Search NASA⌕ Search

SEARCH · Search NASA

Results for “coupled system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

The setup of an extraction system coupled to a hydrogen isotopes distillation column

Among the most difficult problems of cryogenic distillation one stands apart: the extraction of the heavy fraction. By an optimal design of the cycle scheme, this problem could be avoided. A 'worst case scenario' is usually occurring when the extracted fraction consists of one prevalent isotope such as hydrogen and small amounts of the other two hydrogen isotopes (deuterium and/or tritium). This situation is further complicated by two parameters of the distillation column: the extraction flow rate and the hold-up. The present work proposes the conceptual design of an extraction system associated to the cryogenic distillation column used in hydrogen separation processes. During this process, the heavy fraction (DT, T{sub 2}) is separated, its concentration being the highest at the bottom of the distillation column. From this place the extraction of the gaseous phase can now begin. Being filled with adsorbent, the extraction system is used to temporarily store the heavy fraction. Also the extraction system provides samples for the gas Chromatograph. The research work is focused on the existent pilot plant for tritium and deuterium separation from our institute to validate the experiments carried out until now. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

An enhanced droplet-based liquid microjunction surface sampling system coupled with HPLC-ESI-MS/MS for spatially resolved analysis

Droplet-based liquid microjunction surface sampling coupled with high-performance liquid chromatography (HPLC)-electrospray ionization (ESI)-tandem mass spectrometry (MS/MS) for spatially resolved analysis provides the possibility of effective analysis of complex matrix samples and can provide a greater degree of chemical information from a single spot sample than is typically possible with a direct analysis of an extract. Described here is the setup and enhanced capabilities of a discrete droplet liquid microjunction surface sampling system employing a commercially available CTC PAL autosampler. The system enhancements include incorporation of a laser distance sensor enabling unattended analysis of samples and sample locations of dramatically disparate height as well as reliably dispensing just 0.5 μL of extraction solvent to make the liquid junction to the surface, wherein the extraction spot size was confined to an area about 0.7 mm in diameter; software modifications improving the spatial resolution of sampling spot selection from 1.0 to 0.1 mm; use of an open bed tray system to accommodate samples as large as whole-body rat thin tissue sections; and custom sample/solvent holders that shorten sampling time to approximately 1 min per sample. Lastly, the merit of these new features was demonstrated by spatially resolved sampling, HPLC separation, and mass spectral detection of pharmaceuticals and metabolites from whole-body rat thin tissue sections and razor blade (“crude”) cut mouse tissue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unified probabilistic energy flow analysis for electricity–gas coupled systems with integrated demand response

Under a multi-energy environment, the conventional demand response programmes in smart-grid will be evolving to the concept of integrated demand response (IDR). In order to examine such an effect, this study presents a new methodological framework to conduct the probabilistic energy flow (PEF) analysis of integrated energy systems, while considering the potential effects of IDR. For this aim, a new price-elasticity-based IDR model is developed. As distinct from existing works, this study explicitly focuses on the stochastic characteristics of IDR programme and a novel Z-number-based technique is introduced to handle the relevant uncertainties that involved. The proposed Z-number model can not only capture the inherent randomness in demand-side performance but also account for the potential impact of information availability/reliability on the representation of IDR. Since the presence of Z-numbers makes the authors model include different types of uncertain representations, the fuzzy expectation technique and centroid method are jointly used to make them manageable under the same framework. A comprehensive algorithm based on the cumulant method and an optimisation scheme is employed to solve this PEF problem with consideration of IDR. The proposed framework is illustrated through numerical studies and simulation results confirm its effectiveness in actual implementations.

Zeng, Bo↗

Benchmark calculations for dissipative dynamics of a system coupled to an anharmonic bath with the multiconfiguration time-dependent Hartree method

In this paper, we present benchmark results for dissipative dynamics of a harmonic oscillator coupled to an anharmonic bath of Morse oscillators. The microscopic Hamiltonian has been chosen so that the anharmonicity can be adjusted as a free parameter, and its effect can be isolated. This leads to a temperature dependent spectral density of the bath, which is studied for ohmic and lorentzian cases. Also, we compare numerically exact multiconfiguration time-dependent Hartree results with approximate solutions using continuous configuration time-dependent self-consistent field and local coherent state approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant tunneling spectroscopy of valley eigenstates on a donor-quantum dot coupled system

We report on electronic transport measurements through a silicon double quantum dot consisting of a donor and a quantum dot. Transport spectra show resonant tunneling peaks involving different valley states, which illustrate the valley splitting in a quantum dot on a Si/SiO{sub 2} interface. The detailed gate bias dependence of double dot transport allows a first direct observation of the valley splitting in the quantum dot, which is controllable between 160 and 240 μeV with an electric field dependence 1.2 ± 0.2 meV/(MV/m). A large valley splitting is an essential requirement for implementing a physical electron spin qubit in a silicon quantum dot.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mathematical and Computational Tools for Predictive Simulation of Complex Coupled Systems under Uncertainty

Methods and algorithms are developed to enable the accurate analysis of problems that exhibit interacting physical processes with uncertainties. These uncertainties can pertain either to each of the physical processes or to the manner in which they depend on each others. These problems are cast within a polynomial chaos framework and their solution then involves either solving a large system of algebraic equations or a high dimensional numerical quadrature. In both cases, the curse of dimensionality is manifested. Procedures are developed for the efficient evaluation of the resulting linear equations that advantage of the block sparse structure of these equations, resulting in a block recursive Schur complement construction. In addition, embedded quadratures are constructed that permit the evaluation of very high-dimensional integrals using low-dimensional quadratures adapted to particular quantities of interest. The low-dimensional integration is carried out in a transformed measure space in which the quantity of interest is low-dimensional. Finally, a procedure is also developed to discover a low-dimensional manifold, embedded in the initial high-dimensional one, in which scalar quantities of interest exist. This approach permits the functional expression of the reduced space in terms of the original space, thus permitting cross-scale sensitivity analysis.

97 MATHEMATICS AND COMPUTING↗

Design and Characterization of a Lens-Coupled System for Dynamic X-Ray Diffraction

X-ray diffraction (XRD) is a necessary technique for understanding states of materials under static and dynamic loading conditions. The higher-pressure Equation of State (EOS) of many materials can only be explored via shock or ramp compression at temperatures and pressures of interest. While static XRD work has yielded EOS measurements in the 100 - 200 GPa regime, dynamic X-ray diffraction (DXRD) can explore EOS phases in the TPa regime, which closely resembles inner-core planetary conditions. DXRD hinges on the ability to measure the exact phase or phase change of a material while under dynamic loading conditions. Macroscopic diagnostic systems (e.g. velocimetry and pyrometry) can infer a phase change but not identify the specific phase entered by a material. While microscopic (atomic-level) diagnostic systems (e.g. DXRD) have been designed and implemented in Department of Energy’s (DOE) National Laboratories complex, the unique nature of Sandia National Laboratories’ Pulsed Power Facility (Z Machine) prohibits the use of such devices. The destructive nature of Z experiments presents a challenge to data capture and retrieval. Furthermore there are electromagnetic interference, X-ray background, and mechanical constraints to consider. Thus, a multi-part X-ray diagnostic for use on the Z Machine and Z-Beamlet Laser system has been designed and analyzed. Portions of this new DYnamic SCintillator Optic (DYSCO) have been built, tested and fielded. A data analysis software has been written. Finally, the radiance profile of the DYSCO’s scintillator has been characterized through experiments performed at the University of Arizona.

36 MATERIALS SCIENCE↗