Search NASA⌕ Search

SEARCH · Search NASA

Results for “cross section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Neutron-induced fission cross section of {sup 234}U and {sup 237}Np measured at the CERN Neutron Time-of-Flight (n{sub T}OF) facility

A high-resolution measurement of the neutron-induced fission cross section of {sup 234}U and {sup 237}Np has been performed at the CERN Neutron Time-of-Flight facility. The cross sections have been determined in a wide energy range from 1 eV to 1 GeV using the evaluated {sup 235}U cross section as reference. In these measurements the energy determination for the {sup 234}U resonances could be improved, whereas previous discrepancies for the {sup 237}Np resonances were confirmed. New cross-section data are provided for high neutron energies that go beyond the limits of prior evaluations, obtaining important differences in the case of {sup 237}Np.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total Cross Sections as a Surrogate for Neutron Capture: An Opportunity to Accurately Constrain (n,γ) Cross Sections for Nuclides Beyond the Reach of Direct Measurements

There are many (n,γ) cross sections of great interest to radiochemical diagnostics and to nuclear astrophysics which are beyond the reach of current measurement techniques, and likely to remain so for the foreseeable future. In contrast, total neutron cross sections currently are feasible for many of these nuclides and provide almost all the information needed to accurately calculate the (n,γ) cross sections via the nuclear statistical model (NSM). I demonstrate this for the case of 151 Sm; NSM calculations constrained using average resonance parameters obtained from total cross section measurements made in 1975, are in excellent agreement with recent 151 Sm (n,γ) measurements across a wide range of energy. Furthermore, I demonstrate through simulations that total cross section measurements can be made at the Manuel Lujan Jr. Neutron Scattering Center at the Los Alamos Neutron Science Center for samples as small as 10μg. Samples of this size should be attainable for many nuclides of interest. Finally, I estimate that over half of the radionuclides identified ~20 years ago as having (n,γ) cross sections of importance to s-process nucleosynthesis studies (24/43) and radiochemical diagnostics (11/19), almost none of which have been measured, can be constrained using this technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the ZZ production cross section in pp̄ collisions at √s=1.96 TeV

We present a new measurement of the production cross section σ(pp̄→ZZ) at a center-of-mass energy s√=1.96 TeV, obtained from the analysis of the four charged lepton final state l⁺l⁻l'⁺l'⁻ (l, l'=e or μ). We observe ten candidate events with an expected background of 0.37±0.13 events. The measured cross section σ(pp̄→ZZ)=1.26 +0.47 -0.37 (stat)±0.14(syst) pb is in agreement with NLO QCD predictions. This result is combined with a previous result from the ZZ→l⁺l⁻νν¯ channel resulting in a combined cross section of σ(pp̄→ZZ)=1.40 +0.43 -0.37 (stat)±0.14(syst) pb.

Abazov, V. M.↗

Measurement of the B{sup 0} Production Cross Section in pp Collisions at {radical}(s)=7 TeV

Measurements of the differential production cross sections d{sigma}/dp{sub T}{sup B} and d{sigma}/dy{sup B} for B{sup 0} mesons produced in pp collisions at {radical}(s)=7 TeV are presented. The data set used was collected by the CMS experiment at the LHC and corresponds to an integrated luminosity of 40 pb{sup -1}. The production cross section is measured from B{sup 0} meson decays reconstructed in the exclusive final state J/{psi}K{sub S}{sup 0}, with the subsequent decays J/{psi}{yields}{mu}{sup +}{mu}{sup -} and K{sub S}{sup 0}{yields}{pi}{sup +}{pi}{sup -}. The total cross section for p{sub T}{sup B}>5 GeV and |y{sup B}|<2.2 is measured to be 33.2{+-}2.5{+-}3.5 {mu}b, where the first uncertainty is statistical and the second is systematic.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Zirconium Nuclear Data Campaign: Measurement of 90 Zr ( n, γ ) Cross Section

The isotopes of Zr with A = [90, 91, 92, 94] make up more than 97% of naturally occurring Zr and are important to many nuclear applications such as nuclear reactors. One of the attractive qualities of naturally occurring Zr isotopes is that they have a low σ γ /σ t ratio at most neutron energies. Thus, they improve the neutron economy in reactors by preferentially scattering neutrons rather than absorbing them. This same quality also presents a challenge to measuring the capture cross section, σ γ , of Zr isotopes. The ENDF/B VIII.0 library has a relative uncertainty of approximately 10–20% for incident neutron energies < 0.1 MeV and an uncertainty greater than 20% for energies > 0.1 MeV for the majority of natural Zr isotopes. This motivated the Nuclear Criticality Safety Program to embark on a campaign to accurately measure and evaluate these Zr isotopes. In this work, we demonstrate energy-dependent neutron capture cross section measurements for the first enriched sample to be measured: 90 Zr.

