Search NASA⌕ Search

SEARCH · Search NASA

Results for “crater morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Photogeology. Part A: Relative ages of some near-side and far-side terra plains based on Apollo 16 metric photography

Relative age measurements were made for 14 light plains areas, using 30X enlargements of Apollo 16 metric camera photography. Results indicate that: (1) Crater morphology and frequency studies consistently indicate that the Fra Mauro Formation has received 2.5 to 3 times as much impact flux as the Cayley Formation. (2) Crater counts and relative age dating indicate that the Cayley Formation is only slightly older than the oldest mare units. (3) Assuming the rubidium-strontium ages of Apollo 14 basalt breccias give minimum age for Fra Mauro Formation, the Cayley Formation must have been generated throughout a period of less than 100 million years, approximately 3.8 to 3.9 billion years ago. (4) The Cayley Formation ages obtained on the near side and far side are the same, indicating a synchrony throughout the moon in these units. (5) The linear relationship as predicted by the small impact erosion model between net accumulated flux and the maximum diameter of a crater that could be eroded below recognition is confirmed.

Soderblom, L. A.↗
NASA NTRS2012

Constraining the Origin of Impact Craters on Al Foils from the Stardust Interstellar Dust Collector

Preliminary examination (PE) of the aerogel tiles and Al foils from the Stardust Interstellar Dust Collector has revealed multiple impact features. Some are most likely due to primary impacts of interstellar dust (ISD) grains, and others are associated with secondary impacts of spacecraft debris, and possibly primary impacts of interplanetary dust particles (IDPs) [1, 2]. The current focus of the PE effort is on constraining the origin of the individual impact features so that definitive results from the first direct laboratory analysis of contemporary ISD can be reported. Because crater morphology depends on impacting particle shape and composition, in addition to the angle and direction of impact, unique particle trajectories are not easily determined. However, elemental analysis of the crater residues can distinguish real cosmic dust from the spacecraft debris, due to the low cosmic abundance of many of the elements in the spacecraft materials. We present here results from the elemental analysis of 24 craters and discuss the possible origins of 4 that are identified as candidate ISD impacts

Stroud, Rhonda M.↗
NASA NTRS2006

Passive imaging based multi-cue hazard detection spacecraft safe landing

Accurate assessment of potentially damaging ground hazards during the spacecraft EDL (Entry, Descent and Landing) phase is crucial to insure a high probability of safe landing. A lander that encounters a large rock, falls off a cliff, or tips over on a steep slope can sustain mission ending damage. Guided entry is expected to shrink landing ellipses from 100-300 km to -10 km radius for the second generation landers as early as 2009. Regardless of size and location, however, landing ellipses will almost always contain hazards such as craters, discontinuities, steep slopes, and large rocks. It is estimated that an MSL (Mars Science Laboratory)-sized lander should detect and avoid 16- 150m diameter craters, vertical drops similar to the edges of 16m or 3.75m diameter crater, for high and low altitude HAD (Hazard Detection and Avoidance) respectively. It should also be able to detect slopes 20' or steeper, and rocks 0.75m or taller. In this paper we will present a passive imaging based, multi-cue hazard detection and avoidance (HDA) system suitable for Martian and other lander missions. This is the first passively imaged HDA system that seamlessly integrates multiple algorithm-crater detection, slope estimation, rock detection and texture analysis, and multicues- crater morphology, rock distribution, to detect these hazards in real time.

hazard detection↗
NASA NTRS2017

Young Lunar Volcanism: Irregular Mae Patches as Drained Lava Ponds and Inflated Flows

Irregular mare patches (IMPs) were previously proposed as sites of young lunar volcanism and/or endogenic activity [1-3], raising the possibility that volcanism on the Moon may not have ended approximately 1 Ga as determined from surface ages [4]. The wide-spread occurrence of more than 70 IMPs on the lunar nearside suggests a correlation with Th-rich PKT regions and a basaltic composition [1,2]. IMPs exhibit at least two types of deposit morphologies: (a) dome-like, steep-sided and smooth mounds and (b) low-relief ropy (LRR) to hummocky (LRH) materials (Fig. 1). Morphologic indicators such as steep (>40 deg) margin slopes across distances <10 m and crisp boundaries imply ages less than a few 100 Ma [e.g.,1-3]. The IMPs also have relatively few superposed craters >10 m in diameter, and young absolute model ages, which when combined with their superposition on young crater deposits like the continuous ejecta of Aristarchus crater, imply ages approximately 10 Ma to 100 Ma [1,2]. However, the mounds do not exhibit blocky crater morphologies, nor fracturing typical of young volcanic deposits, and the mound texture resembles that of mature regolith [e.g., 2,5], implying a much older age (approximately 3.5 Ga). These contrasting indicators have led to the proposal of widely varying formation mechanisms that range from ancient volcanism modified by recent tectonism [6] or outgassing [3,7], ancient volcanism of atypical materials [8], to Copernican-era volcanism [1,2].

