Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrochemical nitrogen reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Atomic Molybdenum for Synthesis of Ammonia with 50% Faradic Efficiency

The electrochemical dinitrogen (N 2 ) reduction reaction (NRR) under ambient conditions has gained significant interest as an environmentally friendly alternative to the traditional Haber–Bosch process for the synthesis of ammonia (NH 3 ). However, up to now, most of the reported NRR electrocatalysts with satisfactory catalytic activities have been hindered by the large overpotential in N 2 activation. The preparation of highly efficient Mo-based NRR electrocatalyst in acidic electrolytes under ambient conditions is demonstrated here, consisting of stabilized single Mo atoms anchored on holey nitrogen-doped graphene synthesized through a convenient potassium-salt-assisted activation method. At -0.05 V versus a reversible hydrogen electrode (RHE), an electrode consisting of the resultant electrocatalyst immobilized on carbon fiber paper can attain an exceptional Faradaic efficiency of 50.2% and a NH3 yield rate of 3.6 µg h -1 mg cat -1 with low overpotentials. Density functional theory calculations further unveil that compared to the original graphene without holes, the edge coordinated Mo atoms and the existence of vacancies on holey graphene lower the overpotential of N 2 reduction, thereby promoting the NRR catalytic activity. Finally, this work could provide new guidelines for future designs in single-atom catalysis that would be beneficial to ambient N 2 fixation, and replacement of classical synthesis processes that are very energy-intensive.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrochemical reduction of ammonia-captured CO 2 to CO over a nickel single-atom catalyst

Carbon reactive capture and conversion offers a sustainable route to valuable chemicals and fuels while aiding Green House Gas (GHG) reduction. Direct electrochemical conversion of capture solutions like bicarbonate avoids the energy demands of conventional CO 2 regeneration. Ammonium bicarbonate (NH 4 HCO 3 ) is particularly attractive due to its low decomposition temperature and ability to supply in situ CO 2 from dilute sources without requiring purified CO 2 . Meanwhile, single-atom catalysts (SACs) with nitrogen-coordinated metal sites further enhance CO 2 reduction efficiency using Earth-abundant materials. In this study, we demonstrate a nickel single-atom catalyst (Ni-SAC)-based electrolyzer that utilizes NH 4 HCO 3 as the CO 2 source, achieving significantly improved CO production performance compared to the conventional silver cathodes used in the CO 2 reduction reaction (CO 2 RR) to produce CO. The Ni-SAC cathode exhibited a Faradaic efficiency of 60.1% for CO production at −200 mA cm −2 , while the silver cathode achieved a Faradaic efficiency of only 2%, likely due to ammonium-induced poisoning. Furthermore, the integration of a customized microporous layer onto the electrode significantly increased the Faradaic efficiency from 64% to 83% at −100 mA cm −2 , emphasizing the crucial role of electrode structure optimization in enhancing CO selectivity. These findings demonstrate a sustainable and economically viable strategy for green CO production directly from CO 2 capture solutions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Mechanistic insights into metal, nitrogen doped carbon catalysts for oxygen reduction: progress in computational modeling

We report metal and nitrogen doped carbon materials (denoted as M–N–C) synthesized through high-temperature pyrolysis have been found to exhibit activity for oxygen reduction reaction (ORR) approaching that of Pt and electrochemical stability higher than previous MN 4 -containing macrocyclic molecular catalysts. Tremendous efforts have thus been devoted to the advancement of M–N–C catalysts as an economical alternative to Pt-based catalysts for proton exchange membrane fuel cell cathodes with a focus on simultaneously improving activity and stability. To this end, novel computational modeling techniques have been developed and applied to acquire knowledge crucial for accelerating the pace of M–N–C catalyst development. In this review, recent progress in computational method development, as well as the predictions of chemical structure of active sites, reaction pathways, ORR kinetics, and catalyst stability in electrochemical environments, are critically surveyed. Moreover, the crucial role of computational modeling to elucidate the functional mechanism of M–N–C catalysts for ORR in acid media and enable rational design of M–N–C catalysts is discussed with a visionary outlook for the field.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Boosting electrosynthesis of ammonia on surface-engineered MXene Ti 3 C 2