07 ISOTOPE AND RADIATION SOURCES↗

Neutrino and antineutrino inclusive charged-current cross section measurements with the MINOS near detector

The energy dependence of the neutrino-iron and antineutrino-iron inclusive charged-current cross sections and their ratio have been measured using a high-statistics sample with the MINOS near detector exposed to the NuMI beam from the main injector at Fermilab. Neutrino and antineutrino fluxes were determined using a low hadronic energy subsample of charged-current events. We report measurements of {nu}-Fe ({nu}-Fe) cross section in the energy range 3-50 GeV (5-50 GeV) with precision of 2%-8% (3%-9%) and their ratio which is measured with precision 2%-8%. The data set spans the region from low energy, where accurate measurements are sparse, up to the high-energy scaling region where the cross section is well understood.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of gluon–gluon fusion and vector-boson fusion Higgs boson production cross-sections in the H → WW &lowast; → eνμν decay channel in pp collisions at s = 13 TeV with the ATLAS detector

Higgs boson production cross-sections in proton–proton collisions are measured in the H → WW &lowast; → eνμν decay channel. The proton–proton collision data were produced at the Large Hadron Collider at a centre-of-mass energy of 13 TeV and recorded by the ATLAS detector in 2015 and 2016, corresponding to an integrated luminosity of 36.1fb -1 . The product of the H→WW &lowast; branching fraction times the gluon–gluon fusion and vector-boson fusion cross-sections are measured to be 11.4$_{-1.1}^{+1.2}$(stat.)$_{-1.7}^{+1.8}$(syst.) pb and 0.50$_{-0.22}^{+0.24}$(stat.)±0.17(syst.) pb, respectively, in agreement with Standard Model predictions.

Aaboud, M.↗

Influence of Surface Preparation on Scanning Kelvin Probe Microscopy and Electron Backscatter Diffraction Analysis of Cross Sections of CdTe/CdS Solar Cells: Preprint

In this work we investigated different methods to prepare cross sections of CdTe/CdS solar cells for EBSD and SKPM analyses. We observed that procedures used to prepare surfaces for EBSD are not suitable to prepare cross sections, and we were able to develop a process using polishing and ion-beam milling. This process resulted in very good results and allowed us to reveal important aspects of thecross section of the CdTe film. For SKPM, polishing and a light ion-beam milling resulted in cross sections that provided good data. We were able to observe the depletion region on the CdTe film and the p-n junction as well as the interdiffusion layer between CdTe and CdS. However, preparing good-quality cross sections for SKPM is not a reproducible process, and artifacts are often observed.

14 SOLAR ENERGY↗

Differential cross sections and spin density matrix elements for {gamma}p {yields} {phi}p from CLAS

Preliminary differential cross-sections and the {rho}{sub MM'}{sup 0} spin density matrix elements (SDME) for the reaction {gamma}{rho} {yields} {phi}p for both charged-({phi} {yields} K{sup +}K-) and neutral-mode ({phi} {yields} K{sub L}{sup 0}K{sub S}{sup 0}) topologies obtained from CLAS are presented. Our kinematic coverage is from near production threshold ({radical}(s){approx}1.97 GeV) to ({radical}(s) 2.84 GeV), with a wide coverage in the production angle. As seen in previous LEPS results, the differential cross-sections show a localized 'bump' between ({radical}(s){approx}2 and 2.2 GeV that is not expected from a simple Pomeron exchange picture. Comparisons between the charged- and neutral-mode results and possible effects from the K{sup +}{Lambda}(1520) channel are discussed. Our SDME results confirm the well-known deviations from t-channel helicity conservation (TCHC) for Pomeron exchange, but s-channel helicity conservation (SCHC) is also seen to be broken.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Field Quality and Fabrication Analysis of HQ02 Reconstructed Nb3Sn Coil Cross Sections

© 2017 IEEE. The U.S. LHC Accelerator Research Program (LARP) quadrupole HQ02 was designed and fully tested as part of the low-beta quad development for Hi-Lumi LHC. HQ02's design is well documented with full fabrication accounting along with full field analysis at low and high current. With this history, HQ02 is an excellent test bed for developing a methodology for measuring turn locations from magnet cross sections and comparing with CAD models and measured field. All four coils of HQ02 were cut in identical locations along the magnetic length corresponding to magnetic field measurement and coil metrology. A real-time camera and coordinate measuring equipment was used to plot turn corners. Measurements include systematic and random displacements of winding blocks and individual turns along the magnetic length. The range of cable shifts and the field harmonic range along the length are in agreement, although correlating turn locations and measured harmonics in each cross section is challenging.

