Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

ToF-SIMS depth profiling of altered glass

Glass and mineral corrosion usually leads to the formation of morphologically and compositionally complex surface layers that can be characterized by various analytical techniques to infer rate control mechanisms. In this study, we investigate the capabilities and limitations of time-of-flight secondary ion mass spectrometry (ToF-SIMS) to better understand chemical processes of glass corrosion. In particular, we focus on the potential impact of the ToF-SIMS ion beam on the distribution of several elements of interest in alteration layers formed on International Simple Glass, a six-oxide reference glass altered in a solution enriched in alkalis and spiked with H 2 18 O. A thin flake of glass partially altered on both sides is analyzed entirely from one side to the other to determine whether atoms weakly bonded to the solid are displaced by the beams. We highlight the beam effect on cations weakly bonded to the silicate network (Li, Na, K, and B, Ca, Cs to a lesser extent) affecting the profile shape of these elements. No impact is observed on 18 O and H, but it is demonstrated that quantification of isotopic ratios is possible only for a limited range of isotopic enrichment.

36 MATERIALS SCIENCE↗

Tailoring UV cure depth profiles for optimal mechanical properties of organosilicate thin films

The adhesive and cohesive properties of organosilicate thin films are remarkably insensitive to UV curing. We demonstrate how to maximize these properties with UV standing waves together with an optical spacer underlying layer. Using a simulation of the UV cure profile through the film thickness, we demonstrate how a UV transparent SiN optical spacer layer can be selected to maximize curing at both sides of the organosilicate film with marked increases in interfacial fracture energy. On the contrary, a UV absorbing SiCN underlying layer resulted in significantly reduced UV intensities and small improvements of the interfacial fracture energies.

36 MATERIALS SCIENCE↗

Thermal conductivity depth-profile reconstruction of multilayered cylindrical solids using the thermal-wave Green function method

In this paper, a theoretical model for characterizing solid multi-layered cylindrical samples illuminated by a modulated uniform incident beam is developed by means of the Green function method. The specific Green function for the multi-layered cylindrical structure is derived and an analytical expression for the thermal-wave field in such a cylindrical sample is presented. The thermal-wave field of an inhomogeneous cylindrical sample irradiated with incident light of arbitrary angular and/or radial intensity distribution was obtained using this theoretical model. Furthermore, experimental validation is also presented in the form of experimental results with steel cylinders of various diameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Mg concentration on energy-band-depth profile of Mg-doped InN epilayers analyzed by hard X-ray photoelectron spectroscopy

The electronic structures of Mg-doped InN (Mg-InN) epilayers with the Mg concentration, [Mg], ranging from 1 × 10{sup 19} to 5 × 10{sup 19} cm{sup −3} were systematically investigated by soft and hard X-ray photoelectron spectroscopies. The angle-resolved results on the core-level and valence band photoelectron spectra as a function of [Mg] revealed that the energy band of Mg-InN showed downward bending due to the n{sup +} surface electron accumulation and p type layers formed in the bulk. With an increase in [Mg], the energy-band changed from monotonic to two-step n{sup +}p homojunction structures. The oxygen concentration rapidly increased at the middle-bulk region (∼4.5 to ∼7.5 nm) from the surface, which was one of the reasons of the transformation of two-step energy band.

36 MATERIALS SCIENCE↗

Resonance strength in {sup 22}Ne(p,gamma){sup 23}Na from depth profiling in aluminum

A novel method for extracting absolute resonance strengths has been investigated. By implanting {sup 22}Ne ions into a thick aluminum backing and simultaneously measuring the {sup 22}Ne+p and {sup 27}Al+p reactions, the strength of the E{sub r}{sup lab}=479 keV resonance in {sup 22}Ne(p,gamma){sup 23}Na was determined to be omegagamma=0.524(51) eV. This result has significantly reduced uncertainties compared to earlier work. Our results are important for the absolute normalizations of resonance strengths in the {sup 22}Ne(p,gamma){sup 23}Na hydrogen-burning reaction and in the {sup 22}Ne+alpha s-process neutron-source reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Compositional depth profiling of TaCN thin films

The composition profiling of thin TaCN films was studied. For the composition profile determination using x-ray photoemission spectrometry (XPS) in combination with Ar sputtering, preferential sputtering effects of N with respect to Ta and C were found to lead to inaccurate elemental concentrations. Sputter yield calculations for the given experimental conditions allowed for the correction of a part of the error, leading to fair accuracy by reference-free measurements. Further improvement of the accuracy was demonstrated by the calibration of the XPS compositions against elastic recoil detection analysis (ERDA) results. For Auger electron spectrometry (AES) in combination with Ar sputtering, accurate results required the calibration against ERDA. Both XPS and AES allowed for a reliable and accurate determination of the compositional profiles of TaCN-based thin films after calibration. Time-of-flight secondary-ion mass spectrometry was also used to assess the composition of the TaCN films. However, the analysis was hampered by large matrix effects due to small unintentional oxygen contents in the films. Energy-dispersive x-ray spectrometry is also discussed, and it is shown that an accurate reference-free measurement of the average film concentration can be achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Luminescence Properties of GaInAsP Layers with Graded Composition–Depth Profiles Grown on InP Substrates

