Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution line modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Flare model chromospheres and photospheres

Homogeneous plane-parallel model atmospheres for solar flares have been constructed to approximately simulate observations of flares. The wings of the Ca II lines have been used to derive flare upper photosphere models, which indicate temperature increases of about 100 K over the temperature distribution in the pre-existing facula at a height of 300 km. In the case of flares covering sunspots the temperature rise seems to occur much higher in the atmosphere. We find that with increasing flare importance the heights of the upper chromosphere and transition region occur lower in the solar atmosphere, accounting for the factor of 60-600 increase in pressure in these regions relative to the quiet sun. The Ca II line profiles agree with observations only by assuming a macrovelocity distribution that increases with height. Also, the chromospheric parts of flares appear to be highly inhomogeneous. We show that shock and particle heated flare models do not agree with the observations and propose a thermal response model for flares. In particular, it appears that heating in the photosphere is an essential aspect of flares.

Machado, M. E.↗
NASA NTRS1983

Calculation of potential flow past non-lifting bodies at angle of attack using axial and surface singularity methods

Two different singularity methods have been utilized to calculate the potential flow past a three dimensional non-lifting body. Two separate FORTRAN computer programs have been developed to implement these theoretical models, which will in the future allow inclusion of the fuselage effect in a pair of existing subcritical wing design computer programs. The first method uses higher order axial singularity distributions to model axisymmetric bodies of revolution in an either axial or inclined uniform potential flow. Use of inset of the singularity line away from the body for blunt noses, and cosine-type element distributions have been applied to obtain the optimal results. Excellent agreement to five significant figures with the exact solution pressure coefficient value has been found for a series of ellipsoids at different angles of attack. Solutions obtained for other axisymmetric bodies compare well with available experimental data. The second method utilizes distributions of singularities on the body surface, in the form of a discrete vortex lattice. This program is capable of modeling arbitrary three dimensional non-lifting bodies. Much effort has been devoted to finding the optimal method of calculating the tangential velocity on the body surface, extending techniques previously developed by other workers.

Shu, J. Y.↗
NASA NTRS1976

Treatment of atomic and molecular line blanketing by opacity sampling

A sampling technique for treating the radiative opacity of large numbers of atomic and molecular lines in cool stellar atmospheres is subjected to several tests. In this opacity sampling (OS) technique, the global opacity is sampled at only a selected set of frequencies, and at each of these frequencies the total monochromatic opacity is obtained by summing the contribution of every relevant atomic and molecular line. In accord with previous results, we find that the structure of atmospheric models is accurately fixed by the use of 1000 frequency points, and 100 frequency points are adequate for many purposes. The effects of atomic and molecular lines are separately studied. A test model computed using the OS method agrees very well with a model having identical atmospheric parameters, but computed with the giant line (opacity distribution function) method.

Johnson, H. R.↗
NASA NTRS1988

Return stroke velocities and currents using a solid state silicon detector system

A small, portable device has been developed to measure return stroke velocities. With the device, velocities from 135 strokes that consist of 92 natural return strokes and 43 triggered return strokes have been analyzed. The average return stroke velocity for longer channels, greater than 500 meters, is 1.2 + or - 0.3 x 10 to the 8th m/s for both natural and triggered return strokes. For shorter channel lengths, less than 500 m, natural lightning has a statistically higher average return stroke velocity of 1.9 + or - 0.7 x 10 to the 8th m/s than triggered lightning with an average return stroke velocity of 1.4 + or - 0.4 x 10 to the 8th m/s. Using the transmission line model of the return stroke, natural lightning has a peak current distribution that is log-normal with a median value of 19 kA. Return stroke velocities and currents were determined for two distant single stroke natural positive cloud-to-ground flashes. The velocities were 1.0 and 1.7 x 10 to the 8th ms/s while the estimated peak current for each positive flash was over 125 kA.

Mach, Douglas M.↗
NASA NTRS1991

Convection of ion cyclotron waves to ion-heating regions

Results are presented on calculations of the convection, to lower altitudes, of low-frequency ion cyclotron waves generated in the central plasma sheet. In the calculations, ion cyclotron waves generated in the equatorial plane by a proton temperature anisotropy are considered, and the computed growth rates are used to create a model wave distribution. Spectral densities are then mapped along the magnetic field lines, using phase space methods of Ronnmark and Larsson (1988). It was found that, even in the absence of growth associated with a plasma instability, the electric fields of ion cyclotron emissions from the equatorial region will increase substantially as the waves propagate to higher latitudes. It is shown that ion cyclotron waves propagating down the field lines may contribute to the waves observed together with ion conics.