Holik, Eddie Frank↗

Measurement of the WW+WZ production cross section using a matrix element technique in lepton+jets events

We present a measurement of the WW+WZ production cross section observed in a final state consisting of an identified electron or muon, two jets, and missing transverse energy. The measurement is carried out in a data sample corresponding to up to 4.6 fb{sup -1} of integrated luminosity at {radical}(s)=1.96 TeV collected by the CDF II detector. Matrix element calculations are used to separate the diboson signal from the large backgrounds. The WW+WZ cross section is measured to be 17.4{+-}3.3 pb in agreement with standard model predictions. A fit to the dijet invariant mass spectrum yields a compatible cross section measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron-impact-ionization cross sections for excited states of B{sup q+} (q=0-2) and an investigation into n scaling of ionization cross sections

Nonperturbative R-matrix-with-pseudostates (RMPS) and time-dependent close-coupling (TDCC) methods are used to determine electron-impact-ionization cross sections for the excited states of B, B{sup +}, and B{sup 2+}. RMPS calculated cross sections are presented for the 1s{sup 2}2s{sup 2}3l and 1s{sup 2}2s{sup 2}4l configurations of B, the 1s{sup 2}2s3l and 1s{sup 2}2s4l configurations of B{sup +}, and the 1s{sup 2}3l, 1s{sup 2}4l, and 1s{sup 2}5l configurations of B{sup 2+}. It is shown that the TDCC-calculated cross sections for the 1s{sup 2}2s{sup 2}3s configuration of B, the 1s{sup 2}2s3s configuration of B{sup +}, and the 1s{sup 2}3s configuration of B{sup 2+} are in reasonable agreement with the RMPS results. Furthermore, n scaling of these nonperturbative cross sections is investigated and a scheme proposed to allow for the extrapolation of electron-impact-ionization cross sections to higher n shells. Two semiempirical ionization cross-section expressions are fitted to the peak of the highest n-bundled RMPS cross sections for B, B{sup +}, and B{sup 2+}. These are subsequently used for accurate evaluation of the higher n-shell ionization cross sections needed to obtain temperature- and density-dependent generalized collisional-radiative ionization coefficients for the impurity and transport modeling of magnetic fusion plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗

First measurement of unpolarized semi-inclusive deep-inelastic scattering cross sections from a He 3 target [First measurement of unpolarized SIDIS cross section from a 3 He target]

Here, the unpolarized semi-inclusive deep-inelastic scattering (SIDIS) differential cross sections in 3 He(e,e'π ± )X have been measured for the first time in Jefferson Lab experiment E06-010 with a 5.9 GeV e – beam on a 3 He gas target. The experiment focuses on the valence quark region, covering a kinematic range 0.12 < x bj < 0.45,1 < Q 2 < 4(GeV/c) 2 ,0.45 < z h < 0.65, and 0.05 < P t < 0.55GeV/c. The extracted SIDIS differential cross sections of π± production are compared with existing phenomenological models while the 3 He nucleus approximated as two protons and one neutron in a plane-wave picture, in multidimensional bins. Within the experimental uncertainties, the azimuthal modulations of the cross sections are found to be consistent with zero.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross-Section Comparison for Pu-238 Production in the Advanced Test Reactor at Idaho National Laboratory

Qualification of Advanced Test Reactor (ATR) positions for Pu-238 production has been ongoing at Idaho National Laboratory (INL). The ATR qualifications have stretched over multiple years during which new techniques have been developed and made available for ATR experiment neutronic analysis. As part of the transition to newer codes, new cross-section libraries have been evaluated for use in the Pu-238 production experiment analysis. A comparative study was done using the MCNP ORGIEN Activation Analysis (MOAA) tool between ENDF/B-VII.0 and ENDF/B-VIII.0 cross sections to capture the impact of the change in cross-sections on the analysis needed to qualify Pu-238 production targets. All comparisons were done assuming the ATR GEN-I targets were located in the south flux trap of the ATR. Finally, an overview of how this qualification and potential irradiation fits into Pu-238 is discussed.

07 ISOTOPE AND RADIATION SOURCES↗