to that of carbon black and graphite.

25 ENERGY STORAGE↗
DOE OSTI2025

Hempseed cell wall polysaccharides are dominated by linear xylans and cellulose: Comprehensive structural profiling of ten cultivars of industrial hemp, Cannabis sativa L .

Hempseed is a rich source of dietary fiber; however, there has been limited research on the variability of carbohydrate composition in hempseed cell walls. The primary aim of this study was to conduct a comprehensive chemical and structural analysis of the cell wall polysaccharides in ten hempseed cultivars. Water-soluble polysaccharides (WSP) and water-insoluble residues (WIR) were isolated and subsequently analyzed for their monosaccharide composition using HPAEC-PAD, glycosyl linkage analysis using GC–MS, and structural characterization via NMR spectroscopy. All hempseed cultivars contained a high proportion of insoluble fibers and smaller amounts of soluble polysaccharides. Glucose and xylose were the most abundant components of the WIR fractions, while the WSP fractions contained abundant amounts of galactose, galacturonic acid, arabinose, rhamnose, and mannose. The results of linkage and spectroscopic analysis were consistent with the compositional analysis, identifying cellulose and acetylated linear xylans as primary components of WIR, and arabinogalactans, rhamnogalacturonans, heteromannans, xyloglucans, and arabinan as predominant in WSP. Altogether, the study revealed a comparable cell wall structure among the analyzed hemp seed varieties. The high fiber content of whole hempseed-based ingredients presents significant potential for food manufacturers seeking to develop products with enhanced dietary fiber content, offering both functional and nutritional benefits for consumers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Data from High Solids Loading Biorefinery for the Production of Cellulosic Sugars from Bioenergy Sorghum

A novel process applying high solids loading in chemical-free pretreatment and enzymatic hydrolysis was developed to produce sugars from bioenergy sorghum. Hydrothermal pretreatment with 50% solids loading was performed in a pilot scale continuous reactor followed by disc refining. Sugars were extracted from the enzymatic hydrolysis at 10% to 50% solids content using fed-batch operations. Three surfactants (Tween 80, PEG 4000, and PEG 6000) were evaluated to increase sugar yields. Hydrolysis using 2% PEG 4000 had the highest sugar yields. Glucose concentrations of 105, 130, and 147 g/L were obtained from the reaction at 30%, 40%, and 50% solids content, respectively. The maximum sugar concentration of the hydrolysate, including glucose and xylose, obtained was 232 g/L. Additionally, the glucose recovery (73.14%) was increased compared to that of the batch reaction (52.74%) by using two-stage enzymatic hydrolysis combined with fed-batch operation at 50% w/v solids content.

Conversion↗
DOE OSTI2025

Borate-assisted alkaline extraction of hemicellulose from switchgrass with enhanced structural stability and purity

Valorization of non-cellulosic polysaccharides is crucial for enhancing the economic competitiveness of biorefinery processes. In this study, a mixture of boric acid and sodium hydroxide was employed to efficiently extract hemicellulose from holocellulose switchgrass. Borate-assisted alkaline extraction resulted in a higher xylan content (59.5 %) compared to conventional alkaline extraction. Here, the hemicellulose fractions derived from the borate-alkaline treatment exhibited a higher molecular weight (M w = 51.2 kDa) and a relatively lower degree of polydispersity (1.28), indicating improved structural stability. The presence of borate had a protective effect against chain scission, preserving glucuronic acid residues and increasing galactose content. Additionally, borate improved hemicellulose purity, with up to 74.1 % of the extracted hemicellulose being suitable for further enzymatic applications. Extended extraction time further enhanced hemicellulose recovery, reaching 97.9 % under NaOH/boric acid conditions while maintaining structural integrity, as confirmed by SEM, FTIR and 2D HSQC NMR analyses. These findings provide insights into the role of borate in optimizing hemicellulose extraction and improving its potential for bioconversion processes.

