Search NASA⌕ Search

SEARCH · Search NASA

Results for “effort estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Methodology for physics-informed generation of synthetic neutron time-of-flight measurement data

Accurate neutron cross section data are a vital input to the simulation of nuclear systems for a wide range of applications from energy production to national security. The evaluation of experimental data is a key step in producing accurate cross sections. There is a widely recognized lack of reproducibility in the evaluation process due to its artisanal nature and therefore there is a call for improvement within the nuclear data community. This can be realized by automating/standardizing viable parts of the process, namely, parameter estimation by fitting theoretical models to experimental data. This automation effort could greatly benefit from a synthetic data resource. This work leverages problem-specific physics, Monte Carlo sampling, and a general methodology for data synthesis to generate unlimited, labelled experimental cross-section data that is statistically indistinguishable to the observed data. Heuristic and, where applicable, rigorous statistical comparisons to observed data support this claim. The demonstration is based on/limited to transmission measurements at Rensselaer Polytechnic Institute (RPI) and energy-differential cross sections in the resolved resonance region (RRR). An open-source software is published alongside this article that executes the complete methodology to produce high-utility synthetic datasets. The goal of this work is to provide an approach and corresponding tool that will allow the evaluation community to begin exploring more data-driven, ML-based solutions to long-standing challenges in the field.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Imprecise global sensitivity analysis using bayesian multimodel inference and importance sampling

Global Sensitivity Analysis (GSA) aims to understand the relative importance of uncertain input variables to model response. Conventional GSA involves calculating sensitivity (Sobol’) indices for a model with known model parameter distributions. However, model parameters are affected by aleatory and epistemic uncertainty, with the latter often caused by lack of data. In this paper, we propose a new framework to quantify uncertainty in probability model-form and model parameters resulting from small datasets and integrate these uncertainties into Sobol’ index estimates. First, the process establishes, through Bayesian multimodel inference, a set of candidate probability models and their associated probabilities. Imprecise Sobol’ indices are calculated from these probability models using an importance sampling reweighting approach. This results in probabilistic Sobol’ indices, whose distribution characterizes uncertainty in the sensitivity resulting from small dataset size. The imprecise Sobol’ indices thus provide a measure of confidence in the sensitivity estimate and, moreover, can be used to inform data collection efforts targeted to minimize the impact of uncertainties. Through an example studying the parameters of a Timoshenko beam, we show that these probabilistic Sobol’ indices converge to the true/deterministic Sobol’ indices as the dataset size increases and hence, distribution-form uncertainty reduces. The approach is then applied to assess the sensitivity of the out-of-plane properties of an E-glass fiber composite material to its constituent properties. This second example illustrates the approach for an important class of materials with wide-ranging applications when data may be lacking for some input parameters.

42 ENGINEERING↗
DOE OSTI2023

BEYONDPLANCK VIII. Efficient sidelobe convolution and corrections through spin harmonics

We introduce a new formulation of the Conviqt convolution algorithm in terms of spin harmonics, and apply this to the problem of sidelobe correction for BEYONDPLANCK, the first end-to-end Bayesian Gibbs sampling framework for CMB analysis. We compare our implementation to the previous Planck LevelS implementation, and find good agreement between the two codes in terms of accuracy, but with a speed-up reaching a factor of 3–10, depending on the frequency bandlimits, l max and m max . The new algorithm is significantly simpler to implement and maintain, since all low-level calculations are handled through an external spherical harmonic transform library. We find that our mean sidelobe estimates for Planck LFI are in good agreement with previous efforts. Additionally, we present novel sidelobe rms maps that quantify the uncertainty in the sidelobe corrections due to variations in the sky model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Inference of experimental radial impurity transport on Alcator C-Mod: Bayesian parameter estimation and model selection

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. Here, we find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Laser Confocal Microscopy Uncertainty Quantification Study

