Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistency model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Thermal Analysis of the MC1 Engine Turbopump

The MC1 Engine turbopump supplied the propellants to the main injector. The turbopump consisted of four parts; lox pump, interpropellant seal package (IPS), RP pump and turbine. The thermal analysis was divided into two 2D finite element models; Housing or stationary parts and rotor or rotating parts. Both models were analyzed at the same boundary conditions using SINDA. The housing model consisted of, lox pump housing, ips housing, RP housing, turbine inlet housing, turbine housing, exit guide vane, heat shield and both bearing outer races. The rotor model consisted of the lox impeller; lox end bearing and id race, RP impeller, and RP bearing and id race, shaft and turbine disk. The objectives of the analysis were to: (1) verified the original design and recommend modifications to it, (2) submitted a thermal environment to support the structural analysis, (3) support the component and engine test program. and (4) to support the X34 vehicle program.

Roman, Jose↗
NASA NTRS2002

Thermal Analysis of the MCI Engine Turbopump

The MCI Engine turbopump supplied the propellants to the main injector. The turbopump consisted of four parts; lox pump, interpropellant seal package (IPS), RP pump and turbine. The thermal analysis was divided into two 2D finite element models; Housing or stationary parts and rotor or rotating parts. Both models were analyzed at the same boundary conditions using SINDA. The housing model consisted of; lox pump housing, ips housing, RP housing, turbine inlet housing, turbine housing, exit guide vane, heat shield and both bearing outer races. The rotor model consisted of the lox impeller; lox end bearing and id race, RP impeller, and RP bearing and id race, shaft and turbine disk. The objectives of the analysis were to (1) verified the original design and recommend modifications to it, (2) submitted a thermal environment to support the structural analysis, (3) support the component and engine test program and (4) to support the X34 vehicle program.

Roman, Jose↗
NASA NTRS1988

Appendices to the model description document for a computer program for the emulation/simulation of a space station environmental control and life support system

A Model Description Document for the Emulation Simulation Computer Model was already published. The model consisted of a detailed model (emulation) of a SAWD CO2 removal subsystem which operated with much less detailed (simulation) models of a cabin, crew, and condensing and sensible heat exchangers. The purpose was to explore the utility of such an emulation simulation combination in the design, development, and test of a piece of ARS hardware, SAWD. Extensions to this original effort are presented. The first extension is an update of the model to reflect changes in the SAWD control logic which resulted from test. Also, slight changes were also made to the SAWD model to permit restarting and to improve the iteration technique. The second extension is the development of simulation models for more pieces of air and water processing equipment. Models are presented for: EDC, Molecular Sieve, Bosch, Sabatier, a new condensing heat exchanger, SPE, SFWES, Catalytic Oxidizer, and multifiltration. The third extension is to create two system simulations using these models. The first system presented consists of one air and one water processing system. The second consists of a potential air revitalization system.

Yanosy, James L.↗
NASA NTRS1988

Appendices to the user's manual for a computer program for the emulation/simulation of a space station environmental control and life support system

A user's Manual for the Emulation Simulation Computer Model was published previously. The model consisted of a detailed model (emulation) of a SAWD CO2 removal subsystem which operated with much less detailed (simulation) models of a cabin, crew, and condensing and sensible heat exchangers. The purpose was to explore the utility of such an emulation/simulation combination in the design, development, and test of a piece of ARS hardware - SAWD. Extensions to this original effort are presented. The first extension is an update of the model to reflect changes in the SAWD control logic which resulted from the test. In addition, slight changes were also made to the SAWD model to permit restarting and to improve the iteration technique. The second extension is the development of simulation models for more pieces of air and water processing equipment. Models are presented for: EDC, Molecular Sieve, Bosch, Sabatier, a new condensing heat exchanger, SPE, SFWES, Catalytic Oxidizer, and multifiltration. The third extension is to create two system simulations using these models. The first system presented consists of one air and one water processing system, the second a potential Space Station air revitalization system.

Yanosy, James L.↗
NASA NTRS1974

Numerical modelling of instantaneous plate tectonics

Assuming lithospheric plates to be rigid, 68 spreading rates, 62 fracture zones trends, and 106 earthquake slip vectors are systematically inverted to obtain a self-consistent model of instantaneous relative motions for eleven major plates. The inverse problem is linearized and solved iteratively by a maximum-likelihood procedure. Because the uncertainties in the data are small, Gaussian statistics are shown to be adequate. The use of a linear theory permits (1) the calculation of the uncertainties in the various angular velocity vectors caused by uncertainties in the data, and (2) quantitative examination of the distribution of information within the data set. The existence of a self-consistent model satisfying all the data is strong justification of the rigid plate assumption. Slow movement between North and South America is shown to be resolvable.

