Search NASA⌕ Search

SEARCH · Search NASA

Results for “cyclic voltammetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Direct extracellular electron transfer for high electricity production by a new type of marine microalgae Nannochloropsis sp. HDY2

A growing number of autotrophic microalgae have been found to have extracellular electron transfer (EET) capabilities. However, the mechanism and function of EET pathway in microalgae have not thoroughly investigated. This study presents evidence of direct extracellular electron transfer (DEET) for impressive electricity production by a new type of marine microalgae Nannochloropsis sp. HDY2 in the single and double-chamber photosynthetic microbial fuel cells (PFMCs). The electricity generation of Nannochloropsis sp. is strongly inhibited by photosynthetic inhibitors, suggesting that electrons involved in the extracellular electron transfer (EET) of Nannochloropsis sp. are derived from photosynthesis. The results of dialysis bag and supernatant experiments suggest that Nannochloropsis sp. produce electricity by DEET. The lack of typical redox peaks in cyclic voltammetry (CV) analysis and the appearance of extracellular filamentous component (EFC) around cells support this finding. Under high light conditions, the chlorophyll a and carotenoid content of Nannochloropsis sp. rapidly decreased while the fatty acid synthesis and electricity generation increased, suggesting that the DEET pathway play an active role in the resistance to photooxidation of Nannochloropsis sp. In conclusion, this study provides the first evidence that Nannochloropsis has the capability of performing EET and sheds new light on the positive role of DEET on the environmental adaptation of Nannochloropsis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Oxadiazole derivatives as stable anolytes for >3 V non-aqueous redox flow battery

Effective utilization of energy from renewable sources such as wind and solar requires the development of long duration energy storage (LDES) systems that can accommodate intermittent energy accrual. One option under investigation is the use of a redox flow battery (RFB). A significant amount of work has explored aqueous RFB systems with a variety of inorganic and organic carriers. However, moving to a nonaqueous solvent such as acetonitrile (MeCN) for RFB provides a much larger electrochemical window, which could lead to increased energy density if properly utilized. Here, in this work, we investigate a series of 2,5-diphenyl-1,3,4-oxadiazole (DiPhenOx) derivatives as anolytes for a redox flow battery. DiPhenOx has a low voltage redox event that, while reversible by cyclic voltammetry, was determined to be irreversible during bulk electrolysis. To improve cycling performance, we introduced various ester and cyano groups to the phenyl rings of DiPhenOx using molecular engineering. We characterized these derivatives spectroscopically and electrochemically to assess their feasibility for flow battery applications. The ester derivatives with the best cycling performance were tested in a flow cell vs. ferrocene, 2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene (DBBB) and thianthrene, which resulted in ~2 V, ~3 V and ~3 V redox flow batteries, respectively.

25 ENERGY STORAGE↗
DOE OSTI2023

An In Situ , multi-electrode electrochemical method to assess the open circuit potential corrosion of Cr in unpurified molten FLiNaK

An in situ electrochemical method to investigate the time-dependent spontaneous corrosion of pure Cr in an unpurified LiF-NaF-KF eutectic salt at 600 °C was developed. A multi-electrode electrochemical cell and a dual-electrode method were utilized to detect Cr(II) and Cr(III) ions on a platinum working electrode using cyclic voltammetry as a function of exposure time and compensating for the distance from the Cr electrode. XRD was performed to characterize the crystalline composition of the exposed FLiNaK and the salt films formed on the working electrodes. The fate of all electro-oxidized Cr must be accounted for to quantify corrosion rates. The concentrations of Cr(II) and Cr(III) species obtained were compared with the gravimetric mass change and ICP-OES analysis of the residual salt. Finally, outcomes, difficulties, and limitations are discussed.

