Search NASA⌕ Search

SEARCH · Search NASA

Results for “chemical doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of the sample work function on alkali metal dosing induced electronic structure change

Alkali metal dosing (AMD) has been widely used as a way to control doping without chemical substitution. This technique, in combination with angle resolved photoemission spectroscopy (ARPES), often provides an opportunity to observe unexpected phenomena. However, the amount of transferred charge and the corresponding change in the electronic structure vary significantly depending on the material. Here, we report study on the correlation between the sample work function and alkali metal induced electronic structure change for three iron-based superconductors: FeSe, Ba(Fe 0.94 Co 0.06 ) 2 As 2 and NaFeAs which share a similar Fermi surface topology. Electronic structure change upon monolayer of alkali metal dosing and the sample work function were measured by ARPES. In this work, our results show that the degree of electronic structure change is proportional to the difference between the work function of the sample and Mulliken's absolute electronegativity of the dosed alkali metal. This finding provides a possible way to estimate the AMD induced electronic structure change.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces

Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi 0.95 Ni 0.05 O 3–δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi 0.9 Nb 0.05 Ni 0.05 O 3–δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.

25 ENERGY STORAGE↗
DOE OSTI2023

Recent progress in MnBi2 n Te3 n +1 intrinsic magnetic topological insulators: crystal growth, magnetism and chemical disorder

ABSTRACT The search for magnetic topological materials has been at the forefront of condensed matter research for their potential to host exotic states such as axion insulators, magnetic Weyl semimetals, Chern insulators, etc. To date, the MnBi2nTe3n+1 family is the only group of materials showcasing van der Waals-layered structures, intrinsic magnetism and non-trivial band topology without trivial bands at the Fermi level. The interplay between magnetism and band topology in this family has led to the proposal of various topological phenomena, including the quantum anomalous Hall effect, quantum spin Hall effect and quantum magnetoelectric effect. Among these, the quantum anomalous Hall effect has been experimentally observed at record-high temperatures, highlighting the unprecedented potential of this family of materials in fundamental science and technological innovation. In this paper, we provide a comprehensive review of the research progress in this intrinsic magnetic topological insulator family, with a focus on single-crystal growth, characterization of chemical disorder, manipulation of magnetism through chemical substitution and external pressure, and important questions that remain to be conclusively answered.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evolution of charge correlations in the hole-doped kagome superconductor CsV 3−𝑥⁢ Ti 𝑥 ⁢Sb 5

The interplay between superconductivity and charge correlations in the kagome metal CsV 3⁢ Sb 5 can be tuned by external perturbations such as doping or pressure. Here we present a study of charge correlations and superconductivity upon hole doping via Ti substitution on the V kagome sites in CsV 3−𝑥 ⁢Ti 𝑥 ⁢Sb 5 via synchrotron x-ray diffraction and scanning superconducting quantum interference device measurements. While the superconducting phase, as viewed via the vortex structure, remains conventional and unchanged across the phase diagram, the nature of charge correlations evolves as a function of hole doping from the first superconducting dome into the second superconducting dome. For Ti doping in the first superconducting dome, competing 2×2×2 and 2×2×4 supercells form within the charge density wave state and are suppressed rapidly with carrier substitution. In the second superconducting dome, no charge correlations are detected. Here, comparing these results to those observed for CsV 3 ⁢Sb 5−𝑥 ⁢Sn 𝑥 suggests important differences between hole doping via chemical substitution on the V and Sb sites, particularly in the disorder potential associated with each dopant.

Charge density waves↗
DOE OSTI2023

Production of Precursor Materials for the Development of Iron-Based Superconductor (IBS) Wire

The objective of the activities under this Annex is to address the extrinsic Jc limitations uncovered in pioneering work. In order to engineer the defects pinning landscape charged particle irradiations experiments on bulk samples, different doping and chemical additions will be performed at different National facilities (Test Beam Facility at Fermilab; Linac Isotope Producer at Brookhaven National Laboratory; Integrated Biology Laboratory at University of Wisconsin-Madison; Facility for Rare Isotope Beams at Michigan State University). The samples will be produced at ENEA by different techniques. Magnetization and advanced microscopy measures will be performed at Fermilab. After irradiation, depending on the level of radioactivity, the samples will be tested at Fermilab or where it is possible to measure radioactive materials as University of Wisconsin-Madison.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Production of Precursor Materials for the Development of Iron-Based Superconductor (IBS) Wire