Ronnmark, Kjell↗
NASA NTRSDate not supplied

Impedance Matching a Quarter Wave Resonant Receiver to Improve Efficiency in Unipolar Capacitive Wireless Power Transfer

Impedance matching techniques to achieve high performance in conventional wireless power transfer (WPT) systems are well established. These WPT systems are modelled as a lumped circuit, where the voltages/currents are approximately uniform and mostly unaffected by parasitic elements. However, a group of WPT techniques exist that utilize parasitic elements to form a highly resonant power transfer condition at high quality factors, exploiting a distributed circuit operation that can be modeled as a mutually coupled transmission line. A calculated matching network typically becomes unmatched when connected to the transmission line, as it changes the electrical structure of the coupled transmission line. This is particularly true for WPT systems that use quarter wave (QWR) or half wave resonators (HWR) for the receiver. Here we present one technique of matching to a mutually coupled transmission line where a parallel path is formed that improves the power transfer efficiency without severely altering the transmission line characteristics.

Wireless↗
NASA NTRS1978

The rocket-ultraviolet spectrum and models of the planetary nebula NGC 7662

Ultraviolet spectral analysis of NGC 7662 has revealed a Balmer line distribution indicating a C/O ratio of unity. This abundance of carbon is characteristic of mixing between the central star and the outer envelope of the planetary nebula. A continuum spectrum is observed from the star and the nebula, radiating its energy via the two photon process through neutral hydrogen. Spectral lines were fitted to apply to the predictions of three models of the nebular structure. UV observations were compared with visible, IR, and radio observations.

Bohlin, R. C.↗
NASA NTRS2002

Physical Conditions in the Central Parsec Derived from Mid-Infrared Imaging Photometry

Array camera images of the central 1 parsec of the Galactic Center at eight mid-infrared wavelengths between 4.8 and 20.0 microns with approximately 1 arcsec resolution are used to model the temperature, opacity and bolometric luminosity distributions of the emitting dust in the central parsec, and the extinction in the line of sight. We use the results to discriminate between two mechanisms for heating the dust: heating by radiation from a "central engine" (possibly a massive black hole associated with Sgr A*), or internal heating by luminous stars embedded in or among the dust clouds. The temperature and opacity distributions are consistent with the presence of self-luminous objects imbedded at prominent the IRS source positions. However, temperatures on the northern ann and east-west bar are highest along the inner flank of those structures surrounding the central cavity, while the dust opacity peaks further out from the central cavity. The warm inner ridge suggests heating by centrally located concentrated luminous sources, including IRS3 and IRS7. The of the model results are compared with the distributions of the various stellar populations in the central parsec. There is evidence for physical interaction between the warm emitting dust and luminous stars, including dozens of hot He1 emission line stars and B[] stars. The combined contributions of embedded stars at the IRS source positions and the luminous stars distributed throughout Sgr A West can account for the temperature enhancements and the luminosity distribution in the central parsec computed by the model.

Gezari, Dan↗
NASA NTRS1976

Wing surface-jet interaction characteristics of an upper-surface blown model with rectangular exhaust nozzles and a radius flap

The wing surface jet interaction characteristics of an upper surface blown transport configuration were investigated in the Langley V/STOL tunnel. Velocity profiles at the inboard engine center line were measured for several chordwise locations, and chordwise pressure distributions on the flap were obtained. The model represented a four engine arrangement having relatively high aspect ratio rectangular spread, exhaust nozzles and a simple trailing edge radius flap.

Bloom, A. M.↗
NASA NTRS1982

Load distributions in photoeleastic bolted-joint models

An attempt is made to study the stresses in multiple-bolt connectors, focusing on the stress distribution in a two-pin connector, the two pins being in line and in parallel with the direction of the applied load. The photoelastic modeling approach with two-dimensional transmission photoelasticity is used. The joint models and model fringe patterns are discussed, with special attention given to the existence of a photoelastic isotropic point and to the separation of stresses.