ICP-OES↗
DOE OSTI2026

Nano zero valent iron electrodeposition at boron doped diamond electrodes

Here, in this study, we present an ecofriendly and simple electrochemical method for synthesizing nano zero-valent iron particles (nZVIs) directly on boron-doped diamond (BDD) electrode surfaces. A BDD electrode served as the substrate for electrodeposition using a 5 mM FeCl 3 /0.1 M KCl solution and chronoamperometry at an applied potential of −1.3 V versus Ag/AgCl (1 M KCl), as determined by cyclic voltammetry (CV) and supported by Pourbaix diagram analysis. The electrochemical behavior and surface modification were characterized using CV, electrochemical impedance spectroscopy (EIS), and surface analysis and microscopy techniques. The results confirm that BDD electrodes can serve as effective platforms for a controlled deposition of 56 nm nZVIs, offering a promising strategy for the development of advanced materials for environmental remediation, catalysis, and sensing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

An investigation on the impact of halidization on substituted dimethoxybenzenes

Functionalized organic molecules are emerging as charge storage materials in electrochemical technologies as the breadth and diversity of the organic design space offers the possibility of purpose-built materials with property sets optimized for a particular application. First developed as overcharge protection materials in lithium-ion batteries, substituted dialkoxybenzenes represent a potentially promising molecular platform for advancing soluble charge storage materials. In this study, we systematically substitute a series of halide groups at the 2- and 5-positions of the 1,4-dimethoxybenzene core, investigate the impact the halide groups have on molecular properties using electrochemical and spectroscopy methods, and compare these results to those of 2,5-dimethyl-1,4-dimethoxybenzene (25DDB), a previously reported derivative. In general, we observe that introduction of heavy halogen atoms leads to decreased gravimetric capacity as compared to 25DDB, but concomitantly improves solubility and redox potentials. As the halide functional group increases in size, the active material becomes less stable in its oxidized state as evinced by both cyclic voltammetry and bulk electrolysis cycling. None of the halogenated species are as stable as 25DDB indicating that these materials may be better suited for applications with more rapid cycling conditions (e.g., redox shuttling). More broadly, these results may serve as a useful data set for computational methods for materials discovery and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrolyte effects on the electrochemical performance of microemulsions

Here, we report a study of the electrochemistry of Ferrocene (Fc) in a Tween®20 (polyethylene glycol (20) sorbitan monolaurate) /1-butanol/ water/Toluene (TBWT) microemulsion system, focusing on the effects of electrolyte components. Resistance and conductivity measurements are used along with Cyclic Voltammetry (CV) to characterize the effects of supporting electrolyte, such as Bu 4 NBF 4 and KNO 3 , on the electrochemical performance and transport properties of Fc. With increasing Fc-containing oil phase concentration in the microemulsion, the observed peak current density fails to increase proportionately with the Fc concentration. Adding 0.05 m Bu 4 NBF 4 in the oil phase significantly increases the current density, presumably by lowering the resistance of microemulsion and promoting the accessibility of Fc in the system. Moreover, increasing the aqueous phase supporting electrolyte from 0.5 m KNO 3 to 1 m KNO 3 does not exhibit an analogous effect. We discuss these results in the context of our working hypothesis for microemulsion organization and its implications for electron transfer to Fc.

Conductivity↗
DOE OSTI2022

Carbon nanotubes decorated with Pt as a viable electrocatalyst system using electrochemical atomic layer deposition

Surface limited redox replacement (SLRR) is an electrochemical deposition method designed to deposit metal thin films, typically onto other metals, that are mere monolayers in thickness, where such low dimensions allows catalyst-support interactions to affect catalyst efficiency. Here we explore the growth of Pt, using iterative Cu-mediated SLRR cycles, directly onto carbon nanotubes (CNTs) which are potentially good candidates as electrocatalyst supports due to their electrical conductivity and chemical resistance. Here scanning electron microscope images showed that Pt grew as nanoparticles, and hydrogen underpotential deposition from cyclic voltammetry showed that the active surface area approached an asymptotic value around eight iterations. Catalytic activity, measured using the oxygen reduction reaction, reached a maximum at ten iterations. Both are shown to be influenced by the growth mode, but electrochemical modeling indicates that the trend in activity is also due to a change in activation energy, possibly due to changes in Pt electronic structure due to interactions with the CNTs. Durability cycling showed a greater than 85% retention of surface area for the first 10,000 cycles of accelerated stress testing but decayed steadily to about 50% after 30,000 cycles. This performance may be related to the phenomenon that limits surface area growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Selective pseudocapacitive immobilization of REE elements on carbon based electrodes