The objective of the activities under this Annex is to address the extrinsic Jc limitations uncovered in pioneering work. In order to engineer the defects pinning landscape charged particle irradiations experiments on bulk samples with different doping and chemical additions will be performed at different National facilities (Test Beam Facility at Fermilab; Linac Isotope Producer at Brookhaven National Laboratory; Integrated Biology Laboratory at University of Wisconsin-Madison; Facility for Rare Isotope Beams at Michigan State University). The samples will be produced at TUAT by different synthesis techniques. Magnetization and advanced microscopy measures will be performed at Fermilab. After irradiation, depending on the level of radioactivity, the samples will be tested at Fermilab or where it is possible to measure radioactive materials as University of Wisconsin-Madison. In parallel, the precursor materials produced by TUAT will be used for IBS-wire fabrication at Fermi

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Activation of anionic redox in d 0 transition metal chalcogenides by anion doping

Expanding the chemical space for designing novel anionic redox materials from oxides to sulfides has enabled to better apprehend fundamental aspects dealing with cationic-anionic relative band positioning. Pursuing with chalcogenides, but deviating from cationic substitution, we here present another twist to our band positioning strategy that relies on mixed ligands with the synthesis of the Li 2 TiS 3-x Se x solid solution series. Through the series the electrochemical activity displays a bell shape variation that peaks at 260 mAh/g for the composition x = 0.6 with barely no capacity for the x = 0 and x = 3 end members. We show that this capacity results from cumulated anionic (Se 2– /Se n– ) and (S 2– /S n– ) and cationic Ti 3+ /Ti 4+ redox processes and provide evidence for a metal-ligand charge transfer by temperature-driven electron localization. Moreover, DFT calculations reveal that an anionic redox process cannot take place without the dynamic involvement of the transition metal electronic states. These insights can guide the rational synthesis of other Li-rich chalcogenides that are of interest for the development of solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

A study on sub-bandgap photoexcitation in nitrogen- and boron-doped diamond with interdigitated device structure

Diamond is an ultrawide-bandgap semiconductor suitable for high power devices that require high current carrying capacity, high blocking voltages, and smaller form factors. We investigated various diamond structures for extrinsic photoconductive semiconductor switches, including an insulating high-pressure high-temperature type Ib (highly nitrogen-doped) substrate, a chemical vapor deposited (CVD) type IIa (unintentionally doped) substrate, a CVD grown semiconducting boron-doped epilayer on a type IIa substrate, and boron-implanted type Ib and IIa substrates. Using these samples, we fabricated and characterized planar interdigitated photoconductive switches with 30 μm, electrode gaps. 532 and 1064 nm Nd:YAG laser pulses with energies up to 3.5 mJ/pulse were used to trigger the switches. Photoresponses were measured at bias voltages ranging from 10 to 100 V, corresponding to electric fields of 3.3–33 kV/cm. In this field range, the type Ib device exhibited the highest average on/off-state current ratio, on the order of 10 11 , when triggered with 0.8 mJ/pulse, 532 nm laser pulses. However, only the CVD grown boron-doped epilayer and boron implanted IIa devices showed decent sensitivity to 1064 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Combination of Counterion Size and Doping Concentration Determines the Electronic and Thermoelectric Properties of Semiconducting Polymers

In both chemical and electrochemical doping of organic semiconductors (OSCs), a counterion, either from the electrolyte or ionized dopant, balances the charge introduced to the OSC. Despite the large influence of this counterion on OSC optical and electronic response, there remains substantial debate on how a fundamental parameter, ion size, impacts these properties. Here, this work resolves much of this debate by accounting for two doping regimes. In the low-doping regime, the Coulomb binding energies between charge carriers on the OSC and the counterions are significant, and larger counterions lead to decreased Coulomb interactions, more delocalized charge carriers, and higher electrical conductivities. In the high-doping regime, the Coulomb binding energies become negligible due to the increased dielectric constant of the films and a smoothing of the energy landscape; thereby, the electrical conductivities depend primarily on the extent of morphological disorder in the OSC. Moreover, in regioregular poly(3-hexylthiophene), rr-P3HT, smaller counterions lead to greater bipolaron concentrations in the low-doping regime due to the increased Coulomb interactions. Emphasizing the impact of the counterion size, it is shown that larger counterions can lead to increased thermoelectric power factors for rr-P3HT.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Diesel Particulate Filter Durability Performance Comparison Using Metals Doped B20 vs. Conventional Diesel Part II: Chemical and Microscopic Characterization of Aged DPFs

