Search NASA⌕ Search

SEARCH · Search NASA

Results for “elasticity coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effects of Encapsulant Properties on the Thermo-Mechanical Reliability of Double-Side Cooled Power Modules for Traction Inverters

Double-side cooled power modules are being developed for next-generation traction inverters due to their better heat extraction, lower profile, and lower parasitic inductances. However, due to their rigid structure, they cause reliability concerns arising from high thermo-mechanical stresses at the interconnection joints in the module. In this work, a materials-based approach using rigid encapsulants is presented for reducing thermo-mechanical fatigue. Finite-element thermo- mechanical simulations were performed to examine the effects of the elastic modulus and coefficient of thermal expansion of epoxy- based encapsulants on the bond deformation inside a double-side cooled power module. It was found that a rigid encapsulant with a high modulus of 6.0 GPa or above and a coefficient of thermal expansion around 20 ppm/oC would improve the thermo- mechanical reliability of double-side cooled power modules by decreasing the permanent bond deformation inside the modules by 50-60%.

ADVANCED PROPULSION SYSTEMS↗

Effects of water-vapor on friction and deformation of polymeric magnetic media in contact with a ceramic oxide

The effects of humidity (water-vapor) in nitrogen on the friction and deformation behavior of magnetic tape in contact with a Ni-Zn ferrite spherical pin were studied. The coefficient of friction is markedly dependent on the ambient relative humidity. In elastic contacts the coefficient of friction increased linearly with increasing humidity; it decreased linearly when humidity was lowered. This effect is the result of changes in the chemistry and interaction of tape materials such as degradation of the lubricant. In plastic contacts there was no effect of humidity on friction below 40 percent relative humidity. There is no effect on friction associated with the breakthrough of the adsorbed water-vapor film at the interface of the tape and Ni-Zn ferrite. The coefficient of friction, however, increased rapidly with increasing relative humidity above 40 percent in plastic contacts.

Miyoshi, K.↗

New calculation method of neutron kerma coefficients for carbon and oxygen below 30 MeV

On the basis of the statistical theory of a neutron-induced light nucleus reaction, a new kerma coefficient calculation formula, expressed as k{sub {phi}}=NijkE{sub ijk}(E{sub n}){sigma}{sub ijk}(E{sub n}), is developed in this paper. In an analysis of the n+{sup 12}C and n+{sup 16}O reactions below 30 MeV, the average energies E{sub ijk} of emitted particles of all kinds in the laboratory frame are derived in detail for different channels, allowing an exact energy balance. The optical model parameters of neutron and charged particles, which had reproduced very well the outgoing neutron double-differential cross sections in our early works, are used to obtain the cross sections {sigma}{sub ijk}. The calculated partial, elastic recoil, and total kerma coefficients for carbon and oxygen are consistent with existing experimental kerma coefficient data. The elastic cross sections and the first Legendre coefficients of elastic angular distribution derived from EBDF/B-VIIb3 are used in this paper to improve significantly the elastic recoil and total kerma coefficients.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High Spectral Resolution Lidar and MPLNET Micro Pulse Lidar Aerosol Optical Property Retrieval Intercomparison During the 2012 7-SEAS Field Campaign at Singapore

From August 2012 to February 2013 a High Resolution Spectral Lidar (HSRL; 532 nm) was deployed at that National University of Singapore near a NASA Micro Pulse Lidar NETwork (MPLNET; 527 nm) site. A primary objective of the MPLNET lidar project is the production and dissemination of reliable Level 1 measurements and Level 2 retrieval products. This paper characterizes and quantifies error in Level 2 aerosol optical property retrievals conducted through inversion techniques that derive backscattering and extinction coefficients from MPLNET elastic single-wavelength datasets. MPLNET Level 2 retrievals for aerosol optical depth and extinction/backscatter coefficient profiles are compared with corresponding HSRL datasets, for which the instrument collects direct measurements of each using a unique optical configuration that segregates aerosol and cloud backscattered signal from molecular signal. The intercomparison is performed, and error matrices reported, for lower (0-5km) and the upper (>5km) troposphere, respectively, to distinguish uncertainties observed within and above the MPLNET instrument optical overlap regime.

