Search NASA⌕ Search

SEARCH · Search NASA

Results for “copper complexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Strategic Lifetime Tuning of Visible-Light Absorbing Two-Coordinate Metal Complexes

This paper highlights how the singlet and triplet amide ligand centered ( 1,3 LC) and interligand charge transfer ( 1,3 ICT) states in (carbene)M(amide), M = Cu, Au (cMa) complexes influence the excited state properties when the triplet states are close in energy. To that end we prepared a set of five cMa complexes, in which the amide (i.e., 5H-benzo[b]carbazole, H-BnCz) was kept constant giving a 3 LC energy of ca. 2.15 eV. Four different carbene ligands were selected to develop M BnCz Carbene complexes which have energies for the ICT state that vary from being either markedly higher, lower, or close to the energy of the 3 LC state on the amide ligand. Steady-state and time-resolved spectroscopic studies show that the emission spectrum of the cMa complex mirrors the phosphorescence of the parent H-BnCz amide and has a luminescence decay lifetime in the millisecond regime when the lowest energy excited state is 3 LC. When the lowest energy states are 1,3 ICT in nature, the emission band is broad and featureless, giving a lifetime in the nanosecond regime. As the 3 LC and 1,3 ICT states have comparable energies, dynamic equilibrium between the states is observed with the luminescence consisting of a mixture of 3 LC and 1,3 ICT transitions. The measured lifetime of this equilibrating system is between 45 and 350 μs depending on the solvent, for both copper- and gold-based cMa complexes. Furthermore, these complexes demonstrate the ability to “park” the excited state population in the 3 LC state, allowing it to act as a reservoir for thermally activated emission, while still maintaining a very rapid equilibrium between LC and ICT states.

14 SOLAR ENERGY↗
DOE OSTI2025

Metal Complex Inks for Low-Cost Photovoltaic Material Metallization

The aim of the project titled “Metal Complex Inks for Low-Cost Photovoltaic Material Metallization” was to develop new metal complex conductive inks and pastes for PV, invented and commercialized by Electroninks, Inc. (EI, Austin, TX USA, https://electroninks.com), the only global supplier and scaled-manufacturing company of these metal complex inks. These materials were developed in this work for photovoltaic applications to significantly lower the cost of metallization, improve the manufacturability, and greatly reduce metal usage, while maintaining or improving device efficiencies when compared to traditional nanoparticle-based inks. The new pastes will do so by: 1) lowering the finger resistivity and precious metals usage by printing much denser (and therefore thinner/less material) metal films than possible with traditional particle-based screen-printed pastes; 2) decreasing the firing temperature to help preserve passivation; and 3) enabling a path to move the TW-scale PV industry from Ag to other materials including Ni, Cu, and Ni/Cu alloy pastes while continuing to leverage capital investment and expertise in screen printing metallization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Mechanistic insights into the catalytic methanol steam reforming performance of Cu/ZrO 2 catalysts by in situ and operando studies

Here, we assessed the catalytic properties of the Cu/ZrO 2 interface in methanol and formaldehyde steam reforming (MSR and FSR) on powder catalysts by using a comparative approach with respect to the influence of the ZrO 2 polymorph support structure (monoclinic (m-)ZrO 2 vs. tetragonal (t-)ZrO 2 ), its synthesis routine and the choice of the precursor material on the CO 2 selectivity. Our studies reveal that ZrO 2 exhibits a pronounced versatility as a support material and its catalytic properties depend most strongly on its surface properties governed by its synthesis, especially by the choice of the Zr precursor. The way of combining the support with copper introduces an additional layer of complexity, but its influence on the MSR performance is limited to a modification of the conditions provided by the ZrO 2 support. Exploiting the comparative approach regarding the Cu-ZrO 2 catalysts in FSR and MSR – including the pure support materials – in combination with in situ Fourier transform infrared (FT-IR) spectroscopy shows that the CO observed in MSR on Cu/m-ZrO 2 can be attributed to a spillover of formaldehyde to the support. Side reactions of m-ZrO 2 are suppressed at lower temperatures due to its lack of highly reactive sites, resulting in a CO 2 -selective MSR performance. In Cu/t-ZrO 2 , however, the amount of CO is higher and a combination of a formaldehyde spillover to the support and a Cu-ZrO 2 phase boundary yielding CO leads to the lower CO 2 selectivity of these samples. An elevated number of defects and reactive Lewis acidic and Brønsted basic centers of t-ZrO 2 explains this increased activity towards side reactions in contrast to Cu/m-ZrO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dioxygen Activation Kinetics over Distinct Cu Site Types in Cu-Chabazite Zeolites