This project's objective was to generate experimental data to evaluate the impact of metals doped B20 on diesel particle filter (DPF) ash loading and performance compared to that of conventional petrodiesel. The effect of metals doped B20 vs. conventional diesel on a DPF was quantified in a laboratory controlled accelerated ash loading study. The ash loading was conducted on two DPFs - one using ULSD fuel and the other on B20 containing metals dopants equivalent to 4 ppm B100 total metals. Engine oil consumption and B20 metals levels were accelerated by a factor of 5, with DPFs loaded to 30 g/L of ash. Details of the ash loading experiment and on-engine DPF performance evaluations are presented in the companion paper (Part I). The DPFs were cleaned, and ash samples were taken from the cleaned material. X-ray Fluorescence (XRF), X-Ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD) were conducted on the ash samples. Core samples were taken from the cleaned DPF and were subjected to scanning electron microscope energy dispersive x-ray spectroscopy (SEM-EDS) and XRF analysis. A comparison of the data from the two DPFs is presented. The XRD and XPS analysis showed that the compounds present in the ash from the two DPFs were nearly identical, though differing in concentrations. CaSO4 was the biggest component of the ash from both DPFs. The metals doped B20 fuel resulted in ash with similar characteristics to that deposited by the lube oil and did not appear to have any deleterious physical effects on the DPF substrate (did not penetrate the substrate).

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗
DOE OSTI2022

Novel Amorphous Carbons for the Adsorption of Phosphate: Part I. Elucidation of Chemical Structure of N-Metal-Doped Chars

Due to phosphate’s necessity in agriculture and its danger to the environment, the development of adsorbents for its removal has been the subject of intensive research activity. Although the introduction of nitrogen functionality to chars and modification of biochar with metals have proven to change the character of the char structure, making it more active toward nutrients, there is no study regarding the doping of biochar with metals and nitrogen simultaneously for the adsorption of phosphates. This paper is the first of two in which we report the production, characterization, and evaluation of N-metal-doped biochars from cellulose for phosphate removal from liquid effluents. In this part, we describe the production and characterization of N-Ca-, N-Fe-, and N-Mg-doped biochars. The elemental composition and surface area of each of the materials produced is reported. Elemental and surface characterization of the chars are reported with the largest N content appearing at a temperature of 800 °C (12.5 wt %) and a maximum surface area for biochar produced at 900 °C (1314 m2/g). All of the adsorbents were visualized by scanning electron microscope (SEM), confirming that although there are some crystals on the surface of the biochar produced, most of the N, Mg, and Ca are part of the polyaromatic ring structure. Transmission electron microscope (TEM) images clearly show the formation of nanoclusters with the metals in the case of N-Fe and N-Ca biochars. The N-Mg biochars show a uniform distribution of the Mg through the carbon surface. X-ray photoelectron spectroscopy (XPS) studies of the biochars produced with metals and varying nitrogen levels clearly show Mg and Ca peaks shifting their position in the presence of N, suggesting the formation of stable structures between metals and N in the carbon polyaromatic ring system. To elucidate the nature of these structures, we conducted DFT-based calculations on different configurations of the nitrogenated structures. The calculated binding energy shifts were found to closely match the XPS experimental binding energy, confirming the likelihood of these structures in biochar. Finally, based on our experimental and modeling results, we hypothesize that an important fraction of the Mg and Ca is introduced to these biochars at the edges. Another fraction of Mg and Ca is in the form of phthalocyanine-like internal structures. More experimental studies are needed to confirm the formation of these very interesting structures and their potential use as adsorbents or catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-throughput printing of combinatorial materials from aerosols

The development of new materials and their compositional and microstructural optimization are essential in regard to next-generation technologies such as clean energy and environmental sustainability. However, materials discovery and optimization have been a frustratingly slow process. The Edisonian trial-and-error process is time consuming and resource inefficient, particularly when contrasted with vast materials design spaces 1 . Whereas traditional combinatorial deposition methods can generate material libraries 2,3 , these suffer from limited material options and inability to leverage major breakthroughs in nanomaterial synthesis. Here we report a high-throughput combinatorial printing method capable of fabricating materials with compositional gradients at microscale spatial resolution. In situ mixing and printing in the aerosol phase allows instantaneous tuning of the mixing ratio of a broad range of materials on the fly, which is an important feature unobtainable in conventional multimaterials printing using feedstocks in liquid–liquid or solid–solid phases 4–6 . We demonstrate a variety of high-throughput printing strategies and applications in combinatorial doping, functional grading and chemical reaction, enabling materials exploration of doped chalcogenides and compositionally graded materials with gradient properties. The ability to combine the top-down design freedom of additive manufacturing with bottom-up control over local material compositions promises the development of compositionally complex materials inaccessible via conventional manufacturing approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Chemical bond and phase stability of Ga-doped Sm2Fe17Cx magnet