Seeking a breakthrough in the development of efficient nitrogen fixation catalysts has become the frontier of energy and chemical conversion schemes. In this work, we report that the MXene Ti 3 C 2 can serve as a promising catalyst for the electrochemical N 2 reduction reaction (NRR) under ambient conditions. The electrocatalytic performance of Ti 3 C 2 can be further optimized through surface engineering. Specifically, Ti 3 C 2 with the increased surface hydroxyl moieties demonstrates enhanced production of NH 3 with a yield rate of 1.71 μg h -1 cm -2 , a Faradaic efficiency of 7.01% at -0.2 V vs. RHE at 20 °C and an even higher yield rate of 12.46 μg h -1 cm -2 together with a Faradaic efficiency of 9.03% at -0.2 V vs. RHE at 60 °C. The detailed electrochemical analysis suggests that the surface hydroxyl modification can effectively facilitate the electron transfer, surface adsorption and activation of dinitrogen. Our work sheds light on the development of efficient NRR catalysts based on earth-abundant elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterization of ferredoxins involved in electron transfer pathways for nitrogen fixation implicates differences in electronic structure in tuning 2[4Fe 4S] Fd activity

Ferredoxins (Fds) are small proteins which shuttle electrons to pathways like biological nitrogen fixation. Physical properties tune the reactivity of Fds with different pathways, but knowledge on how these properties can be manipulated to engineer new electron transfer pathways is lacking. Recently, we showed that an evolved strain of Rhodopseudomonas palustris uses a new electron transfer pathway for nitrogen fixation. This pathway involves a variant of the primary Fd of nitrogen fixation in R. palustris, Fer1, in which threonine at position 11 is substituted for isoleucine (Fer1 T11I ). To understand why this substitution in Fer1 enables more efficient electron transfer, we used in vivo and in vitro methods to characterize Fer1 and Fer1 T11I . Electrochemical characterization revealed both Fer1 and Fer1 T11I have similar redox transitions (–480 mV and – 550 mV), indicating the reduction potential was unaffected despite the proximity of T11 to an iron-sulfur (Fe—S) cluster of Fer1. Additionally, disruption of hydrogen bonding around an Fe—S cluster in Fer1 by substituting threonine with alanine (T11A) or valine (T11V) did not increase nitrogenase activity, indicating that disruption of hydrogen bonding does not explain the difference in activity observed for Fer1 T11I . Electron paramagnetic resonance spectroscopy studies revealed key differences in the electronic structure of Fer1 and Fer1 T11I , which indicate changes to the high spin states and/or spin-spin coupling between the Fe—S clusters of Fer1. Finally, our data implicates these electronic structure differences in facilitating electron flow and sets a foundation for further investigations to understand the connection between these properties and intermolecular electron transfer.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

In Situ Neutron Reflectometry Reveals the Interfacial Microenvironment Driving Electrochemical Ammonia Synthesis

Electrified interfaces are critical to the performance of energy systems and often demonstrate substantial complexity under operating conditions. A nanoscale understanding of the interfacial microenvironment, i.e., the solid-electrolyte interphase (SEI), in lithium-mediated nitrogen reduction (Li–N 2 R) is key for realizing efficient ammonia (NH 3 ) production. Herein, we used time-resolved neutron reflectometry (NR) to observe SEI formation under Li–N 2 R conditions. We found that the LiBF 4 -based electrolyte provided a substantially more well-defined SEI layer than previous SEI NR interrogations that used LiClO 4 , highlighting the underlying chemistry that dictates electrolyte design and enabling new NR-based studies. Using in situ NR, we found that the LiBF 4 -derived SEI under Li–N 2 R conditions comprises a thick, diffuse outer layer and a thin, compact inner layer at low current cycling (<2 mA/cm 2 ), revealing a structure which ex situ studies have not been able to probe. Increased current cycling and sustained current cycling led to the merging of the layers into a single-layer SEI. Here, we used isotope contrast methods with d 6 -EtOH and d 8 -THF to drive time-resolved tracking of SEI growth at low current cycling, revealing that the proton donor modifies the inner layer, and the solvent modifies the outer layer. Li dendritic growth was observed in the absence of a proton donor. Neutron absorption also indicated the presence of boron in the SEI, underscoring the value of neutron-based interrogation. Our results inform Li-based systems and reaction microenvironments, and these methods can be applied broadly to interfacial energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding the Origin of Highly Selective CO 2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Abstract Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO 2 electroreduction (CO 2 R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO 2 reduction (CO 2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO 2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.

