Search NASA⌕ Search

SEARCH · Search NASA

Results for “edge processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

NIST: Soil Respiration, Moisture, Temperature, Chemistry; and Fine Root Measurements from a Transect Through a Forest Edge, Gaithersburg, Maryland, 2017-2021

This dataset contains soil respiration, moisture, temperature, and chemistry, as well as fine root measurements from the National Institute of Standards and Technology (NIST) Forested Optical Reference for Evaluating Sensor Technology (FOREST) research facility at Gaithersburg, Maryland. Measurements were taken at an existing transect array that begins in a grassy meadow, crosses a sharp forest edge, then a small stream, and finally extends upwards in the interior of the forest at the top of a ridge. There are 6 different landscape positions replicated across three transects in the array. Soil respiration was measured during growing seasons in 2017-2019 (2017-06-02 to 2020-02-27). Pedons (1 m3) were isolated from surrounding tree roots using trenching and a fabric to inhibit root ingrowth. Flux measurements inside the pedons were thus assumed to represent heterotrophic only respiration in 2019, and these fluxes were paired with nearby fluxes assumed to represent total respiration. Deep vertical probes measured volumetric moisture content and temperature at the same points in the array every 10 cm in depth to either 90 cm or 120 cm total depth, at 15 minute intervals, from 2019-2021 (2019-07-09 to 2021-09-10). Soil core samples were collected from each of the array points for three different months in early- to mid-2019 (2019-03-19 to 2019-07-10), at three depths each. Soils were analyzed for gravimetric moisture content; pH; total carbon, nitrogen, and phosphorus; texture; microbial biomass carbon, nitrogen, and phosphorus; extractable dissolved organic carbon, nitrogen, and phosphorus; extractable nitrate and ammonia; and extracellular hydrolytic enzyme activities. The fine roots were separated from the cores and segregated by plant functional type (grass or tree species) and if they were dead or alive. Fine roots were then measured for length, surface area, diameter, and dry mass. This dataset contains four data files in comma separated (*.csv) format. These data serve to deepen our understanding of root and soil processes at forest edges and in transitional zones.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Reversible Modification of Rashba States in Topological Insulators at Room Temperature by Edge Functionalization

Quantum materials with novel spin textures from strong spin-orbit coupling (SOC) are essential components for a wide array of proposed spintronic devices. Topological insulators have a necessary strong SOC that imposes a unique spin texture on topological states and Rashba states that arise on the boundary, but there is no established methodology to control the spin texture reversibly. Here, it is demonstrated that functionalizing Bi 2 Se 3 films by altering the step-edge termination directly changes the strength of SOC and thereby modifies the Rashba strength of 1D edge states. Scanning tunneling microscopy/spectroscopy shows that these Rashba edge states arise and subsequently vanish through the Se functionalization and reduction process of the step edges. The observations are corroborated by density functional theory calculations, which show that a subtle chemical change of edge termination fundamentally alters the underlying electronic structure. Importantly, fully reversible and repeatable switching of Rashba edge states across multiple cycles at room temperature is experimentally demonstrated. The results imply Se functionalization as a practical method to control SOC and spin texture of quantum states in topological insulators.

Rashba edge states↗
DOE OSTI2023

Lewis Acid Supported Nickel Nitrenoids

Abstract Metalation of the polynucleating ligand F,tbs LH 6 (1,3,5‐C 6 H 9 (NC 6 H 3 −4‐F−2‐NSiMe 2 t Bu) 3 ) with two equivalents of Zn(N(SiMe 3 ) 2 ) 2 affords the dinuclear product ( F,tbs LH 2 )Zn 2 ( 1 ), which can be further deprotonated to yield ( F,tbs L)Zn 2 Li 2 (OEt 2 ) 4 ( 2 ). Transmetalation of 2 with NiCl 2 (py) 2 yields the heterometallic, trinuclear cluster ( F,tbs L)Zn 2 Ni(py) ( 3 ). Reduction of 3 with KC 8 affords [KC 222 ][( F,tbs L)Zn 2 Ni] ( 4 ) which features a monovalent Ni centre. Addition of 1‐adamantyl azide to 4 generates the bridging μ 3 ‐nitrenoid adduct [K(THF) 3 ][( F,tbs L)Zn 2 Ni(μ 3 ‐NAd)] ( 5 ). EPR spectroscopy reveals that the anionic cluster possesses a doublet ground state ( S = ). Cyclic voltammetry of 5 reveals two fully reversible redox events. The dianionic nitrenoid [K 2 (THF) 9 ][( F,tbs L)Zn 2 Ni(μ 3 ‐NAd)] ( 6 ) was isolated and characterized while the neutral redox isomer was observed to undergo both intra‐ and intermolecular H‐atom abstraction processes. Ni K‐edge XAS studies suggest a divalent oxidation state for the Ni centres in both the monoanionic and dianionic [Zn 2 Ni] nitrenoid complexes. However, DFT analysis suggests Ni‐borne oxidation for 5 .