At Los Alamos National Laboratory (LANL), the Storage Safety and Engineering (SSE) team completes annual surveillance on a subset of in-use interim nuclear material storage containers in fulfilment of requirements outlined in DOE Manual M 441.1-1. The containers are selected through several methods, such as subject matter expert judgement, random selection, and trending items. Following these selections, the SSE team has the capacity to complete surveillance on 15-20 containers each fiscal year, composed of a combination of SAVY-4000 and Hagan storage containers. Through previous work, the stainless-steel components of the containers have been identified as life limiting components, with an emphasis on the thin-walled bodies. The team is focused on understanding the extent of general and pitting corrosion, due to observations of extensive corrosion from stored contents and bag-out-bag degradation. Quantifying corrosion effects on the thin-walled stainless steel container bodies, and understanding potential impacts to the respective design release rates and design qualification release rates is paramount to the team. To date, destructive examination (DE) has proven to be the most insightful method for developing an understanding on the extent of corrosion on used containers. To standardize this process, the SSE team developed a destructive examination guide for analyzing stainless steel components of the containers. Corroded containers of interest are identified during surveillance activities and set aside for sectioning and characterization. Following sectioning, a major step in the DE workflow is the utilization of laser confocal microscopy for scanning corroded samples of interest and extracting data on pits, such as count, depth, and equivalent diameter. Adhering to the techniques outlined in the DE guide, analysis has been completed on two Hagans and one SAVY-4000 container, with the maximum pit depth recorded as 139.1 ± 22.82 μm on a 17.5 year old Hagan. The findings from the completed destructive examinations will be utilized to support lifetime extension efforts of the SAVY-4000 as the team can better estimate corrosion rates and effects over time based on stored contents and age. Due to the implications of observing extreme pit depths that approach the nominal container body thickness of .0299 inches (0.759 mm) or minimum container thickness of 0.236” (0.6 mm), high confidence in the LCM measurements is desired. Through testing outlined in, it was concluded that the total error ascribed to the 20x objective when conducting large image mapping on the Keyence VK-X3050 laser confocal microscope (LCM) relative to a 50x objective (reference) is 16.4% (± 8.73%). For shallow features on the order of pristine SAVY surface defects (i.e. 5 μm), this uncertainty is appropriate. However, this conservative estimate of total error poses a fundamental concern for pit depths that approach the thickness of the measured samples. That is, with the measurement uncertainty currently employed on all measurements, the LCM would be unable to resolve if a pit with a depth of 515 μm is through wall. Standard step height samples were procured and used in the present study to assess the resolution and repeatability of height measurements. Understanding the resolution and repeatability of height measurements was the first focus of the team as it relates directly to pit depth, which is of primary concern. Calibration gratings were procured to evaluate the resolution and repeatability of measurements in the X and Y axes of the LCM stage. The results of the depth uncertainty study were conducted first and presented in the subsequent sections. The planar uncertainty study is appended to the depth study with conclusions from both summarized at the end of the report.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Review of Intense Electromagnetic Fields in Heavy-Ion Collisions: Theoretical Predictions and Experimental Results

In heavy-ion collisions at relativistic energies, the incident nuclei travel at nearly the speed of light. These collisions deposit kinetic energy into the overlap region and create a high-temperature environment where hadrons “melt” into deconfined quarks and gluons. The spectator nucleons, which do not undergo scatterings, generate an ultraintense electromagnetic field—on the order of 10 18 G at the Relativistic Heavy Ion Collider and 10 19 G at the Large Hadron Collider. These powerful electromagnetic fields have a substantial impact on the produced particles, not only complicating the study of particle interactions but also inducing novel physical phenomena. To explore the nature of these fields and their interactions with deconfined quarks, we provide a detailed overview, encompassing theoretical estimations of their generation and evolution, as well as experimental efforts to detect them. We also provide physical interpretations of the discovered results and discuss potential directions for future investigations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection.

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Structure-aware Initialization via Numerical Continuation and Informed Priors

Scientific machine learning (SciML) often operates in ill-conditioned, weakly identifiable regimes due to limited data or indirect observations. In such settings, optimization and inference are highly sensitive to the starting point, making initialization--often under-reported--a consequential degree of freedom. Random initialization is not a neutral default as it induces an implicit prior over candidate solutions and can systematically bias the result, producing large run-to-run variability. Here, we formalize this view by treating initialization as a hidden confounder in SciML and develop a unifying theory for structure-aware initialization via numerical continuation, constructing warm starts from related problem instances. Across representative tasks, including physics-informed neural networks, maximum likelihood estimation, and variational inference, warm starts have been shown to consistently reduce optimization effort and improve reliability.

