SEARCH · Search NASA
Results for “complex solids”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Nature of Secondary Interactions at Electrophilic Metal Sites of Molecular and Silica-Supported Organolutetium Complexes from Solid-State NMR Spectroscopy
Lu[CH(SiMe 3 ) 2 ] 3 reacts with [SiO 2-700 ] to give [(≡SiO)Lu[CH(SiMe 3 ) 2 ] 2 ] and CH 2 (SiMe 3 ) 2 . [(≡SiO)Lu[CH(SiMe 3 ) 2 ] 2 ] is characterized by solid-state NMR and EXAFS spectroscopy, which show that secondary Lu···C and Lu···O interactions, involving a γ-CH 3 and a siloxane bridge, are present. From X-ray crystallographic analysis, the molecular analogues Lu[CH(SiMe 3 ) 2 ] 3-x [O-2,6-tBu-C 6 H 3 ] x (x = 0-2) also have secondary Lu···C interactions. The 1 H NMR spectrum of Lu[CH(SiMe 3 ) 2 ] 3 shows that the -SiMe 3 groups are equivalent to -125°C and inequivalent below that temperature, δ‡(T c = 148 K)= 7.1 kcal mol -1 . Both -SiMe 3 groups in Lu[CH(SiMe 3 ) 2 ] 3 have 1 J CH = 117 ± 1 Hz at -140°C. The solid-state 13 C CPMAS NMR spectrum at 20°C shows three chemically inequivalent resonances in the area ratio of 4:1:1 (12:3:3); the J-resolved spectra for each resonance give 1 J CH = 117 ± 2 Hz. The 29 Si CPMAS NMR spectrum shows two chemically inequivalent resonances with different values of chemical shift anisotropy. Similar observations are obtained for Lu[CH(SiMe 3 ) 2 ] 3-x [O-2,6-tBu-C 6 H 3 ] x (x = 1 and 2). The spectroscopic data point to short Lu···Cγ contacts corresponding to 3c-2e Lu···Cγ-Siβ interactions, which are supported by DFT calculations. Calculated natural bond orbital (NBO) charges show that Cγ carries a negative charge, while Lu, Hγ, and Siβ carry positive charges; as the number of O-based ligands increases so does the positive charge at Lu, which in turns shortens the Lu···Cγ distance. Finally, the change in NBO charges and the resulting changes in the spectroscopic and crystallographic properties show how ligands and surface-support sites rearrange to accommodate these changes, consistent with Pauling's electroneutrality concept.
Accurate Nonempirical Range-Separated Hybrid van der Waals Density Functional for Complex Molecular Problems, Solids, and Surfaces
Not Available
Environmental and reaction studies on electrochemical cells based on solid charge- transfer complexes.
Environmental and reaction studies on electrochemical cells using metal electrodes and phenothiazine-iodine charge transfer complexes
Uranyl Oxalate Species in Natural Environments: Stability Constants for Aqueous and Solid Uranyl Oxalate Complexes.
Abstract not provided.
Unveiling phase evolution of complex oxides toward precise solid-state synthesis
The precise synthesis of high-purity materials is crucial in accelerating materials discovery. However, the lack of theoretical understanding and practical guidance poses challenges, particularly for materials with compositional and structural complexity. Here, we propose a feasible principle toward synthesizing complex inorganic solids. This principle involves the introduction of an inducer that induces crucial intermediates, which in turn guide the synthesis pathway toward the target materials through structural templating, named inducer-facilitated assembly through structural templating (i-FAST). We validate this principle with three distinct oxides: garnet Li6.5La3Zr1.5Ta0.5O12, perovskite BaCo0.8Sn0.2O3, and pyrochlore Gd1.5La0.5Zr2O7. This structural templating approach enables synthesis along predesigned pathways, forming intermediates that are thermodynamically favored for prior formation and kinetically preferred for the final product, resulting in precisely synthesizing high-purity target materials. This study not only represents a substantial advancement in comprehending the interplay between thermodynamics/kinetics and phase evolution in complex solid synthesis but also provides an effective strategy for guiding exploratory solid-state synthesis.