Current extraction technologies for rare earth elements at ambient conditions are reagent and energy intensive, giving rise to significant quantities of secondary waste streams. Exploration of the removal of common cations from aqueous streams has been undertaken with carbon materials and have shown promising results. However, those promising materials have not been explored extensively for rare earth element capture from aqueous process streams. In this study, a carbon electrode was investigated for the adsorption and immobilization of REE elements from aqueous solutions. Cyclic voltammetry studies of the carbon electrode displayed a pseudocapacitive behavior where it was verified that cation adsorption is accompanied by an electron transfer process. Preliminary tests showed that a current density of 89.1 mA. g -1 , allowed for the pseudocapacitive adsorption (PSA) of Nd 3+ cation without the formation of rare earth hydroxides. Hence, the selective PSA of Nd 3+ was verified in an electrolyte solution with equimolar concentrations of Nd 3+ , Mg 2+ , Li + , Na + and K + , achieving separation factors of 8.6, 1.1, and 10.9 for Nd 3+ /Li + , Nd 3+ /Na + , and Nd 3+ /Mg 2+ , respectively. Analysis of the potential-time curves for the various cations suggests that storage of ions in the electrode involved pore-spacings rather than interlayer spacings and was corroborated by XRD analysis. Specific capacitance as high as >640 F.g -1 for Nd 3+ was also observed for the carbon electrode, with Faradaic efficiencies (FE) of > 20% for Nd 3+ and Mg 2+ , and > 9% for Na + . Furthermore, adsorption capacity of >125 mg g -1 after 4hrs of electrosorption was observed for Nd 3+ . In the presence of the Nd 3+ electrolyte, the electrode achieved increasing storage of Nd 3+ with >94% retention of Nd 3+ with a FE > 20% over 6 cycles between loading and releases in 1 M KCl solution. In conclusion, these preliminary results provide information and some guidance on the selective recovery of rare earth elements, such as Nd, in aqueous streams in the presence of competitive cations employing the use of carbon-based materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

In-situ polarization modulation IRRAS investigation of ammonia electrooxidation on Pt-Ir and Pt-Ru nanoparticles prepared on engineered catalyst supports

The catalytic activity and surface reactivity of monometallic Pt and bimetallic Pt-Ir and Pt-Ru nanoparticles, supported on two distinct Engineered Catalyst Supports (ECSs), were investigated for the Ammonia Electrooxidation Reaction (AmER) in alkaline media. XRD measurements confirmed alloy formation between Pt-Ir and Pt-Ru nanoparticles, as indicated by the shift of the (111) reflection to higher 2θ values. Cyclic voltammetry, linear sweep voltammetry, and chronoamperometry experiments were conducted to assess the catalytic activity of the Pt, Pt-Ir, and Pt-Ru electrocatalysts. All bimetallic catalysts exhibited lower onset potentials compared to Pt. The differing Tafel slopes between Pt (74 mV dec⁻¹), Pt-Ir (152 mV dec⁻¹), and Pt-Ru (118–197 mV dec⁻¹) suggest that alloying Pt with Ir or Ru alters the reaction mechanisms. Furthermore, the bimetallic Pt-Ir and Pt-Ru catalysts demonstrated greater tolerance for concentrated ammonia solutions relative to Pt. In-situ Polarization Modulation Infrared Reflection Absorption Spectroscopy (PM-IRRAS) provided insights into the formation of N-H species, azide anions (N₃⁻), and N-O compounds. For the Pt-Ru catalyst, an additional peak around ~3600 cm⁻¹ was observed, corresponding to OH⁻ species. The PM-IRRAS results align with the Gerischer–Mauerer mechanism, indicating that partially dehydrogenated ammonia adsorbates act as active intermediates in the oxidation of ammonia over Pt-Ir and Pt-Ru catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical stability and corrosion behavior of Ni-Cr alloy in molten LiCl-KCl salt