Cu-exchanged zeolites activate dioxygen to form active sites for partial methane oxidation (PMO), nitrogen oxide decomposition, and carbon monoxide oxidation. Apparent rates of O 2 activation depend both on the intrinsic kinetics of distinct Cu site types and the distributions of such sites within a given zeolite, which depend on the density and arrangement of the framework Al atoms. In this work, we use hydrothermal synthesis methods to control the arrangement of framework Al sites in chabazite (CHA) zeolites and, in turn, the distinct Cu site types formed. Time-resolved in situ Raman spectroscopy reveals the kinetics of O 2 adsorption and activation within these well-defined Cu-CHA materials and the concomitant structural evolution of copper–oxygen (Cu x O y ) complexes, which are interpreted alongside Cu(I) oxidation kinetics extracted from in situ X-ray absorption spectroscopy (XAS). Raman spectra of several plausible Cu x O y species simulated using density functional theory suggest that experimental spectra (λ ex = 532 nm) capture the formation of mono(μ-oxo)dicopper species (ZCuOCuZ). Transient experiments show that the timescales required to form Cu x O y structures that no longer change in Raman spectra correspond to the durations of oxidative treatments that maximize CH 3 OH yields in stoichiometric PMO cycles (approximately 2 h). Yet, these periods extend well beyond the timescales for the complete conversion of the initial Cu(I) intermediates to their Cu(II) states (<0.3 h, reflected in X-ray absorption near edge spectroscopy spectra), which demonstrates that Cu x O y complexes continue to evolve structurally following rapid Cu(I) oxidation. The dependence of ZCuOCuZ formation rates on O 2 pressure, H 2 O pressure, and temperature is consistent with a mechanism in which ZCuOH reduces to form ZCu + sites that bind molecular oxygen and form ZCu-O 2 intermediates. Subsequent reaction with proximate ZCu + forms bridging peroxo dicopper complexes that cleave O–O bonds to form ZCuOCuZ in steps facilitated by water. These data and interpretations provide evidence for the chemical processes that link rapid and kinetically irrelevant Cu oxidation steps (frequently probed by XAS and UV–vis spectroscopy) to the relatively slow genesis of reactive Cu complexes that form CH 3 OH during PMO. In doing so, we reveal previously unrecognized complexities in the processes by which Cu ions in zeolites activate O 2 to form active Cu x O y complexes, which underscore the insight afforded by judicious combinations of experimental and theoretical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Discovery and characterization of an acridine radical photoreductant

Not provided.Photoinduced electron transfer (PET) is a phenomenon whereby the absorption of light by a chemical species provides an energetic driving force for an electron-transfer reaction. This mechanism is relevant in many areas of chemistry, including the study of natural and artificial photosynthesis, photovoltaics and photosensitive materials. In recent years, research in the area of photoredox catalysis has enabled the use of PET for the catalytic generation of both neutral and charged organic free-radical species. These technologies have enabled previously inaccessible chemical transformations and have been widely used in both academic and industrial settings. Such reactions are often catalysed by visible-light-absorbing organic molecules or transition-metal complexes of ruthenium, iridium, chromium or copper. Although various closed-shell organic molecules have been shown to behave as competent electron-transfer catalysts in photoredox reactions, there are only limited reports of PET reactions involving neutral organic radicals as excited-state donors or acceptors. This is unsurprising because the lifetimes of doublet excited states of neutral organic radicals are typically several orders of magnitude shorter than the singlet lifetimes of known transition-metal photoredox catalysts. Here we document the discovery, characterization and reactivity of a neutral acridine radical with a maximum excited-state oxidation potential of -3.36 volts versus a saturated calomel electrode, which is similarly reducing to elemental lithium, making this radical one of the most potent chemical reductants reported. Spectroscopic, computational and chemical studies indicate that the formation of a twisted intramolecular charge-transfer species enables the population of higher-energy doublet excited states, leading to the observed potent photoreducing behaviour. Finally, we demonstrate that this catalytically generated PET catalyst facilitates several chemical reactions that typically require alkali metal reductants and can be used in other organic transformations that require dissolving metal reductants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanobodies against the metal binding domains of ATP7B as tools to study copper transport in the cell