Stopar, J. D.↗
NASA NTRS1992

Glaciation in Elysium

Results of a study of high resolution Viking Orbiter images of the northwestern slopes of Elysium Mons, using a variety of image analysis techniques, provide striking evidence of an extended period of glaciation that involved a large ice sheet of greater than 1.2 km thickness and subice fluvial activity that contributed to the formation of the channels of Hrad Valles and Granicus Valles. These two unusual channel systems begin on the lower slopes of Elysium Mons and extend into Utopia Planitia in the region lying between 215 and 230 degs W and between 25 and 45 degs N. Key indicators are the presence of serrated volcanic constructs whose dimensions and morphology indicate an origin involving successive, localized, subice fissure eruptions. The channels visible in Hrad Valles bear a striking resemblance to subice fluvial features found in the dry valleys of Antarctica at the periphery of this massive continental ice sheet. Crater size distributions and crater morphologies are quite consistent with this interpretation, as are certain other topographic features suggesting the presence in the past of ice-rich permafrost that, while having undergone significant degradation, still remains.

Anderson, Duwayne M.↗
NASA NTRS1987

The surface age of Venus: Applying the terrestrial cratering rate

The population of Venusian craters having suspected impact crater morphology has been reported from 115 x 10 to the 6th power sq km of the northern hemisphere of the planet with the estimated average age of the surface to be approx. 1 b.y. (+ or - 0.5 b.y.) on the basis of lunar crater production curves corrected for Venus. Such an old average age is somewhat difficult to reconcile with the similarity in size and mass of Venus and Earth and with Earth's high heat flow and crustal resurfacing rate. Given the present uncertainties in the role of both active and inactive comet nuclei in the cratering history of Earth, it is concluded that the average age of the observed surface in the northern hemisphere of Venus could be as great as the 450 m.y. mean age of the Earth's crust. The surface of Venus might be even older, but no evidence from the crater observations support an age as great as 1 b.y.

Schaber, Gerald G.↗
NASA NTRS1986

Bilateral symmetry of circular impact structures of astroblemes

The relief of the true crater-bottom and the distribution of impactites and allogenic breccias for the Popigay and Kara astroblemes is examined. It is shown that the crater morphology and the distribution of ejecta of fragmented and melted masses has a series of features of symmetry in common with lunar analogs of large astroblemes, formed as a result of an oblique impact, as well as with impact and impact-explosive craters. This leads to the conclusion that both structures were formed as a result of oblique impact of meteoroid bodies; the trajectory projection of the body which formed the Popigay crater had an azimuth of 200 + or - 10 deg., while this azimuth for the Kara crater was 50 + or - 10 deg.

Masaytis, V. L.↗
NASA NTRS1979

The terrestrial cratering record. I - Current status of observations

The location, size and principle characteristics of the currently known proven and probable terrestrial impact craters are compiled. A crater is classified as proven if the structure is associated with meteoritic fragments, and probable if shock metamorphic effects are observed in the target rocks. Proven impact structures have been found to be Pleistocene to Recent in age, while probable impact structures range from Precambrian to Pleistocene. Diameter and age relationships are used to show that a 20 km impact structure will be recognizable as a crater for up to 600 million years, and smaller structures will have shorter lifetimes. Depth-diameter relationships for terrestrial craters show them to be intrinsically shallower than their lunar counterparts, and a transition in crater morphology from simple, or bowl-shaped with an uplifted rim, to complex, with an uplifted center and a depressed rim, is observed with increasing diameter. Shock metamorphic studies have lead to the identification of the type of bolide at a number of probable impact craters, supporting meteoritic origins.

