Search NASA⌕ Search

SEARCH · Search NASA

Results for “depression area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Measuring Gaps In O-Ring Seals

Technique enables measurement of leakage areas created by small obstructions in O-ring seals. With simple fixture, gaps measured directly. Compresses piece of O-ring by amount determined by spacers. Camera aimed through clear plastic top plate records depression made in O-ring by obstruction. Faster, easier, more accurate than conventional estimation.

Johnson, Scott E.↗

Precipitation Signatures Observed by EDOP, AMPR and MIR During TRMM-LBA

During the TRMM-LBA (Tropical Rainfall Measuring Mission - Large-Scale Biosphere-Atmosphere Experiment in Amazonia) field campaign of January - February 1999, EDOP (ER-2 Doppler Radar), AMPR (Advanced Microwave Precipitation Radiometer), and MIR (Millimeter-wave Imaging Radiometer) on board the NASA ER-2 aircraft made a number of flights over the same Amazon area for studies of precipitation signatures. It is generally perceived that AMPR, with measurements at the frequencies of 10.7, 19.35, 37.0, and 85 GHz, is not sensitive to precipitation over land; a possible exception is detection through electromagnetic wave scattering at 85 GHz by frozen hydrometeors aloft above the freezing level. Analysis of the combined data sets from these instruments shows that, in the Amazon highly forested areas where the surface emissivity is high and uniform, direct detection of rain by a radiometer at frequencies less than or equal to 37 GHz is possible. The detection of rain is reflected by a depression in brightness temperature, which amounts to as much as 20 K at 19.35 GHz. Measurements at higher frequencies by the MIR help delineate the regions of scattering signatures above the freezing level. Implications of the combined wideband measurements from AMPR and MIR will be discussed.

Wang, J. R.↗

Identified motor terminals in Drosophila larvae show distinct differences in morphology and physiology

In Drosophila, the type I motor terminals innervating the larval ventral longitudinal muscle fibers 6 and 7 have been the most popular preparation for combining synaptic studies with genetics. We have further characterized the normal morphological and physiological properties of these motor terminals and the influence of muscle size on terminal morphology. Using dye-injection and physiological techniques, we show that the two axons supplying these terminals have different innervation patterns: axon 1 innervates only muscle fibers 6 and 7, whereas axon 2 innervates all of the ventral longitudinal muscle fibers. This difference in innervation pattern allows the two axons to be reliably identified. The terminals formed by axons 1 and 2 on muscle fibers 6 and 7 have the same number of branches; however, axon 2 terminals are approximately 30% longer than axon 1 terminals, resulting in a corresponding greater number of boutons for axon 2. The axon 1 boutons are approximately 30% wider than the axon 2 boutons. The excitatory postsynaptic potential (EPSP) produced by axon 1 is generally smaller than that produced by axon 2, although the size distributions show considerable overlap. Consistent with vertebrate studies, there is a correlation between muscle fiber size and terminal size. For a single axon, terminal area and length, the number of terminal branches, and the number of boutons are all correlated with muscle fiber size, but bouton size is not. During prolonged repetitive stimulation, axon 2 motor terminals show synaptic depression, whereas axon 1 EPSPs facilitate. The response to repetitive stimulation appears to be similar at all motor terminals of an axon. Copyright 2000 John Wiley & Sons, Inc.