Data integrity↗
DOE OSTI2022

Host-region parameters for an adjustable model for crustal earthquakes to facilitate the implementation of the backbone approach to building ground-motion logic trees in probabilistic seismic hazard analysis

The backbone approach to constructing a ground-motion logic tree for probabilistic seismic hazard analysis (PSHA) can address shortcomings in the traditional approach of populating the branches with multiple existing, or potentially modified, ground-motion models (GMMs) by rendering more transparent the relationship between branch weights and the resulting distribution of predicted accelerations. To capture epistemic uncertainty in a tractable manner, there are benefits in building the logic tree through the application of successive adjustments for differences in source, path, and site characteristics between the host region of the selected backbone GMM and the target region for which the PSHA is being conducted. The implementation of this approach is facilitated by selecting a backbone GMM that is amenable to such host-to-target adjustments for individual source, path, and site characteristics. The NGA-West2 GMM of Chiou and Youngs (CY14) has been identified as a highly adaptable model for crustal seismicity that is well suited to such adjustments. Rather than using generic source, path, and site characteristics assumed appropriate for the host region, the final suite of adjusted GMMs for the target region will be better constrained if the host-region parameters are defined specifically on the basis of their compatibility with the CY14 backbone GMM. To this end, making use of a recently developed crustal shear-wave velocity profile consistent with CY14, we present an inversion of the model to estimate the key source and path parameters, namely the stress parameter and the anelastic attenuation. With these outputs, the effort in constructing a ground-motion logic tree for any PSHA dealing with crustal seismicity can be focused primarily on the estimation of the target-region characteristics and their associated uncertainties. The inversion procedure can also be adapted for any application in which different constraints might be relevant.

Stafford, Peter J.↗
DOE OSTI2021

Effect of Image Classification Accuracy on Dasymetric Population Estimation

Dasymetric mapping involves the disaggregation of count data, usually relating to population/demographics, from census enumeration areas to smaller target zones with the aid of an ancillary layer related to population density. The ancillary layer is often a binary classification such as developed versus undeveloped, building versus non-building, and residential versus non-residential, in which one class is treated as populated and the other as unpopulated. While dasymetric mapping relies heavily on ancillary data, little research has been done to address the error in ancillary data and its effects on dasymetric mapping accuracy. This chapter reports our research effort to investigate the effect of image classification accuracy on dasymetric population estimates by developing a binomial classification of buildings from high-resolution remote sensor imagery. The classifier was systematically and iteratively manipulated to generate a series of outputs with variegated accuracy characteristics. Lastly, we generated a corresponding series of population estimates based on the mapped building area from each iteration to investigate the relationship between the accuracy of classification and population estimation.

McKee, Jacob↗
DOE OSTI2025

Evaluation of common trap types for capturing wild pigs

Abstract Wild pigs ( Sus scrofa ) are one of the most ecologically harmful invasive vertebrates globally. Due to their negative impacts, wild pig populations are managed via trapping, yet studies investigating various trap designs have been limited in duration, location, and number of trappers. Using data from professional trappers across the southeastern U.S., we evaluated the performance of 3 wild pig trap types (corral, drop, passive net), and the effect of forage season (barren, green‐up, masting) on trapping success. Specifically, we compared trap effectiveness (estimated proportion of targeted wild pigs caught per capture event), trap night effort (number of days to first catch), and the amount of bait and time used per individual take over the lifetime of each trap location across the 3 trap types and forage seasons. Across >850 capture events by 31 trappers, all 3 trap types evaluated were effective at capturing entire social groups of wild pigs. Few differences were observed among trap types, although drop traps in masting season captured a greater estimated proportion of wild pigs per capture event compared to other trap type‐season combinations. Our data also revealed that passive net traps required slightly more bait/wild pig captured than drop traps but there was no difference in the time/wild pig captured among traps. Our findings demonstrate that when operated by wildlife professionals, multiple designs of wild pig traps can be effective at removing targeted groups of wild pigs. Further, our results offer insights regarding the performance of wild pig trap types across seasons that can be used to inform wild pig trapping programs.

Taylor, Charles R. [Warnell School of Forestry and↗
DOE OSTI2026

wa-hls4ml: A Benchmark and Surrogate Models for hls4ml Resource and Latency Estimation

As machine learning (ML) is increasingly implemented in hardware to address real-time challenges in scientific applications, the development of advanced toolchains has significantly reduced the time required to iterate on various designs. These advancements have solved major obstacles, but also exposed new challenges. For example, processes that were not previously considered bottlenecks, such as hardware synthesis, are becoming limiting factors in the rapid iteration of designs. To mitigate these emerging constraints, multiple efforts have been undertaken to develop an ML-based surrogate model that estimates resource usage of ML accelerator architectures. We introduce wa-hls4ml, a benchmark for ML accelerator resource and latency estimation, and its corresponding initial dataset of over 680,000 fully connected and convolutional neural networks, all synthesized using hls4ml and targeting Xilinx FPGAs. The benchmark evaluates the performance of resource and latency predictors against several common ML model architectures, primarily originating from scientific domains, as exemplar models, and the average performance across a subset of the dataset. Additionally, we introduce GNN- and transformer-based surrogate models that predict latency and resources for ML accelerators. We present the architecture and performance of the models and find that the models generally predict latency and resources for the 75% percentile within several percent of the synthesized resources on the synthetic test dataset.

