Search NASA⌕ Search

SEARCH · Search NASA

Results for “current commutation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Energy Implications of Current Travel and the Adoption of Automated Vehicles

Current travel patterns and energy usage could be dramatically disrupted by new vehicle technologies, specifically in the case of automated vehicle (AV) technology. AV development is rapidly progressing and some experts anticipate it will be widely available to the public within 10 to 30 years (Litman and Litman 2018; Bansal and Kockelman 2017). This transformation in transportation could have a significant impact on the way people travel and potentially on overall energy consumption. AV adoption could have a wide range of potential energy implications, depending on their usage and the efficiency of the AVs. To better understand these implications, a random survey of more than 1,000 adults living in the continental United States was conducted for the National Renewable Energy Laboratory (NREL) using the Opinion Research Corporation (ORC) survey methodology (See A.1). While other survey efforts at the time of the study broadly investigated the barriers to acceptance of AVs, this study uniquely investigated how the technology will affect driving and commuting habits. The results were analyzed to better understand which groups of people will likely adopt AV technology first, how respondents currently travel, and how respondents may change their travel patterns if AVs are widely adopted.

33 ADVANCED PROPULSION SYSTEMS↗

Manufacturing tolerances for natural laminar flow airframe surfaces

Published aircraft surface waviness and boundary layer transition measurements imply that currently achievable low levels of surface waviness are compatible with the natural laminar flow (NLF) requirements of business and commuter aircraft, in the cases of both metallic and composite material airframes. The primary challenge to the manufacture of NLF-compatible surfaces is two-dimensional roughness in the form of steps and gaps at structural joints. Attention is presently given to recent NASA investigations of manufacturing tolerance requirements for NLF surfaces, including flight experiment results.

Holmes, B. J.↗

Primordial fluctuations from deformed quantum algebras

We study the implications of deformed quantum algebras for the generation of primordial perturbations from slow-roll inflation. Specifically, we assume that the quantum commutator of the inflaton's amplitude and momentum in Fourier space gets modified at energies above some threshold M{sub *}. We show that when the commutator is modified to be a function of the momentum only, the problem of solving for the post-inflationary spectrum of fluctuations is formally equivalent to solving a one-dimensional Schr and quot;odinger equation with a time dependent potential. Depending on the class of modification, we find results either close to or significantly different from nearly scale invariant spectra. For the former case, the power spectrum is characterized by step-like behaviour at some pivot scale, where the magnitude of the jump is O(H{sup 2}/M{sub *}{sup 2}). (H is the inflationary Hubble parameter.) We use our calculated power spectra to generate predictions for the cosmic microwave background and baryon acoustic oscillations, hence demonstrating that certain types of deformations are incompatible with current observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Geometric momentum: The proper momentum for a free particle on a two-dimensional sphere

In Dirac's canonical quantization theory on systems with second-class constraints, the commutators between the position, momentum, and Hamiltonian form a set of algebraic relations that are fundamental in construction of both the quantum momentum and the Hamiltonian. For a free particle on a two-dimensional sphere or a spherical top, results show that the well-known canonical momentum p{sub {theta}} breaks one of the relations, while three components of the momentum expressed in the three-dimensional Cartesian system of axes as p{sub i} (i=1,2,3) are satisfactory all around. This momentum is not only geometrically invariant but also self-adjoint, and we call it geometric momentum. The nontrivial commutators between p{sub i} generate three components of the orbital angular momentum; thus the geometric momentum is fundamental to the angular one. We note that there are five different forms of the geometric momentum proposed in the current literature, but only one of them turns out to be meaningful.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Small transport aircraft technology. A report for the committee on commerce, science, and transportation, United States Senate

A preliminary assessment of the research and technology that NASA could undertake to improve small transport aircraft is presented. The advanced technologies currently under study for potential application to the small transport aircraft of the future are outlined. Background information on the commuter and shorthaul local service air carriers, the regulations pertaining to their aircraft and operations, and the overall airline system interface is included.

Source record↗

Commutated automatic gain control system

The commutated automatic gain control (AGC) system was designed and built for the prototype Loran-C receiver is discussed. The current version of the prototype receiver, the Mini L-80, was tested initially in 1980. The receiver uses a super jolt microcomputer to control a memory aided phase loop (MAPLL). The microcomputer also controls the input/output, latitude/longitude conversion, and the recently added AGC system. The AGC control adjusts the level of each station signal, such that the early portion of each envelope rise is about at the same amplitude in the receiver envelope detector.

Yost, S. R.↗

Power Module Precursors and Prognostics

The ongoing work involves 1) the identification and evaluation of various electric signals as indicators to module failure and precursors to aging, and 2) the development of corresponding detection techniques. In the current phase, 1) the increase of on-state resistance is selected as the precursor to the power cycle aging of silicon carbide power MOSFET modules based on review and rest data. 2) A detection method leveraging the gate voltage fluctuations magnitude during commutation transients to inform the on-state resistance increase is investigated which has the benefit of being able to be integrated into the gate driver. A dedicated detection circuit for implementation is designed and simulated and is currently in fabrication.