Hyer, M. W.↗
NASA NTRS2004

Research on Spectroscopy, Opacity, and Atmospheres

I propose to continue providing observers with basic data for interpreting spectra from stars, novas, supernovas, clusters, and galaxies. These data will include allowed forbidden line lists both laboratory and computed, for the first five to ten ions of all atoms and for all relevant diatomic molecules. I will eventually expend to all ions of the first thirty elements to treat far UV end X-ray spectra, and for envelope opacities. I also include triatomic molecules providing by other researchers. I have made CDs with Partridge and Schwanke's water data for work on M stars.The luna data also serve as input to my model atmosphere and synthesis programs that generated energy distributions, photometry, limb darkening, and spectra that can be used for planning observations and for fitting observed spectra. The spectrum synthesis programs produce detailed plots with the line identified. Grids of stellar spectra can be used for radial velocity-, rotation-, or abundance templates and for population synthesis. I am fitting spectra of bright stars to test the data and to produce atlases to guide observer. For each star the whole spectrum is computed from the UV to the far IR. The line data, opacities, models, spectra, and programs are freely distributed on CDs and on my web site and represent a unique resource for many NASA programs.

Oliversen, Ronald↗
NASA NTRS1979

3C 279 - The case for 'superluminal' expansion

The compact extragalactic radio source 3C 279 was observed with the Haystack-Goldstone interferometer (wavelength approximately 3.8 cm) during six separate sessions spread between October 1970 and April 1972. The fringe amplitudes from each of these observation sessions were consistent with a two-component model of the brightness distribution of the source. The position angle of the line joining the components remained at 38 + or - 2 deg, while the angular separation between the components increased nearly linearly at the rate of 0.5 + or 0.1 milliarcsec/yr during this period. The corresponding apparent expansion speed is (21 + or - 4)c, for H = 50 km/s per Mpc and q = 0.05

Cotton, W. D.↗
NASA NTRS1986

Spectral energy distributions of active galactic nuclei between 0.1 and 100 microns

The 0.1-100-micron line-free spectral energy distributions of 29 AGN are characterized by fitting simple models to data from IRAS and IUE observations and ground-based NIR and optical spectrophotometry. The data are presented in tables and graphs and discussed in detail. It is found that nuclear dust does not play a major role in most of the Seyfert 1 galaxies and QSOs, which can be described by a model with four spectral components.

Edelson, R. A.↗
NASA NTRS1984

Line emission from H II blister models

Numerical techniques to calculate the thermal and geometric properties of line emission from H II 'blister' regions are presented. It is assumed that the density distributions of the H II regions are a function of two dimensions, with rotational symmetry specifying the shape in three-dimensions. The thermal and ionization equilibrium equations of the problem are solved by spherical modeling, and a spherical sector approximation is used to simplify the three-dimensional treatment of diffuse ionizing radiation. The global properties of H II 'blister' regions near the edges of a molecular cloud are simulated by means of the geometry/density distribution, and the results are compared with observational data. It is shown that there is a monotonic increase of peak surface brightness from the i = 0 deg (pole-on) observational position to the i = 90 deg (edge-on) position. The enhancement of the line peak intensity from the edge-on to the pole-on positions is found to depend on the density, stratification, ionization, and electron temperature weighting. It is found that as i increases, the position of peak line brightness of the lower excitation species is displaced to the high-density side of the high excitation species.

Rubin, R. H.↗
NASA NTRS1982

Low resolution ultraviolet and optical spectrophotometry of symbiotic stars

Low resolution International Ultraviolet Explorer spectra combined with optical spectrophotometry provide absolute flux distributions for seven symbiotic variables from 1200 to 6450 A. For five stars (EG And, BF Cyg, CI Cyg, AG Peg, and Z And) the data are representative of the quiescent/out-of-eclipse energy distributions; for CH Cyg and AX Per, the observations were obtained following their atest outburst in 1977 and 1978, respectively. The de-reddened distributions reveal a remarkable diversity of both line spectra and continua. While the optical and near infrared regions lambda = 5500 A) are well represented by single component stellar models, multicomponent flux distributions are required to reproduce the ultraviolet continua.

Slovak, M. H.↗
NASA NTRS2018

An Approach for Utilizing Power Flow Modeling for Simulations of Hybrid Electric Propulsion Systems

This paper describes an approach to creating simulations of the electric components for a hybrid electric propulsionsystem. The proposed modeling technique is based on power/load flow modeling and is designed to provide a modularframework that includes buses, lines, and other electrical components that can be connected together to form the electrical distribution system. The purpose of this paper is to detail an electric distribution system modeling technique and to demonstrate how these models may be integrated with turbomachinery simulations. These general modeling techniques were created to be utilized for system and control design studies. Additionally, steady-state and dynamic performance for a proposed model example is compared with data from a hardware in the loop simulation.

Power Flow↗