Hawks, Benjamin [Fermilab] (ORCID:0000000157000288↗
DOE OSTI2024

Multi-phenomenology Yield Characterization

This report serves as the first delivery of a four-year applied science effort to transform and advance the error bounds for the yield estimate of an explosion. Each year’s delivery will be in this form, culminating in the submission of this work for peer review to a scientific journal. Importantly, the yearly progress reports can then also be viewed as expanding drafts working towards a formal journal article submission. For the first tranche of funding, we collaborated with Air Force Technical Applications Center (AFTAC) scientists to identify unclassified real-world data that demonstrate and validate our advanced error propagation methods. Collaboration includes visits to AFTAC and telecons. For this development, we illustrate the fusion of seismic, acoustic, optical, and surface effect signatures from an explosion. The mathematics and code being adapted to this specific application (Williams et al., 2021) involves physics models of multiple sensor signatures. We have also identified related physics models and have integrated them into code. Current methods of underground explosion yield estimation for the Threshold Test Ban Treaty (TTBT) have served the US treaty monitoring mission well for decades. A research objective of the Defense Nuclear Nonproliferation Research and Development (DNN R&D) office of the National Nuclear Security Administration (NNSA) has always been to provide new technical capabilities for monitoring lower thresholds. The general model and error propagation code to be developed in this project is based on significant advances in error modeling and propagation needed to analyze data at lower detection thresholds. The second tranche of funding for this project began on May 1, 2022, and planned work for the second tranche includes: i) completing the integration of physical model code into the general error model framework; this code accommodates a wide range of linear/nonlinear source models, fixed/ random effects, and frequentist/Bayesian analyses (the purpose of which is not to dictate to users how to analyze data, but instead to allow users the maximum flexibility in their work); ii) illustrative application of code to identified data, and; iii) initial planning with AFTAC researchers on delivery of code to the Common Development Environment at AFTAC, and continued writing of the planned final journal article submission (year two of this progress report), with particular emphasis on descriptions of data identified for this effort.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Literature Review of Advanced Reactor Cost Estimates

This report provides a comprehensive review of existing literature on advanced reactor cost estimations in the form of a ‘meta-study’. Over 30 references were evaluated and considered as part of this effort. The information is then distilled into different tiers, each with varying levels of detail and granularity. The recommendations consist of low/medium/high estimates for capital and operating costs that can be adjusted using various correction factors (based on learning, numbers of plants per site, etc.). In addition, reference breakdown in costs based on a code of account structure is provided for the main four types of advanced reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Historically inconsistent productivity and respiration fluxes in the global terrestrial carbon cycle

The terrestrial carbon cycle is a major source of uncertainty in climate projections. Its dominant fluxes, gross primary productivity (GPP), and respiration (in particular soil respiration, R S ), are typically estimated from independent satellite-driven models and upscaled in situ measurements, respectively. We combine carbon-cycle flux estimates and partitioning coefficients to show that historical estimates of global GPP and R S are irreconcilable. When we estimate GPP based on R S measurements and some assumptions about R S :GPP ratios, we found the resulted global GPP values (bootstrap mean ${149}^{+29}_{-23}$ Pg C yr ⁻1 ) are significantly higher than most GPP estimates reported in the literature (${113}^{+18}_{-18}$ Pg C yr ⁻1 ). Similarly, historical GPP estimates imply a soil respiration flux (Rs GPP , bootstrap mean of ${68}^{+10}_{-8}$ Pg C yr ⁻1 ) statistically inconsistent with most published R S values (${87}^{+9}_{-8}$ Pg C yr ⁻1 ), although recent, higher, GPP estimates are narrowing this gap. Furthermore, global R S :GPP ratios are inconsistent with spatial averages of this ratio calculated from individual sites as well as CMIP6 model results. This discrepancy has implications for our understanding of carbon turnover times and the terrestrial sensitivity to climate change. Future efforts should reconcile the discrepancies associated with calculations for GPP and Rs to improve estimates of the global carbon budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Survival of Immature Gopher Tortoises Recruited into a Translocated Population