Grieve, R. A. F.↗
NASA NTRS1995

The effect of impact angle on craters formed by hypervelocity particles

The Space Power Institute (SPI) at Auburn University has conducted experiments on the effects of impact angle on crater morphology and impactor residue retention for hypervelocity impacts. Copper target plates were set at angles of 30 deg, 45 deg, 60 deg, and 75 deg from the particle flight path. For the 30 deg and 45 deg impacts, in the velocity regime greater than 8 km s(exp -1) the resultant craters are almost identical to normal incidence impacts. The only difference found was in the apparent distribution of particle residue within the crater, and further research is needed to verify this. The 60 deg and 75 deg impacts showed marked differences in crater symmetry, crater lip shape, and particle residue distribution in the same velocity regime. Impactor residue shock fractionation effects have been quantified in first-order. It is concluded that a combination of analysis techniques can yield further information on impact velocity, direction, and angle of incidence.

Hill, David C.↗
NASA NTRS2022

A Lack of Spin-Orbit Signal in the Morphology of Mercury's Large Craters

The spatial structure of Mercury's thermal lithosphere depends on the balance between internal heat and surface temperature as controlled by solar insolation. For bodies not in a spin-orbital resonance, observed spatial temperature variations are due to internal heating variations. However, for Mercury's present 3:2 spin-orbit coupling a notable difference of ~150 K exists for the sub-skin depth temperature of the crust as a function of longitude (Fig 1B.; [1,2]). Mercury's longitudinal "hot poles" and "cold poles", in addition to the standard poles (i.e. North and South), have large temperature contrasts that could lead to systematic differences in crater size, morphology, or morphometry, especially for large impacts.

Mercury↗
NASA NTRS1993

Geomorphic evolution of the Martian highlands through ancient fluvial processes

The evolution of crater degradation in the Martian highlands based on variations in crater morphology is traced. The timing of this process related to geology, elevation, and latitude is examined, the nature of fluvial resurfacing is studied, and the approximate rate of denudation is determined. The obtained data make it possible to understand the early geologic history of Mars, the interaction between the atmosphere and surface processes through time, and the nature of highland surface materials. Degradation was found to begin with sheet-flooding and the formation of runoff channels in both the interior and exterior of the craters. Progressive stripping of the ejecta material led to craters with incised rims. Erosion and infilling led to flat doors. With time, continued erosion removed ejecta and rim materials completely. Timing of degradation based on cumulative size-frequency distribution curves of highland crater population indicates that the process ceased completely in the late Hesperian. Global average denudation rates were found to be between 0.0001 and 0.005 mm/yr.

Craddock, Robert A.↗
NASA NTRS2006

SIMS Studies of Allende Projectiles Fired into Stardust-type Aluminum Foils at 6 km/s

We have explored the feasibility of C-, N-, and O-isotopic measurements by NanoSIMS and of elemental abundance determinations by TOF-SIMS on residues of Allende projectiles that impacted Stardust-type aluminum foils in the laboratory at 6 km/s. These investigations are part of a consortium study aimed at providing the foundation for the characterization of matter associated with micro-craters that were produced during the encounter of the Stardust space probe with comet 81P/Wild 2. Eleven experimental impact craters were studied by NanoSIMS and eighteen by TOF-SIMS. Crater sizes were between 3 and 190 microns. The NanoSIMS measurements have shown that the crater morphology has only a minor effect on spatial resolution and on instrumental mass fractionation. The achievable spatial resolution is always better than 200 nm, and C- and O-isotopic ratios can be measured with a precision of several percent at a scale of several 100 nm, the typical size of presolar grains. This clearly demonstrates that presolar matter, provided it survives the impact into the aluminum foil partly intact, is recognizable even if embedded in material of Solar System origin. TOF-SIMS studies are restricted to materials from the crater rim. The element ratios of the major rockforming elements in the Allende projectiles are well characterized by the TOF-SIMS measurements, indicating that fractionation of those elements during impact can be expected to be negligible. This permits information on the type of impactor material to be obtained. For any more detailed assignments to specific chondrite groups, however, information on the abundances of the light elements, especially C, is crucial.