This study investigated the electrochemical properties and potential-dependent stability of Cr(II) and Ni(II) in a eutectic LiCl-KCl molten salt at 500 °C under an argon atmosphere using a three-electrode cell configuration with a glassy carbon working electrode, Ag/Ag + reference electrode, and graphite counter electrode. Cyclic voltammetry was employed to characterize the Cr(0)/Cr(II)/Cr(III) and Ni(0)/Ni(II) redox transitions, yielding diffusion coefficients of 0.50 (±0.01) × 10 −5 cm 2 s −1 for Cr(II) and 0.91 (±0.16) × 10 −5 cm 2 s −1 for Ni(II) at 500 °C. The redox stability domains of these species provided insight into the corrosion mechanisms of a Ni-Cr alloy (80–20 wt %) in LiCl-KCl salt. The measured open circuit potential of the alloy corresponded to the range of potentials where the Ni(0) and Cr(II) species are stable, indicating a preferential dissolution of Cr. Immersion testing of the alloy for 336 h confirmed significant Cr depletion (or Ni-enrichment) at the surface layer, corroborating Cr dealloying as the dominant corrosion reaction under open circuit conditions. Additionally, the application of a small anodic overpotential (0.11 V) resulted in selective Cr dissolution while a large anodic overpotential (0.25 V) resulted in co-dissolution of both Cr and Ni. Furthermore, these results demonstrate that the corrosion mechanisms of a Ni-Cr alloy in LiCl-KCl depend upon the applied potential, and thus the redox conditions of the molten salt should be carefully controlled in the design of a redox buffer to mitigate corrosion in molten salt environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Preparation of a uranium monocarbide anode and electrochemical characterization in molten LiCl-KCl-UCl 3

Porous uranium carbide (UC) pellets possessing moderate electrical conductivity were synthesized by reaction of UO 2 with graphite at temperatures up to 1550°C under rough vacuum. Conversions as high as 98% were achieved at soak times of 2-4 hours. The electrochemistry of the UC pellets in molten LiCl-KCl-6.5 wt% UCl 3 was explored using a variety of techniques including DC polarization methods, cyclic voltammetry, chronopotentiometry and bulk electrolysis. Here, the electrode reaction for anodic dissolution was found to be kinetically controlled by dissociation of UC to a transition state complex that was hypothesized to consist of a uranium atom partially complexed by chloride ions. Precise measurements of current efficiencies using chronopotentiometry indicated upper limits of 90.9 ± 3.4% and 98.3 +1.7/-3.7% for anode and cathode, respectively, when operating at anodic overpotentials near +300 mV. Bulk electrolysis of a UC pellet performed by passing 98% of the theoretical charge resulted in nearly complete recovery of its uranium content as highly pure metal at the cathode.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reduction of uranyl and uranyl-organic complexes mediated by magnetite and ilmenite: A combined electrochemical AFM and DFT study

Reduction of mobile aqueous uranyl complexes can be hindered by the strength of the uranyl-ligand complex and the resistivity of the complexes to electron transfer. Semiconducting solids, such as magnetite (Fe 3 O 4 ) and ilmenite (FeTiO 3 ), can facilitate otherwise-slow electron transfer between the reductant and oxidant, especially if these species are adsorbed on their surfaces as inner-sphere complexes. Electrons can then be shuttled through the surface or the structure. This process can be facilitated by either finding a new electron transfer path or by weakening or destroying the ligand-uranyl complex. Using in situ electrochemical atomic force microscopy (EC-AFM), we imaged reduction products of uranyl as mediated by magnetite and ilmenite in the absence or presence of the organic ligands, ethylenediaminetetraacetate (EDTA) and oxalate. In situ images of uranyl reduction show gradual nucleation and growth of reduced uranium on the mineral surfaces with decreasing reduction potentials. X-ray photoelectron spectroscopy (XPS) measurements indicate pentavalent uranium as the dominant uranium species resulting from uranyl reduction mediated by magnetite and ilmenite. The reduction potentials of uranyl-organic species relevant to our reaction system, (U VI O 2 ∙oxalate) 0 and (U VI O 2 ∙HEDTA) - , are derived using quantum–mechanical modeling and compared with the midpoint potentials obtained from cyclic voltammetry measurements. The spectroscopic, electrochemical, and computational data suggest that the catalysis of Fe-bearing minerals facilitates the reduction of uranyl-organic complexes. U(VI)-oxalate complexes are redox-active and participate directly in the reduction mediated by magnetite. In the presence of EDTA, reduction of uranyl may proceed in concert with ligand exchange between metals (i.e., U and Fe) on the mineral surface. Finally, the proposed mechanism is the breaking of uranyl-organic bonds upon interaction with the mineral surface followed by the formation of Fe-organic bonds, thereby allowing the reduction of hexavalent uranyl to pentavalent one.