Abstract Nanobodies are genetically engineered single domain antibodies derived from the unusual heavy-chain only antibodies found in llamas and camels. The small size of the nanobodies and flexible selection schemes make them uniquely versatile tools for protein biochemistry and cell biology. We have developed a panel of nanobodies against the metal binding domains of the human copper transporter ATP7B, a multidomain membrane protein with a complex regulation of enzymatic activity and intracellular localization. To enable the use of the nanobodies as tools to investigate copper transport in the cell, we characterized their binding sites and affinity by isothermal titration calorimetry and NMR. We have identified nanobodies against each of the first four metal binding domains of ATP7B, with a wide affinity range, as evidenced by dissociation constants from below 10−9 to 10−6 M. We found both the inhibitory and activating nanobodies among those tested. The diverse properties of the nanobodies make the panel useful for the structural studies of ATP7B, immunoaffinity purification of the protein, modulation of its activity in the cell, protein dynamics studies, and as mimics of copper chaperone ATOX1, the natural interaction partner of ATP7B.

Uhlemann, Eva-Maria E.↗
DOE OSTI2023

The Escherichia coli MFS-type transporter genes yhjE, ydiM, and yfcJ are required to produce an active bo3 quinol oxidase

Heme-copper oxygen reductases are membrane-bound oligomeric complexes that are integral to prokaryotic and eukaryotic aerobic respiratory chains. Biogenesis of these enzymes is complex and requires coordinated assembly of the subunits and their cofactors. Some of the components are involved in the acquisition and integration of different heme and copper (Cu) cofactors into these terminal oxygen reductases. As such, MFS-type transporters of the CalT family ( e . g ., CcoA) are required for Cu import and heme-Cu B center biogenesis of the cbb 3 -type cytochrome c oxidases ( cbb 3 -Cox). However, functionally homologous Cu transporters for similar heme-Cu containing bo 3 -type quinol oxidases ( bo 3 -Qox) are unknown. Despite the occurrence of multiple MFS-type transporters, orthologs of CcoA are absent in bacteria like Escherichia coli that contain bo 3 -Qox. In this work, we identified a subset of uncharacterized MFS transporters, based on the presence of putative metal-binding residues, as likely candidates for the missing Cu transporter. Using a genetic approach, we tested whether these transporters are involved in the biogenesis of E . coli bo 3 -Qox. When respiratory growth is dependent on bo 3 -Qox, because of deletion of the bd -type Qox enzymes, three candidate genes, yhjE , ydiM , and yfcJ , were found to be critical for E . coli growth. Radioactive metal uptake assays showed that Δ ydiM has a slower 64 Cu uptake, whereas Δ yhjE accumulates reduced 55 Fe in the cell, while no similar uptake defect is associated with Δ ycfJ . Phylogenomic analyses suggest plausible roles for the YhjE, YdiM, and YfcJ transporters, and overall findings illustrate the diverse roles that the MFS-type transporters play in cellular metal homeostasis and production of active heme-Cu oxygen reductases.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

A Dicopper Nitrenoid by Oxidation of a Cu'Cu' Core: Synthesis, Electronic Structure, and Reactivity

A dicopper nitrenoid complex was prepared by formal oxidative addition of the nitrenoid fragment to a dicopper(I) center by reaction with the iminoiodinane PhINTs (Ts = tosylate). This nitrenoid complex, (DPFN)Cu 2 (μ-NTs)[NTf 2 ] 2 (DPFN = 2,7-bis(fluorodi(2-pyridyl)methyl)-1,8-naphthyridine), is a powerful H atom abstractor that reacts with a range of strong C–H bonds to form a mixed-valence Cu(I)/Cu(II) μ-NHTs amido complex in the first example of a clean H atom transfer to a dicopper nitrenoid core. In line with this reactivity, DFT calculations reveal that the nitrenoid is best described as an iminyl (NR radical anion) complex. The nitrenoid was trapped by the addition of water to form a mixed-donor hydroxo/amido dicopper(II) complex, which was independently obtained by reaction of a Cu 2 (μ-OH) 2 complex with an amine through a protonolysis pathway. Furthermore, this mixed-donor complex is an analogue for the proposed intermediate in copper-catalyzed Chan–Evans–Lam coupling, which proceeds via C–X (X = N or O) bond formation. Treatment of the dicopper(II) mixed donor complex with MgPh 2 (THF) 2 resulted in generation of a mixture that includes both phenol and a previously reported dicopper(I) bridging phenyl complex, illustrating that both reduction of dicopper(II) to dicopper(I) and concomitant C–X bond formation are feasible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tetracopper σ‐Bound μ ‐Acetylide and ‐Diyne Units Stabilized by a Naphthyridine‐based Dinucleating Ligand