Cartesian grid simulations of gas-solids flow systems with complex geometry
Complex geometries encountered in many applications of gas–solids flow need special treatment in most legacy multiphase flow solvers with Cartesian numerical grid. This paper briefly outlines the implementation of a cut cell technique in the open-source multiphase flow solver—MFIX for accurate representation of complex geometries. Specifically, applications of the Cartesian cut cell method to different gas–solids fluidization systems including a small scale bubbling fluidized bed with submerged tube bundle and a complete pilot-scale circulating fluidized bed will be presented. In addition to qualitative predictions on the general flow behaviors inside each system, quantitative comparison with the available experimental data will be presented. Furthermore, some results on extending the current cut-cell technique to Lagrangian–Eulerian simulations will be presented.
Spherical Solid He Nanometer Bubbles in an Anisotropic Complex Oxide
We show, using room temperature, high-resolution electron microscopy studies, that implanted He in LiNbO{sub 3} nucleates and accumulates as bubbles. These He inclusions are at {approx} 20 GPa pressure and most probably in the solid phase. In addition, the energetically favored shape of the inclusions in their as-implanted form is spherical and not oblate; this spherical shape is due to the fact that their diameter is below a critical radius for balancing the surface and elastic energies as predicted by elastic theory. When annealed, the characteristic length scale of the He inclusions increases, forming faceted bubbles. Annealing also causes the He inclusions to migrate and accumulate into strings due to the preferred {l_brace}101{bar 4}{r_brace}-pyramidal-twinning planes.
Thermal treatment effects imposed on solid DNA cationic lipid complex with hexadecyltrimethylammonium chloride, observed by variable angle spectroscopic ellipsometry
DNA cationic lipid complexes are materials of properties required for applications in organic electronics and optoelectronics. Often, their thermal stability demonstrated by thermogravimetry is cited in the literature as important issue. However, little is known about processes occurring in heated solid DNA cationic lipid complexes. In frame of this work, thin films of Deoxyribonucleic acid-hexadecyltrimethylammonium chloride (DNA-CTMA) were deposited on silicon wafers. Samples were thermally annealed, and simultaneously, their optical functions were measured by spectroscopic ellipsometry. At lower temperatures, thermal expansion coefficient of solid DNA-CTMA was negative, but at higher temperatures positive. Thermally induced modification of absorption spectrum in UV-vis was observed. It occurred at a range of temperatures higher than this of DNA denaturation in solution. The observed phenomenon was irreversible, at least in time scale of the experiment (one day)
Communication: Accurate higher-order van der Waals coefficients between molecules from a model dynamic multipole polarizability
Due to the absence of the long-range van der Waals (vdW) interaction, conventional density functional theory (DFT) often fails in the description of molecular complexes and solids. In recent years, considerable progress has been made in the development of the vdW correction. However, the vdW correction based on the leading-order coefficient C{sub 6} alone can only achieve limited accuracy, while accurate modeling of higher-order coefficients remains a formidable task, due to the strong non-additivity effect. Here, we apply a model dynamic multipole polarizability within a modified single-frequency approximation to calculate C{sub 8} and C{sub 10} between small molecules. We find that the higher-order vdW coefficients from this model can achieve remarkable accuracy, with mean absolute relative deviations of 5% for C{sub 8} and 7% for C{sub 10}. Inclusion of accurate higher-order contributions in the vdW correction will effectively enhance the predictive power of DFT in condensed matter physics and quantum chemistry.