Hoppe, Peter↗
NASA NTRS1992

The Martian impact cratering record

A detailed analysis of the Martian impact cratering record is presented. The major differences in impact crater morphology and morphometry between Mars and the moon and Mercury are argued to be largely the result of subsurface volatiles on Mars. In general, the depth to these volatiles may decrease with increasing latitude in the southern hemisphere, but the base of this layer may be at a more or less constant depth. The Martial crustal dichotomy could have been the result of a very large impact near the end of the accretion of Mars. Monte Carlo computer simulations suggest that such an impact was not only possible, but likely. The Martian highland cratering record shows a marked paucity of craters less than about 30 km in diameter relative to the lunar highlands. This paucity of craters was probably the result of the obliteration of craters by an early period of intense erosion and deposition by aeolian, fluvial, and glacial processes.

Strom, Robert G.↗
NASA NTRS1994

Craters in aluminum 1100 targets using glass projectiles at 1-7 km/s

We report on impact experiments using soda-lime glass spheres of 3.2 mm diameter and aluminum targets (1100 series). The purpose is to assist in the interpretation of LDEF instruments and in the development of future cosmic-dust collectors in low-Earth orbit. Because such instruments demand understanding of both the cratering and penetration process, we typically employ targets with thicknesses that range from massive, infinite half-space targets, to ultrathin films. This report addresses a subset of cratering experiments that were conducted to fine-tune our understanding of crater morphology as a function of impact velocity. Also, little empirical insight exists about the physical distribution and shock-metamorphism of the impactor residues as a function of encounter speed, despite their recognized significance in the analysis of space-exposed surfaces. Soda-lime glass spheres were chosen as a reasonable analog to extraterrestrial silicates, and aluminum 1100 was chosen for targets, which among the common Al-alloys, best represents the physical properties of high-purity aluminum. These materials complement existing impact studies that typically employed metallic impactors and less ductile Al-alloys. We have completed dimensional analyses of the resulting craters and are in the process of investigating the detailed distribution of the unmelted and melted impactor residues via SEM methods, as well as potential compositional modifications of the projectile melts via electron microprobe.

Bernhard, R. P.↗
NASA NTRS1974

Morphology of lunar craters - A test of lunar erosional models

The present work is a test of published theoretical and experimental studies of crater erosion by micrometeorite bombardment which predict systematic variations in the morphology of lunar craters as a function of crater diameter and crater age. Numerical, ranking-type degradation classifications indicate that the craters on Mare Imbrium and Mare Tranquillitatis confirm these predictions by showing a systematic increase in degradation with decreasing diameter for craters smaller than a few kilometers in diameter but larger than the equilibrium diameter, and by showing fixed proportions of fresh, moderately degraded, and very degraded craters under equilibrium conditions. Furthermore, the relative ages of the two mare surfaces may be determined using a diameter/mean-degradation-number curve. These determinations of relative age and process of crater erosion are both essentially independent of the traditionally studied crater diameter/frequency relationships.

Mcgill, G. E.↗
NASA NTRS1978

Interior morphology of fresh Martian craters - The effects of target characteristics

The interior morphology of 183 fresh Martian craters observed on Viking imagery was studied. Freshness was determined by rim sharpness and continuity according to the scheme used to classify lunar and Mercurian craters. Results indicate that central-peak and wall degradation features are more common than previously thought. Central peaks are observed in craters as small as 2 km in diameter and in nearly all fresh craters with diameters greater than 10 km. Scallops or terraces are found to occur in all craters with diameters greater than 20 km, and wall slumping seems common in craters from 5 to 10 km in diameter. The ratio of crater diameter to crater floor diameter is significantly larger than for lunar craters. Central peaks and pits are more frequent in craters formed in cratered terrain than in those formed on plains; wall failure occurs at smaller diameters in plains craters. It is suggested that these peculiarities of crater interior morphologies may be due to a subsurface volatile layer. The influence of target variations on the interior morphologies observed in fresh craters was studied. Preliminary results indicate well-defined effects due to target differences.

Wood, C. A.↗
NASA NTRS1971

South polar and equatorial differences in central peaked Martian craters.

Description of the results of a preliminary study of the distribution of central peaked Martian craters based on photographs taken by Mariner 6 and 7. The study provides information about the origin of these craters and about the geological processes occurring on the surface of Mars. It is pointed out that central peaks in Martian craters in the south polar region occur more frequently than their equatorial counterparts and the peak frequency statistics and crater morphologies imply that preferential peak production has taken place.

Cordell, B. M.↗