Borate alkaline↗
DOE OSTI2023

Characterization of CNC Nanoparticles Prepared via Ultrasonic-Assisted Spray Drying and Their Application in Composite Films

The ultrasonic-assisted spray dryer, also known as a nano spray dryer and predominantly used on a lab scale in the pharmaceutical and food industries, enables the production of nanometer-sized particles. In this study, the nano spray dryer was applied to cellulosic materials, such as cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs). CNC suspensions were successfully dried, while the CNF suspensions could not be dried, attributable to their longer fibril lengths. The nano spray drying process was performed under different drying conditions, including nebulizer hole sizes, solid concentrations, and gas flow rates. It was confirmed that the individual particle size of nano spray-dried CNCs (nano SDCNCs) decreased as the nebulizer hole sizes and solid contents of the suspensions decreased. The production rate of the nano spray dryer increased with higher solid contents and lower gas flow rates. The resulting nano SDCNCs were added to a polyvinyl alcohol (PVA) matrix as a reinforcing material to evaluate their reinforcement behavior in a plastic matrix using solvent casting. After incorporating the 20 wt.% nano SDCNCs into the PVA matrix, the tensile strength and tensile modulus elasticity of the neat PVA nanocomposite film increased by 22% and 32%, respectively, while preserving the transparency of the films.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Strengthening poly(lactic acid) composites with poly(methyl methacrylate) functionalized flax nanofibrils

Biobased reinforcements for poly(lactic acid) (PLA) are needed for more additive manufacturing applications requiring higher strength and sustainability. Flax nanofibrils (FNFs) produced through mechanical refining were explored as a lower energy alternative to cellulose nanofibril (CNF) reinforcements. To compatibilize the FNFs for the PLA matrix, a grafting-through surfactant free emulsion polymerization (SFEP) was performed to functionalize the FNF surface with poly(methyl methacrylate) (PMMA). FNFs produced using different refining energy were functionalized under varying solid contents in suspension. Polymerizations performed at 0.7 wt% FNFs in water yielded the highest degree of PMMA functionality. These optimal conditions were scaled up and the PMMA modified FNFs melt compounded into PLA yielding a 12% increase in tensile strength and 92% increase in the modulus of elasticity as compared to the original PLA. Interestingly, the FNFs with the lowest refining energy yielded the strongest composites using these methods, surpassing the higher refining energy CNF reinforcements. This increase was attributed to improved dispersion of the FNF reinforcements in the PLA matrix that was enabled by the PMMA coating on the FNF surface preventing interfibrillar adhesion and aggregation within the PLA matrix.

Mulligan, Abigail [University of Maine]↗
DOE OSTI2021

Hydrothermal pretreatment for valorization of genetically engineered bioenergy crop for lipid and cellulosic sugar recovery

Lipids accumulated in the vegetative tissues of cellulosic feedstocks can be a potential raw material for biodiesel and bioethanol production. In this work, bagasse of genetically engineered sorghum was subjected to liquid hot-water pretreatment at 170, 180, and 190°C for different reaction time. Under the optimal pretreatment condition (170°C, 20 min), the residue was enriched in glucan (57.39 ± 2.63 % w/w) and xylan (13.38 ± 0.49 % w/w). The total lipid content of the pretreated residue was 6.81% w/w, similar to that observed in untreated bagasse (6.30% w/w). Pretreatment improved the enzymatic digestibility of bagasse, allowing a recovery of 79% w/w and 86% w/w of glucose and xylose, respectively. The pretreatment and enzymatic saccharification resulted in a 2-fold increase in total lipid in enzymatic residue compared to the original bagasse. Furthermore, pretreatment and enzymatic hydrolysis enabled high sugar recovery while concentrating triglycerides and free fatty acids in the residue.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

One-pot ethanol production under optimized pretreatment conditions using agave bagasse at high solids loading with low-cost biocompatible protic ionic liquid

Agave bagasse (AG) is a potential bioenergy feedstock due to its high biomass productivity, even in semiarid lands. In particular, ionic liquid (IL) pretreatment using aprotic ILs (AILs) has greatly reduced AG recalcitrance towards downstream processing by lowering lignin content and achieving high sugar yields. However, AIL's low biocompatibility towards enzymes and bacteria combined with the high initial cost has limited further development of this technology. In a wash-free one-pot (OP) ethanol conversion process, the evaluation of AG pretreatment with a biocompatible low-cost protic IL (PIL), 2-hydroxyethylammonium acetate ([2-HEA][OAc]) was achieved, where PIL pretreatment was followed by enzymatic saccharification, then ethanol fermentation in a single vessel. The pretreatment conditions were optimized using a central composite design to enable high sugar conversion at low PIL content. Under optimized pretreatment conditions (160 °C, 60% IL loading and 1.5 h), a yield of 132 kg of ethanol per Ton of untreated biomass was estimated using high solids loading (30% solids loading) under a PIL-OP scheme. High lignin removal (>50%), a decreased cellulose crystallinity, and high glucan conversion (>85%) were achieved with PIL-pretreated AG comparable to yields obtained in an AIL-AG pretreated sample using 1-ethyl-3-methyl-imidazolium acetate ([C 2 C 1 Im][OAc]). Here, these results using [2-HEA][OAc] demonstrate the potential of AG in an OP scheme with improved total ethanol yields paving the way towards a more feasible IL-based biorefinery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Use of Ionic Liquids for Hemp Fiber Degumming