Koshy, David M.↗
DOE OSTI2020

Direct Characterization of Atomically Dispersed Catalysts: Nitrogen-Coordinated Ni Sites in Carbon-Based Materials for CO 2 Electroreduction

Metal, nitrogen-doped carbon materials have attracted interest as heterogenous catalysts that contain MN x active sites that are analogous to molecular catalysts. Of particular interest is Ni,N-doped carbon, a catalyst that is active for the electrochemical reduction of CO 2 to CO. Critical to the understanding of these materials is proof of single atomic sites and characterization of the environment surrounding the metal atom; however, directly probing this coordination remains challenging. This challenge is addressed in this study by combining scanning transmission electron microscopy (STEM), single atom electron energy loss spectroscopy (EELS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Through STEM imaging, atomic dispersion of Ni in the carbon framework is confirmed and image analyses are utilized to give semiquantitative estimates of neighbor distance distributions and site densities of Ni atoms. Atomic resolution EELS demonstrates that N and Ni are colocated at the single Ni atom sites suggesting Ni–N coordination. ToF-SIMS reveals a distribution of NiN x C y - fragments that reflect the Ni–N bonding environments within Ni,N-doped carbon. The fragmentation from Ni,N-doped carbon is similar to Ni phthalocyanine, suggesting the existence of heterogenized, molecular-like NiN 4 active sites which motivates future studies that leverage insight from molecular catalysis design to develop next-generation heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Covalent Organic Framework (COF) Derived Ni–N–C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO 2 reduction is a potential approach to convert CO 2 into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel-nitrogen-doped carbon (Ni-N-C) is an efficient catalyst for CO 2 reduction to CO, and the single-site Ni-N x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)-derived Ni-N-C catalysts, for which the Ni-N x content could be adjusted by the pyrolysis temperature. The combination of high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure evidenced the presence of Ni single-sites, and quantitative X-ray photoemission addressed the relation between active site density and turnover frequency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Carbon nanodot precursors enable ultrahigh-loading copper single-atom catalysts for oxygen reduction reaction

Single-atom catalysts (SACs) have attracted significant attention in electrocatalysis due to their high metal utilization and tunable electronic structures; however, their practical implementation is often limited by poor atomic dispersion, low metal loadings (typically < 1 wt%), and insufficient anchoring of single metal atoms on catalyst supports. Herein, we report a simple and versatile strategy to synthesize copper single-atom catalysts (Cu-SACs) with ultrahigh metal loading using citric-acid-derived carbon nanodots as metal-capturing precursors. Through hydrothermal treatment followed by pyrolysis in the presence of urea, atomically dispersed copper atoms coordinated with nitrogen are incorporated into a carbon framework, achieving a Cu loading of up to 20 wt% while maintaining atomic dispersion. Notably, a significant fraction of the copper single atoms exists as Cu+–N2 coordination, which provides under-coordinated and catalytically active sites. The resulting Cu-SAC exhibits promising oxygen reduction reaction (ORR) activity in alkaline media, delivering a limiting current density comparable to that of commercial 20 wt% Pt/C with a predominant four-electron reduction pathway. Despite this high intrinsic activity, durability tests reveal gradual performance degradation under prolonged electrochemical operation, which is attributed to demetallation and aggregation of copper single atoms into metallic nanoparticles. These results demonstrate the potential of carbon nanodot-based platforms for synthesizing high-loading SACs, while underscoring the critical need to simultaneously control carbon porosity and metal–nitrogen coordination to enhance active-site accessibility and durability.