Juda, Cristin E.↗
DOE OSTI2024

Principal Landau determinants

We reformulate the Landau analysis of Feynman integrals with the aim of advancing the state of the art in modern particle-physics computations. We contribute new algorithms for computing Landau singularities, using tools from polyhedral geometry and symbolic/numerical elimination. Inspired by the work of Gelfand, Kapranov, and Zelevinsky (GKZ) on generalized Euler integrals, we define the principal Landau determinant of a Feynman diagram. We illustrate with a number of examples that this algebraic formalism allows to compute many components of the Landau singular locus. We adapt the GKZ framework by carefully specializing Euler integrals to Feynman integrals. For instance, ultraviolet and infrared singularities are detected as irreducible components of an incidence variety, which project dominantly to the kinematic space. We compute principal Landau determinants for the infinite families of one-loop and banana diagrams with different mass configurations, and for a range of cutting-edge Standard Model processes. Furthermore, our algorithms build on the Julia package this http URL and are implemented in the new open-source package this http URL available at this https URL.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Explore Spatio‐Temporal Learning of Large Sample Hydrology Using Graph Neural Networks

Abstract Streamflow forecasting over gauged and ungauged basins play a vital role in water resources planning, especially under the changing climate. Increased availability of large sample hydrology data sets, together with recent advances in deep learning techniques, has presented new opportunities to explore temporal and spatial patterns in hydrological signatures for improving streamflow forecasting. The purpose of this study is to adapt and benchmark several state‐of‐the‐art graph neural network (GNN) architectures, including ChebNet, Graph Convolutional Network (GCN), and GraphWaveNet, for end‐to‐end graph learning. We explicitly represent river basins as nodes in a graph, learn the spatiotemporal nodal dependencies, and then use the learned relations to predict streamflow simultaneously across all nodes in the graph. The efficacy of the developed GNN models is investigated using the Catchment Attributes and MEteorology for Large‐sample Studies (CAMELS) data set under two settings, fixed graph topology (transductive learning), and variable graph topology (inductive learning), with the latter applicable to prediction in ungauged basins (PUB). Results indicate that GNNs are generally robust and computationally efficient, achieving similar or better performance than a baseline model trained using the long short‐term memory (LSTM) network. Further analyses are conducted to interpret the graph learning process at the edge and node levels and to investigate the effect of different model configurations. We conclude that graph learning constitutes a viable machine learning‐based method for aggregating spatiotemporal information from a multitude of sources for streamflow forecasting

Sun, Alexander Y.↗
DOE OSTI2023

Dynamics of rapidly spinning blob-filaments: Fluid theory with a parallel kinetic extension