MPL↗

The collisional depolarization of OH(A {sup 2}Σ{sup +}) and NO(A {sup 2}Σ{sup +}) with Kr

Quantum beat spectroscopy has been used to measure rate coefficients at 300 K for collisional depolarization for NO(A {sup 2}Σ{sup +}) and OH(A {sup 2}Σ{sup +}) with krypton. Elastic depolarization rate coefficients have also been determined for OH(A) + Kr, and shown to make a much more significant contribution to the total depolarization rate than for NO(A) + Kr. While the experimental data for NO(A) + Kr are in excellent agreement with single surface quasiclassical trajectory (QCT) calculations carried out on the upper 2A{sup ′} potential energy surface, the equivalent QCT and quantum mechanical calculations cannot account for the experimental results for OH(A) + Kr collisions, particularly at low N. This disagreement is due to the presence of competing electronic quenching at low N, which requires a multi-surface, non-adiabatic treatment. Somewhat improved agreement with experiment is obtained by means of trajectory surface hopping calculations that include non-adiabatic coupling between the ground 1A{sup ′} and excited 2A{sup ′} states of OH(X/A) + Kr, although the theoretical depolarization cross sections still significantly overestimate those obtained experimentally.

74 ATOMIC AND MOLECULAR PHYSICS↗

A geometrically nonlinear analysis of interlaminar stresses in unsymmetrically laminated plates subjected to uniform thermal loading

An analytical study of interlaminar stresses in unsymmetrically laminated plates is presented. The study examines the linear elastic, large deflection response of square laminated composite plates subjected to uniform thermal loading. Both cross-ply and angle-ply, symmetric and unsymmetric, laminates are examined to evaluate the effects of mismatch between adjacent layers in elastic constants and coefficients of thermal expansion. A geometrically nonlinear kinematic description is used to predict the large out-of-plane (transverse) deflections. The nonlinear, three-dimensional boundary value problems are formulated from elasticity theory and approximate solutions are determined using the finite element method. A global/local analysis procedure is used to obtain improved free edge stress predictions. For the laminates and loading conditions considered, the results indicate that the out-of-plane deflections of the unsymmetric laminates reduce interlaminar shear stresses. These deflections also reduce interlaminar normal stresses in some laminates and increase these stresses for others. The results indicate that as the out-of-plane deflections become large, the differences in interlaminar stress predictions between linear and nonlinear theory can become quite large.

Norwood, D. S.↗

Physical test of a particle simulation model in a sheared granular system

We report a detailed comparison of a slow gravity driven sheared granular flow with a computational model performed with the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS). To our knowledge, this is the first thorough test of the LAMMPS model with a laboratory granular flow. In the experiments, grains flow inside a silo with a rectangular cross-section, and are sheared by a rough boundary on one side and smooth boundaries on the other sides. Individual grain position and motion are measured using a particle index matching imaging technique where a fluorescent dye is added to the interstitial liquid which has the same refractive index as the glass beads. The boundary imposes a packing order, and the grains are observed to flow in layers which get progressively more disordered with distance from the walls. The computations use a Cundall--Strack contact model between the grains, using contact parameters that have been used in many other previous studies, and ignore the hydrodynamic effects of the interstitial liquid. Computations are performed to understand the effect of particle coefficient of friction, elasticity, contact model, and polydispersity on mean flow properties. After appropriate scaling, we find that the mean velocity of the grains and the number density as a function of flow cross-section observed in the experiments and the simulations are in excellent agreement. The mean flow profile is observed to be unchanged over a broad range of coefficient of friction, except near the smooth wall. We show that the flow profile is not sensitive to atleast 10\percent polydispersity in particle size. Because the grain elasticity used is smaller in the computations as compared with glass grains, wave-like features can be noted over short time scales in the mean velocity and the velocity auto-correlations measured in the simulations. These wave features occur over an intermediate timescale larger than the particle interaction but smaller than the timescale of the macroscopic flow features. The wave features become more prominent as grain elasticity is further reduced. We then perform a detailed comparison of the particle fluctuation properties as measured by the displacement probability distribution function and the mean square displacement. Excellent agreement is observed over a time interval over which particles can be tracked effectively in the experiments. Using the longer tracking intervals possible in the simulations, we find that the diffusion inthe layers is greater in the flow direction, than in the perpendicular direction. Further signatures of confinement and hopping between layers is observed. All in all, our study provides strong support for the LAMMPS model of granular flow, and further supports the hypothesis that the interstitial liquid has negligible effects on granular fluctuations provided the flow is slow.