Luminescent lanthanide complexes with 4-acetamidobenzoate: Synthesis, supramolecular assembly via hydrogen bonds, crystal structures and photoluminescence
Four new luminescent complexes, namely, [Eu(aba){sub 2}(NO{sub 3})(C{sub 2}H{sub 5}OH){sub 2}] (1), [Eu(aba){sub 3}(H{sub 2}O){sub 2}].0.5 (4, 4'-bpy).2H{sub 2}O (2), [Eu{sub 2}(aba){sub 4}(2, 2'-bpy){sub 2}(NO{sub 3}){sub 2}].4H{sub 2}O (3) and [Tb{sub 2}(aba){sub 4}(phen){sub 2}(NO{sub 3}){sub 2}].2C{sub 2}H{sub 5}OH (4) were obtained by treating Ln(NO{sub 3}){sub 3}.6H{sub 2}O and 4-acetamidobenzoic acid (Haba) with different coligands (4, 4'-bpy=4, 4'-bipyridine, 2, 2'-bpy=2, 2'-bipyridine, and phen=1, 10-phenanthroline). They exhibit 1D chains (1-2) and dimeric structures (3-4), respectively. This structural variation is mainly attributed to the change of coligands and various coordination modes of aba molecules. Moreover, the coordination units are further connected via hydrogen bonds to form 2D even 3D supramolecular networks. These complexes show characteristic emissions in the visible region at room temperature. In addition, thermal behaviors of four complexes have been investigated under air atmosphere. The relationship between the structures and physical properties has been discussed. - Graphical abstract: Structure variation of four complexes is attributed to the change of coligands and various coordination modes of aba molecules. Moreover, they show characteristic emissions in the visible region. Highlights: > Auxiliary ligands have played the crucial roles on the structures of the resulting complexes. > Isolated structure units are further assembled via H-bonds to form supramolecular networks. > These solid-state complexes exhibit strong, characteristic emissions in the visible region.
Complex F,Cl Apatite Solid Solution Investigated Using Multinuclear Solid-State NMR Methods
In this paper, a series of synthetic F,Cl apatites with low hydroxyl content was investigated using 31 P, 19 F, and 35 Cl solid-state magic angle spinning (MAS) NMR spectroscopic methods. 31 P single-pulse (SP) NMR spectra show that for each composition the phosphate 31 P chemical shift depends on occupancy of the nearest anion site for each composition. Overall the average chemical shift deviates from linear across the F/Cl series. For intermediate compositions 19 F SP NMR spectra reveal complex, broadened spectral profiles that are not correlated to composition. 19 F{ 35 Cl} TRAPDOR results indicate that the spectral profiles do not reflect occupancy of F and Cl in adjacent column anion sites. We propose that the complex 19 F lineshapes are principally due to broad distributions of 19 F–Ca distances arising from displacement of F along the anion channel. Finally, approximate fluorine atomic positions are estimated based on 19 F chemical shifts of alkaline earth fluoride salts, and the results are in good accord with those proposed for intermediate composition F,Cl apatites from XRD data.
Structural and Electronic Investigations of Complex Intermetallic Compounds
In solid state chemistry, numerous investigations have been attempted to address the relationships between chemical structure and physical properties. Such questions include: (1) How can we understand the driving forces of the atomic arrangements in complex solids that exhibit interesting chemical and physical properties? (2) How do different elements distribute themselves in a solid-state structure? (3) Can we develop a chemical understanding to predict the effects of valence electron concentration on the structures and magnetic ordering of systems by both experimental and theoretical means? Although these issues are relevant to various compound classes, intermetallic compounds are especially interesting and well suited for a joint experimental and theoretical effort. For intermetallic compounds, the questions listed above are difficult to answer since many of the constituent atoms simply do not crystallize in the same manner as in their separate, elemental structures. Also, theoretical studies suggest that the energy differences between various structural alternatives are small. For example, Al and Ga both belong in the same group on the Periodic Table of Elements and share many similar chemical properties. Al crystallizes in the fcc lattice with 4 atoms per unit cell and Ga crystallizes in an orthorhombic unit cell lattice with 8 atoms per unit cell, which are both fairly simple structures (Figure 1). However, when combined with Mn, which itself has a very complex cubic crystal structure with 58 atoms per unit cell, the resulting intermetallic compounds crystallize in a completely different fashion. At the 1:1 stoichiometry, MnAl forms a very simple tetragonal lattice with two atoms per primitive unit cell, while MnGa crystallizes in a complicated rhombohedral unit cell with 26 atoms within the primitive unit cell. The mechanisms influencing the arrangements of atoms in numerous crystal structures have been studied theoretically by calculating electronic structures of these and related materials. Such calculations allow us to examine various interactions at the atomic scale, interactions which include orbital overlap, two-electron interactions, and Madelung terms. Moreover, these electronic studies also provide links between the angstrom-scale atomic interactions and the macro-scale physical properties, such as magnetism. Over the past few decades, there have been many significant developments toward understanding structure-bonding-property relationships in extended solids in terms of variables including atomic size, valence electron concentration, and electronegativity. However, many simple approaches based on electron counting, e.g., the octet rule, the 18-electron rule, or Wade's rules for boranes, cannot be applied adequately or universally to many of the more complex intermetallic compounds. For intermetallic phases that include late transition metals and post transition main group elements as their constituents, one classification scheme has been developed and effectively applied by using their valence electron count per atom (vec). These compounds are known as Hume-Rothery electron phases, and they have a variety of structure types with vec < 2.0 as shown in Table 1.
