Search NASA⌕ Search

SEARCH · Search NASA

Results for “direct conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Boundary layer measurements of the OH radical in the vicinity of an isolated power plant plume - SO2 and NO2 chemical conversion times

Direct measurements of the OH radical in the vicinity of an isolated power plant plume are reported. These measurements were used to estimate the conversion time of SO2 to H2SO4-sulfate aerosol via the initiating step OH + SO2 + M yields HSO3. Using the near-high-noon measured value of OH (9.5 million per cu cm), resulted in a 1/e conversion time of 1.4 days. The latter lifetime would correspond to a conversion rate of about 2%/hr. When the lifetime calculation was modified to take into consideration the OH diurnal cycle, the 1/e conversion time for SO2 was found to be 4.4 days, giving an apparent overall rate of conversion of about 0.7%/hr. Similar calculations carried out for the conversion of NO2 to NHO3 resulted in 1/e lifetimes for NO2 of 2-3 h for midday time periods.

Davis, D. D.↗
NASA NTRS1989

Global backscatter assessment

The focus of this effort is the development of a global-scale model of aerosol backscatter for laser atmospheric wind sounder (LAWS) design and performance studies. Background parameters are derived from aerosol data sets with global-scale spatial and/or temporal coverage, using objective statistical decomposition and/or a priori stratification based on supplementary data. Backscatter coefficients at the LAWS design wavelength are derived from background aerosol physical, chemical, and optical data, or from direct backscatter measurements at other wavelengths, using background conversion factors. Direct measurements of aerosol backscatter at 10.6 microns from the Royal Signals and Radar Establishment (RSRE) and the Wave Propagation Laboratory (WPL) were selected. The RSRE backscatter data processing code were optimized under low backscatter conditions, performed detailed analyses of collocated intercomparisons between the two lidars, and assisted in the analysis of the long-term backscatter climatologies from the two lidars. Timely presentation of global backscattering experiment (GLOBE) research results to the global geophysical community is required.

Bowdle, David A.↗
NASA NTRS1993

High efficiency direct thermal to electric energy conversion from radioisotope decay using selective emitters and spectrally tuned solar cells

Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1200K. Both selective emitter and filter system TPV systems are feasible. However, requirements on the filter system are severe in order to attain high efficiency. A thin-film of a rare-earth oxide is one method for producing an efficient, rugged selective emitter. An efficiency of 0.14 and power density of 9.2 W/KG at 1200K is calculated for a hypothetical thin-film neodymia (Nd2O3) selective emitter TPV system that uses radioisotope decay as the thermal energy source.

Chubb, Donald L.↗
NASA NTRS1978

Investigation of direct solar-to-microwave energy conversion techniques

Identification of alternative methods of producing microwave energy from solar radiation for purposes of directing power to the Earth from space is investigated. Specifically, methods of conversion of optical radiation into microwave radiation by the most direct means are investigated. Approaches based on demonstrated device functioning and basic phenomenologies are developed. There is no system concept developed, that is competitive with current baseline concepts. The most direct methods of conversion appear to require an initial step of production of coherent laser radiation. Other methods generally require production of electron streams for use in solid-state or cavity-oscillator systems. Further development is suggested to be worthwhile for suggested devices and on concepts utilizing a free-electron stream for the intraspace station power transport mechanism.

Chatterton, N. E.↗
NASA NTRS2018

Low Power Radioisotope Conversion Technology and Performance Summary

This work presents a summary of low-power radioisotope-based power sources. This includes systems that use direct energy conversion from radioactive decay such as betavoltaics and systems that convert heat generated by the isotope decay. These types of power systems have terrestrial and space-based applications. Their main application is to provide low levels of power in remote environments where long life and reliability are the main objectives. This work looked at the potential performance of these types of systems and the range of output power they can achieve. Also considered was the amount of power that could be achieved from these different conversion technologies, while remaining under the critical limit acceptable for space flight without the need for special handling and controls. This is of interest for space missions where low power levels can be used for operating sensors or other devices, but the expense associated with the incorporation of radioactive material above this critical level would be cost prohibitive.

Colozza, Anthony J.↗
NASA NTRS1986

AMTEC: High efficiency static conversion for space power

Future manned and unmanned space missions will require reliable, high efficiency energy conversion systems. For a manned Mars mission, power levels in the range of 10 to 100 kWe will be needed. The Alkali Metal Thermoelectric Converter (AMTEC) is a direct energy conversion technology with the potential to meet these needs. The AMTEC is a thermally regenerative electrochemical device that derives its operation from the sodium ion conducting properties of beta-alumina solid electrolyte (BASE). To date, an efficiency of 19%, area power density of 1 W/sq cm, and a lifetime of 10,000 hours at high temperature were demonstrated in laboratory devices. Systems studies show that projected AMTEC systems equal or surpass the performance of other static or dynamic systems in applications of 1 kWe-1 MWe. Thus, the laboratory experiments and applications studies conducted to date have shown that the AMTEC posseses great potential. In order to bring this technology to the stage where prototype units can be built and operated, several technical issues must be addressed. These include the need for long life, high power electrodes, minimization of radiative parasitic losses, and high temperature seals. In summary, the evidence shows that if AMTEC is developed, it can play a significant role in future space power applications.

Bankston, C. P.↗
NASA NTRS1977

Changing sunlight to microwaves: A concept

Electromechanical device converts sunlight into microwave energy by direct process. Still in conceptual stage, device is expected to be lighter and more efficient (ninety percent conversion efficiency) than less-direct conversion systems that employ solar panels and magnetrons. Besides uses in satellites and spacecraft as microwave source, device has many terrestrial applications, including use in fuel-saving sun-powered microwave oven.

Dickinson, R. M.↗
NASA NTRS1966

Status report

University research in materials, plasma, and engineering for direct energy conversion

PLASMA PHYSICS↗
NASA NTRS1969

Fuel cells- Their electrochemistry

Book on fuel cells electrochemistry covering direct energy conversion methods, electrode kinetics, electrocatalysis, organic substances, electrochemical combustion, research techniques, etc

Bockris, J. OM.↗
NASA NTRS1978

Strip cell test and evaluation program

The performance characteristics of alkaline fuel cells to be used for space power systems were tested. Endurance tests were conducted on the cells during energy conversion operations. A feature of the cells fabricated and tested was the capability to evaporate the product water formed during the energy conversion reaction directly to space vacuum. A fuel cell powerplant incorporating these cells does not require a condenser and a hydrogen recirculating pump water separator to remove the product water. This simplified the fuel cell powerplant system, reduced the systems weight, and reduced the systems parasite power.

Gitlow, B.↗
NASA NTRS1980

Rectenna session: Micro aspects

Two micro aspects of the rectenna design are addressed: evaluation of the degradation in net rectenna RF to DC conversion efficiency due to power density variations across the rectenna (power combining analysis) and design of Yagi-Uda receiving elements to reduce rectenna cost by decreasing the number of conversion circuits (directional receiving elements). The first of these micro aspects involves resolving a fundamental question of efficiency potential with a rectenna, while the second involves a design modification with a large potential cost saving.

Gutmann, R. J.↗