Search NASA⌕ Search

SEARCH · Search NASA

Results for “eddying model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Linear Multivariable Regression Models for Prediction of Eddy Dissipation Rate from Available Meteorological Data

Linear multivariable regression models for predicting day and night Eddy Dissipation Rate (EDR) from available meteorological data sources are defined and validated. Model definition is based on a combination of 1997-2000 Dallas/Fort Worth (DFW) data sources, EDR from Aircraft Vortex Spacing System (AVOSS) deployment data, and regression variables primarily from corresponding Automated Surface Observation System (ASOS) data. Model validation is accomplished through EDR predictions on a similar combination of 1994-1995 Memphis (MEM) AVOSS and ASOS data. Model forms include an intercept plus a single term of fixed optimal power for each of these regression variables; 30-minute forward averaged mean and variance of near-surface wind speed and temperature, variance of wind direction, and a discrete cloud cover metric. Distinct day and night models, regressing on EDR and the natural log of EDR respectively, yield best performance and avoid model discontinuity over day/night data boundaries.

MCKissick, Burnell T.↗
NASA NTRS1996

A Model for Axial Magnetic Bearings Including Eddy Currents

This paper presents an analytical method of modelling eddy currents inside axial bearings. The problem is solved by dividing an axial bearing into elementary geometric forms, solving the Maxwell equations for these simplified geometries, defining boundary conditions and combining the geometries. The final result is an analytical solution for the flux, from which the impedance and the force of an axial bearing can be derived. Several impedance measurements have shown that the analytical solution can fit the measured data with a precision of approximately 5%.

Kucera, Ladislav↗
NASA NTRS1988

A defect stream function, law of the wall/wake method for turbulent boundary layers

The application of the defect stream function to the solution of the two-dimensional, incompressible boundary layer problem is reexamined. A law-of-the-wall/law-of-the-wake formulation for the inner part of the boundary layer is presented which greatly simplifies the computational task near the wall and eliminates the need for an eddy viscosity model in this region. The eddy viscosity model in the outer part of the boundary layer is arbitrary. Formulations for both equilibrium and nonequilibrium boundary layers are presented, and results are compared with previous methods for equilibrium boundary layers. A formulation for primitive variables is presented. The present treatments eliminate the need for resolving the flow in the inner part of the boundary layer computationally, thereby improving computational efficiency.

Barnwell, Richard W.↗
NASA NTRS1989

A defect stream function, law of the wall/wake method for compressible turbulent boundary layers

The application of the defect stream function to the solution of the two-dimensional, compressible boundary layer is examined. A law of the wall/law of the wake formulation for the inner part of the boundary layer is presented which greatly simplifies the computational task near the wall and eliminates the need for an eddy viscosity model in this region. The eddy viscosity model in the outer region is arbitrary. The modified Crocco temperature-velocity relationship is used as a simplification of the differential energy equation. Formulations for both equilibrium and nonequilibrium boundary layers are presented including a constrained zero-order form which significantly reduces the computational workload while retaining the significant physics of the flow. A formulation for primitive variables is also presented. Results are given for the constrained zero-order and second-order equilibrium formulations and are compared with experimental data. A compressible wake function valid near the wall has been developed from the present results.

Barnwell, Richard W.↗
NASA NTRS1988

Model consistency in large eddy simulation of turbulent channel flows

Combinations of filters and subgrid scale stress models for large eddy simulation of the Navier-Stokes equations are examined by a priori tests and numerical simulations. The structure of the subgrid scales is found to depend strongly on the type of filter used, and consistency between model and filter is essential to ensure accurate results. The implementation of consistent combinations of filter and model gives more accurate turbulence statistics than those obtained in previous investigations in which the models were chosen independently from the filter. Results and limitations of the a priori test are discussed. The effect of grid refinement is also examined.

Piomelli, Ugo↗
NASA NTRS2022

A Dynamic Nonlinear Subgrid-Scale Model for Large-Eddy Simulation of Complex Turbulent Flows

We present a new dynamic nonlinear subgrid-scale (SGS) model for large-eddy simulations (LES) and apply it to compute a flow involving pressure gradients, surface curvature and separation, for which data from a direct numerical simulation are available for comparison. The model, inspired by the triple model idea of Bardina et al. (“Improved Turbulence Models Based on Large Eddy Simulation of Homogeneous, Incompressible, Turbulent Flows,” Report No. TF-19, Thermosciences Division, Department of Mechanical Engineering, Stanford University, 1983), includes a Galilean-invariant term called the modified Leonard stress tensor, and two nonlinear terms comprised of the products of the strain-rate and rotation-rate tensors for an improved representation of the subgrid-scale dissipation, backscatter and anisotropy effects. The model does not employ any ad hoc averaging or clipping procedures, and does not require the specification of a characteristic length scale; hence, it naturally avoids the ambiguities associated with defining a proper length scale for anisotropic grids. Results from the wall-resolved LES of flow past a Gaussian bump using the new model demonstrate improved prediction of skin-friction, flow separation, mean flow profiles and turbulent quantities when compared to implicit LES as well as explicit LES using the Vreman SGS model on the same grid.