Luminescence properties of epilayers of Ga{sub 1 –x}In{sub x}As{sub y}P{sub 1 –y} (GaInAsP) solid solutions with graded content of Group V elements (Δy up to 0.08 over a total thickness of about 1 μm) were studied at 77 and 300 K. The photoluminescence (PL) spectra of GaInAsP epilayers with large Δy values were broadened. The GaInAsP epilayers of low crystalline perfection exhibited either no PL emission or showed PL spectra characteristic of transitions involving impurity energy levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reaction of sulfur dioxide with modified 440C, studied by Auger electron spectroscopy and depth profiling

Auger electron spectroscopy and sputtering were used to study the interaction of SO2 with modified 440C, which is a nominally 77-wt%-Fe, 14-wt%-Cr, and 4-wt%-Mo bearing steel with C, S, Si, Ni, V, P, and Mn making up the balance. The sample was polycrystalline. Three temperatures were used: room temperature, 500 C, and 600 C. The reaction time was varied from 30 minutes to 2 hours. A surface cleaned of oxides was the starting point for each reaction. For reactions at 500 C, the major constituents Cr, O, Fe, and S were present in the surface film. At 600 C, the principal constituents of the film were Cr, O, and S with no Fe present. Therefore, a transition in film composition occurred between 500 and 600 C. Oxides were the primary constituents of the films at both temperatures. Room-temperature reactions indicated that SO2 adsorbed dissociatively, with approximately equal quantities of S and O on the surface. For the same reaction time (1 hr) and pressure, a strong temperature dependence of film thickness was observed. The film formed at 600 C was approximately seven times thicker than that formed at 500 C.

Ferrante, J.↗

Depth profiles of Mn-53 in lunar rocks and soils

Results of measurements of cosmic-ray-produced Mn-53 taken down the length of the Apollo 16 deep drill core are presented. They indicate that the lunar regolith has been unmixed, on a meter scale, for the past 5 million years at the location of this core. The data are in agreement with earlier Mn-53 measurements on the Apollo 15 drill core. Mn-53 activity profiles in 14310, 12002, and 14321 are compared to each other; all three rocks have probably been on the lunar surface long enough to saturate their solar cosmic-ray-produced Mn-53 (half-life = 3.7 m.y.) activity.

Imamura, M.↗

Depositional history of core section 74001 - Depth profiles of maturity, FeO, and metal

Samples from every 0.5-cm interval of soil in core section 74001 have been studied by ferromagnetic resonance (FMR) and magnetic techniques. The values of the FMR maturity index show that the 74001 samples are very immature (the index ranges from 0.14 to 0.29 units) and have not seen appreciable, if any, surface exposure since their deposition. In fact, the small amount of fine-grained metal in the 74001 samples is probably not acquired as a result of their exposure to the micrometeoroid flux at the lunar surface. Thus, the black-glass soil of 74001 was deposited very rapidly, probably in a single episode or several closely spaced episodes of lunar fire fountaining. The average concentration of FeO and its standard deviation for all the 74001 samples are 22.5 + or - 0.3 wt.%. Since the FeO concentration is so uniform, no large variations in the major-element chemistry of 74001 are expected, with the possible exception of the volatile elements. The concentration of coarse-grained metal, which is measured magnetically, and its standard deviation are 0.15 + or - 0.01 wt.%. The coarse-grained metal probably precipitated contemporaneously with the silicate and oxide phases in the black-glass droplets.

Morris, R. V.↗

Be-10 and Cl-36 depth profiles in an Apollo 15 drill core

The present study of galactic cosmic ray production profiles by means of tandem accelerator mass spectrometry has measured cosmic ray-produced Be-10 and Cl-36, whose half-attenuation lengths are respectively calculated to be 120 and 132 g/sq cm. The measured half-attenuation lengths for Be-10 are noted to be slightly longer than predicted by the Reedy-Arnold (1972) theoretical model. Secondary thermal neutron production from Cl-35 is invoked as an explanation for the flatter and deeper maximum seen in the Cl-36 profile.

Nishiizumi, K.↗

Al-26 depth profile in Apollo 15 drill core

Accelerator mass spectrometry is used in a study of galactic cosmic ray production profiles based on cosmic ray-produced Al-26 in the Apollo 15 long core. The results, which are in general agreement with earlier nondestructive counting data, are of significantly higher precision, yet systematically lower. The half-attenuation length for Al-26 production is presently calculated to be 122 g/sq cm, after normalizing the data to average chemical composition.

Nishiizumi, K.↗

A simple method of obtaining concentration depth-profiles from X-ray diffraction

The construction of composition profiles from X-ray intensity bands was investigated. The intensity band-to-composition profile transformation utilizes a solution which can be easily evaluated. The technique can be applied to thin films and thick speciments for which the variation of lattice parameters, linear absorption coefficient, and reflectivity with composition are known. A deconvolution scheme with corrections for the instrumental broadening and ak-alfadoublet is discussed.

Wiedemann, K. E.↗