Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Stabilization and Control of Rheological Properties of Fe2O3/Al(OH)(3)-rich Colloidal Slurries Under High Ionic Strength and pH

Controlling the stability and rheological properties of colloidal slurries has been an important but challenging issue for various applications such as cosmetics, ceramic processing, and nuclear waste treatment. For example, at the Department of Energy (DOE) Hanford and Savannah River sites, operation of the waste treatment facilities with increased solids loading affects waste processing rates but impacts the rheological properties. We investigated various rheological modifiers on a Fe2O3-rich nuclear waste simulant, characterized by high ionic strength and pH, in order to reduce rheological properties of the colloidal slurry. Rheological modifiers change particle interactions in colloidal slurries; they mainly alter the electrostatic and steric interactions between particles, leading to a change in rheological properties. Weak acid type rheological modifiers strengthen electrostatic repulsion whereas nonionic/polymer surfactant type rheological modifiers introduce a steric repulsion. Using rheological analysis, it was found that citric acid and polyacrylic acid are good rheological modifiers for the simulant tested, effectively reducing yield stresses by as much as 70%. Further analysis supports that addition of such rheological modifiers increases the stability of the slurry. Binding cations in bulk solution and adsorption on the surface of the particles are identified as a reasonable working mechanism for citric acid and polyacrylic acid.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-temperature X-ray analysis of phase evolution in lithium ion conductor Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3}

Series of Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} glass ceramic samples were prepared in this work through the change of heat treatment temperature from 650 to 1050 °C. The structures of glass ceramic samples were characterized by means of high temperature X-ray diffraction and Field Emission Scanning Electron Microscope. And the lithium ionic conductivity was analyzed through AC impedance spectroscopy. Through heat treatment at 850 °C for 4 h for the base glass sample, we obtained a maximum conductivity of 5.8 × 10{sup −4} S/cm at room temperature. - Graphical Abstract: High temperature X-ray diffraction (HT-XRD) and Rietveld refinement of Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} (LAGP) glass-ceramics were recorded to investigate the phase transformation, cell parameters and the mass fraction of each crystal phase, which occur in the glass to glass-ceramics process during different crystallization temperatures. The relationship between the average grain size and conductivity that originate from and relate to the crystallization temperature was analyzed by SEM micrograph and AC impedance spectroscopy. - Highlights: • Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} glass-ceramics were prepared from as-prepared glass. • The phases decomposition and mass fraction of each phase were analyzed by HT-XRD. • Conductivity is relate to grain size that influenced by crystallization temperature.

36 MATERIALS SCIENCE↗

Preparing Li-garnet electrodes with engineered structures by phase inversion and high shear compaction processes

We report solid-state lithium batteries are promising for safety and energy density com-pared with traditional lithium-ion batteries. However, the large interfacial resistance between the electrode and electrolyte is a bottleneck to achieving high-performance solid-state batteries. Engineered electrode structures with a porous scaffold of the solid electrolyte material are promising to lower the interfacial resistance and provide a mechanical support for a thin solid electrolyte layer. In this work, two ceramic processing techniques are used to fabricate porous/dense bilayer architectures based on a Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Li-garnet material. Finger-like vertically aligned pores are created by the phase inversion (PI) process. A water bath presaturated with Li salt prevents Li loss during the PI solvent exchange step. Pore size and porosity can be optimized by adjusting the bath temperature. The high shear compaction process was used to prepare LLZO tapes with 40, 60, and 80 vol% poreformer. The porosity of the tapes after sintering is 39.5%, 58.4%, and 75.4%, respectively. Microtomography exhibits the porosity, pore shape, and pore distribution of the tapes. A typical cathode material LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC) is filled into the pores via vacuum infiltration, and a dense cathode layer is formed within the garnet scaffold.