NASA Discipline Neuroscience↗

Earth resources research using the Shuttle Imaging Radar system

The Shuttle Imaging Radar (SIR) is an L-band synthetic radar that transmits and receives horizontally polarized microwave radiation. It was originally launched on the second Shuttle test flight (STS-2) in November 1981 with the antenna depression angle fixed at 43 deg. In this configuration, the radar system was referred to as SIR-A, and it collected more than then a million square kilometers of Earth imagery in a variety of areas situated between 38 deg north and south latitude. SIR-A data was optically recorded onboard the Shuttle, and it was subsequently correlated on the ground to produce imagery with a 50 kilometer swath width and a surface resolution of approximately 40 meters. The SIR is presently being upgraded into a new configuration termed SIR-B, in which the radar's antenna can be mechanically rotated in the Shuttle's payload bay during an orbital mission. SIR-B is currently scheduled for flight on the seventeenth Shuttle mission (STS-17) that is tentatively planned for August 1984. In its new configuration, the SIR-B can be used to image selected regions at different angles of incidence ranging from 15 deg to 60 deg (as measured from the local vertical). In principle, multiple incidence angle radar imagery of selected areas can be coregistered and used to differentiate surficial materials on the basis of their roughness characteristics. This procedure is conceptually similar to the use of multispectral imagery acquired at shorter wavelengths to discriminate surficial materials on the basis of their pigmentation.

Monson, R.↗

Potential Mars Surveyor 2001 Landing Sites: Low-Elevation Cratered "Highlands" in Central and Eastern Sinus Meridiani and Near Amenthes Fossae