Bimolecular reaction of CH{sub 3} + CO in solid p-H{sub 2}: Infrared absorption of acetyl radical (CH{sub 3}CO) and CH{sub 3}-CO complex
We have recorded infrared spectra of acetyl radical (CH{sub 3}CO) and CH{sub 3}-CO complex in solid para-hydrogen (p-H{sub 2}). Upon irradiation at 248 nm of CH{sub 3}C(O)Cl/p-H{sub 2} matrices, CH{sub 3}CO was identified as the major product; characteristic intense IR absorption features at 2990.3 (ν{sub 9}), 2989.1 (ν{sub 1}), 2915.6 (ν{sub 2}), 1880.5 (ν{sub 3}), 1419.9 (ν{sub 10}), 1323.2 (ν{sub 5}), 836.6 (ν{sub 7}), and 468.1 (ν{sub 8}) cm{sup −1} were observed. When CD{sub 3}C(O)Cl was used, lines of CD{sub 3}CO at 2246.2 (ν{sub 9}), 2244.0 (ν{sub 1}), 1866.1 (ν{sub 3}), 1046.7 (ν{sub 5}), 1029.7 (ν{sub 4}), 1027.5 (ν{sub 10}), 889.1 (ν{sub 6}), and 723.8 (ν{sub 7}) cm{sup −1} appeared. Previous studies characterized only three vibrational modes of CH{sub 3}CO and one mode of CD{sub 3}CO in solid Ar. In contrast, upon photolysis of a CH{sub 3}I/CO/p-H{sub 2} matrix with light at 248 nm and subsequent annealing at 5.1 K before re-cooling to 3.2 K, the CH{sub 3}-CO complex was observed with characteristic IR features at 3165.7, 3164.5, 2150.1, 1397.6, 1396.4, and 613.0 cm{sup −1}. The assignments are based on photolytic behavior, observed deuterium isotopic shifts, and a comparison of observed vibrational wavenumbers and relative IR intensities with those predicted with quantum-chemical calculations. This work clearly indicates that CH{sub 3}CO can be readily produced from photolysis of CH{sub 3}C(O)Cl because of the diminished cage effect in solid p-H{sub 2} but not from the reaction of CH{sub 3} + CO because of the reaction barrier. Even though CH{sub 3} has nascent kinetic energy greater than 87 kJ mol{sup −1} and internal energy ∼42 kJ mol{sup −1} upon photodissociation of CH{sub 3}I at 248 nm, its energy was rapidly quenched so that it was unable to overcome the barrier height of ∼27 kJ mol{sup −1} for the formation of CH{sub 3}CO from the CH{sub 3} + CO reaction; a barrierless channel for formation of a CH{sub 3}-CO complex was observed instead. This rapid quenching poses a limitation in production of free radicals via bimolecular reactions in p-H{sub 2}.