25 ENERGY STORAGE↗

Stabilized Alumina/Ethanol Colloidal Dispersion for Seeding High Temperature Air Flows

Seeding air flows with particles to enable measurements of gas velocities via laser anemometry and/or particle image velocimetry techniques can be quite exasperating. The seeding requirements are compounded when high temperature environments are encountered and special care must be used in selecting a refractory seed material. The pH stabilization techniques commonly employed in ceramic processing are used to obtain stable dispersions for generating aerosols of refractory seed material. By adding submicron alumina particles to a preadjusted pH solution of ethanol, a stable dispersion is obtained which when atomized produces a high quality aerosol. Commercial grade alumina powder is used with a moderate size distribution. The technique is not limited to alumina/ethanol and is also demonstrated with an alumina/H2O system. Other ceramic powders in various polar solvents could also be used once the point of zero charge (pH(sub pzc)) of the powder in the solvent has been determined.

Wernet, Judith H.↗

Dielectric, ferromagnetic and maganetoelectric properties of BaTiO{sub 3}–Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} composite ceramics

Graphical abstract: - Highlights: • The lead-free ME ceramic composites BaTiO{sub 3}–Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} were successfully synthesized. • The composites showed high dielectric constant and low dielectric loss. • The composite with 30% NiZn ferrite presented good soft magnetic properties and ME performance. - Abstract: Lead-free magnetoelectric composite ceramics (1 − x)BaTiO{sub 3}–xNi{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} (x = 0.15, 0.3, 0.45) were successfully prepared by conventional oxide ceramic process. The tetragonal perovskite BaTiO{sub 3} and cubic spinel Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} were confirmed by X-ray diffraction. The dielectric behaviors of all composite samples show a normal response to the increasing measurement frequency and Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} ferrite content. Well defined ferromagnetic hysteresis loops and obvious magnetoelectric coupling effect are observed in the composite ceramics. The influence of applied dc bias magnetic field and Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} ferrite content on the magnetoelectric coupling responding voltage is investigated. The strongest peak magnetoelectric coupling voltage coefficient is 124 μV/cm Oe when x = 0.3, which corresponds to the maximum magnetoelectric coupling responding voltage of 200 μV.

36 MATERIALS SCIENCE↗

Effects of MnO doping on the electronic properties of zinc oxide: 406 GHz electron paramagnetic resonance spectroscopy and Newman superposition model analysis

MnO-doped ZnO ceramics have been synthesized through the conventional ceramic processing route. Mn{sup 2+} ions have been incorporated into the ZnO lattice within the limits of solid solubility. By using X-band-frequency and high-field electron paramagnetic resonance (EPR), we have resolved some of the main electronic transitions for the S = 5/2, I = 5/2 high-spin system and have determined accurately the EPR spin-Hamiltonian parameters. By combining data from crystallographic X-ray diffraction and EPR with the semi-empirical Newman superposition model, we have found the local configurational position of Mn{sup 2+} and have confirmed the symmetry of the lattice. The results presented in this contribution indicate that Mn ions substitute at Zn sites in ZnO. The effect of Mn{sup 2+} ions on the intrinsic defects becomes remarkable, thus the vacancy related intrinsic defect signals cannot be visible in the EPR spectrum. MnO doping affects the band gap energy of ZnO system which was confirmed via UV-Vis spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanostructured gadolinium-doped ceria microsphere synthesis from ion exchange resin: Multi-scale in-situ studies of solid solution formation

In the current nano-sized material revolution, the main limitations to a large-scale deployment of nanomaterials involve health concerns related to nano-dissemination via air. Developing new chemical routes benefiting from nano-size advantages while avoiding their hazards could overcome these limitations. Addressing this need, a chemical route leading to soft nano-particle agglomerates, i.e., macroscopic precursors presenting the ability to be decomposed into nano-sized materials, was developed and applied to Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ}. Using cerium/gadolinium-loaded ion exchange resin, the Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ} solid solution formation as a function of temperature was studied in-situ through X-ray diffraction, X-ray absorption spectroscopy and Raman spectroscopy. Temperatures corresponding to the organic skeleton decomposition and to the mixed oxide crystallization were identified. An optimal heat treatment, leading to nanostructured soft agglomerates, was established. Microsphere processing capabilities were evaluated and particle size distribution measurements were recorded. A very low fracture strength was calculated, and a nanometric particle size distribution (170 nm) was determined. - Graphical abstract: The elaboration of micro-spherical precursors leading to the formation of nano-oxide soft agglomerates was studied and approved through the use of ion exchange resin loaded with cerium and gadolinium. The formation of the solid solution was followed through in-situ measurements such as XAS, XRD, Raman, TGA and DSC. Key temperatures were identified for the formation of the mixed-oxide. Following this study, the microstructure and particle size of oxide microspheres formed highlight the formation of soft nano-arrangments. - Highlights: • Soft microspherical agglomerates able to be decomposed into nano-sized materials. • In situ study of cerium/gadolinium-loaded ion exchange resin conversion in oxide. • In situ multi-scale study through Raman spectroscopy, XAS and HT-XRD. • Monodisperse nanometric particle synthesis suitable for ceramic processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Particle Size Distribution on Slurry Rheology: Nuclear Waste Simulant Slurries

