SEARCH · Search NASA

Results for “coherences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Tailoring coherent charge transport in graphene by deterministic defect generation

Harnessing the wave-nature of charge carriers in solid state devices, electron optics investigates and exploits coherent phenomena, in analogy with optics and photonics. Typically, this requires complex electronic devices leveraging macroscopically coherent charge transport in two-dimensional electron gases and superconductors. Here, collective coherent effects are induced in a simple counterintuitive architecture by defect engineering. Deterministically introduced lattice defects in graphene enable the phase coherent charge transport by playing the role of potential barriers, instead of scattering centres as conventionally considered. Thus, graphene preserves its quasi-ballistic quantum transport and can support phase-matched charge carrier waves. Based on this approach, multiple electronic Fabry-Pèrot cavities are formed by creating periodically alternating defective and pristine nano-stripes through low energy electron-beam irradiation. Indeed, defective stripes behave as partially reflecting mirrors and resonantly confine the charge carrier waves within the pristine areas, giving rise to Fabry-Pèrot resonant modes. These modes experimentally manifest as sheet resistance oscillations, as also confirmed by Landauer-Büttiker simulations. Moreover, these coherent phenomena survive up to 30 K for both polarities of charge carriers, contrarily to traditional monopolar electrostatically created Fabry-Pèrot interferometers. Our study positions defective graphene as an innovative platform for coherent electronic devices, with potential applications in nano and quantum technologies.

Melchioni, Nicola↗

NASA NTRS1980

Application of coherence in fan noise studies

A study of fan noise was made by using the coherence function to obtain far field spectra that were coherent with the fan rotational rate. Choosing fan rotational rate as one of the two variables yielded new information about the far field noise generated during static fan testing. As a result of this coherent data processing, the inlet fan-tone noise present in static testing was determined to be mostly random when the rotor-alone and rotor-stator interaction tones were cut off. After the rotor-alone sound field was cut on, the sound pressure became coherent, and the angular extent of high coherence increased as fan speed was increased. In addition, the sound field was organized as a pattern of lobes whose amplitude varied slowly with time. Additional fan test results indicate that operating the fan with an inflow control device can partially reduce the fan-tone noise levels to those produced by coherent processing.

Balombin, J. R.↗

NASA NTRS1981

Role of coherent structures in turbulent shear flows

A definition for the large-scale coherent structure is presented, and the nature and role of coherent structures in turbulent shear flows are examined. The equations governing the coherent motions and the experimental considerations as well as constraints in the investigations of coherent structures in wall-bounded and free turbulent shear flows are discussed. Results from a few of our recent and on-going studies of coherent structures in excited and unexcited free turbulent shear flows are reviewed. These results show that coherent structures are dominant in transport in the early stages of their formation, but not in the self-preserving regions of turbulent shear flows.

Fazle Hussain, A. K. M.↗

NASA NTRS1981

The preferred-mode coherent structure in the near field of an axisymmetric jet with and without excitation

Visualization and phase-locked hot-wire measurements have been used to investigate the preferred-mode coherent structure in the near field of an axisymmetric jet for different Reynolds numbers and for the two limiting asymptotic states of the exit boundary layer: laminar and fully developed turbulent. Distributions of phase-averaged longitudinal and lateral velocities, coherent vorticity, coherent and incoherent turbulence Reynolds stresses, and coherent strain rate and production have been obtained over the spatial extent of the coherent structure for a Strouhal number of 0.3. It is found that these properties are independent of the initial conditions, but weakly dependent on the Reynolds number up to about 100,000. The naturally occurring coherent structure in the unexcited jet, educed via an optimized conditional sampling scheme, shows no clear dependence on the jet Reynolds number up to 800,000.

Hussain, A. K. M. F.↗

NASA NTRS1987

Coherent structures: Comments on mechanisms

There is now overwhelming evidence that in most turbulent flows there exist regions moving with the flow where the velocity and vorticity have a characteristic structure. These regions are called coherent structures because within them the large-scale distributions of velocity and/or vorticity remain coherent even as these structures move through the flow and interact with other structures. Since the flow enters and leaves the bounding surfaces of these structures, a useful definition for coherent structures is that they are open volumes with distinctive large-scale vorticity distributions. Possible fruitful directions for the study of the dynamics of coherent structures are suggested. Most coherent structures research to data was concentrated on measurement and kinematical analysis; there is now a welcome move to examine the dynamics of coherent structures, by a variety of different methods. A few of them will be described.