Abstract Reactions of a dicopper(I) tert ‐butoxide complex with alkynes possessing boryl or silyl capping groups resulted in formation of unprecedented tetracopper(I) μ ‐acetylide/diyne complexes that were characterized by NMR and UV/Vis spectroscopy, mass spectrometry and single‐crystal X‐ray diffraction. These compounds possess an unusual μ 4 ‐ η 1 : η 1 : η 1 : η 1 coordination mode for the bridging organic fragment, enforced by the rigid and dinucleating nature of the ligand utilized. Thus, the central π system remains unperturbed and accessible for subsequent reactivity and modification. This has been corroborated by addition of a fifth copper atom, giving rise to a pentacopper acetylide complex. This work may provide a new approach by which metal‐metal cooperativity can be exploited in the transformation of acetylide and diyne groups to a variety of substrates, or as a starting point for the controlled synthesis of copper(I) alkyne‐containing clusters.

Ríos, Pablo↗
DOE OSTI2023

Tetracopper σ‐Bound μ ‐Acetylide and ‐Diyne Units Stabilized by a Naphthyridine‐based Dinucleating Ligand

Abstract Reactions of a dicopper(I) tert ‐butoxide complex with alkynes possessing boryl or silyl capping groups resulted in formation of unprecedented tetracopper(I) μ ‐acetylide/diyne complexes that were characterized by NMR and UV/Vis spectroscopy, mass spectrometry and single‐crystal X‐ray diffraction. These compounds possess an unusual μ 4 ‐ η 1 : η 1 : η 1 : η 1 coordination mode for the bridging organic fragment, enforced by the rigid and dinucleating nature of the ligand utilized. Thus, the central π system remains unperturbed and accessible for subsequent reactivity and modification. This has been corroborated by addition of a fifth copper atom, giving rise to a pentacopper acetylide complex. This work may provide a new approach by which metal‐metal cooperativity can be exploited in the transformation of acetylide and diyne groups to a variety of substrates, or as a starting point for the controlled synthesis of copper(I) alkyne‐containing clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Slow Electron Spin Relaxation at Ambient Temperatures with Copper Coordinated by a Rigid Macrocyclic Ligand

Paramagnetic transition metal complexes can serve as quantum bits, storing phase information through unpaired electrons. Despite their promise, these systems often require low temperatures and tend to rapidly decohere. Recent efforts have sought to improve longitudinal relaxation (T 1 ), which provides an upper limit for phase coherence (T m ), by investigating existing literature compounds with reduced vibrational coupling and orbital angular momentum. However, synthetic strategies for improving T 1 through novel ligand design have remained scant. Here, we disclose the synthesis of a new modular macrocyclic ligand framework with four nitrogen donors (N 4 ) derived from phenanthroline that supports room-temperature coherent Cu(II) spin centers. The optimized complex more than doubles the T 1 over the next best Cu(II)-N 4 compound and exhibits a room temperature coherence time (T m ) of 0.28 μs, close to previously reported values. This performance enhancement arises from a tight binding site with short Cu–N distances, resulting in a stronger ligand field and reduced thermal accessibility of symmetric vibrational modes. This work demonstrates a practical approach to enabling spin coherence at room temperature, a factor critical to accessing relevant quantum bits and biological sensors, through a designer macrocyclic ligand platform.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Assessing the Impacts of Conformational Fluxionality on Copper(II/I) Electron Transfer Self-Exchange