Sm2Fe17C3 phase (2:17) is metastable and exhibits excellent intrinsic hard magnetic properties. Doping elements such as Ga facilitate the formation of a single-phase 2:17 structure in arc-melted Sm2Fe17Cx alloys, which opens a promising route for fabricating fully dense bulk Sm2Fe17Cx magnets via high-temperature techniques such as melting and sintering. First-principles electronic structure calculation indicates that Ga prefers to partially replace Fe at the 9d and 18h crystallographic sites in Sm2Fe17C3 and Sm2Fe17, respectively. This difference in site preference is attributed to the distinct chemical environments surrounding the Fe atoms in the two compounds. Ga substitution favors the Sm–Ga bonding formation while avoiding Ga–C interactions. Doped Ga atoms result in more negative formation energy in Sm2(Fe, Ga)17C3, indicating improved structural stability. Crystal Orbital Hamilton Population analysis reveals that carbon insertion weakens the bonding of Sm-Fe (18h) and Sm-Fe (18f) in Sm2Fe17C3. Ga doping facilitates electron redistribution across chemical bonds, thereby reinforcing Fe(18h)–Sm and Fe(18f)–Sm interactions and stabilizing the carbon-centered octahedral local structure. This synergistic effect contributes significantly to the observed enhancement in phase stability of Sm2(Fe, Ga)17Cx. These findings suggest that chemical bond engineering through the selective doping of Ga can enhance phase stability and facilitate the synthesis of Sm2Fe17C3, providing a viable strategy for developing advanced magnets.

Liu, Xubo [Critical Materials Innovation Hub, Divi↗
DOE OSTI2022

Reverse water-gas shift: Na doping of m-ZrO 2 supported Pt for selectivity control

Reverse water-gas shift (RWGS) is a vital step in producing syngas for the chemical conversion of CO 2 to liquid transportation fuels and chemicals. Na-doping of m-ZrO 2 supported Pt catalysts allowed selectivity control by systematically increasing the ratio of relative rates of r CO /r CH4 . This was achieved by facilitating the formation of formate intermediate species, which precedes CO formation, and by suppressing the metallic Pt 0 active sites responsible for CH 4 formation. Here, a 2.5%Na-2%Pt/m-ZrO 2 catalyst was first tested for the forward water-gas shift (FWGS) reaction and found to have 50% higher CO conversion at 285°C compared to the undoped catalyst. Results of DRIFTS spectroscopy of adsorbed CO confirmed a formate ν(CH) band shift to lower wavenumbers (2870–2802 cm —1 ) with the addition of Na and more rapid forward formate decomposition in steam to H 2 and carbonate species, the precursor to CO 2 . This is consistent with C-H bond breaking being the rate limiting step of a FWGS mechanism occurring at the metal-support junction. Consistent with this, DRIFTS of RWGS in 4%CO 2 + 60%H 2 showed more facile formation of formate for the Na-doped catalyst and, once again, the ν(CH) band was shifted to lower wavenumbers (2874–2803 cm —1 ) with Na-doping. In addition, Na doping resulted in a systematic decrease in the Pt-carbonyl band in DRIFTS of adsorbed CO as well as DRIFTS of in-situ RWGS reaction tests, suggesting that Na blocked a fraction of on-top Pt sites, breaking up ensembles of Pt 0 responsible for methanation. The selectivity of the 2.5%Na-doped catalyst, unlike its undoped counterpart, was remarkably resistant to methanation (e.g., selectivity < 0.2% CH 4 with pressures of up to 20 bar).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Novel niobium-doped titanium oxide towards electrochemical destruction of forever chemicals