58 GEOSCIENCES↗
DOE OSTI2021

Hydroxide melt induced corrosion of Ni at elevated temperatures under steam electrolysis conditions

Molten alkali electrolyte based high temperature water electrolysis (HTWE) process offers an efficient pathway to integrate renewable energy resources for large scale and economic hydrogen production. Long term and stable operation of these systems require an in-depth understanding of materials stability under anodic and cathodic exposure conditions of the cell and cell stacks. In the present study, we report our findings on the corrosion of Ni in the presence and absence of (LieNa) hydroxide melt at 600 °C under oxidizing and reducing conditions representative of HTWE. While the Ni electrode was found to remain thermodynamically stable in metallic form under cathodic (reducing) exposure conditions, the corrosion rate in molten hydroxide under oxidizing conditions was found to be nonparabolic in nature. A cyclic voltammetry study provides the breakdown of the passive metal-oxide surface layer at the anodic overpotential region between 0.45 V and 2 V in molten hydroxide under oxidizing conditions. As a result, a thermochemical process for accelerated corrosion based on the oxide scale fluxing in hydroxide melt has been developed.

08 HYDROGEN↗
DOE OSTI2024

Trace Fe activates perovskite nickelate OER catalysts in alkaline media via redox-active surface Ni species formed during electrocatalysis

The accurate description of activity trends among perovskite-oxide oxygen-evolution-reaction (OER) catalysts using electronic-structure descriptors requires that the bulk structure of the catalyst is comparable to that of the surface. Few studies have addressed the dynamic nature of the catalyst's structure during the OER and the consequential implications for understanding activity. Here, we use a combination of electrochemical and materials-characterization techniques to study the surface reconstruction and the associated formation of a new redox-active phase on LaNiO 3 particles, LaNiO 3 epitaxial films, and an analogous Ruddlesden-Popper phase, La 2 NiO 4 . Small, but characteristic, redox features corresponding to Ni redox in nominally amorphous NiO x H y are observed during cyclic voltammetry of these initially fully crystalline materials. The size of these redox features grows with prolonged cycling and contributes to an increased surface area as determined from electrochemical impedance spectroscopy (EIS). Here we find the OER activity is strongly dependent on soluble Fe species in the electrolyte, common impurities in alkaline media. These observations are consistent with the reconstruction of the crystalline surface to form NiO x H y species and subsequent activation by adsorption of Fe forming the well-known and extremely active NiFeO x H y OER catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tracking the evolution of processes occurring in silicon anodes in lithium ion batteries by 3D visualization of relaxation times

An unconventional electroanalytical method has been used for tracking processes in silicon anodes in lithium ion batteries: a 3D visualization of relaxation times. Impedance data of the electrodes were collected at different potentials and different cycles during cyclic voltammetry, and were treated by means of the Distribution of Relaxation Times (DRT) method. A 3D visualization of the results allowed to identify the formation of a solid electrolyte interphase on the anode, composed of two layers with different relaxation times. Such findings are not possible by conventional analysis of impedance data by modeling with equivalent circuits, nor by simple DRT alone. Additionally, it was possible to observe that the characteristic relaxation time of the lithiation of the Si anode becomes smaller upon cycling, indicating that the material experiences structural transformations that allow it to lithiate faster. The result is relevant to motivate the use of micron-sized particles in the anode.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrochemical properties of Gd(III) ions in LiCl-KCl-GdCl 3 at 723–1023 K

