Search NASA⌕ Search

SEARCH · Search NASA

Results for “discharging method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effects of breach formation parameter uncertainty on inundation risk area and consequence analysis

According to the national inventory of dams (NID), there are approximately 79,500 dams in the United States, with 11,800 of these dams being classified as high-hazard. It has been recommended that each high-hazard dam in the United States have an emergency action plan (EAP), but it has been found that only about 60% of the high-hazard dams have a complete EAP. A major aspect of these plans is inundation risk area identification and associated impacts in the event of dam failure. In order to determine the inundation risk area an estimation of breach discharge must be completed. Most methods used to determine breach discharge, including the NWS-DAMBRK model, require modelers to select size, shape, and time of breach formation. Federal agencies (e.g. Bureau of Reclamation, Federal Energy Regulatory Commission) with oversight of U.S. dams have recommended ranges of values for each of these parameters based on dam type. However, variations in these parameters even within the recommended range have the potential to impose significant transformation on the discharge hydrograph relative to both timing and magnitude of the peak discharge. Therefore, it has also been recommended that sensitivity of these parameters be investigated when performing breach inundation analyses. This paper presents a sensitivity analysis of three breach parameters (average breach width, side slope, and time to failure) on a case study dam located in the United States. The sensitivity analysis employed was based on the 3{sup 3} factorial design, in which three levels (e.g. low, medium, and high) were selected for each of the three parameters, resulting in twenty-seven combinations. The three levels remained within the recommended range of values for each parameter type. With each combination of input parameters, a discharge hydrograph was generated and used as a source condition for inundation analysis using a two-dimensional shallow water equation model. The resulting simulations were compared to determine the sensitivity of flood inundation area, flood arrival time, peak flood depths, and socio-economic impacts (e.g. population at risk, direct and indirect economic loss) to changes in individual parameters and parameter interactions. Results and discussion from this sensitivity analysis will be presented in detail in the paper.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Apparatus for atmospheric pressure pin-to-hole spark discharge and uses thereof

Disclosed herein are atmospheric pressure pin-to-hole pulsed spark discharge devices and methods for creating plasma. The devices include a conduit for fluidically communicating a gas, a plasma, or both, therethrough, portion of the conduit capable of being connected to a gas supply, and a second portion of the conduit capable of emitting a plasma; a positive electrode comprising a sharp tip; and a ground plate electrode. Disclosed are methods for treating a skin ulcer using non-thermal plasma include flowing a gas through a cold spark discharge zone simultaneously with the creation of a pulsed spark discharge to give rise to a non-thermal plasma emitted from a conduit, the non-thermal plasma comprising NO; and contacting a skin ulcer with said non-thermal plasma for sufficient time and intensity to give rise to treatment of the skin ulcer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Apparatus for atmospheric pressure pin-to-hole spark discharge and uses thereof

Disclosed herein are atmospheric pressure pin-to-hole pulsed spark discharge devices and methods for creating plasma. The devices include a conduit for fluidically communicating a gas, a plasma, or both, therethrough, portion of the conduit capable of being connected to a gas supply, and a second portion of the conduit capable of emitting a plasma; a positive electrode comprising a sharp tip; and a ground plate electrode. Disclosed are methods for treating a skin ulcer using non-thermal plasma include flowing a gas through a cold spark discharge zone simultaneously with the creation of a pulsed spark discharge to give rise to a non-thermal plasma emitted from a conduit, the non-thermal plasma comprising NO; and contacting a skin ulcer with said non-thermal plasma for sufficient time and intensity to give rise to treatment of the skin ulcer.

Dobrynin, Danil V.↗

Methods for natural gas and heavy hydrocarbon co-conversion

A reactor for reactive co-conversion of heavy hydrocarbons and hydrocarbon gases and includes a dielectric barrier discharge plasma cell having a pair of electrodes separated by a dielectric material and passageway therebetween. An inlet is provided for feeding heavy hydrocarbons and other reactive materials to the passageway of the discharge plasma cell, and an outlet is provided for discharging reaction products from the reactor. A packed bed catalyst may optionally be used in the reactor to increase efficiency of conversion. The reactor can be modified to allow use of a variety of light sources for providing ultraviolet light within the discharge plasma cell. Methods for upgrading heavy hydrocarbons are also disclosed.