Typical Cu(II/I) complexes exhibit hallmark structural changes during their electron transfer (ET) reactions that result from the (pseudo) Jahn-Teller distortions and changes in polarizability inherent to their d 10 / d 9 configurations. Given that such structural changes incur large reorganization energy penalties, slow the rates of ET are characteristic of these compounds. Notwithstanding, we recently reported a set of Cu(II/I) complexes that undergo significant and well-defined structural changes during their redox reactions yet exhibit rapid (> 10 5 M ‒1 s ‒1 ) ET self-exchange rate constants ( k 11 ). To explain these results we proposed a pre-equilibrium model in which inherent conformational fluxionality in one of the two oxidation states provides access to pathways involving lower reorganization energies during the ET event. Herein we report our results testing this hypothesis through the preparation and study of a homologous series of compounds exhibiting varying extents of con-formational fluxionality in the Cu(I) state. We characterize these compounds electrochemically, structurally, and by varia-ble temperature NMR spectroscopy to provide experimental evidence for increase fluxionality across the series. We then correlate the trend with increasing k 11 through NMR linewidth broadening experiments, further taking care to define the impacts of solvent impurities therein. Finally, the nature of the conformational rearrangements, and their relation to increased k 11 are explored computationally to reveal differential Boltzmann populations of conformers across the series. The cumulative results of these studies support a previously underappreciated strategy for overcoming barriers to slow ET kinetics: via the incorporation of conformational fluxionality.

Singh, Aditi↗
DOE OSTI2024

A Theoretical Study of Doping Evolution of Phonons in High-Temperature Cuprate Superconductors

Hole-doped high-temperature copper oxide-based superconductors (cuprates) exhibit complex phase diagrams where electronic orders like a charge density wave (CDW) and superconductivity (SC) appear at low temperatures. The origins of these electronic orders are still open questions due to their complex interplay and correlated nature. These electronic orders can modify the phonons in the system, which has also been experimentally found in several cuprates as a softening in the phonon frequency at the CDW vector. Recent experiments have revealed that the softening in phonons in cuprates due to CDW shows intriguing behavior with increasing hole doping. Hole doping can also change the underlying Fermi surface. Therefore, it is an interesting question whether the doping-induced change in the Fermi surface can affect the softening of phonons, which in turn can reveal the nature of the electronic orders present in the system. In this work, we investigate this question by studying the softening of phonons in the presence of CDW and SC within a perturbative approach developed in an earlier work. We compare the results obtained within the working model to some experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Spectroscopic Evidence of Hyponitrite Radical Intermediate in NO Disproportionation at a MOF-Supported Mononuclear Copper Site

Dianionic hyponitrite (N 2 O 2 2- ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme-copper oxidases and nitric oxide reductases. In this work, we examine the gas-solid reaction of nitric oxide with the metal–organic framework Cu I -ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N 2 O 2 .- intermediate. These results highlight the advantage provided by site-isolation in metal–organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one-electron couple in these enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic Evidence of Hyponitrite Radical Intermediate in NO Disproportionation at a MOF‐Supported Mononuclear Copper Site

Abstract Dianionic hyponitrite (N 2 O 2 2− ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme‐copper oxidases and nitric oxide reductases. In this work, we examine the gas‐solid reaction of nitric oxide with the metal–organic framework Cu I ‐ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N 2 O 2 .− intermediate. These results highlight the advantage provided by site‐isolation in metal–organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one‐electron couple in these enzymes.

Sun, Chenyue↗
DOE OSTI2020

Thermal Frequency Drift of 3D Printed Microwave Components

Fabrication of microwave slot array antennas and waveguide bandpass and notch filters using 3D printing has significant advantages in terms of speed and cost even for parts with high mechanical complexity. One disadvantage of Stereolithography (SLA) 3D printed, copper plated microwave components is that some SLA resins have a high Coefficient of Thermal Expansion (CTE), quoted in micrometers per meter per degree or 10 -6 per degree. Compared to typically used metals such as aluminum (CTE 24 × 10 -6 ·K -1 ) and copper (CTE 17 × 10 -6 ·K -1 ), SLA resin can have CTE above 100 × 10 -6 ·K -1 . Resonant structures experience significant frequency drift with temperature changes on the order of 10–50 °C. The issue of 3D printed microwave structures changing frequency characteristics significantly with temperature shift has not been addressed or reviewed in current literature. We measured and simulated the effect of temperature change on a slot array, cavity notch filters, and post loaded waveguide bandpass filters. We tested several types of SLA resin, different plating techniques, and also Direct Metal Laser Sintering (DMLS) and Binder Infusion metal 3D printing. Performance as a function of temperature is presented for these alternatives.

three-dimensional printing↗