Blob-filaments (or simply “blobs”) are coherent structures formed by turbulence and sustained by nonlinear processes in the edge and scrape-off layer (SOL) of tokamaks and other magnetically confined plasmas. The dynamics of these blob-filaments, in particular, their radial motion, can influence the scrape-off layer width and plasma interactions with both the divertor target and with the main chamber walls. Motivated by recent results from the XGC1 gyrokinetic simulation code reported on elsewhere [J. Cheng et al., Nucl. Fusion 63, 086015 (2023)], a theory of rapidly spinning blob-filaments has been developed for this work. The theory treats blob-filaments in the closed flux surface region or the region that is disconnected from sheaths in the SOL. It extends previous work by treating blob spin, arising from partially or fully adiabatic electrons, as the leading-order effect and retaining inertial (ion charge polarization) physics in next order. Spin helps to maintain blob coherency and affects the blob's propagation speed. Dipole charge polarization, treated perturbatively, gives rise to blob-filaments with relatively slow radial velocity, comparable to that observed in the simulations. The theory also treats the interaction of rapidly spinning blob-filaments with a zonal flow layer. It is shown analytically that the flow layer can act like a transport barrier for these structures. Finally, parallel electron kinetic effects are incorporated into the theory. Various asymptotic parameter regimes are discussed, and asymptotic expressions for the radial and poloidal motion of the blob-filaments are obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Preliminary hyperspectral neutron radiography of binder jet 3D printed and melt infiltrated Si–SiC

The preliminary results of hyperspectral neutron radiography of Si–SiC made with binder jet additive manufacturing, subsequent carbon addition, and silicon melt infiltration are presented. The samples were measured in the processing states before and after the melt infiltration to determine if neutrons would help characterize the microstructure to better understand the melt infiltration process. Theoretical Bragg edges were calculated for comparison with the radiographic results. The changes in the Bragg edges from pre- to post-infiltrated reaction-bonded SiC were evident, that could be used to address the differences in microstructures. In conclusion, the preliminary results presented in this study demonstrated that neutron Bragg-edge imaging is possible with Si–SiC reaction-bonded ceramics and can help determine the microstructure of melt infiltrated samples.

SiC↗
DOE OSTI2022

Reimagining Codesign for Advanced Scientific Computing: Report for the ASCR Workshop on Reimagining Codesign

In March 2021, the U.S. Department of Energy’s Advanced Scientific Computing Research program convened the Workshop on Reimagining Codesign. The workshop, also known as ReCoDe, was organized around discussions on eight topic areas: (1) codesign for traditional high-performance computing workloads; (2) codesign of memory/storage systems; (3) codesign of machine learning, neuromorphic, quantum, and other non-von Neumann accelerators; (4) codesign for edge computing and processing at experimental instruments; (5) codesign for security and privacy; (6) hardware design tools and open-source hardware for high-productivity codesign; (7) tools, software stack, and programming languages for high-productivity codesign; and (8) quantitative tools and data collection for modeling and simulation for codesign. The panels identified four Priority Research Directions from these deliberations: (1) breakthrough computing capabilities with targeted heterogeneity and rapid design; (2) software and applications that embrace radical architecture diversity; (3) engineered security and integrity, from transistors to applications; and (4) design with data-rich processes.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1984

Sea Ice, Climate and Fram Strait

When sea ice is formed the albedo of the ocean surface increases from its open water value of about 0.1 to a value as high as 0.8. This albedo change effects the radiation balance and thus has the potential to alter climate. Sea ice also partially seals off the ocean from the atmosphere, reducing the exchange of gases such as carbon dioxide. This is another possible mechanism by which climate might be affected. The Marginal Ice Zone Experiment (MIZEX 83 to 84) is an international, multidisciplinary study of processes controlling the edge of the ice pack in that area including the interactions between sea, air and ice.

Hunkins, K.↗
NASA NTRS1985

A median filter approach for correcting errors in a vector field

Techniques are presented for detecting and correcting errors in a vector field. These methods employ median filters which are frequently used in image processing to enhance edges and remove noise. A detailed example is given for wind field maps produced by a spaceborne scatterometer. The error detection and replacement algorithm was tested with simulation data from the NASA Scatterometer (NSCAT) project.

Schultz, H.↗
NASA NTRS1990

128 layer HYMOSS module fabrication issues

The fabrication of the first Z-technology module with 128 active layers of readout electronic circuitry is being pursued. Several issues which will be investigated regarding the 128-layer module build, such as photolithographic processing at the edge of the module (edge effects) and module buttability, are discussed in this paper. Other topics which are covered apply to future applications of fully populated HYMOSS modules. These topics include possible reductions of thermal mass for quick cool-down time applications and improvements of end-to-end yield for low-cost applications.