Electrochemical advanced oxidative processes (EAOP) are a promising route to destroy recalcitrant organic contaminants such as per- and polyfluoroalkyl substances (PFAS) in drinking water. Central to EAOP are catalysis-induced reactive free radicals for breaking the carbon fluorine bonds in PFAS. Generating these reactive species electrochemically at electrodes provides an advantage over other oxidation processes that rely on chemicals or other harsh conditions. Herein, we report on the performance of niobium (Nb) doped rutile titanium oxide (TiO 2 ) as a novel EAOP catalytic material, combining theoretical modeling with experimental synthesis and characterization. Calculations based on density functional theory are used to predict the overpotential for oxygen evolution at these candidate electrodes, which must be high in order to oxidize PFAS. The results indicate a non-monotonic trend in which Nb doping below 6.25 at.% is expected to reduce performance relative to TiO 2 , while higher concentrations up to 12.5 at.% lead to increased performance, approaching that of state-of-the-art Magnéli Ti 4 O 7 . TiO 2 samples were synthesized with Nb doping concentration at 10 at.%, heat treated at temperatures from 800 to 1100 °C, and found to exhibit high oxidative stability and high generation of reactive oxygen free radical species. The capability of Nb-doped TiO 2 to destroy two common species of PFAS in challenge water was tested, and moderate reduction by ~ 30% was observed, comparable to that of Ti 4 O 7 using a simple three-electrode configuration. We conclude that Nb-doped TiO 2 is a promising alternative EAOP catalytic material with increased activity towards generating reactive oxygen species and warrants further development for electrochemically destroying PFAS contaminants.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Predictability as a probe of manifest and latent physics: The case of atomic scale structural, chemical, and polarization behaviors in multiferroic Sm-doped BiFeO 3

The predictability of a certain effect or phenomenon is often equated with the knowledge of relevant physical laws, typically understood as a functional or numerically derived relationship between the observations and known states of the system. Correspondingly, observations inconsistent with prior knowledge can be used to derive new knowledge on the nature of the system or indicate the presence of yet unknown mechanisms. In this work, we explore the applicability of Gaussian processes (GP) to establish predictability and uncertainty of local behaviors from multimodal observations, providing an alternative to this classical paradigm. Using atomic resolution scanning transmission electron microscopy (STEM) of multiferroic Sm-doped BiFeO 3 across a broad composition range, we directly visualize the atomic structure and structural, physical, and chemical order parameter fields for the material. GP regression is used to establish the predictability of the local polarization field from different groups of parameters, including the adjacent polarization values and several combinations of physical and chemical descriptors, including lattice parameters, column intensities, etc. We observe that certain elements of microstructure, including charged and uncharged domain walls and interfaces with the substrate, are best predicted with specific combinations of descriptors, and this predictability and associated uncertainties are consistent across the composition series. The associated generative physical mechanisms are discussed. It is also found that certain parameter combinations tend to predict the orthorhombic phase in the cases where rhombohedral phase is observed, suggesting a potential role of clamping and confinement phenomena in phase equilibrium in Sm-BiFeO 3 system close to morphotropic phase boundary. We argue that predictability and uncertainty in observational data offer a new pathway to probe the physics of condensed matter systems from multimodal local observations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Two-dimensional spin systems in PECVD-grown diamond with tunable density and long coherence for enhanced quantum sensing and simulation

Systems of spins engineered with tunable density and reduced dimensionality enable a number of advancements in quantum sensing and simulation. Defects in diamond, such as nitrogen-vacancy (NV) centers and substitutional nitrogen (P1 centers), are particularly promising solid-state platforms to explore. However, the ability to controllably create coherent, two-dimensional spin systems and characterize their properties, such as density, depth confinement, and coherence, is an outstanding materials challenge. We present a refined approach to engineer dense (≳1 ppm ∙ nm), 2D nitrogen, and NV layers in diamond using delta-doping during plasma-enhanced chemical vapor deposition epitaxial growth. We employ both traditional materials techniques, e.g., secondary ion mass spectrometry, alongside NV spin decoherence-based measurements to characterize the density and dimensionality of the P1 and NV layers. We find P1 densities of 5–10 ppm ∙ nm, NV densities between 1 and 3.5 ppm ∙ nm tuned via electron irradiation dosage, and depth confinement of the spin layer down to 1.6 nm. We also observe high (up to 0.74) ratios of NV to P1 centers and reproducibly long NV coherence times, dominated by dipolar interactions with the engineered P1 and NV spin baths.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning charge density wave order and superconductivity in the kagome metals KV 3 Sb 5 – x Sn x and RbV 3 Sb 5 – x Sn x

The family of AV 3 Sb 5 (A = K, Rb, Cs) kagome metals exhibits charge density wave (CDW) order, proposed to be chiral, followed by a lower temperature superconducting state. Recent studies have proposed the importance of band structure saddle points proximal to the Fermi energy in governing these two transitions. Here we show the effects of hole doping achieved via chemical substitution of Sn for Sb on the CDW and superconducting states in both KV 3 Sb 5 and RbV 3 Sb 5 and generate a phase diagram. Furthermore, hole doping lifts the Γ pocket and van Hove singularities toward E F causing the superconducting T C in both systems to increase to about 4.5 K, while rapidly suppressing the CDW state.

36 MATERIALS SCIENCE↗