The main scientific goal for the Mars Surveyor Program 2001 (MSP 01) landed mission is to collect and characterize 91 rock and 13 soil core samples using an integrated instrument suite onboard the Athena Rover. If possible, these samples will be retrieved and returned to Earth via a MSP 05 or MSP 07 mission. Preliminary engineering constraints for the MSP 01 landing site call for a location that lies between 15 S and 30 N, and below about 2 km elevation (based on Viking-era topography). Desirable landing sites for MSP 01 are to be located "in the ancient highlands where the environmental conditions may have been favorable to the preservation of evidence of possible prebiotic or biotic processes including the emergence (and, potentially, the persistence) of life". We interpret this to mean that the desirable sites include those that have evidence of aqueous sediments that might have been deposited during the Noachian and/or Hesperian Epochs of Mars' history. In addition to the search for subaqueous sedimentary deposits, we took into consideration the fact that the rover, Athena, will need to be able to access these materials. Thus, a site where aeolian deflation has occurred might be desirable because it might expose, in situ, layered sedimentary deposits. Deflated areas, of course, might include potential landing hazards in the form of meterscale buttes and mesas (e.g., Christmas Lake Valley, OR), thus careful study of such sites with high resolution images will be required before a decision is made to land. We have been examining three regions that have potential to be considered for MSP 01 landing sites. This work is based on Viking (VIS, IRTM) and Phobos 2 (Termoskan) observations and should be regarded as preliminary because we believe that the final site selection should also be based upon analysis of Mars Global Surveyor observations that help constrain mineralogy (TES) and local geomorphology (MOC, MOLA). (1) Eastern Sinus Meridiani Region (proposed by K. S. Edgett) Sinus Meridiani is a persistent low-albedo (< 0. 16) region on the martian equator that has been recognized for about 400 years. All of Sinus Meridiani is below the 2 km elevation constraint for MSP 01. The region includes cratered highlands, valley networks, aeolian dunes, and possible aqueous sedimentary deposits. The landing site study region is located in the eastern portion of Sinus Meridiani. It is bounded by latitudes 10 S to 2 N, longitudes 355 W to 345 W, and the elevations are mostly 1-2 km. The center of this area contains a medium-albedo (0.19-0.21), relatively smooth-surfaced deposit that was suggested by Rice to be a lacustrine deposit. Several potential landing areas can be suggested within this region. Based on Viking and Phobos 2 data, the favored sites so far are centered at 7.6 S, 346.9 W and 0.8 S, 349 W. Thermal inertias are 3.2-7.0 x 10(exp -3) cal /sq cm s(exp -0.5)/K; and rock abundances are around 2-6%. The site at 7.6 S, 346.9 W is at the southern end of the smooth, medium-albedo unit that might have a lacustrine origin. At this location, numerous channels appear to have drained toward the smooth unit. Viking images from orbit 747A show this area at about 15 m/pixel ground resolution. The images reveal that aeolian deflation has occurred along the deposit's margins. Bright (i.e., albedo >= 0.21) aeolian dunes are present on the channel floors and in some of the depressions on the smooth unit. The bright, apparently active dunes might consist of material (perhaps lakedeposited sands) that has been eroded from the smooth unit. The site at approximately 0.8 S, 349 W is selected because it offers an opportunity to solve a long-standing puzzle about Mars remote sensing. There are three main "color" units on Mars: "dark red, dark gray, and bright red". This landing site would allow the Athena rover an opportunity to investigate all three materials within close proximity (the best place on Mars to do so). There are no high resolution (better than 100 m/pixel) Viking or Mariner images of this site. (2) Central Sinus Meridiani Region (proposed by K. S. Edgett and T. J. Parker) Central Sinus Meridiani is characterized by two types of surfaces [4]. One is like typical martian cratered highlands elsewhere- there are old valley networks and old impact craters. The other is relatively smooth and flat. These two units are in contact around 3.1 S between 5 W and 4 E longitudes. Valley networks- including one at 6'S, 358 W that rivals the Grand Canyon of Arizona- once drained toward the smooth unit. Edgett and Parker [4] proposed that the smooth unit might consist of sediments laid down in a large Noachian-aged sea/ocean that would have covered much of the northern hemisphere. Schultz and Lutz [I I I suggested that it is a paleopolar layered deposit. Regardless, the smooth unit where it contacts the cratered terrain would make an excellent site for Athena rover to investigate. The site is best seen in Viking high resolution images from orbits 408B (about 30 m/pixel) and 746A (about 12 m/pixel). These images suggest that aeolian deflation has occurred along the margin of the smooth unit, and this deflation has exposed horizontal larrs of material. The elevation is about 0.5 km; thermal inertias are 6.5-8.0 x 10(exp -3) cal /sq cm s(exp -0.5) / K; rock abundances are 2-4%; and the surface is probably sandy with dark drifts and ripples but almost no actual dunes. We suggest a landing around 3.2 S, 3.0 W would test the aqueous sediment hypothesis and provide a potentially smooth surface on which to land. (3) Amenthes Fossae Region (proposed by S. N. Huntwork and K. S. Edgett) The Amenthes Fossae are a series of graben/fissures that are circumferential to the southeast side of Isidis Planitia. These fissures cross a variety of ancient, heavily cratered Noachian terrain and younger, Hesperian and Amazonian terrain. We focused our search on a region 0-15 N, 250 - 270 W. Elevations are -0.5 to 2 km. Depending upon whether Isidis Planitia was ever a water-rich environment, this region might have been influenced by aqueous sedimentation. Valley networks are common, and they drained toward the north and northwest. We focused our work on a set of Viking orbiter high-resolution images, 719A 1-48. These have resolutions 16-24 rri/pixel. We examined images 20-23, centered at 2 N, 258 W. This site, on the plains just southwest of a 42 km-diameter crater, includes a valley network channel, a relatively young crater ejecta deposit, a few buttes composed of presumably ancient, Noachian bedrock, and a "plains" unit. The plains might make an ideal landing surface, except for the presence of some fine-scale ridges (oriented approximately N-S). The ridges are probably yardangs, thus this site offers a place where aeolian deflation has probably exposed some of the layered rock units that comprise the "plains". Thermal inertias are 7.9-8.3 x 10(exp -3) cal/sq cm s(exp -0.5) /K and rock abundances are 10-15%. A rover traverse might include the opportunity to go down to the floor (and sample along the walls) of the valley network channel at 2 N 258.1 W.

Edgett, K. S.↗

Up-date of traveling wave tube improvements

NASA research in the area of traveling wave tube technology is reviewed, with emphasis on the basic physics of guns and collectors and a computer model for the interaction between the electron beam and the RF circuit. The design of a multistage depressed collector, capable of multiplying tube efficiency by a factor of two or more, is presented; one such design has been adopted for commercial traveling wave tube production. A three-dimensional model of electron trajectories toward the collector also receives attention, as does the problem of RF circuit losses.