Controlling the rheological properties of slurries has been of great interest in various industries such as cosmetics, ceramic processing, and nuclear waste treatment. Many physicochemical parameters, such as particle size, pH, ionic strength, and mass/volume fraction of particles, can influence the rheological properties of slurry. Among such parameters, the particle size distribution of slurry would be especially important for nuclear waste treatment because most nuclear waste slurries show a broad particle size distribution. We studied the rheological properties of several different low activity waste nuclear simulant slurries having different particle size distributions under high salt and high pH conditions. Using rheological and particle size analysis, it was found that the percentage of colloid-sized particles in slurry appears to be a key factor for rheological characteristics and the efficiency of rheological modifiers. This behavior was shown to be coupled with an existing electrostatic interaction between particles under a low salt concentration. Our study suggests that one may need to implement the particle size distribution as a critical factor to understand and control rheological properties in nuclear waste treatment plants, such as the U.S. Department of Energy’s Hanford and Savannah River sites, because the particle size distributions significantly vary over different types of nuclear waste slurries.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Engineering New Catalysts for In-Process Elimination of Tars

The key objective of this project was to develop a new and more efficient methodology for engineering and economically producing optimized robust catalysts for the reduction or elimination of tars in biomass gasification. Whereas current catalyst technology typically disposes thin layers of catalytically-active material onto rigid supports via wet chemistry-based methods, this project investigated novel thermal methods for directly incorporating catalytically active materials onto robust supports as well as novel approaches for incorporating catalytically active materials on and/or within an otherwise inert refractory support material which is then subsequently formed and processed to create a catalytically-active material on all exposed surfaces. Specifically, the focus of this engineered catalyst development was on materials which were derived from, or otherwise related to, olivine-like minerals, due to the inherent attrition resistance and moderate catalytic properties exhibited by natural olivine when used in a fluidized bed biomass gasifier. Task 1 of this project successfully demonstrated the direct thermal impregnation of catalytically-active materials onto an olivine substrate, with the production of a Ni-olivine catalyst. Nickel and nickel oxide were thermally impregnated onto an olivine substrate and when reduced were shown to demonstrate improved catalytic activity over the baseline olivine material and equal the tar-decomposing performance of Ni-olivine catalysts prepared by conventional wet impregnation. Task 2 involved coordination with our subcontracted project partners to further develop and characterize catalyst formulations and to optimize activity and production methods. Within this task, several significant new materials were developed. NexTech Materials developed a sintered ceramic nickel-magnesium-silicate catalyst that demonstrated superb catalytic activity and high resistance to deactivation by H2S. Alfred University developed both supported and integrated (bulk) catalysts via a glass-ceramic processing route which were shown to exhibit excellent catalytic activity and superior resistance to attrition deactivation. With the discovery of these active, robust, glass-based catalysts, and with the permission of the project officer, the investigation of waste-based materials as originally proposed for Task 3 and pilot-scale testing proposed in Task 5 were deferred indefinitely in favor of further investigation of the glass-ceramic based catalyst materials. This choice was justified in part because during FY 2006 and through FY 2007, funding restrictions imposed by congressional budget choices significantly reduced funding for DOE biomass-related projects. Funding for this project was limited to what had been authorized which slowed the pace of project work at GTI so that our project partners could continue in their work. Thereafter, project work was allowed to resume and with restored funding, the project continued and concentrated on the development and testing of glass-ceramic catalysts in bulk or supported formats. Work concluded with a final development devoted to increasing the surface area of glass-ceramic catalysts in the form of microspheres. Following that development, project reporting was completed and the project was concluded.