03 NATURAL GAS↗

Imaging Indicator for ESD Safety Testing

This report describes the development of a new detection method for electrostatic discharge (ESD) testing of explosives, using a single-lens reflex (SLR) digital camera and a 200-mm macro lens. This method has demonstrated several distinct advantages to other current ESD detection methods, including the creation of a permanent record, an enlarged image for real-time viewing as well as extended periods of review, and ability to combine with most other Go/No-Go sensors. This report includes details of the method, including camera settings and position, and results with well-characterized explosives PETN and RDX, and two ESD-sensitive aluminum powders.

Whinnery, LeRoy L.↗

Kinetics and product studies of the reaction ClO + BrO using discharge-flow mass spectrometry

The kinetics and product branching ratios of the reaction between ClO and BrO were studied at 1 torr pressure over the temperature range 220-400 K, using the method of discharge-flow mass spectrometry. Three product channels were identified and quantified: Br + ClOO, Br + OClO, and BrCl + O2, indicating that the reaction mechanism of ClO + BrO involves metastable intermediates. The overall reaction rate coefficient and the rate coefficients for the three channel reactions are given.

Friedl, Randall R.↗

Metal ion extraction from brines

A material includes a porous particle that includes a metal ion imprinted polymer. The metal ion imprinted polymer is formed from a hydrophilic co-monomer, a metal containing polymerizable compound, and a cross-linking agent. The metal containing polymerizable compound includes at least one metal chelating ligand. The metal ion imprinted polymer includes a plurality of metal ion selective binding sites. A method includes flowing brine containing a metal ion through a reactor that includes the material. The method further includes discharging the brine from the reactor, contacting the porous particles with water, and pressurizing the reactor with carbon dioxide. The carbon dioxide reacts with the adsorbed metal ions to form a metal carbonate solution. The method further includes depressurizing the reactor to precipitate metal carbonate from the metal carbonate solution and discharging the metal carbonate solution from the reactor.

36 MATERIALS SCIENCE↗

Application of Pulse Spark Discharges for Scale Prevention and Continuous Filtration Methods in Coal-Fired Power Plant

The overall objective of the present work was to develop a new scale-prevention technology by continuously precipitating and removing dissolved mineral ions (such as calcium and magnesium) in cooling water while the COC could be doubled from the present standard value of 3.5. The hypothesis of the present study was that if we could successfully precipitate and remove the excess calcium ions in cooling water, we could prevent condenser-tube fouling and at the same time double the COC. The approach in the study was to utilize pulse spark discharges directly in water to precipitate dissolved mineral ions in recirculating cooling water into relatively large suspended particles, which could be removed by a self-cleaning filter. The present study began with a basic scientific research to better understand the mechanism of pulse spark discharges in water and conducted a series of validation experiments using hard water in a laboratory cooling tower. Task 1 of the present work was to demonstrate if the spark discharge could precipitate the mineral ions in water. Task 2 was to demonstrate if the self-cleaning filter could continuously remove these precipitated calcium particles such that the blowdown could be eliminated or significantly reduced. Task 3 was to demonstrate if the scale could be prevented or minimized at condenser tubes with a COC of 8 or (almost) zero blowdown. In Task 1, we successfully completed the validation study that confirmed the precipitation of dissolved calcium ions in cooling water with the supporting data of calcium hardness over time as measured by a calcium ion probe. In Task 2, we confirmed through experimental tests that the self-cleaning filter could continuously remove precipitated calcium particles in a simulated laboratory cooling tower such that the blowdown could be eliminated or significantly reduced. In addition, chemical water analysis data were obtained which were used to confirm the COC calculation. In Task 3, we conducted a series of heat transfer fouling tests using a condenser heat exchanger in the laboratory cooling tower, from which we confirmed that the plasma water treatment technology could prevent or significantly mitigate mineral foulings in condenser tubes when compared with the no-treatment case. With the completion of the present work, a cooling water treatment technology using pulse spark discharges is currently ready for field-validation tests. The plasma water treatment technology is a true mechanical water softener with almost no maintenance, which continuously converts hard water to soft water spending a relatively small amount of energy. Such a mechanical water softener could find wide-spread applications to solve hard water problems both in industry and at home.

