Search NASA⌕ Search

SEARCH · Search NASA

Results for “data ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

A Data-Driven Reduced Order Model of an Isolated Rotor

There are numerous conceptual design stage rotorcraft analysis tasks which demand a high-fidelity and low cost method for rotor load distribution predictions. Considering Urban Air Mobility (UAM) vehicles aim to operate in close proximity to buildings and with unique rotor configurations, there is a significant challenge in quickly and accurately modeling rotors operating in complex, turbulent flow fields. One potential path for deriving a high-fidelity, low cost rotor model is with data-driven surrogate modeling. In this study, an initial investigation is taken to apply a proper orthogonal decomposition (POD) based reduced order model (ROM) for the purpose of pressure distribution prediction. In this study, a POD ROM was derived to produce distributed pressure predictions on rotor blades subjected to topology change due to variation in twist and taper ratio. Rotor twist was varied between 0◦, 10◦, 20◦, and 30◦ while taper ratio was varied between 1.0, 0.9, 0.8, and 0.7. All rotors consisted of a single blade. The POD ROM was validated for three demonstration cases; a high thrust rotor in hover, a low thrust rotor in hover, and a rotor in forward flight with a flight speed of M = 0.1. Results showed highly accurate distributed load predictions could be achieved at minimal computational cost. Computational cost for hovering blade surface pressure modeling was reduced from 12 hours on 440 cores to 10−5 seconds on a single core. For blade in forward flight cost was reduced from 20 hours on 440 cores to 0.6 seconds on a single core. For cases of high thrust and low thrust rotors, POD ROM was used to undergo a design optimization of the rotor such that figure of merit was maximized. Total optimization time for each case was 1 minute.

Data-Driven↗
NASA NTRS1950

A wind-tunnel investigation of the effects of thrust-axis inclination on propeller first-order vibration

Data on the aerodynamic excitation of first-order vibration occurring in a representative three-blade propeller having its thrust axis inclined to the air stream at angles of 0 degrees, 4.55 degrees, and 9.8 degrees are included in this paper. For several representative conditions the aerodynamic excitation has been computed and compared with the measured values. Blade stresses also were measured to permit the evaluation of the blade stress resulting from a given blade aerodynamic excitation. It was concluded that the section aerodynamic exciting force of a pitched propeller may be computed accurately at low rotational speeds. As section velocities approach the speed of sound, the accuracy of computation of section aerodynamic exciting force is not always so satisfactory. First-order blade vibratory stresses were computed with satisfactory accuracy from untilted-propeller loading data. A stress prediction which assumes a linear relation between first-order vibratory stress and the product of pitch angle and dynamic pressure and which is based on stresses at low rotational speeds will be conservative when the outer portions of the blade are in the transonic and low supersonic speed range.

Gray, W H↗
DOE OSTI2026

Data mining the missing ordered phases of Li/Na metal oxides

Data-driven discovery of Li-ion and Na-ion battery materials has been pioneered by generic materials data platforms such as the Materials Project. After decades of progress, it is timely to ask whether there remain underexplored compositional spaces. Here, in this work, we present a systematic data-mining effort to uncover missing ordered binary, ternary and quaternary Li/Na-containing metal oxides using high-throughput density functional theory (DFT). Building on 19,120 stable and metastable oxides entries from the Materials Project, we performed 13,245 additional calculations through isovalent substitutions of known ground states, experimentally reported compounds, and specific prototype structures. Our study identifies 36 new ground states within the GGA/GGA + U convex hull and 45 within the r 2 SCAN convex hull. Additionally, we identified 840 metastable compounds from GGA/GGA + U and 979 from r 2 SCAN that are absent in the present Materials Project databases. Moreover, we have tripled the metastable materials in compositional spaces with a molar ratio of cation/anion >1, highlighting the overlooked opportunities in this compositional space.