Buck, E.↗

Geology of Southern Guinevere Planitia, Venus, based on analyses of Goldstone radar data

The ensemble of 41 backscatter images of Venus acquired by the S Band (12.6 cm) Goldstone radar system covers approx. 35 million km and includes the equatorial portion of Guinevere Planitia, Navka Planitia, Heng-O Chasma, and Tinatin Planitia, and parts of Devana Chasma and Phoebe Regio. The images and associated altimetry data combine relatively high spatial resolution (1 to 10 km) with small incidence angles (less than 10 deg) for regions not covered by either Venera Orbiter or Arecibo radar data. Systematic analyses of the Goldstone data show that: (1) Volcanic plains dominate, including groups of small volcanic constructs, radar bright flows on a NW-SE arm of Phoebe Regio and on Ushas Mons and circular volcano-tectonic depressions; (2) Some of the regions imaged by Goldstone have high radar cross sections, including the flows on Ushas Mons and the NW-SE arm of Phoebe Regio, and several other unnamed hills, ridged terrains, and plains areas; (3) A 1000 km diameter multiringed structure is observed and appears to have a morphology not observed in Venera data (The northern section corresponds to Heng-O Chasma); (4) A 150 km wide, 2 km deep, 1400 km long rift valley with upturned flanks is located on the western flank of Phoebe Regio and extends into Devana Chasma; (5) A number of structures can be discerned in the Goldstone data, mainly trending NW-SE and NE-SW, directions similar to those discerned in Pioneer-Venus topography throughout the equatorial region; and (6) The abundance of circular and impact features is similar to the plains global average defined from Venera and Arecibo data, implying that the terrain imaged by Goldstone has typical crater retention ages, measured in hundreds of millions of years. The rate of resurfacing is less than or equal to 4 km/Ga.

Arvidson, R. E.↗

Geologic Mapping of the Aristarchus Plateau Region on the Moon

Aristarchus plateau (~25 N, 40 W) is a volcanologically diverse region containing sinuous rilles, volcanic depressions, mare material of various ages - including a candidate for the youngest mare unit on the lunar surface - pyroclastic deposits, and material of possible highland origin [1-5]. Here, we present preliminary mapping of a 13deg x 10deg area around Aristarchus plateau [6]. Interpretations of the region s volcanic evolution have implications for the global history of lunar volcanism, the crustal and mantle development of the Moon, and may ultimately help support successful lunar exploration [7].

Lough, T. A.↗

Close-up view of 20 March 1976 tornadoes - Sinking cloud tops to suction vortices

The article describes an airborne mission using a Learjet to secure direct data on a family of tornadoes spawned by a rotating thunderstorm in the Missouri-Illinois-Indiana area in March 1976 following an unusually warm February. Weakening of the tornado following increased cloud-scale vertical motion, predicted by a model constructed by Fujita (1972), was confirmed. The aircraft inspected overshooting cloud tops, examined subsidence (holes and depressions) in anvil tops it overflew, and surveyed footprints left by the tornadoes and tornado-blown litter on the ground traversed by the disturbances. Subsidence of cloud tops in advance of violent tornadoes below was confirmed. Isolated and multiple suction vortices left their characteristic ground marks; three scales of motion: tornado cyclone, tornado, and suction vortex, are evidenced by the ground truth.