20 FOSSIL-FUELED POWER PLANTS↗

Concentrating lithium carbonate after regeneration of lithium sorbent

A system and method that includes flowing brine containing a metal ion through a reactor that includes porous particles having metal ion imprinted polymer having selective binding sites. The system and method further include discharging the brine from the reactor, contacting the porous particles with water, and pressurizing the reactor with carbon dioxide. The carbon dioxide reacts with the adsorbed metal ions to form a metal carbonate solution, where the metal carbonate solution can then be continuously purified with ion exchange. The method can include recycling eluent from the ion exchange back into the system for re-use. The method further includes depressurizing the reactor to precipitate metal carbonate from the metal carbonate solution and discharging the metal carbonate solution from the reactor.

Hornbostel, Marc↗

Laser schlieren deflectometry for temperature analysis of filamentary non-thermal atmospheric pressure plasma

The heat convection generated by micro filaments of a self-organized non-thermal atmospheric pressure plasma jet in Ar is characterized by employing laser schlieren deflectometry (LSD). It is demonstrated as a proof of principle, that the spatial and temporal changes of the refractive index n in the optical beam path related to the neutral gas temperature of the plasma jet can be monitored and evaluated simultaneously. The refraction of a laser beam in a high gradient field of n(r) with cylindrical symmetry is given for a general real refraction index profile. However, the usually applied Abel approach represents an ill-posed problem and in particular for this plasma configuration. A simple analytical model is proposed in order to minimize the statistical error. Based on that, the temperature profile, specifically the absolute temperature in the filament core, the FWHM, and the frequencies of the collective filament dynamics are obtained for non-stationary conditions. For a gas temperature of 700 K inside the filament, the presented model predicts maximum deflection angles of the laser beam of 0.3 mrad which is in accordance to the experimental results obtained with LSD. Furthermore, the experimentally obtained FWHM of the temperature profile produced by the filament at the end of capillary is (1.5 {+-} 0.2) mm, which is about 10 times wider than the visual radius of the filament. The obtained maximum temperature in the effluent is (450 {+-} 30) K and is in consistence with results of other techniques. The study demonstrates that LSD represents a useful low-cost method for monitoring the spatiotemporal behaviour of microdischarges and allows to uncover their dynamic characteristics, e.g., the temperature profile even for challenging diagnostic conditions such as moving thin discharge filaments. The method is not restricted to the miniaturized and self-organized plasma studied here. Instead, it can be readily applied to other configurations that produce measurable gradients of refractive index by local gas heating and opens new diagnostics prospects particularly for microplasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Jacobian-free Newton–Krylov method for the simulation of non-thermal plasma discharges with high-order time integration and physics-based preconditioning