Hunt, J. C. R.↗

NASA NTRS1992

Coherent summation of spatially distorted Doppler lidar signals using a two-dimensional heterodyne detector array

We have investigated the improvement in the signal-to-noise ratio for a coherent Doppler lidar through the use of a multi-element heterodyne detector array. Such an array enables the spatial summation of atmospheric refractive turbulence induced speckles, and time varying target speckles. Our recent experiments have shown that the non-coherent summation of the lidar signals from a heterodyne detector array can enhance the heterodyne mixing efficiency and thus the signal-to-noise ratio. In this paper, we expand this work to include the coherent summation of array signals. The digitized heterodyne signals were stored in a personal computer. Fast Fourier transforms were performed on both the non-coherent and coherent summations of the detector array signals. It was found that the coherent summation greatly enhanced the accuracy in the Doppler frequency estimate. A theoretical analysis was performed and indicated good agreement with experimental results. We have also applied these results to the more general lidar applications including atmospheric wind sensing, and have found that in most lidar applications the Doppler frequency estimate is increased through the use of the heterodyne detector array.

Chan, Kin Pui↗

NASA NTRS1991

Coherent Doppler lidar for automated space vehicle, rendezvous, station-keeping and capture

Recent advances in eye-safe, short wavelength solid-state lasers offer real potential for the development of compact, reliable, light-weight, efficient coherent lidar. Laser diode pumping of these devices has been demonstrated, thereby eliminating the need for flash lamp pumping, which has been a major drawback to the use of these lasers in space based applications. Also these lasers now have the frequency stability required to make them useful in coherent lidar, which offers all of the advantages of non-coherent lidar, but with the additional advantage that direct determination of target velocity is possible by measurement of the Doppler shift. By combining the Doppler velocity measurement capability with the inherent high angular resolution and range accuracy of lidar it is possible to construct Doppler images of targets for target motion assessment. A coherent lidar based on a Tm,Ho:YAG 2-micrometer wavelength laser was constructed and successfully field tested on atmospheric targets in 1990. This lidar incorporated an all solid state (laser diode pumped) master oscillator, in conjunction with a flash lamp pumped slave oscillator. Solid-state laser technology is rapidly advancing, and with the advent of high efficiency, high power, semiconductor laser diodes as pump sources, all-solid-state, coherent lidars are a real possibility in the near future. MSFC currently has a feasibility demonstration effort under way which will involve component testing, and preliminary design of an all-solid-state, coherent lidar for automatic rendezvous, and capture. This two year effort, funded by the Director's Discretionary Fund is due for completion in 1992.

Dunkin, James A.↗

NASA NTRS1999

The NASA/MSFC Coherent Lidar Technology Advisory Team

The SPAce Readiness Coherent Lidar Experiment (SPARCLE) mission was proposed as a low cost technology demonstration mission, using a 2-micron, 100-mJ, 6-Hz, 25-cm, coherent lidar system based on demonstrated technology. SPARCLE was selected in late October 1997 to be NASA's New Millennium Program (NMP) second earth-observing (EO-2) mission. To maximize the success probability of SPARCLE, NASA/MSFC desired expert guidance in the areas of coherent laser radar (CLR) theory, CLR wind measurement, fielding of CLR systems, CLR alignment validation, and space lidar experience. This led to the formation of the NASA/MSFC Coherent Lidar Technology Advisory Team (CLTAT) in December 1997. A threefold purpose for the advisory team was identified as: 1) guidance to the SPARCLE mission, 2) advice regarding the roadmap of post-SPARCLE coherent Doppler wind lidar (CDWL) space missions and the desired matching technology development plan 3, and 3) general coherent lidar theory, simulation, hardware, and experiment information exchange. The current membership of the CLTAT is shown. Membership does not result in any NASA or other funding at this time. We envision the business of the CLTAT to be conducted mostly by email, teleconference, and occasional meetings. The three meetings of the CLTAT to date, in Jan. 1998, July 1998, and Jan. 1999, have all been collocated with previously scheduled meetings of the Working Group on Space-Based Lidar Winds. The meetings have been very productive. Topics discussed include the SPARCLE technology validation plan including pre-launch end-to-end testing, the space-based wind mission roadmap beyond SPARCLE and its implications on the resultant technology development, the current values and proposed future advancement in lidar system efficiency, and the difference between using single-mode fiber optical mixing vs. the traditional free space optical mixing.

Kavaya, Michael J.↗

NASA NTRS1999

Pre-Launch End-to-End Testing Plans for the SPAce Readiness Coherent Lidar Experiment (SPARCLE)

Kavaya, Michael J.↗

NASA NTRS2012

Determining Correlation and Coherence Lengths in Turbulent Boundary Layer Flight Data

Wall pressure data acquired during flight tests at several flight conditions are analysed and the correlation and coherence lengths of the data reported. It is found that the correlation and coherence lengths are influenced by the origin of the structure producing the pressure and the frequency bandwidth over which the analyses are performed. It is shown how the frequency bandwidth biases the correlation length and how the convection of the pressure field might reduce the coherence measured between sensors. A convected form of the cross correlation and cross spectrum is introduced to compensate for the effects of convection. Coherence lengths measured in the streamwise direction appear much longer than expected. Coherent structures detected using the convected cross correlation do not exhibit an exponential coherent power decay.