ADVANCED PROPULSION SYSTEMS↗

Noncommutative fermions and quarkonia decays

The recent introduction of a deformed nonminimal version of the noncommutative standard model in the enveloping-algebra approach, having a one-loop renormalizable gauge sector involving a higher order gauge term, motivates us to consider the possibility of extending the fermion sector with additional deformations, i.e. higher order fermionic terms. Since the renormalizability properties of the fermion sector of the model are not yet fully known, we work with an effective fermion Lagrangian, which includes noncommutative higher order terms involving a contraction with the noncommutative {theta} tensor aside from the star products, so that these terms annihilate in the commutative limit. Some of these terms violate CPT in the weak sector, and some violate CP in the strong and hypercharge sectors. We apply this framework to the re-evaluation of the decay rates of quarkonia (qq{sub 1}=J/{psi}, {upsilon}) into two photons. These decays, which are forbidden in the ordinary standard model, had been previously studied as possible signals for noncommutativity, but not in the framework of the better behaved deformed nonminimal version of the noncommutative standard model. Weak CPT or strong-hypercharge CP violating interactions do not contribute to the result. If the parameters of the model take natural values, for the vast majority of configurations the resulting branching ratios are enhanced with respect to their values in the minimal version of the noncommutative standard model. Also for more than half of the parameter space, the rates are larger than the maximal rates that were calculated in the undeformed version of the nonminimal noncommutative standard model. Tuning the dimensionless parameters the predicted branching ratios can fall within the current experimental bounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preliminary control law and hardware designs for a ride quality augmentation system for commuter aircraft. Phase 2

The continued investigation of the design of Ride Quality Augmentation Systems (RQAS) for commuter aircraft is described. The purpose of these RQAS is the reduction of the vertical and lateral acceleration response of the aircraft due to atmospheric turbulence by the application of active control. The current investigations include the refinement of the sample data feedback control laws based on the control-rate-weighting and output-weighting optimal control design techniqes. These control designs were evaluated using aircraft time simulations driven by Dryden spectra turbulence. Fixed gain controllers were tested throughout the aircrft operating envelope. The preliminary design of the hardware modifications necessary to implement and test the RQAS on a commuter aircraft is included. These include a separate surface elevator and the flap modifications to provide both direct lift and roll control. A preliminary failure mode investigation was made for the proposed configuration. The results indicate that vertical acceleration reductions of 45% and lateral reductions of more than 50% are possible. A fixed gain controller appears to be feasible with only minor response degradation.

Davis, D. J.↗

Bidirectional Three-phase Current Source Converter based Buck-boost AC/DC System using Bidirectional Switches

The 1.2 kV 4H-SiC BiDirectional Field Effect Transistor (BiDFET) is the first monolithic SiC bidirectional switch, which offers a lower voltage drop and semiconductor devices count alternative to the reverse-voltage-blocking (RB) switch used in the current-source converters (CSC). The bidirectional switch based CSC also allows DC-link current reversal for bidirectional power flow and provides multiple system-level benefits in a buck-boost AC/DC system consisting of buck-type DC/DC converter and CSC. This paper discusses the selection of buck converter duty cycle and CSC modulation index for the system’s buck-boost operation with a wide variation in DC voltage. CSC modulation schemes categorized based on the number of hard-turn-on transitions per switching cycle are also analyzed along with the three-step and four-step commutation schemes that are essential for the CSC commutation cells. Finally, the different schemes are evaluated and compared through the experimental results of a 10 kW, 480 VRMS, LL/ (400 − 800) V AC/DC system.

Bidirectional switches, four-quadrant switches, cu↗

Traveling-wave synchronous coil gun

An outline is presented of the coilgun concept, excitation, switching, brush commutation, power supply, and performance. It is shown that a traveling-wave synchronous coilgun permits independent adjustment of the magnetic field and armature current for high velocity at low armature mass fraction. Magnetic field energy is transferred from the rear of the wave to the front without passing through the power supply. Elaborate switching is required.

Elliott, David G.↗

Equitable Employment Access Assessed Through the Mobility Energy Productivity (MEP) Metric

This paper examines commuting options for an underserved neighborhood in Columbus, Ohio to a major employment center. The analysis is based on an emerging metric called the Mobility Energy Productivity (MEP) metric developed by the National Renewable Energy Laboratory (NREL) on behalf the Department of Energy (DOE). The purpose of the analysis is twofold. The first is to quantify relative attractiveness of commute modes between the two locations, using a perspective that includes travel time, energy and cost, while providing an equity lens to compare commute options between privately owned vehicles and pooled transportation options. The second objective is to apply MEP in a specific origin-destination (O-D) scenario, whereas previously it has been used primarily as an aggregate metropolitan-wide statistical measure. In so doing, parameters in MEP are further customized and the methodology is refined to account for unique aspects of this case study. Four commute options between the neighborhood and the industry employment based are analyzed: drive alone option, public transit express bus (historical), public transit normal route (current), and a proposed shuttle specific to the O-D pair. This analysis identified issues applying MEP that required further customization: (1) deprecation functions customized to modes other than driving, (2) accounting for first-mile last-mile travel times with transit, (3) accounting for transit frequency without resorting to full simulation. The results provide quantitative insights on the employment accessibility between these two locations, both across modes, and as equity of job accessibility for those who can and cannot operate a personal vehicle.