Ludwig, David E.↗
NASA NTRS1992

Studies of the charging of a thin dust layer in a plasma

When an infinite plane layer of dust having a number-density profile normal to the plane is exposed to an ambient e(sup -), p(sup +) plasma, one can imagine the features of the charging process near the layer boundary. If the e(sup -), p(sup +) temperatures are equal, and the B field is normal to the dust layer, the controlling factor is the large electron relative to proton speeds. Since the collision rate between plasma particles of number density n and speed v and an uncharged dust grain of radius a is estimated as the product n v pi a(exp 2), electrons dominate the charging process. The outer edge of the layer charges negatively, setting up an electrical potential that inhibits penetration of electrons into the layer and at the same time accelerates protons inward. Interior to the outer negative region then, one would expect many energetic protons compared to a reduced number of electrons from the ambient plasma. Charge imbalances are bound to arise, but the details are not so easy to deduce from simple arguments. These details are the subject of the present study.

Peterson, Lennart R.↗
NASA NTRS2015

3D-Laser-Scanning Technique Applied to Bulk Density Measurements of Apollo Lunar Samples

In order to better interpret gravimetric data from orbiters such as GRAIL and LRO to understand the subsurface composition and structure of the lunar crust, it is import to have a reliable database of the density and porosity of lunar materials. To this end, we have been surveying these physical properties in both lunar meteorites and Apollo lunar samples. To measure porosity, both grain density and bulk density are required. For bulk density, our group has historically utilized sub-mm bead immersion techniques extensively, though several factors have made this technique problematic for our work with Apollo samples. Samples allocated for measurement are often smaller than optimal for the technique, leading to large error bars. Also, for some samples we were required to use pure alumina beads instead of our usual glass beads. The alumina beads were subject to undesirable static effects, producing unreliable results. Other investigators have tested the use of 3d laser scanners on meteorites for measuring bulk volumes. Early work, though promising, was plagued with difficulties including poor response on dark or reflective surfaces, difficulty reproducing sharp edges, and large processing time for producing shape models. Due to progress in technology, however, laser scanners have improved considerably in recent years. We tested this technique on 27 lunar samples in the Apollo collection using a scanner at NASA Johnson Space Center. We found it to be reliable and more precise than beads, with the added benefit that it involves no direct contact with the sample, enabling the study of particularly friable samples for which bead immersion is not possible

Macke, R. J.↗
NASA NTRSDate not supplied

Opposed-flow Spreading Flames: Effect of Sub-atmospheric Pressure on Spread and Burning Rates

Flame spread over solid fuels is a canonical problem in fire science, due to its direct implications on material flammability and importance in fire development. Flames in a microgravity environment can behave very differently than on Earth, posing additional risks for spaceflight life safety. Sub-atmospheric pressures in ground-based experiments have been proposed to approximately replicate the burning behavior of solid fuels in reduced gravity conditions because of similar effects on heat and mass transfer mechanisms from the flame to the solid. In opposed-flow flame spread, the solid fuel is heated by the flame ahead of its leading edge, and this process is strongly affected by the ambient conditions. In this work, we consider flames spreading over flat thin acrylic samples exposed to a forced flow of 20 cm/s, and pressures between 30 and 100 kPa. When radiation losses and chemical kinetic effects are neglected, experimental and theoretical results suggest an independence of the spread rate on pressure. However, the spread rate shows a decreasing trend with lower pressure in the range 30-60 kPa. The mass burning rate, calculated from the samples weight measured before and after the experiments, shows a similar trend. The flame length, on the other hand, shows a non-monotonic behavior, reaching a maximum at 60 kPa. Additionally, gas emissions measured during the experiments are used to estimate the heat release rate of the spreading flames. The comparison of the heat release rate obtained from the measured emissions and the estimated mass burning rates, suggests that chemical kinetics is not driving the decrease in flame spread observed at low pressures, whereas radiation losses could be responsible in analogy to what has been observed in micro and partial gravity studies. These results could provide more information to guide future Earth-based material flammability testing for spacecraft applications.

fire↗
NASA NTRSDate not supplied

Aeroacoustic Computations of a Transonic Truss-Braced Wing Aircraft: Part 2 – Acoustic Signature and Noise Source Identification