Turbulence↗
NASA NTRS1995

A new non-eddy viscosity subgrid-scale model and its application to channel flow

To date, most large-eddy simulations (LES) have been carried out with eddy viscosity subgrid scale (SGS) models, with only a few exceptions that used the mixed model. Even though the assumptions behind Smagorinsky's model are rather stringent, it has been applied successfully to a variety of turbulent flows. This success is attributed to the ability of eddy viscosity models to drain energy from large scales, thus simulating the dissipative nature of turbulence. Most SGS models are absolutely dissipative, i.e. they remove energy from the large scales at every instant. However, SGS stresses may transfer energy back to the large scales intermittently; this reverse transfer or backscatter is especially important in geophysical flows and in transition. In a fully developed channel flow, there is reverse flow of energy from small to large scales near the walls, but eddy viscosity models are unable to account for this important feature. The dynamic localization eddy viscosity model of Ghosal et al. (1995) allows backscatter by co-evolving an auxiliary equation for the SGS energy; however, the computational cost is considerably larger than for conventional SGS models (Cabot 1994). In this report, a new non-eddy viscosity model based on local approximation of total quantities in terms of filtered ones is introduced; the scale similarity model of Bardina (1983) is a special case of this model. This procedure does not require the assumption of homogeneity, permits backscatter of energy from small to large scales, and is readily implemented in finite difference codes. The results of applying the proposed model to second order finite volume simulation of plane channel flow at high Reynolds numbers (Re(sub b) = 38,000) is described in this report. Greater emphasis is placed on the high Reynolds number flow since it provides a more rigorous test of the SGS model and its potential application. The results are compared to ones produced by the conventional and dynamic Smagorinsky models and the spectral LES of Piomelli (1993).

Shah, K. B.↗
NASA NTRS1995

A family of dynamic models for large-eddy simulation

Since its first application, the dynamic procedure has been recognized as an effective means to compute rather than prescribe the unknown coefficients that appear in a subgrid-scale model for Large-Eddy Simulation (LES). The dynamic procedure is usually used to determine the nondimensional coefficient in the Smagorinsky (1963) model. In reality the procedure is quite general and it is not limited to the Smagorinsky model by any theoretical or practical constraints. The purpose of this note is to consider a generalized family of dynamic eddy viscosity models that do not necessarily rely on the local equilibrium assumption built into the Smagorinsky model. By invoking an inertial range assumption, it will be shown that the coefficients in the new models need not be nondimensional. This additional degree of freedom allows the use of models that are scaled on traditionally unknown quantities such as the dissipation rate. In certain cases, the dynamic models with dimensional coefficients are simpler to implement, and allow for a 30% reduction in the number of required filtering operations.

Carati, D.↗
NASA NTRS1998

The NASA-Langley Wake Vortex Modelling Effort in Support of an Operational Aircraft Spacing System

Two numerical modelling efforts, one using a large eddy simulation model and the other a numerical weather prediction model, are underway in support of NASA's Terminal Area Productivity program. The large-eddy simulation model (LES) has a meteorological framework and permits the interaction of wake vortices with environments characterized by crosswind shear, stratification, humidity, and atmospheric turbulence. Results from the numerical simulations are being used to assist in the development of algorithms for an operational wake-vortex aircraft spacing system. A mesoscale weather forecast model is being adapted for providing operational forecast of winds, temperature, and turbulence parameters to be used in the terminal area. This paper describes the goals and modelling approach, as well as achievements obtained to date. Simulation results will be presented from the LES model for both two and three dimensions. The 2-D model is found to be generally valid for studying wake vortex transport, while the 3-D approach is necessary for realistic treatment of decay via interaction of wake vortices and atmospheric boundary layer turbulence. Meteorology is shown to have an important affect on vortex transport and decay. Presented are results showing that wake vortex transport is unaffected by uniform fog or rain, but wake vortex transport can be strongly affected by nonlinear vertical change in the ambient crosswind. Both simulation and observations show that atmospheric vortices decay from the outside with minimal expansion of the core. Vortex decay and the onset three-dimensional instabilities are found to be enhanced by the presence of ambient turbulence.

Proctor, Fred H.↗
NASA NTRS2012

Detached-Eddy Simulation Based on the V2-F Model

Detached-eddy simulation (DES) based on the v(sup 2)-f Reynolds-averaged Navier-Stokes (RANS) model is developed and tested. The v(sup 2)-f model incorporates the anisotropy of near-wall turbulence which is absent in other RANS models commonly used in the DES community. The v(sup 2)-f RANS model is modified in order the proposed v(sup 2)-f-based DES formulation reduces to a transport equation for the subgrid-scale kinetic energy isotropic turbulence. First, three coefficients in the elliptic relaxation equation are modified, which is tested in channel flows with friction Reynolds number up to 2000. Then, the proposed v(sup 2)-f DES model formulation is derived. The constant, C(sub DES), required in the DES formulation was calibrated by simulating both decaying and statistically-steady isotropic turbulence. After C(sub DES) was calibrated, the v(sub 2)-f DES formulation is tested for flow around a circular cylinder at a Reynolds number of 3900, in which case turbulence develops after separation. Simulations indicate that this model represents the turbulent wake nearly as accurately as the dynamic Smagorinsky model. Spalart-Allmaras-based DES is also included in the cylinder flow simulation for comparison.

Jee, Sol Keun↗