A preconditioning framework for the numerical simulation of non-thermal streamer discharges is developed using the Jacobian-free Newton-Krylov (JFNK) method. A reduced plasma fluid model is considered, consisting of electrons, one positive ion, one negative ion, and the electrostatic potential. Here, the plasma kinetics model includes ionization, electron-ion recombination, electron attachment, electron detachment, and ion-ion recombination. The governing equations are made dimensionless, discretized in space with finite differences, and integrated in time with a fully implicit method based on high-order backward differentiation formulas. The preconditioning framework is based on a linearized form of the governing equations and physics-based operator splitting. The efficiency of the preconditioning strategy is assessed through two test cases: streamer propagation between parallel plates and an axisymmetric pin-to-pin discharge. The fully implicit approach overcomes traditional restrictions in the time step size due to processes such as electron drift, electron diffusion, and dielectric relaxation. Excellent performance is observed through relevant statistics of the JFNK solver, although the number of linear iterations increases for the pin-to-pin discharge when nonlinear numerical boundary conditions are imposed at the electrodes. Performance studies show scalability with O(100-1000) processors for O(10M) unknowns with ample room for optimization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Is it possible to deduce the ground state OH density from relative optical emission intensities of the OH(A 2 Σ + -X 2 Π i ) transition in atmospheric pressure non-equilibrium plasmas?—An analysis of self-absorption

The measurement of absolute densities of reactive species and radicals such as OH is of growing interest for many plasma applications. Here, we extend the use of a self-absorption model for atomic emission spectroscopy to molecular emission spectroscopy. The proposed analysis of self-absorbed molecular emission spectra is a simple and inexpensive method to determine OH(X) densities and rotational temperatures compared to laser induced fluorescence. We compare the recorded absolute OH density in a non-equilibrium diffuse atmospheric-pressure RF glow discharge by this method with broadband UV absorption considering a number of rotational lines with J' ≤ 6.5, the detection limit of the line integrated OH(X) density with this method is of the order of 2 × 10 19 m –2 . The accuracy of the density is sensitive to the rotational temperature of the OH(A) state and the non-equilibrium rotational population distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Method for forming precision clockplate with pivot pins

Methods are disclosed for producing a precision clockplate with rotational bearing surfaces (e.g. pivot pins). The methods comprise providing an electrically conductive blank, conventionally machining oversize features comprising bearing surfaces into the blank, optionally machining of a relief on non-bearing surfaces, providing wire accesses adjacent to bearing surfaces, threading the wire of an electrical discharge machine through the accesses and finishing the bearing surfaces by wire electrical discharge machining. The methods have been shown to produce bearing surfaces of comparable dimension and tolerances as those produced by micro-machining methods such as LIGA, at reduced cost and complexity.

42 ENGINEERING↗

Three point method to characterize low-pressure electronegative discharges using electrostatic probe

Electrostatic probe measurements for low-pressure inductively coupled SF{sub 6} plasmas are performed. From the current-voltage (I-V) curves of probe, the saturation currents of the positive ions and electrons and the electron temperature are measured. The electronegativity and the negative ion density are deduced by using the ratios of these parameters at three adjacent pressure points. The positive ion density is calculated by the orbital-motion-limited theory, and the electron temperatures are given either by the slope of the I-V curves or by the electron energy distribution function with the second derivative of I-V curves. The variations in the charged species density with pressure and power are investigated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of small oxygen additions on the small-signal-gain dynamics in the active medium of a pulsed electron-beam-controlled discharge CO laser

The method for measuring the rate constants of the VV' exchange between CO and O{sub 2} molecules is developed. The method is based on a comparison of the measured and numerically calculated small-signal-gain (SSG) dynamics in the active medium of a pulsed electron-beam-controlled cryogenic CO laser. The SSG dynamics was measured in CO-He-O{sub 2} mixtures with the fixed CO:He = 1:4 ratio by varying the oxygen content from 0 to 4%. The SSG dynamics was measured by probing the active medium of the pulsed CO laser by a beam from a tunable cw CO laser. The mathematical model of the CO laser takes into account the influence of oxygen on energy exchange processes. The parameters of the analytic approximation for constants of the near-resonance VV' exchange CO(v)+O{sub 2}(u=0) {yields} CO(v-1)+O{sub 2}(u=1) are determined by the developed method for quantum vibrational numbers v = 18-24. In particular, the rate constant for v = 20 is (3.1{+-}0.5)x10{sup -12} cm{sup 3} s{sup -1} at the gas temperature of 150 K. The extrapolation of the obtained analytic expression for rate constants in gases at room temperature gives the reasonable agreement with the measurements performed earlier for v = 12 and 13. (active media. lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The multipole resonance probe: A concept for simultaneous determination of plasma density, electron temperature, and collision rate in low-pressure plasmas