Minster, J. B.↗
NASA NTRS1989

An investigation of a mathematical model of an optically pumped Ti(3+):Al2O3 laser system

During the last several years, solid state lasers were developed that have the potential for meeting rigorous performance requirements for space-based remote sensing of the atmosphere. In order to design a stable and efficient laser and to understand the effect on laser output of changes in the physical and design parameters, an understanding of the development of the dynamical processes of the laser is necessary. Typically, the dynamical processes in a laser system are investigated via rate equations describing the evolution of the occupancy in the electronic levels and of the photon density in the laser cavity. There are two approaches to this type of study. Most often, for the sake of simplicity, the spatial variations of the dynamic variables in the laser system are disregarded and the mathematical model consists of a system of first order nonlinear ordinary differential equations (ODE). The second approach is to take into account both spatial and temporal variations in the dynamic variables in the laser cavity. The resulting model consists of a first order semilinear system of partial differential equations (PDE). The model which was studied was studied was generic in the sense that it was a four-level laser system, but the parameters used in the numerical study were specific to Titanium-doped sapphire. For simplicity, a constant, spatially uniform pumping scheme was considered. In addition, a simplification of the model was made so that it treats a single lasing wavelength with a narrow bandwidth. The purpose was to investigate both versions of the mathematical model and to determine whether the numerical solutions are similar both qualitatively and quantitatively. The systems of ordinary differential equations were solved numerically using a Runge-Kutta-Fehlberg algorithm which was very efficient for typical values of the physical parameters. A numerical scheme, based on the Modified Euler method, for computing solutions to the system of partial differential equations was developed and implemented. The PDE model was solved numerically at the expense of greatly increased computer time.

Roberts, Lila F.↗
NASA NTRS1990

Critical evaluation of Jet-A spray combustion using propane chemical kinetics in gas turbine combustion simulated by KIVA-2

Jet-A spray combustion has been evaluated in gas turbine combustion with the use of propane chemical kinetics as the first approximation for the chemical reactions. Here, the numerical solutions are obtained by using the KIVA-2 computer code. The KIVA-2 code is the most developed of the available multidimensional combustion computer programs for application of the in-cylinder combustion dynamics of internal combustion engines. The released version of KIVA-2 assumes that 12 chemical species are present; the code uses an Arrhenius kinetic-controlled combustion model governed by a four-step global chemical reaction and six equilibrium reactions. Researchers efforts involve the addition of Jet-A thermophysical properties and the implementation of detailed reaction mechanisms for propane oxidation. Three different detailed reaction mechanism models are considered. The first model consists of 131 reactions and 45 species. This is considered as the full mechanism which is developed through the study of chemical kinetics of propane combustion in an enclosed chamber. The full mechanism is evaluated by comparing calculated ignition delay times with available shock tube data. However, these detailed reactions occupy too much computer memory and CPU time for the computation. Therefore, it only serves as a benchmark case by which to evaluate other simplified models. Two possible simplified models were tested in the existing computer code KIVA-2 for the same conditions as used with the full mechanism. One model is obtained through a sensitivity analysis using LSENS, the general kinetics and sensitivity analysis program code of D. A. Bittker and K. Radhakrishnan. This model consists of 45 chemical reactions and 27 species. The other model is based on the work published by C. K. Westbrook and F. L. Dryer.

Nguyen, H. L.↗
NASA NTRS1976

Accretion onto magnetized neutron stars - Structure and interchange instability of a model magnetosphere

A self-consistent model is analyzed for the spherical infall of weakly magnetized plasma into the magnetosphere of a slowly rotating, strongly magnetized neutron star. It is shown that spherical infall is probably a good approximation for X-ray sources which accrete from a stellar wind. The location of the standoff shock which halts the hypersonic infall is estimated along with the emission from the shocked layer. The location of the equilibrium magnetopause and the structure of the magnetic field within it are calculated; it is found that the magnetic poles are true cusps and that the entry of gas due to equilibrium flow across a cusp is almost certainly dominated by the interchange instability near the magnetic equator. The energy principle is applied to derive necessary conditions for the occurrence of this instability. The results indicate that the strong magnetic-pressure gradient stabilizes the gas unless moderately strong radiative cooling takes place and that the cooled plasma enters the magnetosphere as long filaments capable of moving between field lines. The rate at which the equilibrium magnetopause can 'absorb' mass and momentum is derived, the validity of the approximations employed is discussed, and the likely evolution of the sinking filaments is outlined to show that the spatial distribution of the plasma is determined mainly by the dynamics and thermodynamics of the filaments rather than the magnetic-field structure.

Arons, J.↗
NASA NTRS1975

Failure detection by pilots during automatic landing: Models and experiments

A model of the pilot as a monitor of instrument failures during automatic landing is proposed. The failure detection model consists of two stages: a linear estimator (Kalman Filter) and a decision mechanism which is based on sequential analysis. The filter equations are derived from a simplified version of the linearized dynamics of the airplane and the control loop. The perceptual observation noise is modelled to include the effects of the partition of attention among the several instruments. The final result is a simple model consisting of a high pass filter to produce the observation residuals, and a decision function which is a pure integration of the residuals minus a bias term. The dynamics of a Boeing 707 were used to simulate the fully coupled final approach in a fixed base simulator which also included failures in the airspeed, glideslope, and localizer indicators. Subjects monitored the approaches and detected the failures; their performance was compared with the predictions of the model with good agreement between the experimental data and the model.