Dynamic imaging of metastable reaction pathways in lithiated cobalt oxide electrodes
Understanding how lithium-ion batteries function down to the atomic level during charge and discharge cycling can provide valuable guidance to optimize structure-property relationships and to design and understand new electrode materials. Lithium insertion and reactions with the electrodes during charge and discharge cycling can occur via metastable structures with complex ordering and related non-equilibrium phenomena. Remarkably, these processes remain still poorly understood despite their significance in the operation of lithium battery systems in critical technologies. In this communication, we present the dynamics of lithium insertion into Co3O4 and the evolution of metastable phases as probed by in-situ transmission electron microscopy, in concert with first principles density functional theory calculations. We show that the initial lithium intercalation reaction occurs with the formation of several metastable and intermediate phases, followed by a sequence of conversion reactions that perturb and expand the cubic-close-packed oxygen array, ultimately generating an end-product of finely dispersed cobalt metal clusters within a Li2O matrix. The calculated non-equilibrium lithiation pathways corroborate with the experimental lithiation voltages, and explain the significant hysteresis that occurs during electrochemical cycling. The data provide new insights into the complexity of solid state lithium electrochemistry in metal oxides that are relevant to advancing lithium battery technology.
Liquid-based gating mechanism with tunable multiphase selectivity and antifouling behaviour
Living organisms make extensive use of micro- and nanometre-sized pores as gatekeepers for controlling the movement of fluids, vapours and solids between complex environments. The ability of such pores to coordinate multiphase transport, in a highly selective and subtly triggered fashion and without clogging, has inspired interest in synthetic gated pores for applications ranging from fluid processing to 3D printing and lab-on-chip systems(1-10). But although specific gating and transport behaviours have been realized by precisely tailoring pore surface chemistries and pore geometries(6,11-17), a single system capable of controlling complex, selective multiphase transport has remained a distant prospect, and fouling is nearly inevitable(11,12). Here we introduce a gating mechanism that uses a capillary-stabilized liquid as a reversible, reconfigurable gate that fills and seals pores in the closed state, and creates a non-fouling, liquid-lined pore in the open state. Theoretical modelling and experiments demonstrate that for each transport substance, the gating threshold-the pressure needed to open the pores-can be rationally tuned over a wide pressure range. This enables us to realize in one system differential response profiles for a variety of liquids and gases, even letting liquids flow through the pore while preventing gas from escaping. These capabilities allow us to dynamically modulate gas-liquid sorting in a microfluidic flow and to separate a three-phase air-water-oil mixture, with the liquid lining ensuring sustained antifouling behaviour. Because the liquid gating strategy enables efficient long-term operation and can be applied to a variety of pore structures and membrane materials, and to micro- as well as macroscale fluid systems, we expect it to prove useful in a wide range of applications.
Gas-phase detection of solid-state fission product complexes for post-detonation nuclear forensic analysis
Not Available
Dissecting Disorder: Defect-Driven Structural Complexity in Layered Li3InCl6 Solid Electrolyte
Halide solid electrolytes have emerged as promising candidates for solid-state batteries owing to their high oxidative stability and ionic conductivity. Among them, Li3InCl6 (LIC) has attracted significant attention. However, diffraction patterns of LIC synthesized via different methods exhibit distinct differences particularly at low-angle reflectionsindicative of underlying structural disorder. These variations are attributed to deviations from ideal crystallographic order, especially stacking faults, whose impact on structure and ion transport remains poorly understood. Here, we identify and quantify stacking faults in LIC samples prepared under different synthetic conditions. Using X-ray diffraction and time-of-flight neutron diffraction, we construct and refine stacking fault models that accurately reproduce the experimental diffraction features. LIC samples with higher degrees of stacking faults exhibit only negligible differences in ionic conductivities and activation energies. This indicates that stacking faults have a limited impact on altering the Li+ diffusion pathway along the c-axis, likely due to the high concentration of vacancies in the In layers, while Li+ diffusion remains nearly unchanged in the ab-plane. Our results account for the observed differences in diffraction patterns across samples and provide a quantitative assessment of faulting probabilities and stacking sequences. The insights gained from this study are expected to be broadly applicable to other layered halide solid electrolytes and contribute to a deeper understanding of the role of structural disorder in ion transport.