03 NATURAL GAS↗

Increase in the Tb{sup 3+} green emission in SiO{sub 2}-LaF{sub 3} nano-glass-ceramics by codoping with Dy{sup 3+} ions

95SiO{sub 2}-5LaF{sub 3} sol-gel derived nano-glass-ceramics single doped with 0.1Dy{sup 3+} or 0.1Tb{sup 3+} mol % and codoped with 0.1Dy{sup 3+} and xTb{sup 3+} (x=0.1,0.3) mol % were successfully obtained. XRD and HRTEM measurements confirm the precipitation of LaF{sub 3} nanocrystals during the ceramming process, with mean size ranging from 10 to 20 nm and increasing with the thermal treatment temperature. About 75% of lanthanide ions are partitioned into LaF{sub 3} nanocrystals, as calculated from luminescence decays. The effect of increasing the Tb{sup 3+} concentration and also of codoping with Dy{sup 3+} in the Tb{sup 3+} green emission from the {sup 5}D{sub 4} level have been studied. The energy transfer mechanisms between Tb{sup 3+} ions and also between Tb{sup 3+}-Dy{sup 3+} ions, which favor the green emission, have been analyzed.

36 MATERIALS SCIENCE↗

Comparison of structural and magnetic properties of Zn{sub x}Mg{sub 1.5-x}Mn{sub 0.5}FeO{sub 4} and MgAl{sub x}Cr{sub x}Fe{sub 2-2x}O{sub 4} spinel oxides

The spinel oxides Zn{sub x}Mg{sub 1.5-x}Mn{sub 0.5}FeO{sub 4} (x = 0.0 to 0.6) and MgAl{sub x}Cr{sub x}Fe{sub 2-2x}O{sub 4} (x = 0.0 to 0.6) abbreviated as ZMMFO and MACFO respectively, were synthesized by standard ceramic processing. The compositional purity of all the specimens was checked by EDAX technique. The X-ray diffractometry was employed to determine the lattice constants and distribution of cations in the interstitial voids. The initial decrease of cell edge parameter (a) for ZMMFO up to x = 0.2 and thereafter expected rise in the ‘a’ and the initial slower rate of reduction in the lattice constant for MACFO are explained as basic of cation occupancy. The magnetic ordering in both systems is explained by invoking statistical canting models. The compositional variation of magneton number (n{sub B}) for ZMMFO could be very well explained by Localized canting of spin (LCS) model while Random canting of spin (RCS) model was used for MACFO system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and Magnetic Properties of Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} Hexaferrites

Magnetoplumbite-type (M-type) barium ferrites doped with different Y–Co doping content Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) were successfully prepared by ceramic process and investigated in this paper for the first time. X-ray diffraction were used to analyze the phase of the prepared sample. The scanning electron microscopy (SEM) was used to measure the morphology, and magnetic properties were measured by vibrating sample magnetometer (VSM). The results of XRD show that the single phase of M-type barium ferrites was obtained with the increase of Co content (x), but α-Fe{sub 2}O{sub 3} occurred when x exceeds 0.3. The SEM results exhibit the uniform plane hexagonal structures of M-type ferrites with all range of Co doping content. VSM results display that magnetization (M{sub s}) and coercivity (H{sub c}) show the same tendency that their values first increase and then decrease with the increase of Co content.

36 MATERIALS SCIENCE↗

Influence of secondary phases on phase and microwave dielectric properties of new Ca{sub 2}Ce{sub 2}Ti{sub 5}O{sub 16} ceramics

Ca{sub 2}Ce{sub 2}Ti{sub 5}O{sub 16} ceramics processed via mix oxide route was investigated. Phase composition and microwave dielectric properties were measured using X-ray diffraction and a cavity method, respectively. CeO{sub 2} and another unidentified phase (that vanishes at ≥1400°C) existed as secondary phases along with the parent Ca{sub 2}Ce{sub 2}Ti{sub 5}O{sub 16} phase. The amount of the parent Ca{sub 2}Ce{sub 2}Ti{sub 5}O{sub 16} phase increased with increasing sintering temperature from 1350°C to 1450 °C accompanied by a decrease in the apparent density. The density decreased but ε{sub r} and Qufo increased with sintering temperature. An ε{sub r} ∼87.2, Qufo ∼5915 GHz and τ{sub f} ∼219 GHz was achieved for the sample sintered at 1450°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and electrochemical investigation of Li2CoPO4F cathode material for lithium-ion batteries