Degumming or retting to remove pectin, lignin, and hemicellulose is a critical step in the production of high-quality hemp fibers. Current technologies, including traditional water or dew retting, as well as chemical, enzymatic, and physical degumming processes, have inherent environmental risks and produce fibers of varying qualities. Herein we explore the use of an ionic liquid (IL) capable of dissolving pectin, lignin, and hemicellulose, but not cellulose, in combination with different oxidating agents to degum hemp. In this study, we observed that treating raw hemp fibers with the IL choline acetate ([Cho][OAc]), alone or in combination with aqueous H 2 O 2 , led to a reduction in the gummy materials and lignin content of the resulting samples of up to 63 and 78%, respectively. More importantly, the high crystallinity and low reduction in tensile strength of the resulting fibers make these novel and relatively simple IL-based processes promising alternatives toward the sustainable preparation of hemp-based materials suitable for use in the textile industry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Mineral-Ground Micro-Fibrillated Cellulose Reinforcement for Polymer Compounds

Additive Manufacturing (AM) is quickly becoming a mainstream, energy efficient manufacturing technique for complex and custom components. ORNL has taken polymer AM into the next level with Big Area Additive Manufacturing (BAAM). However, we need to develop the strength of AM materials (specifically polymers) to satisfy the mechanical requirements of structural parts. Also, it is crucial that the developed process can easily be scaled up to have a significant impact in the manufacturing industry of US. Furthermore, renewable, bio-derived AM materials are desirable from a sustainability perspective. In the first phase of this project the mechanical properties of polymer AM components were significantly improved developing a micro fibrillated cellulose (MFC)-reinforced composite material system that is derived from biomass and compatible with BAAM. Unfortunately, the improvements were observed only with freeze-dried MFCs, and freeze-drying is a very slow process and is not industrially scalable. Furthermore, MFCs were not available in large quantities at low cost. However, FiberLean has reached 12,000 tons/year capacity (60,000 tons/year including the minerals). FiberLean offers MFCs at a scale and order of magnitude lower price than current market participants. With their recently developed novel (patent pending) drying process FiberLean can achieve over 50% solid content commercially. In the 2nd phase of the project, the original objective was to investigate this new novel drying process along with compounding with different formulations to optimize and adapt to large scale additive manufacturing. However, the compounded materials prepared via this approach were very brittle and demonstrated poor mechanical performance. Therefore, the project was focused more on a scalable chemical surface modification of MFCs to enable their drying via conventional oven process with minimal agglomeration and better dispersion in PLA polymer matrix. Fiberlean and ORNL have worked together in this project to develop mineral-ground microfibrillated cellulose (MFC) - reinforced additive manufacturing feedstock materials with significantly improved mechanical properties. Properly surface modified and dried Fiberlean cellulose microfibrils led to tensile strength increases up to ~40% and elastic modulus increases up to 70% with the addition of 30% MFC into PLA matrix. The work has led to a high impact journal article and a provisional patent. Opportunities for a follow up work to demonstrate the technology in large scale and application of it to AM applications are currently being searched.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low-chromophore lignin isolation from natural biomass with polyol-based deep eutectic solvents

When attempting to obtain light-color lignin from lignocellulosic biomass or industrial lignin, the available options based on chemical or morphological modification suffer from low yield, high cost, and lack of availability at the required scales. In this study, we adopted a polyhydric-alcohol-based deep eutectic solvent (PA-DES) to directly extract light-color lignin from natural biomass, which is even whiter than native cellulolytic enzyme lignin (CEL). The isolated lignin possessed a high recovery yield (97.36%), regular micro-spherical morphology, enriched β-ether linkage of 58/100Ar, low phenolic hydroxyl content of 1.25 mmol g -1 , minimal carbonyl content of 0.70 mmol g -1 , and less condensed structures, thus yielding a lower content of chromophores. Further, this lignin showed excellent sunscreen effects, which could enhance the SPF of a commercial sunscreen from 15 to 40 with only 5 wt% addition. This study can provide essential guidance for the scale-up production of light-color lignin and obtaining near-complete digestible cellulose for further saccharification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