36 MATERIALS SCIENCE↗

Modeling of the Effective Elastic and Thermal Properties of Glass-Ceramic Solid Oxide Fuel Cell Seal Materials

In this study, the effective elastic properties and coefficients of thermal expansion (CTE) of a glass-ceramic were predicted using homogenization techniques. Using G18, a glass-ceramic solid oxide fuel cell (SOFC) sealant as an initial reference material, the effectiveness of different homogenization models was investigated for a two-phase glass-ceramic. The elastic properties and CTEs of the G18 amorphous phase are currently unknown. Thus, estimated values were used as an input to the models. The predictive model offers accurate macroscopic values on both the elastic modulus and the CTE of glass-ceramic materials, providing the estimated amorphous values are reasonable. This model can be used in designing glass-ceramic SOFC seal materials for its specific operation conditions.

30 DIRECT ENERGY CONVERSION↗

Non-adiabatic quantum interference and complex formation in ultracold collisions of Rb with KRb

Ultracold elastic collisions of 87 Rb with 40 K 87 Rb in its ground vibrational and rotational state are investigated using a first principles based theoretical methodology. Full-dimensional ab initio computed potential energy surfaces are reported that include the two lowest-lying electronic states, their conical intersection, non-adiabatic couplings and an accurate long-range behavior. A numerically exact time-independent quantum dynamics method in hyperspherical coordinates is used to compute the elastic scattering cross sections, rate coefficients and collision lifetime spectrum. The quantum scattering calculations include all degrees of freedom and treat both electronic states and their non-adiabatic couplings using a two-state diabatic representation. The theoretically computed elastic rate coefficient is in good agreement with the recently reported experimental value. Significant non-adiabatic quantum interference effects are shown to originate from the unique properties of ultracold collisions and the geometric phase associated with the conical intersection. A high-resolution collision energy grid is used to investigate the origin of the experimentally reported long-lived 3-body collision complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatial description of the particle production region in elastic and quasi-elastic processes on the SO{sub μ} (2.1) group

The group-theoretical generalization of the impact parameter for elastic A + B → A + B processes is considered and analyzed in the work. The generalized impact parameter is identified with the vector of the closest approach of two particles. It is shown that after the procedure of standard quantization the components of the impact parameter’s vector, together with the components of the relative orbital’s angular momentum form SO (3.1) algebra from which we identify the SO (2.1) subalgebra. The spectrum of the Casimir operator for this subalgebra defines the allowed values of the impact parameter squared. The expansion coefficients of the elastic amplitude as a function on the SO (2.1) group define the profile function; an analogue of the partial wave on the O (3) group. The expansion itself is the generalization of the eikonal representation of the amplitude and is valid in the entire range of scattering angles. It also correctly describes the region of small impact parameters. The unitarity equation for the amplitude is solved and, as a consequence, the algebraic equation for the profile function, local in the impact parameter, is obtained. The simplest phenomenological models for cross sections (total, elastic, and inelastic) are analyzed in the framework of the solutions obtained. The next step in the development of the group-theoretical approach proposed in the work is associated with construction of a complete orthonormal basis in the one-particle Fock space where the particle is characterized by a particular energy and a particular value of its “impact parameter” relative to a point “O”. This point is related to the target particle’s coordinate (in the laboratory reference frame) or the beam’s collision point (center-of-mass system). This formalism allows for obtaining the relation between the escape parameter’s distribution function of particle C in the A + B → C + D process and the corresponding production amplitude of this particle in an angular interval. The resulting distribution function provides important physical information on the spatial structure of the production region of particle C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of pseudo-static limit equilibrium and elastic wave equation analyses of dynamic earth pressures on retaining structures