Fujita, T. T.↗

Geology of the Gusec cratered plains from the Spirit rover transverse

The cratered plains of Gusev traversed by Spirit are generally low-relief rocky plains dominated by impact and eolian processes. Ubiquitous shallow, soil-filled, circular depressions, called hollows, are modified impact craters. Rocks are dark, fine-grained basalts, and the upper 10 m of the cratered plains appears to be an impact-generated regolith developed over intact basalt flows. Systematic field observations across the cratered plains identified vesicular clasts and rare scoria similar to original lava flow tops, consistent with an upper inflated surface of lava flows with adjacent collapse depressions. Crater and hollow morphometry are consistent with most being secondaries. The size frequency distribution of rocks >0.1 m diameter generally follows exponential functions similar to other landing sites for total rock abundances of 5-35%. Systematic clast counts show that areas with higher rock abundance and more large rocks have higher thermal inertia. Plains with lower thermal inertia have fewer rocks and substantially more pebbles that are well sorted and evenly spaced, similar to a desert pavement or lag. Eolian bed forms (ripples and wind tails) have coarse surface lags, and many are dust covered and thus likely inactive. Deflation of the surface _5-25 cm likely exposed two-toned rocks and elevated ventifacts and transported fines into craters creating the hollows. This observed redistribution yields extremely slow average erosion rates of _0.03 nm/yr and argues for very little long-term net change of the surface and a dry and desiccating environment similar to today's since the Hesperian (or _3 Ga).

Spirit↗

An investigation of MAGSAT and complementary data emphasizing precambrian shields and adjacent areas of West Africa and South America

Several possible causes for the east-west striping of the MAGSAT anomaly maps are listed and discussed including: (1) the inadequacy of the field model used for core-crustal separation of geomagnetic anomalies; (2) external field noise remaining in the available maps; (3) east-west trends of crustal uplift and depression; (4) east-west trends to convection patterns in the mantle; (5) bands of crustal materials of similar metamorphic grade; (6) variations in the depth of the Curie isotherm; and (7) the data processing techniques used to overcome the absence of tie lines and orbital path of MAGSAT.

Hastings, D. A.↗

Orange material in the Sulpicius Gallus formation at the southwestern edge of Mare Serenitatis

Orange and red materials were observed and photographed in the dark mantle of the Sulpicius Gallus Formation on the southwestern rim of the Serenitatis basin. These materials occur only within the dark mantle that overlies old rilled mare and highland units and are absent on the younger mare unit in this area. Orange and red materials occur predominantly as halos, patches, or rays around fresh impact craters ranging in diameter from less than 50 to 250 m and in layers exposed at the base of the dark mantle deposit in the steep walls of a depression and a graben. Red material is present in the highland subsurface, possibly as dikes. We conclude that orange material, locally underlain by red material, occurs in the dark mantle to a depth of about 50 m as locally stratified but discontinuous pyroclastic deposits and that it may have been produced by multiple 'fire foundation' eruptions during the later stages of accumulation of the older mare basalt units.

Lucchitta, B. K.↗

An investigation of MAGSAT and complementary data emphasizing precambrian shields and adjacent areas of West Africa and South America

The problems associated with the use of an interactive magnetic modeling program are reported and a publication summarizing the MAGSAT anomaly results for Africa and the possible tectonic associations of these anomalies is provided. An overview of the MAGSAT scalar anomaly map for Africa suggested a correlation of MAGSAT anomalies with major crustal blocks of uplift or depression and different degrees of regional metamorphism. The strongest MAGSAT anomalies in Africa are closely correlated spatially with major tectonic features. Results indicate that the Bangui anomaly may be caused by a central old Precambrian shield, flanked to the north and south by two relatively young sedimentary basins.

Hastings, D. A.↗

Nature and origin of layered deposits of the Martian polar regions

Layered deposits in the Martian polar regions are interpreted as accumulations of dust derived from atmospheric suspensions. Depressed and eroded terrains of the equatorial region are considered to be the principal sources of dust. A depositional model based on polar precipitation of dust predicts the formation of a vast, dome-shaped, featureless plateau underlain by layered deposits and occupying most of the area of annual frost cover. The rates of accumulation of dust and water ice in the polar regions have been estimated on the basis of atmospheric conditions in the present era. The analysis indicates an accumulation time of about 500 x 1 million years for the layered deposits and the presence of significant quantities of water ice in the deposits beneath the perennial cap.