25 ENERGY STORAGE↗
DOE OSTI2020

Multiscale modeling high-order methods and data-driven modeling

Projection-based reduced-order models (ROMs) comprise a promising set of data-driven approaches for accelerating the simulation of high-fidelity numerical simulations. Standard projection-based ROM approaches, however, suffer from several drawbacks when applied to the complex nonlinear dynamical systems commonly encountered in science and engineering. These limitations include a lack of stability, accuracy, and sharp a posteriori error estimators. This work addresses these limitations by leveraging multiscale modeling, least-squares principles, and machine learning to develop novel reduced-order modeling approaches, along with data-driven a posteriori error estimators, for dynamical systems. Theoretical and numerical results demonstrate that the two ROM approaches developed in this work - namely the windowed least-squares method and the Adjoint Petrov - Galerkin method - yield substantial improvements over state-of-the-art approaches. Additionally, numerical results demonstrate the capability of the a posteriori error models developed in this work.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1954

A Wind-Tunnel Investigation of the Effects of Thrust-Axis Inclination on Propeller First-Order Vibration

Data on the aerodynamic excitation of first-order vibration occurring in a representative three-blade propeller having its thrust axis inclined to the airstream at angles of 0 degree, 4.55 degrees, and 9.80 degrees are included in this report. For several representative conditions the aerodynamic excitation has been computed and compared with the measured values. Blade stresses also were measured to permit the evaluation of the blade stress resulting from a given blade aerodynamic excitation. It was concluded that the section aerodynamic exciting force of a pitched propeller may be computed accurately at low rotational speeds. As section velocities approach the speed of sound, the accuracy of computation of section aerodynamic exciting force is not always so satisfactory.

Gray, W H↗
DOE OSTI2021

A physics-informed data-driven low order model for the wind velocity deficit at the wake of isolated buildings

Detailed simulations of the Atmospheric boundary layer (ABL) provides information on wind velocity, direction and turbulence for optimizing the design of wind turbines and wind farms and their operations. Distributed wind turbines have been considered for use in urban or suburban areas for covering energy needs using a sustainable energy solution. Simulations of high Reynolds number turbulent ABL flows past obstacles can be used for the prediction of the velocity deficit and turbulence characteristics in the leeward side of building-like obstacles, allowing for the estimation of power losses and fatigue loads in wind turbines. However, fully three-dimensional simulations of high Reynolds number ABL flows using Large Eddy Simulation (LES) or Reynolds Average Navier-Stokes Simulations (RANS) continue to require large computational/ execution times. As a result, these 3D simulations may not be ideal tools for the rapid assessment of wind energy potential. In the present study, 3D numerical results from wall resolved RANS simulations were used for the development of a low order model that allows the rapid assessment of wind velocity and turbulence in the leeward side of an isolated building.

17 WIND ENERGY↗
NASA NTRS1982

The DE magnetometer preprocessor users guide

A users guide for the Dynamics Explorer magnetometer preprocessor computer program is provided. This program is written in Xerox Extended FORTRAN IV and is used to process telemetry data in order to provide data files for use in analysis programs. This preprocessor is designed to operate on the Sigma 9 and the IBM 4341.

Salter, L. M.↗
NASA NTRS1993

A browse facility for Earth science remote sensing data: Center director's discretionary fund final report

An image data visual browse facility is developed for a UNIX platform using the X Windows 11 system. It allows one to visually examine reduced resolution image data to determine which data are applicable for further research. Links with a relational data base manager then allow one to extract not only the full resolution image data, but any other ancillary data related to the case study. Various techniques are examined for compression of the image data in order to reduce data storage requirements and time necessary to transmit the data on the internet. Data used were from the WetNet project.

Meyer, P. J.↗
NASA NTRS1993

The Fe2(+)-Mg interdiffusion in orthopyroxene: Constraints from cation ordering and structural data and implications for cooling rates of meteorites

Orthopyroxene crystals in a number of meteorites exhibit compositional zoning of Fe and Mg, which provide important constraint on their cooling rates. However, attempts to model cooling rate of these crystals from Fe-Mg zoning profiles suffer from the lack of any measured or theoretically well constrained Fe-Mg interdiffusion data in OP(x) It has been assumed that Fe-Mg interdiffusion in OP(x) only slightly slower than that in olivine. The purpose of this paper is to (1) calculate the Fe-Mg fractionation, and (2) provide analytical formulation relating cooling rate to the length of the diffusion zone across the interface of the overgrowth of a mineral on itself with application to Mg diffusion profile across OP(x) growth on OP(x) in certain mesosiderites.