The seismic earth pressure increment is typically computed using either pseudo-static limit equilibrium methods or elastic wave equation analyses of the interaction between a retaining structure and backfill material, yet current interpretations of the two methods provide conflicting recommendations. The focus of this study is to compare the seismic earth pressure increment computed using the two methods. This approach is demonstrated by subjecting an initially uniform prototype site selected from standard site classifications to harmonic excitation in one-dimensional equivalent linear analyses. Then, the seismic earth pressure resultant for a rigid wall is computed using the two methods. The limit equilibrium approach utilizes the acceleration records from the equivalent linear analysis to compute a seismic coefficient, whereas the elastic solution incorporates the reduced modulus and damping from the final iteration of the analysis, as well as the relative displacement records. The results presented herein corroborate the findings of recent centrifuge experiments and associated analyses.

58 GEOSCIENCES↗

Free vibration analysis of a multiple rotating nano-beams system based on the Eringen nonlocal elasticity theory

The free vibration analysis of a multiple rotating nanobeams' system applying the nonlocal Eringen elasticity theory is presented. Multiple nanobeams' systems are of great importance in nano-optomechanical applications. At nanoscale, the nonlocal effects become non-negligible. According to the nonlocal Euler-Bernoulli beam theory, the governing partial differential equations are derived by incorporating the nonlocal scale effects. Assuming a structure of n parallel nanobeams, the vibration of the system is described by a coupled set of n partial differential equations. The method involves a change of variables to uncouple the equations and the differential transform method as an efficient mathematical technique to solve the nonlocal governing differential equations. Then a number of parametric studies are conducted to assess the effect of the nonlocal scaling parameter, rotational speed, boundary conditions, hub radius, and the stiffness coefficients of the elastic interlayer media on the vibration behavior of the coupled rotating multiple-carbon-nanotube-beam system. It is revealed that the bending vibration of the system is significantly influenced by the rotational speed, elastic mediums, and the nonlocal scaling parameters. This model is validated by comparing the results with those available in the literature. The natural frequencies are in a reasonably good agreement with the reported results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Heavy Flavor Mesons and Flavor-Tagged Jets with the CMS Detector

The goal of this research program is to implement heavy flavor meson triggers in heavy-ion collisions for the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) at CERN, including algorithm design, timing studies, offline validation, and online performance monitoring. The physics analyses which can be achieved by data from these new triggers is to address one of the most important questions in the field: parton flavor dependence of jet-quenching for the understanding of the transport properties of the Quark-Gluon Plasma. This program will allow CMS to collect the highest statistics heavy flavor meson and jet data ever recorded in heavy-ion colliders. The program includes two objectives: (1) Build and maintain the heavy flavor meson and jet triggers for heavy-ion collisions and deploy the trigger algorithms for 2015-2018 PbPb and pPb run at the LHC; (2) Perform heavy flavor meson and jet physics analyses, which can be used to study the parton flavor dependence of jet quenching, to extract the elastic energy loss coefficient of the QGP, and to test whether massive quarks also participate in collective expansion dynamics in heavy-ion collisions. With the heavy flavor physics trigger developed in this project, a competitive heavy flavor physics program in heavy-ion collisions has been established in CMS. This program allows studies of the fully reconstructed and flavor identified charm, beauty, and exotic hadrons that cover the widest transverse momentum range. The novel measurements supported by the award provide new constraints on the size of the flavor dependence of parton energy loss, the value of the in-medium charm quark diffusion coefficient, the mechanism of charm and beauty quark hadronization, and provide new insights to the nature of the X(3872) hadron.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High Throughput Computational Framework of Materials Properties for Extreme Environments