Cutts, J. A.↗

Search for Martian fossil communities: Science strategies, sediment sites, and sample handling

The strategy for locating and sampling possible fossilized Martian organisms benefits from our experience with fossil microbial ecosystems on Earth. Evidence of early life is typically preserved as stromatolites in carbonates and cherts, and as microfossils in cherts, carbonates and shales. Stromatolites, which are laminated flat or domal structures built by microbial communities, are very likely the oldest and most widespread relics of early life. These communities flourished in supratidal to subtidal coastal benthic environments, wherever sunlight was available and where incoming sediments were insufficient to bury the communities before they became established. A logical site for such communities on Mars might be those areas in an ancient lake bed which were furthest from sediment input, but were still sufficiently shallow to have received sunlight. Therefore, although some sites within Valles Marineris might have contained ponded water, the possibly abundant sediment inputs might have overwhelmed stromatolite-like communities. Localized depressions which acted as catchment basins for ancient branched valley systems might be superior sites. Perhaps such depressions received drainage which, because of the relatively modest water discharges implied for these streams, was relatively low in transported sediment. Multiple streams converging on a single basin might have been able to maintain a shallow water environment for extended periods of time.

Desmarais, David J.↗

Geographic Distribution of QCDs Around the Northern Plains Basins of Mars and the Relationship to Lowland Materials

It has been suggested that quasicircular depressions (QCDs) without a structural representation in Viking and MOC visible imagery represent buried impact craters [1,2,3,4]. Topographic depressions will form over impact craters buried by a differentially compacting cover material because total cover thickness, and thus total compaction, is greater over the center of completely buried impact craters than their rims [5]. If this is the process by which QCDs form, then only areas of differentially compacting materials should have QCDs. Previous work has established that there is a relationship of surface relief to diameter for QCDs around the Utopia Basin [6]. The slope of the trend of this relationship varies depending on cover thickness, becoming steeper with decreasing thickness [7]. Comparing trendslopes of QCDs around different lowland basins might give us insight into the relative thickness of the cover material in these areas. We explore the geographic distribution of QCDs around the Utopia, Isidis and Acidalia basins and compare their location to geologic units and materials. We also compare evidence for relative thickness of cover material at the three basins.

Buczkowski, D. L.↗

SOFIA/HAWC+ Far-Infrared Polarimetric Large Area CMZ Exploration Survey II: Detection of a Magnetized Dust Ring in the Galactic Center

We present the detection of a magnetized dust ring (M0.8–0.2)in the central molecular zone (CMZ) of the Galactic center. The results presented in this paper utilize the first data release of the Far-Infrared Polarimetric Large Area CMZE mission (FIREPLACE) survey (i.e., Paper I of this series). The FIREPLACE survey is a 214μm polarimetric survey of the Galactic center using the SOFIA/HAWC+ telescope. The M0.8–0.2 ring is a region of gas and dust that has a circular morphology with a central depression. The dust polarization in the M0.8–0.2 ring implies a curved magnetic field that traces the ring-like structure of the cloud. We posit an interpretation in which an expanding shell compresses and concentrates the ambient gas and magnetic field. We argue that this compression results in strengthening of the magnetic field, as we infer from the observations toward the interior of the ring.

Dust continuum emmision↗

ERTS: A multispectral image analysis contribution for the geomorphological evaluation of southern Maracaibo Lake Basin

Multispectral analysis of ERTS-A images at scales of 1:1,000,000 and 1:500,000 has been conducted with conventional photointerpretation methods. Specific methods have been developed for the geomorphological analysis of southern Maracaibo Lake Basin which comprises part of the Venezuelan Andean Range, Perija Range, the Tachira gap and the Southern part of the Maracaibo Lake depression. A steplike analysis was conducted to separate macroforms, landscapes and relief units as well as drainage patterns and tectonic features, which permitted the delineation of tectonic provinces, stratigraphic units, geomorphologic units and geomorphologic positions. The geomorphologic synthesis obtained compares favorably with conventional analysis made on this area for accuracy of 1:100,000 scale, and in some features with details obtained through conventional analysis for accuracy of 1:15,000 and field work. Geomorphological units in the mountains were identified according to changes in tone, texture, forms orientation of interfluves and tectonic characteristics which control interfluvial disimetrics.

Salas, F.↗