Ganguly, J.↗
NASA NTRS1999

Interactive Sectoring and Animation of Global Change Data

In order to analyze and share results of global change data sets, scientists require a venue in which to exchange their results. One appropriate medium for these collaborative efforts is the world wide web. Intuitive and efficient user interfaces, and background processes have been developed at the Global Hydrology and Climate Center to interactively view weather satellite, radar, global temperature anomaly, and model output data using the world wide web. These tools combine scripts, Java and C code which allows the user to easily interact with data, to create high resolution sector images, and sectored animation sequences. This paper examines the architecture and interfaces and how they are used for collaborative research.

Meyer, Paul J.↗
DOE OSTI2020

Data-driven variational multiscale reduced order models

We propose a new data-driven reduced order model (ROM) framework that centers around the hierarchical structure of the variational multiscale (VMS) methodology and utilizes data to increase the ROM accuracy at a modest computational cost. The VMS methodology is a natural fit for the hierarchical structure of the ROM basis: In the first step, we use the ROM projection to separate the scales into three categories: (i) resolved large scales, (ii) resolved small scales, and (iii) unresolved scales. In the second step, we explicitly identify the VMS–ROM closure terms, i.e., the terms representing the interactions among the three types of scales. In the third step, we use available data to model the VMS–ROM closure terms. Thus, instead of phenomenological models used in VMS for standard numerical discretizations (e.g., eddy viscosity models), we utilize available data to construct new structural VMS–ROM closure models. Specifically, we build ROM operators (vectors, matrices, and tensors) that are closest to the true ROM closure terms evaluated with the available data. We test the new data-driven VMS–ROM in the numerical simulation of four test cases: (i) the 1D Burgers equation with viscosity coefficient v = 10 -3 ; (ii) a 2D flow past a circular cylinder at Reynolds numbers, Re = 100, Re = 500, and Re= 1000; (iii) the quasi-geostrophic equations at Reynolds number Re = 450 and Rossby number Ro = 0.0036; and (iv) a 2D flow over a backward facing step at Reynolds number Re = 1000. The numerical results show that the data-driven VMS–ROM is significantly more accurate than standard ROMs.

42 ENGINEERING↗
NASA NTRS1999

Interactive Sectoring and Animation of Global Change Data

In order to analyze and share results of global change climate data sets, scientists require a venue in which to exchange their results. The perfect medium for these collaborative efforts is the world wide web. Intuitive and efficient user interfaces, and background processes were developed at the Global Hydrology and Climate Center to interactively view weather satellite, radar, global temperature anomaly, and model output data using the world wide web. These tools combine scripts, Java, and C code, which allows the end user to easily interact with data, to create high resolution sector images, and sectored animation sequences. This paper examines the architecture and interfaces which were designed at the Global Hydrology and Climate Center and how they are used for collaborative research.

Meyer, Paul J.↗
DOE OSTI2020

Anomaly Detection in Sequential Health Care Data using Higher-Order Network Representation

The ever-increasing use of information technology (IT) in health care presents new challenges to patient care. Information errors arising from the use of Health IT and their implications on care delivery and patient outcomes have been widely reported. Information errors can lead to changes in clinical decisions, care processes, and care outcomes, among others. An altered care process, for example, could interrupt the sequence of care, which could lead to changes in care decisions and/or changes in care outcomes. We define interruptions in the care process as anomalies in the care sequence. In this paper, we present a new approach based on the higher-order network (HON) representation to detect anomalies in sequential health care data using electronic health records. The results show that there are higher-order dependencies in health care data; and that the use of HON representation is more effective than the first-order network representation for detecting anomalies in sequential health care data.

Niu, Haoran↗