Electrochemical behavior of Gd(III) ions in molten LiCl-KCl-GdCl 3 was investigated at 723–1023 K via cyclic voltammetry using tungsten as a working electrode, Gd-Bi (mole fraction, x Gd = 0.16) as a reference electrode, and Gd-Bi (x Gd = 0.02) as a counter electrode. A single reduction–oxidation wave was observed, confirming a single-step, 3-electron transfer Gd(III)/Gd transition. The cathodic peak potential exhibited minimal change (<13 mV) over a wide range of scan rates (0.05–0.30 V s –1 ), indicating facile charge transfer kinetics (i.e., a reversible electrode process). A nucleation overpotential associated with solid Gd deposition was observable at low temperatures (T < 823 K). The mass transport properties of Gd(III) ions were estimated using the Berzins and Delahay relation based on diffusion-limiting peak current. The diffusivity values were determined to be D Gd(III) = 0.5–2.7 × 10 –5 cm 2 s –1 at 723–1023 K with an associated activation energy of E a = 33.9 (±1.0) kJ mol –1 . Finally, the two-phase [liquid + GdBi] Gd-Bi alloy reference electrode experienced less than 0.5 mV of drift over 5 days of repeated electrochemical measurements, indicating high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Precious metal oxygen-evolving anodes for electrolytic reduction of metal oxides in molten LiCl-Li 2 O electrolyte

Understanding the electrochemical stability of oxygen-evolving anode materials in molten salt electrolytes is essential to enable decarbonized electrolytic reduction of metal oxides (e.g., used nuclear oxide fuels). Here, this work investigated three precious metals (Ir, Ru, and Pt) as oxygen-evolving anodes in molten LiCl-Li 2 O (99.0-1.0 wt%) at 650 °C. For consistent measurements, this work employed a three-electrode cell comprised of a two-phase Li-Bi (65-35 at%) reference electrode and a NiO counter electrode. Anodic polarization behavior of each anode was investigated via cyclic voltammetry (CV) and chronoamperometry. The onset potential for oxygen evolution was observed at E > 2.9 V (vs. Li/Li + ) for the Ir and Ru anodes and anodic current density was as high as 1.0 A cm -2 at 3.23 V. The dimensional stability of each anode was evaluated from long-term electrolysis experiments (10.0-32.1 h) at 3.23 V. Rapid consumption of the Pt anode was observed after the application of 26,453 C cm -2 with a reduction in diameter of about 15.8% due to the formation of a non-protective Li 2 PtO 3 compound. The formation of this compound was also observed during CV measurements as additional anodic waves at potentials more negative than that of oxygen evolution. In contrast, both the Ir and Ru anodes exhibited excellent dimensional stability with a reduction in diameter or thickness of less than 1.5% even after applying greater charge density of ~41,100 C cm -2 , demonstrating superior stability during oxygen evolution in the LiCl-Li 2 O electrolyte.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Electrochemical behavior and separation of iodide in molten LiF-NaF-KF melt

This work studied the electrochemical behavior of iodide in molten LiF-NaF-KF mixture and the separation of iodide from the molten salt at 973 K using a graphite working electrode. The cyclic voltammetry (CV) and chronoamperometry (CA) measurements indicated an anodic passivation layer was formed on the graphite electrode in this melt and the layer blocked the charge transfer across the electrolyte/electrode interface. However, the added I- ions could pass through the passivation layer and were oxidized at the graphite electrode. The characterization of the obtained products proved that iodide ions was efficiently oxidized to I2 gas during electrolysis. Furthermore, the graphite anode showed excellent stability without any obvious change in dimensions after electrolysis, which showed the high current efficiency of I2 evolution reaction. Thus, the graphite electrode was possible to be served as an excellent anode to separate other anions (such as Br) from molten fluoride salts.

36 MATERIALS SCIENCE↗