High-fidelity, time-dependent simulations of a Boeing-designed, transonic, truss-braced-wing aircraft in cruise (clean) and landing configurations are leveraged to generate synthetic microphone-phased-array data for airframe noise prediction and assessment. These data sets are used to compute source localization (beamform) maps to determine the location and strength of primary and secondary airframe noise sources associated with this unique configuration. The synthetic phased-array implementation mimics the setup of a flight test. As this study is ongoing, preliminary integrated far-field spectra for the cruise configuration obtained at multiple spatial resolutions revealed significant tonal content that lacked convergence with increased resolution. The origin of several of these tones and their unusual convergence behavior was traced to the larger-than-normal trailing-edge thickness of the “as-tested” cruise model being simulated. Reducing the trailing-edge thickness to more realistic values eliminated most of the tones at low to moderate frequencies and improved spectrum convergence significantly. Applying lessons learned from the cruise simulations, several modifications to the geometry of the landing configuration were made and are described in this work. Results from permeable and solid Ffowcs-Williams and Hawkings surfaces at two different spatial resolutions (coarse and medium) are used to illustrate the major noise sources and determine convergence of the CLEAN integrated noise levels for the entire aircraft as well as major subcomponents. We demonstrate that the low-frequency content of the far-field spectrum is dominated by noise generated from the main landing gear, while the medium- and high-frequency content is dominated by the wing-leading-edge Krueger flaps. Since analysis of the acoustic maps for the landing configuration revealed several clusters of multiple sources along the wing leading edge, “high resolution” processing of the array data was used to distinguish more accurately the locations of sources.

Transonic Truss-Braced Wing↗
DOE OSTI2020

Two-dimensional image edge enhancement using two orders of Bragg diffraction

The process of two-dimensional image edge enhancement with an acousto-optical spatial filter using two orders of light diffraction is studied. It is theoretically shown that the diffraction that occurs in a paratellurite crystal on a ‘slow’ acoustic wave propagating orthogonally to the optical axis of the crystal allows enhancing a two-dimensional edge of an image, transferred by optical radiation with a wavelength of 0.63 μm in a wide band of acoustic frequencies 25 – 50 MHz. Enhancement of a two-dimensional image edge at an acoustic frequency of 29 MHz is experimentally demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A 5G Enabled Adaptive Computing Workflow for Greener Power Grid

5G wireless technology can deliver higher data speeds, ultra low latency, more reliability, massive network capacity, increased availability, and a more uniform user experience to users. It brings additional power to help address the challenges brought by renewable integration and decarbonization. In this paper, a 5G enabled adaptive computing workflow tool has been presented that consists of various computing resources, such as 5G equipment, edge computing, cluster, Graphics processing unit (GPU) and cloud computing, with two examples showing technical feasibility for edge-grid-cloud interaction for real-time monitoring, security assessment, and forecasting. Benefiting from the high data transmission speed and massive connection capability of 5G, the workflow shows its potential to seamlessly integrate various applications at distributed and/or centralized locations to build more complex and powerful functions, with better flexibility.

5G technology, computational workflow, edge comput↗
NASA NTRS1992

Color image processing and object tracking workstation

A system is described for automatic and semiautomatic tracking of objects on film or video tape which was developed to meet the needs of the microgravity combustion and fluid science experiments at NASA Lewis. The system consists of individual hardware parts working under computer control to achieve a high degree of automation. The most important hardware parts include 16 mm film projector, a lens system, a video camera, an S-VHS tapedeck, a frame grabber, and some storage and output devices. Both the projector and tapedeck have a computer interface enabling remote control. Tracking software was developed to control the overall operation. In the automatic mode, the main tracking program controls the projector or the tapedeck frame incrementation, grabs a frame, processes it, locates the edge of the objects being tracked, and stores the coordinates in a file. This process is performed repeatedly until the last frame is reached. Three representative applications are described. These applications represent typical uses and include tracking the propagation of a flame front, tracking the movement of a liquid-gas interface with extremely poor visibility, and characterizing a diffusion flame according to color and shape.

Klimek, Robert B.↗