Palumbo, Dan↗

DOE OSTI2023

Coherence from multiorbital tunneling ionization of molecules

We present a simple and general coherence model for multiorbital tunnel ionization of molecules, which we incorporate into our previously developed density-matrix approach for sequential double ionization. Here, the influence of this coherence is investigated through simulations of single ionization and sequential double ionization of N 2 and O 2 using few-cycle near-infrared laser pulses. In the case of single ionization, our results reveal the crucial role played by this coherence in generating population inversion in N 2 + , suggesting a potential mechanism for air lasing. Regarding sequential double ionization, we observe only minor changes in the kinetic energy release spectra when the coherence is included, while noticeable differences in the angle-dependent dication yield for both N 2 and O 2 are found. Based on these findings, we recommend the inclusion of multiorbital tunnel ionization coherence in models for single ionization of general molecules, while suggesting that it can be safely neglected in the case of sequential double ionization.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2022

Enabling multiple intercavity polariton coherences by adding quantum confinement to cavity molecular polaritons

In this study, the “particle in a box” idea, which was broadly developed in semiconductor quantum dot research, was extended into mid-infrared (IR) cavity modes by applying lateral confinement in an optical cavity. The discrete cavity modes hybridized with molecular vibrational modes, resulting in a quartet of polariton states that can support multiple coherence states in the IR regime. We applied tailored pump pulse sequences to selectively prepare these coherences and verified the multi-coherence existence. The simulation based on Lindblad equation showed that because the quartet of polariton states resided in the same cavity, they were specifically robust toward decoherence caused by fluctuations in space. The multiple robust coherences paved the way for entangled states and coherent interactions between cavity polaritons, which would be critical for advancing polariton-based quantum information technology.

2D IR↗

DOE OSTI2020

Ultrafast molecular frame electronic coherences from lab frame scattering anisotropies

Electronic coherences in molecules are ultrafast charge oscillations on the molecular frame (MF) and their direct observation and separation from electronic population dynamics is challenging. Here we present a valence shell lab frame (LF) scattering method suited to probing electronic coherences in isolated systems. MF electronic coherences lead to LF electronic anisotropies observable by ultrafast angle-resolved scattering. Moment analysis of the LF anisotropy completely separates electronic coherences from population dynamics, demonstrated in excited state NH 3 using ultrafast time-energy-angle-resolved photoelectron spectroscopy. Overall, this general approach applies equally to attosecond/femtosecond electronic coherences in isolated systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

The Patterson function as auto-hologram and graph enables the direct solution to the phase problem for coherently illuminated atomistic structures

Abstract The coherent Patterson function, derived from the coherent scattering intensities from N atoms, can be described as an auto-holographic image, i.e., the superposition of N -holographic images in which each atom serves as the source of a different reference wave, and as a mathematical graph of the unknown structure. These insights indicate that the unknown structure is significantly over-determined by the inherent information content in a Patterson function by a factor of ( N − 1)/2 (for non-degenerate structures), independent of dimensionality. However, we also show that the ability to resolve the distinct features in the Patterson function depends strongly on details of the experimental design (data range, sampling frequency, and dimensionality). This re-interpretation suggests that the coherent Patterson function provides a natural context for describing the information content in coherent scattering, reveals that there is no inherent phase problem for coherently illuminated pointwise structures, and enables the design of an algorithm which retrieves the structure directly from the Patterson function, without using error metric minimization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Propagation of partially spatially coherent laser beams in instantaneous Kerr media

The propagation of intense, partially spatially coherent laser beams in a medium with instantaneous third-order susceptibility is studied analytically and numerically. For sufficiently high power relative to that required for nonlinear self-focusing, the propagation initially proceeds in two stages. In the first stage, spatial coherence builds up, and in the second stage, the number of speckles reduces. Once the degree of coherence is sufficiently high, whole-beam self-focusing occurs. The beam power is mostly confined within the initial spot radius. Two analytical approaches for describing the evolution of the beam are presented. The method of moments leads to an analytical solution for the rms spot radius that is in excellent agreement with simulations. This method does not require any knowledge of the field statistics beyond the initial conditions and provides no information about the evolution of the individual speckles. The other approach employs a self-similar solution for the second-order coherence function of the field and assumes that the fourth-order coherence function is factorizable and obeys complex circular Gaussian random statistics. The latter method also leads to an analytical expression for the spot radius, but its predictions for the qualitative evolution of the speckles disagree with wave-optics simulations.

lasers↗

DOE OSTI2023

Investigations of correlation and coherence in turbulence from a large-eddy simulation