A diagnostic concept is presented which enables the simultaneous determination of plasma density, electron temperature, and collision rate in low-pressure gas discharges. The proposed method utilizes a radio-frequency driven probe of particular spherical design which is immersed in the plasma to excite a family of spatially bounded surface resonances. An analysis of the measured absorption spectrum S({omega}) of the probe provides information on the distribution of the plasma in its vicinity, from which the values of the plasma parameters can be inferred. In its simplest realization, the probe consists of two dielectrically shielded, conducting hemispheres, which are symmetrically driven by an radio-frequency source, and the excited resonances can be classified as multipole fields, which allows an analytical evaluation of the measured signal. The proposed method is robust, calibration free, economical, and can be used for ideal and reactive plasmas alike.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of vapor-deposited and solution-processed targets for laser-driven inertial confinement fusion experiments

Targets for low-adiabat direct-drive-implosion experiments on OMEGA must meet rigorous specifications and tight tolerances on the diameter, wall thickness, wall-thickness uniformity, and presence of surface features. Of these, restrictions on the size and number of defects (bumps and depressions) on the surface are the most challenging. The properties of targets that are made using vapor-deposition and solution-based microencapsulation techniques are reviewed. Targets were characterized using confocal microscopy, bright- and dark-field microscopy, atomic force microscopy, electron microscopy, and interferometry. Each technique has merits and limitations, and a combination of these techniques is necessary to adequately characterize a target. The main limitation with the glow-discharge polymerization (GDP) method for making targets is that it produces hundreds of domes with a lateral dimension of 0.7–2 μm. Polishing these targets reduces the size of some but not all domes, but it adds scratches and grooves to the surface. Solution-made polystyrene shells lack the dome features of GDP targets but have hundreds of submicrometer-size voids throughout the wall of the target; a few of these voids can be as large as ∼12 μm at the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of decelerating streamers in inhomogeneous atmosphere with implications for runaway electron generation

The dynamics of positive and negative streamers is numerically simulated in atmospheric pressure air in the range of parameters corresponding to the streamer deceleration and termination in the middle of the discharge gap. A detailed comparison with experiments in air at constant and variable density demonstrates good agreement between the 2D simulation results and the observations. It is shown that positive and negative streamers behave in radically different ways when decelerating and stopping. When the head potential drops, the negative streamer transits to the mode in which the propagation is due to the forward electron drift. In this case, the radius of the ionization wave front increases, whereas the electric field at the streamer head decreases further and the streamer stops. Its head diameter continues to increase due to the slow drift of free electrons in the residual under-breakdown field. On the contrary, the only advancement mechanism for a positive streamer with a decreasing head potential is a decrease in the effective radius of the ionization wave, leading to a local increase in the electric field. This mechanism makes it possible to compensate for the reduction in the efficiency of gas photoionization at small head diameters. A qualitative 1D model is suggested to describe streamer deceleration and stopping for different discharge polarities. Estimates show that, during positive streamer stopping, the local electric field at the streamer head can exceed the threshold corresponding to the transition of electrons to the runaway mode when the head potential (relative to the surrounding space) decreases to~1.2 kV in atmospheric pressure air. In this case, pulsed generation of a beam of runaway electrons directed into the channel of a stopping positive streamer can occur. The energy of the formed pulsed electron beam depends on the intensity of photoionization in front of the streamer head. This energy can vary from 700 V (when increasing the photoionization rate by a factor of 10 with respect to the value in atmospheric pressure air) to 2.6 kV (when decreasing the photoionization rate by a factor of 1000). It is possible that this behavior of decelerating positive streamers can explain the observed bursts of x-ray radiation during the streamer propagation in long air gaps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