Gai, E. G.↗
NASA NTRS1974

A model of the trapped electron population for solar minimum

A model is presented of the trapped electron environment of solar minimum conditions. Solar maximum models have been presented for the inner radiation zone (AE-5 1967), and for the outer radiation zone (AE-4 1967). The present solar minimum model consists of an inner zone model (AE-5 1975 Projected) with an epoch of 1975, and an outer zone model with an epoch of 1964. With only minor modifications this latter model is identical to the AE-4 1964 model presented previous. The model, however, has not previously been issued in computer form. AE-4 1964 is based upon satellite data, while the inner zone solar minimum model AE-5 1975 Projected consists entirely of extrapolations from AE-5 1967. While the two components of the solar minimum model have epochs 11 years part, it is assumed that any differences between the successive solar minima are smaller than the model error, and the complete model is associated with an epoch of 1975.

Teague, M. J.↗
DOE OSTI2021

Collapsar R-process Yields Can Reproduce [Eu/Fe] Abundance Scatter in Metal-poor Stars

It is unclear if neutron star mergers can explain the observed r-process abundances of metal-poor stars. Collapsars, defined here as rotating massive stars whose collapse results in a rapidly accreting disk around a black hole that can launch jets, are a promising alternative. We find that we can produce a self-consistent model in which a population of collapsars with stochastic europium yields synthesizes all of the r-process material in metal-poor ([Fe/H] < - 2.5) stars. Our model reproduces the observed scatter and evolution of scatter of [Eu/Fe] abundances. We find that if collapsars are the dominant r-process site for metal-poor stars, r-process synthesis may be linked to supernovae that produce long γ-ray bursts. Our results also allow for the possibility that core-collapse supernovae beyond those that launch γ-ray bursts also produce r-process material (e.g., potentially a subset of Type Ic-BL supernovae). Furthermore, we identify collapsar jet properties (isotropic energy, engine luminosity, or engine time) that may trace r-process yield and verify that the amount of r-process yield produced per collapsar in our model ( ~ 0.07M⊙) is consistent with other independent estimates. In the future, achieving 0.05 dex precision on distribution scatter or a reliable selection function would further constrain our probe of r-process production. Our model would also hold for another prompt r-process site with a power-law yield, and work is needed to determine if, for example, fast-merging neutron stars can also explain abundance scatter.

Astronomy & Astrophysics↗
NASA NTRS1986

An infrared reflection nebula surrounding SGS 1 in the NGC 1333 dark cloud

Strom et al. (1974) have conducted a search for infrared sources associated with Herbig-Haro objects. They found an infrared source, SGS 1, near HH 12, embedded in at least 20 visual mag of extinction in the NGC 1333 dark cloud. Various factors suggest the presence of an infrared reflection nebula. In the context of the present investigation, high spatial resolution observations in the infrared have provided the basis for the development of a consistent model for SGS which consists of a low-luminosity, cool star with an accretion disk tilted to the line of sight, and one observed reflection lobe caused by the illumination of material above one of the polar regions of the accretion disk. It is pointed out that this model is similar to that of the infrared reflection nebula GSS 30 in the Ophiuchus dark cloud.

Castelaz, M. W.↗
DOE OSTI2021

Photon pumping in a weakly-driven quantum cavity–spin system

Highlights: • We study photon frequency conversion in a driven spin coupled to a cavity mode. • Quantized frequency conversion is excpected in the strong-drive adiabatic limit. • A new photon pumping effect is established in the accessible weak drive regime. • Pumping is linked to the delocalization of the corresponding Floquet states. • Quantum coherence is preserved in both the strong and ultraweak-drive limits. We investigate the photon pumping effect in a topological model consisting of a periodically driven spin-1/2 coupled to a quantum cavity mode out of the adiabatic limit. In the strong-drive adiabatic limit, a quantized frequency conversion of photons is expected as the temporal analog of the Hall current. We numerically establish a novel photon pumping phenomenon in the experimentally accessible nonadiabatic driving regime for a broad region of the parameter space. The photon frequency conversion efficiency exhibits strong fluctuations and high efficiency that can reach up 80% of the quantized value for commensurate frequency combinations. We link the pumping properties to the delocalization of the corresponding Floquet states which display multifractal behavior as the result of hybridization between localized and delocalized sectors. Finally we demonstrate that the quantum coherence properties of the initial state are preserved during the frequency conversion process in both the strong and ultra-weak-drive limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

A Consistent BGK Model with Velocity-Dependent Collision Frequency for Gas Mixtures

Abstract We derive a multi-species BGK model with velocity-dependent collision frequency for a non-reactive, multi-component gas mixture. The model is derived by minimizing a weighted entropy under the constraint that the number of particles of each species, total momentum, and total energy are conserved. We prove that this minimization problem admits a unique solution for very general collision frequencies. Moreover, we prove that the model satisfies an H-Theorem and characterize the form of equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