This project aims to establish a framework capable of efficiently predicting the properties of structural materials for service in harsh environments over a wide range of temperatures and over long periods of time. The approach is to develop and integrate high throughput first-principles calculations in combination with machine learning (ML) methods, perform high throughput CALPHAD (calculations of phase diagrams) modeling, and carry out finite element method (FEM) simulations. Relevant to high temperature service in fossil power system, nickel-based superalloys such as Inconel 740 and Haynes 282 as well as the associated (Ni-Cr-Co)-Al-C-Fe-Mn-Mo-Nb-Si-Ti system, were investigated. The present framework was built on the concept of phase-based property data, in which properties of individual phases are modeled as a function of internal and external independent variables. This project established an open-source infrastructure with the following capabilities: (1) High throughput implementation of first-principles calculations at finite temperatures and variable compositions using both accurate phonon calculations and the efficient Debye model for thermodynamic properties, elastic constants, diffusion coefficients, vacancy formation, stacking and twin faults, and dislocation mobility; i.e., using the developed code DFTTK; (2) Machine learning capabilities to predict the above properties so that the number of first-principles calculations can be significantly reduced; e.g., using the developed code SIPFENN; (3) High throughput CALPHAD modeling of the above properties as a function of temperature and composition using our unique capability based on ESPEI and PyCalphad; (4) New capabilities to predict the stress-strain behavior of individual phases; and (5) New models for tensile strength prediction in common FEM software with the crystal plasticity finite element simulations (CPFEM).

, Ni-based superalloys↗

Combined Effects of Temperature and Irradiation on Concrete Damage

Aggregate radiation-induced volumetric expansion (RIVE) is a predominant mechanism in the formation of mechanical damage in the hardened cement paste (hcp) of irradiated concrete under fast-neutron flux (Giorla et al. 2015). Among the operating conditions difference between test reactors and light water reactors (LWRs), the difference of irradiation flux and temperature is significant. While a temperature increase is quite generally associated with a direct, or indirect (e.g., by dehydration) loss of mechanical properties (Maruyama et al. 2014), we found that it causes a partial annealing of irradiation amorphization of α-quartz, hence, reducing RIVE rate. Based on data collected by Bykov et al. (1981), an incremental RIVE model coupling neutron fluence and temperature is developed. The elastic properties and coefficient of thermal expansion (CTE) of irradiated polycrystalline quartz are interpreted through analytical homogenization of experimental data on irradiated α-quartz published by Mayer and Lecomte (1960). Moreover, the proposed model, implemented in the meso-scale simulation code AMIE, is compared to experimental data obtained on ordinary concrete made of quartz/quartzite aggregate (Dubrovskii et al. 1967). Substantial discrepancy, in terms of damage and volumetric expansion developments, is found when comparing irradiation scenarios assuming constant flux and temperature, as opposed to more realistic test reactor operation conditions.

36 MATERIALS SCIENCE↗

NASA technology utilization survey on composite materials

NASA and NASA-funded contractor contributions to the field of composite materials are surveyed. Existing and potential non-aerospace applications of the newer composite materials are emphasized. Economic factors for selection of a composite for a particular application are weight savings, performance (high strength, high elastic modulus, low coefficient of expansion, heat resistance, corrosion resistance,), longer service life, and reduced maintenance. Applications for composites in agriculture, chemical and petrochemical industries, construction, consumer goods, machinery, power generation and distribution, transportation, biomedicine, and safety are presented. With the continuing trend toward further cost reductions, composites warrant consideration in a wide range of non-aerospace applications. Composite materials discussed include filamentary reinforced materials, laminates, multiphase alloys, solid multiphase lubricants, and multiphase ceramics. New processes developed to aid in fabrication of composites are given.

Leeds, M. A.↗

Tensile stress-strain behavior of graphite/epoxy laminates

The tensile stress-strain behavior of a variety of graphite/epoxy laminates was examined. Longitudinal and transverse specimens from eleven different layups were monotonically loaded in tension to failure. Ultimate strength, ultimate strain, and strss-strain curves wee obtained from four replicate tests in each case. Polynominal equations were fitted by the method of least squares to the stress-strain data to determine average curves. Values of Young's modulus and Poisson's ratio, derived from polynomial coefficients, were compared with laminate analysis results. While the polynomials appeared to accurately fit the stress-strain data in most cases, the use of polynomial coefficients to calculate elastic moduli appeared to be of questionable value in cases involving sharp changes in the slope of the stress-strain data or extensive scatter.

Garber, D. P.↗

Properties of Low-Expansion Laminates

Laminate elastic constants and coefficients of thermal expansion calculated for near-zero-expansion graphite/aluminum and graphite/ magnesium composites. Report presents results in graphic form for these properties as function of laminate angle and fiber volume fraction for four high-modulus continuous-pitch fiber.

Kural, M.↗