Population manipulations such as translocation and head-starting are increasingly used as recovery tools for chelonians. However, evaluating success of individual projects can require decades of monitoring to detect population trends in these long-lived species. Furthermore, there are often few benchmarks from stable, unmanipulated populations against which to compare demographic rates, particularly for the immature stages. Here, we used 8 years of mark-recapture data to estimate apparent survival of immature gopher tortoises recruited into an introduced population of gopher tortoises (Gopherus polyphemus) first established on St. Catherines Island, Georgia, USA in 1987. During 2006 29 -2013, we conducted targeted trapping of immature gopher tortoises and compared survival of the hatchling, juvenile and subadult stages among treatments: 1) individuals released shortly after hatching from eggs obtained from gravid female founders (‘direct releases’); 2) individuals reared in captivity for 6-9 months following hatching (‘head-starts’); and 3) individuals first encountered as free-ranging, wild-recruited offspring (‘wild recruits’). Among the candidate models we examined, the best fit model included additive effects of tortoise stage and treatment, however, overlapping 95% credible intervals among treatments (CI) suggested that survival did not vary significantly among treatments. Annual apparent survival increased over the immature period, highlighting the importance of calculating separate estimates for the different immature stages. Across all treatments, the additive model estimated annual apparent survival probability to be 0.37 (CI: 0.25 40 – 0.48) for hatchlings, 0.71 (CI: 0.61 – 0.81) for juveniles, and 0.83 (CI: 0.74 – 0.94) for subadults. Our study, in combination with previous monitoring efforts at St. Catherines Island, provides strong evidence that the translocation and subsequent population augmentation efforts have been successful in establishing a robust population of gopher tortoises. Additionally, our results provide estimates of demographic rates for life stages that are poorly understood but critical to understanding population dynamics of this imperiled species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Machine learning enabled quantification of the hydrogen bonds inside the polyelectrolyte brush layer probed using all-atom molecular dynamics simulations

The configuration of densely grafted charged polyelectrolyte (PE) brushes is strongly dictated by the properties and behavior of the counterions that screen the PE brush charges and the solvent molecules (typically water) that solvate the brush molecules and these screening counterions. Only recently, efforts have been made to study the PE brushes atomistically, thereby shedding light on the properties of brush-supported ions and water molecules. However, even for such efforts, there are limitations associated with using a generic definition to estimate certain properties of water and ions inside the brush layer. For example, water–water hydrogen bonds (HBs) will behave differently for locations outside and inside the brush layer, given the fact that the densely closely grafted PE brush molecules create a soft nanoconfinement where the water connectivity becomes highly disrupted: therefore, using the same definition to quantify the HBs inside and outside the brush layer will be unwise. In this paper, we address this limitation by employing an unsupervised machine learning (ML) approach to predict the water–water hydrogen bonding inside a cationic PE brush layer modeled using all-atom molecular dynamics (MD) simulations. Here, the ML method, which relies on a clustering approach and uses the equilibrium coordinates of the water molecules (obtained from the all-atom MD simulations) as the input, is capable of identifying the structural modification of water–water HBs (revealed through appropriate clustering of the data) inside the PE brush layer induced soft nanoconfinement. Such capabilities would not have been possible by using a generic definition of the HBs. Our calculations lead to four key findings: (1) the clusters formed inside and outside the brush layer are structurally similar; (2) the margin of the cluster is shorter inside the PE brush layer confirming the possible disruption of the HBs inside the PE brush layer; (3) the average “hydrogen–acceptor-oxygen–donor-oxygen” angle that defines the HB is reduced for the HBs formed inside the brush layer; (4) the use of the generic definition (definition usable for characterizing the HBs in brush-free bulk) leads to an overprediction of the number of HBs formed inside the PE brush layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measuring stellar populations, dust attenuation and ionized gas at kpc scales in 10010 nearby galaxies using the integral field spectroscopy from MaNGA

As one of the three major experiments of the fourth-generation Sloan Digital Sky Survey (SDSS-IV), the Mapping Nearby Galaxies at Apatch Point Observatory (MaNGA) survey has obtained high-quality integral field spectroscopy (IFS) with a resolution of 1–2 kpc for ∼ 10 4 galaxies in the local universe during its six-year operation from July 2014 through August 2020. It is crucial to reliably measure the physical properties of the different components in each spectrum before one can use the data for any scientific study. In the past years we have made lots of efforts to develop a novel technique of full spectral fitting, which estimates a model-independent dust attenuation curve from each spectrum, thus allowing us to break the degeneracy between dust attenuation and stellar population properties when fitting the spectrum with stellar population synthesis models. We have applied our technique to the final data release of MaNGA, and obtained measurements of stellar population properties and emission line parameters, as well as the kinematics and dust attenuation of both stellar and ionized gas components. In this paper we describe our technique and the content and format of our data products. The whole dataset is publicly available in Science Data Bank with the link https://doi.org/10.57760/sciencedb.j00113.00088 .

Physics↗