δ 2 H isotopic offsets in xylem water measurements under cryogenic vacuum distillation: Quantifying and correcting wood‐water hydrogen exchange influences

Stable isotopes δ 18 O and δ 2 H are used to infer vegetation water sources. In some studies, significant xylem water δ 2 H offsets from potential source waters have been observed. The offsets appear to be more prevalent with cryogenic vacuum distillation (CVD) of plant water. Hypothesized mechanisms for these offsets include changes during plant water uptake and transport, and methodological problems. We propose that a large portion of the offsets are due to hydrogen isotope exchange between xylem water and non-crystalline hydroxyl groups of wood cellulose and hemicellulose during CVD. We present a method for estimating the hypothesized isotopic exchange between wood tissues and water, which is the result of Rayleigh and equilibrium fractionation. To estimate the exchange, we use published wood properties for North American tree species and isotope chemical relationships as a function of moisture content, CVD temperature and water extraction efficiency. A simple model of exchange between xylem water and hydroxyl groups captures the range of observations in studies in which CVD and non-CVD methods were compared. To evaluate the model, we compared observed δ 2 H offsets (sw-excess) values from two field datasets (90°C, n = 364, and 170°C, n = 43) to δ 2 H offsets estimated with our chemical model. We found good agreement between observed and estimated δ 2 H offsets for samples extracted at 90°C (r 2 = 0.69) but not for samples extracted at 170°C (r 2 = 0.20). The offset may be eliminated by increasing the extraction temperature to 229°C or by adding a standard sufficient to raise the moisture content to >150%. A correction can also be approximated by applying a theoretical calculation based on the extraction temperature, moisture content and water extraction efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Low-abundance populations distinguish microbiome performance in plant cell wall deconstruction

Abstract Background Plant cell walls are interwoven structures recalcitrant to degradation. Native and adapted microbiomes can be particularly effective at plant cell wall deconstruction. Although most understanding of biological cell wall deconstruction has been obtained from isolates, cultivated microbiomes that break down cell walls have emerged as new sources for biotechnologically relevant microbes and enzymes. These microbiomes provide a unique resource to identify key interacting functional microbial groups and to guide the design of specialized synthetic microbial communities. Results To establish a system assessing comparative microbiome performance, parallel microbiomes were cultivated on sorghum ( Sorghum bicolor L. Moench) from compost inocula. Biomass loss and biochemical assays indicated that these microbiomes diverged in their ability to deconstruct biomass. Network reconstructions from gene expression dynamics identified key groups and potential interactions within the adapted sorghum-degrading communities, including Actinotalea , Filomicrobium , and Gemmatimonadetes populations. Functional analysis demonstrated that the microbiomes proceeded through successive stages that are linked to enzymes that deconstruct plant cell wall polymers. The combination of network and functional analysis highlighted the importance of cellulose-degrading Actinobacteria in differentiating the performance of these microbiomes. Conclusions The two-tier cultivation of compost-derived microbiomes on sorghum led to the establishment of microbiomes for which community structure and performance could be assessed. The work reinforces the observation that subtle differences in community composition and the genomic content of strains may lead to significant differences in community performance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Protoplast fusion as a strategy to increase ploidy in Rhodotorula toruloides for strain development

Rhodotorula toruloides is a red oleaginous yeast with growing commercial interest because of its hardiness and exceptional lipid production capacity. Because it is a basidiomycete yeast with a complex life cycle, many of the classical breeding methods used with ascomycetes are unavailable for strain improvement. However, we have been able to construct polyploid yeast by fusing protoplasts of parents with the same mating type. Fusing of Y-6985 (A2) and Y-48190 (A2), which had been transformed with complementary antibiotic markers, led to the recovery of two diploids and one triploid. The stability of the fusion yeasts was tested by plating them on non-selective medium after several growth cycles under antibiotics and then testing five colonies per strain for nuclear DNA contents using flow cytometry and standard cell cycle analysis: the triploid and one diploid were stable. Fusants inherited their mitochondria from a single parent, which was demonstrated using restriction fragment length polymorphism (RFLP) of mitochondrial DNA. The phenotypic properties of the parents and fusants were compared in glucose fed-batch bioreactor studies and cellulosic sugar batch cultures. The final lipid titers for the fed-batch cultures were 24.9–39.7 g/L with Y-6985 and the diploid and triploid performing the best and worst, respectively. The fusants demonstrated intermediate hardiness for growth on hydrolysate prepared with dilute-acid pretreated switchgrass and were outperformed by Y-48190. Unlike one of the haploid parents, the fusants grew in 70% v/v concentrated hydrolysate. Furthermore, they did not grow as fast as the other haploid. In this study, a modernized protoplast fusion method is resurrected a useful tool for strain development in this yeast, which is complementary with other available methods.