ADVANCED PROPULSION SYSTEMS↗

Direct current ballast circuit for metal halide lamp

A direct current ballast circuit for a two electrode metal halide lamp is described. Said direct current ballast circuit includes a low voltage DC input and a high frequency power amplifier and power transformer for developing a high voltage output. The output voltage is rectified by diodes and filtered by inductor and capacitor to provide a regulated DC output through commutating diodes to one terminal of the lamp at the output terminal. A feedback path from the output of the filter capacitor through the bias resistor to power the high frequency circuit which includes the power amplifier and the power transformer for sustaining circuit operations during low voltage transients on the input DC supply is described. A current sensor connected to the output of the lamp through terminal for stabilizing lamp current following breakdown of the lamp is described.

Lutus, P.↗

Concepts for reference frames in geodesy and geodynamics - The reference directions

The paper discusses a study that establishes a reference frame, moving with the earth (in some average sense), in which the geometric and dynamical behavior of the earth can be monitored, and whose motion with respect to inertial space can also be determined. Emphasis is placed on the fact that the reference directions at an observation point on the earth surface, are defined by fundamental vectors for both space and time. The interrelationships between this space- and time-variant angular parameter are illustrated in a commutative diagram and tower of triads. Although the model tower is also space- and time-variant, its variations are described by adopted parameters using our current knowledge of the earth.

Grafarend, E. W.↗

Design, characterization and control of the Unique Mobility Corporation robot

Space and mass are at a premium on any space mission, and thus any machinery designed for space use should be lightweight and compact, without sacrificing strength. It is for this reason that NASA/LeRC contracted Unique Mobility Corporation to exploit their novel actuator designs to build a robot that would advance the present state of technology with respect to these requirements. Custom-designed motors are the key feature of this robot. They are compact, high-performance dc brushless servo motors with a high pole count and low inductance, thus permitting high torque generation and rapid phase commutation. Using a custom-designed digital signal processor-based controller board, the pulse width modulation power amplifiers regulate the fast dynamics of the motor currents. In addition, the programmable digital signal processor (DSP) controller permits implementation of nonlinear compensation algorithms to account for motoring vs. regeneration, torque ripple, and back-EMF. As a result, the motors produce a high torque relative to their size and weight, and can do so with good torque regulation and acceptably high velocity saturation limits. This paper presents the Unique Mobility Corporation robot prototype: its actuators, its kinematic design, its control system, and its experimental characterization. Performance results, including saturation torques, saturation velocities and tracking accuracy tests are included.

Velasco, Virgilio B., Jr.↗

A Parallel Processing Algorithm for Remote Sensing Classification

A current thread in parallel computation is the use of cluster computers created by networking a few to thousands of commodity general-purpose workstation-level commuters using the Linux operating system. For example on the Medusa cluster at NASA/GSFC, this provides for super computing performance, 130 G(sub flops) (Linpack Benchmark) at moderate cost, $370K. However, to be useful for scientific computing in the area of Earth science, issues of ease of programming, access to existing scientific libraries, and portability of existing code need to be considered. In this paper, I address these issues in the context of tools for rendering earth science remote sensing data into useful products. In particular, I focus on a problem that can be decomposed into a set of independent tasks, which on a serial computer would be performed sequentially, but with a cluster computer can be performed in parallel, giving an obvious speedup. To make the ideas concrete, I consider the problem of classifying hyperspectral imagery where some ground truth is available to train the classifier. In particular I will use the Support Vector Machine (SVM) approach as applied to hyperspectral imagery. The approach will be to introduce notions about parallel computation and then to restrict the development to the SVM problem. Pseudocode (an outline of the computation) will be described and then details specific to the implementation will be given. Then timing results will be reported to show what speedups are possible using parallel computation. The paper will close with a discussion of the results.

Gualtieri, J. Anthony↗

Noncommutative complex Grosse-Wulkenhaar model

This paper stands for an application of the noncommutative (NC) Noether theorem, given in our previous work [AIP Proc 956(2007) 55-60], for the NC complex Grosse-Wulkenhaar model. It provides with an extension of a recent work [Physics Letters B 653(2007) 343-345]. The local conservation of energy-momentum tensors (EMTs) is recovered using improvement procedures based on Moyal algebraic techniques. Broken dilatation symmetry is discussed. NC gauge currents are also explicitly computed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