Abstract. Microscale flow descriptions are often given in terms of mean quantities, turbulent kinetic energy, and/or stresses. Those metrics, while valuable, give limited information about turbulent eddies and coherent turbulent structures. This work investigates the structure of an atmospheric boundary layer using coherence and correlation in space and time with a range of separation distances. We calculate spatial correlations over entire planes of velocity fluctuations, from which we can evaluate the correlation along different directions at different spacings. Similarly, coherence of the three velocity components over separations in the three directions is also investigated. We apply these analyses to a mesoscale–microscale coupled scenario with time-varying conditions and examine nuances in spatial correlations that are often overlooked. Through these analyses and results, this work highlights important differences observed in terms of coherence when comparing large-eddy simulation data to simpler models and suggests ways to improve these simpler models. We note that such differences are important for disciplines like wind energy structural dynamic analysis, in which blade loading and fatigue depend strongly on the structure of the turbulence. We emphasize the additional wealth of data that can be provided by typical atmospheric boundary layer large-eddy simulation when correlation and coherence analysis is included, and we also state the limitations of large-eddy simulation data, which inherently truncate the smaller scales of turbulence.

17 WIND ENERGY↗

NASA NTRSDate not supplied

Coherence Analysis of the Space Launch System using Unsteady Pressure Sensitive Paint

Transonic buffet during atmospheric ascent is a major source of unsteady loading on launch vehicles that, in the past, has led to structural failures. Thus, determining accurate buffet forcing functions (BFFs) to properly predict the vehicle response to buffet is of vital importance in launch vehicle design. The state of the art for obtaining the BFFs relies on wind-tunnel tests where the fluctuating pressures are measured by pressure transducers (PTs) at sparse locations on a rigid, geometrically-scaled buffet model. To compute the BFFs, the outer mold line (OML) of the vehicle is mapped onto contiguous panels centered at the location of the PTs and the measured fluctuating pressures are integrated over the panels’ areas. To mitigate conservatism due to the assumption that the measured buffet pressures act in phase across each panel, coherence factors are applied, effectively reducing the integration areas and, therefore, the buffet forces. For coherence factors to provide the proper level of BFF attenuation, accurate knowledge of the spatial and temporal correlation of the buffet pressures is paramount. Unfortunately, even with hundreds of unsteady pressure transducers instrumenting the models, compromises must be made on the spatial resolution of the PTs. Typically, the PT layout aims at resolving the pressure correlation along the longitudinal axis of the vehicle, assuming that coherent structures propagate mostly in the longitudinal direction. As a result, the distribution of azimuthal/cross-stream correlation is not well known and its impact on the estimated BFFs is often neglected. To fill this and other knowledge gaps, extremely high spatial-resolution uPSP data were collected for three different production-design configurations of the Space Launch System in the NASA Ames Research Center Unitary Plan Wind Tunnel 11-Foot Transonic Wind Tunnel. Specifically, two cargo configurations, the Block 1 and Block 1B, and one crew configuration, the Block 1B crew, were surveyed at resolutions ranging from 600,000 to over 1 million uPSP measurement locations. To shed light on the temporal and spectral behavior of are presented. Several OML regions and flow features of interest are investigated, from theexpansion/shock on the Orion Multi-Purpose Crew Vehicle, to the terminal shock environment on the core stage, and the Strouhal shedding behind the boosters forward attach. The sensitivity of these environments to the vehicle attitude is examined. Furthermore, for selected panels,coherence factors that accurately capture the azimuthal coherence distribution of the buffetpressures are derived and their impact on the estimated BFFs is discussed. Finally, distributions of the local convection velocity and cross spectrum phase are presented.

buffet↗

DOE OSTI2026

Photoinduced Charge Transfer and Vibronic Coherence in CdSe Quantum Dots with Methyl Viologen Acceptors

We show herein that photoinduced charge transfer from CdSe quantum dots (QDs) to surface-bound methyl viologen (MV 2+ ) acceptors is mediated by a vibronically coherent, nonadiabatic mechanism. Broadband multidimensional electronic spectra and an analysis of coherences show that a mixed QD–MV charge-transfer (CT) state is populated on the <50 fs time scale after optical preparation of the X3 (1P 3/2 –1P e ) state, well prior to the appearance of the one-electron photoreduced ground state (MV +• ). A partial redistribution of charge from the core of the QD to the acceptor is revealed by excited-state coherences of an out-of-plane vibrational mode local to MV 2+ and of a low-frequency mode mixing a MV 2+ mode with the longitudinal optical (LO) phonon of the QD core. The ultrafast damping of these coherences indicates that excited-state wavepackets travel from the optically prepared, Franck–Condon structure through a conical intersection to reach the CT state. These results suggest that vibronically coherent processes generating CT intermediates can be exploited to improve the efficiency of QD-based solar cells and photocatalysts.

Cadmium selenide↗