We report the electrochemical characteristics of a novel cathode material Li2CoPO4F/C, which was prepared via a ceramic process. In cyclic voltammetry (CV) measurements, two reactions taking place at 4.81V and 5.12 V in the first anodic scan evolve to one broad oxidative peak in the subsequent cycles. This shape change of CV curves demonstrates that the charge/discharge mechanism is varied after the first charge. Correspondingly the XRD pattern of Li2CoPO4F shows a minor difference after discharge from 5.5 V. Further experimental results prove that this change is associated with the second reaction peaked at 5.12 V. In the constant current cycling measurement, the prepared Li2CoPO4F exhibits a reversible capacity of 109 mAh/g between 2.0 and 5.5 V. The discharge capacity keeps stable in the first 12 cycles accompanied by the serious electrolyte decomposition between the interface of electrolyte and Li2CoPO4F.

25 ENERGY STORAGE↗

Continuing the Validation of CCIM Processability for Glass Ceramic HLLW Forms: Plan for Test AFY14CCIM-GC1

This test plan covers test AFY14CCIM-GC1which is the first of two scheduled FY-2014 test runs involving glass ceramic waste forms in the Idaho National Laboratory’s Cold Crucible Induction Melter Pilot Plant. The test plan is based on the successes and challenges of previous tests performed in FY-2012 and FY-2013. The purpose of this test is to continue to collect data for validating the glass ceramic High Level Liquid Waste form processability advantages using Cold Crucible Induction Melter technology. The major objective of AFYCCIM-GC1 is to complete additional proposed crucible pouring and post tapping controlled cooling experiments not completed during previous tests due to crucible drain failure. This is necessary to qualify that no heat treatments in standard waste disposal canisters are necessary for the operational scale production of glass ceramic waste forms. Other objectives include the production and post-test analysis of surrogate waste forms made from separate pours into the same graphite mold canister, testing the robustness of an upgraded crucible bottom drain and drain heater assembly, testing the effectiveness of inductive melt initiation using a resistive starter ring with a square wave configuration, and observing the tapped molten flow behavior in pans with areas identical to standard High Level Waste disposal canisters. Testing conditions, the surrogate waste composition, key testing steps, testing parameters, and sampling and analysis requirements are defined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In vitro cytotoxicity tests of ZnO‐Bi{sub 2}O{sub 3}‐Mn{sub 2}O{sub 3}-based varistor fabricated from ZnO micro and nanoparticle powders on L929 mouse cells

The present study investigated the cytotoxicity of ZnO‐Bi{sub 2}O{sub 3}‐Mn{sub 2}O{sub 3}-varistors. To this effect, ZnO‐Bi{sub 2}O{sub 3}‐Mn{sub 2}O{sub 3} varistors fabricated from ZnO micro-and nanoparticle powders are prepared via conventional ceramic processing method. The effects of ZnO particle size on the properties of ZnO varistors are also investigated. The strong solid-state reaction during sintering may be attributed to the high surface area of the 20 nm ZnO nanoparticles that promote strong surface reaction. The intensity of XRD peaks reflected the high degree of crystallinity of the ZnO nanoparticles. However, the width of the peaks in case of ZnO nanoparticles has increased due to the quantum size effect. The cytotoxicity evaluation of ZnO varistor was conducted on mouse connective tissue fibroblast cells (L929) using Trypan Blue Exclusion Assay analysis. The results show that the four types of varistor samples lead to cellular mitochondrial dysfunction, morphological modifications and apoptosis at the various concentration range and the toxic effects are obviously displayed in high concentration samples. 20nm-VDR is the most toxic materials followed by 40nm-VDR, P8-VDR, and W4-VDR in a descending order.

36 MATERIALS SCIENCE↗