Lignocellulose↗
DOE OSTI2022

Novel Amorphous Carbons for the Adsorption of Phosphate: Part I. Elucidation of Chemical Structure of N-Metal-Doped Chars

Due to phosphate’s necessity in agriculture and its danger to the environment, the development of adsorbents for its removal has been the subject of intensive research activity. Although the introduction of nitrogen functionality to chars and modification of biochar with metals have proven to change the character of the char structure, making it more active toward nutrients, there is no study regarding the doping of biochar with metals and nitrogen simultaneously for the adsorption of phosphates. This paper is the first of two in which we report the production, characterization, and evaluation of N-metal-doped biochars from cellulose for phosphate removal from liquid effluents. In this part, we describe the production and characterization of N-Ca-, N-Fe-, and N-Mg-doped biochars. The elemental composition and surface area of each of the materials produced is reported. Elemental and surface characterization of the chars are reported with the largest N content appearing at a temperature of 800 °C (12.5 wt %) and a maximum surface area for biochar produced at 900 °C (1314 m2/g). All of the adsorbents were visualized by scanning electron microscope (SEM), confirming that although there are some crystals on the surface of the biochar produced, most of the N, Mg, and Ca are part of the polyaromatic ring structure. Transmission electron microscope (TEM) images clearly show the formation of nanoclusters with the metals in the case of N-Fe and N-Ca biochars. The N-Mg biochars show a uniform distribution of the Mg through the carbon surface. X-ray photoelectron spectroscopy (XPS) studies of the biochars produced with metals and varying nitrogen levels clearly show Mg and Ca peaks shifting their position in the presence of N, suggesting the formation of stable structures between metals and N in the carbon polyaromatic ring system. To elucidate the nature of these structures, we conducted DFT-based calculations on different configurations of the nitrogenated structures. The calculated binding energy shifts were found to closely match the XPS experimental binding energy, confirming the likelihood of these structures in biochar. Finally, based on our experimental and modeling results, we hypothesize that an important fraction of the Mg and Ca is introduced to these biochars at the edges. Another fraction of Mg and Ca is in the form of phthalocyanine-like internal structures. More experimental studies are needed to confirm the formation of these very interesting structures and their potential use as adsorbents or catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Using Chemical Reactor Models to Predict Fluidized Bed Pyrolysis Yields of Biomass Feedstocks

A detailed biomass pyrolysis kinetics scheme is implemented in reduced-order reactor models to predict chemical species yields from a fluidized bed reactor. The biomass composition in terms of cellulose, hemicellulose, lignins, and extractives are determined for several biomass feedstocks. Model results are compared to yields measured from a two-inch diameter bench-scale fluidized bed reactor operating at fast pyrolysis conditions. The reduced-order chemical reactor models compare favorably with the experimental measurements and capture trends in product yields due to biomass compositional effects such as high ash content. This work offers a computationally inexpensive approach to predict the quality of biomass pyrolysis products in a timely manner. Source code for the reactor models along with a biomass composition web tool are made available online for future scientific research efforts.

09 BIOMASS FUELS↗
DOE OSTI2021

Data for Hydrothermal Pretreatment for Valorization of Genetically Engineered Bioenergy Crop for Lipid and Cellulosic Sugar Recovery

Lipids accumulated in the vegetative tissues of cellulosic feedstocks can be a potential raw material for biodiesel and bioethanol production. In this work, bagasse of genetically engineered sorghum was subjected to liquid hot-water pretreatment at 170, 180, and 190 °C for different reaction time. Under the optimal pretreatment condition (170 °C, 20 min), the residue was enriched in glucan (57.39 ± 2.63 % w/w) and xylan (13.38 ± 0.49 % w/w). The total lipid content of the pretreated residue was 6.81% w/w, similar to that observed in untreated bagasse (6.30% w/w). Pretreatment improved the enzymatic digestibility of bagasse, allowing a recovery of 79% w/w and 86% w/w of glucose and xylose, respectively. The pretreatment and enzymatic saccharification resulted in a 2-fold increase in total lipid in enzymatic residue compared to the original bagasse. Thus, pretreatment and enzymatic hydrolysis enabled high sugar recovery while concentrating triglycerides and free fatty acids in the residue.

Conversion↗