Sharma, Prakhar [University of Kentucky]↗
DOE OSTI2021

Harnessing Photoelectrochemistry for Wastewater Nitrate Treatment Coupled with Resource Recovery

Wastewater is a misplaced resource well suited to recover nutrients, value-added chemicals, energy, and clean water. A photoelectrochemical device is proposed to transform wastewater nitrates to ammonia and nitrous oxide, coupled with water oxidation. Numerical models were developed to quantify the dependence of process efficiencies and nitrogen-removal rates on light absorber band gaps, electrocatalytic kinetic parameters, competing oxygen reduction and hydrogen evolution reactions, and the reacting nitrate species concentrations that affect the mass-transfer limited current densities. With a single light-absorber and state-of-the-art catalysts, optimal solar-to-chemical efficiencies of 7% and 10% and nitrogen-removal rates of 260 and 395 gN m -2 day -1 are predicted for nitrate reduction to ammonia and nitrous oxide, respectively. The influence of competing reactions on the performance depends on the nitrate concentration and band gap of the light absorber modeled. Oxygen reduction is more dominant than hydrogen evolution to compete with the nitrate reduction reaction, but it is mass-transfer limited. Even with kinetic parameters that enhanced the driving forces for the competing reactions, the performance is only minimally affected by these reactions for optimally selected band gaps and nitrate concentrations larger than 100 mM. Here, theoretically predicted peak nitrogen removal rates and specific energy intensities are competitive with reported estimates for electrochemical and Sharon-Anammox processes for ammonia recovery and nitrogen removal, respectively. This result, together with the added benefit of harnessing sunlight to produce value-added products, indicates promise in the photoelectrochemical approach as a tertiary pathway to recover nutrients and energy from wastewater nitrates.

25 ENERGY STORAGE↗
DOE OSTI2022

Highly Selective Oxygen Reduction to Hydrogen Peroxide on a Carbon-Supported Single-Atom Pd Electrocatalyst

Selective electrochemical two-electron oxygen reduction is a promising route for renewable and on-site H 2 O 2 generation as an alternative to the anthraquinone process. In this study, we report a high-performance nitrogen-coordinated single-atom Pd electrocatalyst, which is derived from Pd-doped zeolitic imidazolate frameworks (ZIFs) through one-step thermolysis. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) combined with X-ray absorption spectroscopy verifies atomically dispersed Pd atoms on nitrogen-doped carbon (Pd-NC). The single-atom Pd-NC catalyst exhibits excellent electrocatalytic performance for two-electron oxygen reduction to H 2 O 2 , which shows ~95% selectivity toward H 2 O 2 and an unprecedented onset potential of ~0.8 V versus revisable hydrogen electrode (RHE) in 0.1 M KOH. Density functional theory (DFT) calculations demonstrate that the Pd-N 4 catalytic sites thermodynamically prefer *–O bond breaking to O–O bond breaking, corresponding to a high selectivity for H 2 O 2 production. This work provides a deep insight into the understanding of the catalytic process and design of high-performance 2e– ORR catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Method and composition for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex

A method for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The method includes dissolving a copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in water having an excess amount of nitrates, nitrites, and/or hydroxylamine therein. The dissolved copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in the water is subjected to electrochemical reduction to form a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex reduces the nitrates, nitrites, and/or hydroxylamine in the water to compounds with nitrogen in a lower oxidation state with the homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sulfur-doped graphene anchoring of ultrafine Au 25 nanoclusters for electrocatalysis

The biggest challenge of exploring the catalytic properties of under-coordinated nanoclusters is the issue of stability. We demonstrate herein that chemical dopants on sulfur-doped graphene (S-G) can be utilized to stabilize ultrafine (sub-2 nm) Au 25 (PET)18 clusters to enable stable nitrogen reduction reaction (NRR) without significant structural degradation. The Au 25 @S-G exhibits an ammonia yield rate of 27.5μgNH 3 ∙ mg Au -1 ∙ h -1 at -0.5 V with faradic efficiency of 2.3%. More importantly, the anchored clusters preserve ~ 80% NRR activity after four days of continuous operation, a significant improvement over the 15% remaining ammonia production rate for clusters loaded on undoped graphene tested under the same conditions. Isotope labeling experiments confirmed the ammonia was a direct reaction product of N 2 feeding gas instead of other chemical contaminations. Ex-situ X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy of post-reaction catalysts reveal that the sulfur dopant plays a critical role in stabilizing the chemical state and coordination environment of Au atoms in clusters. Further ReaxFF molecular dynamics (RMD) simulation confirmed the strong interaction between Au nanoclusters (NCs) and S-G. Furthermore, this substrate-anchoring process could serve as an effective strategy to study ultrafine nanoclusters’ electrocatalytic behavior while minimizing the destruction of the under-coordinated surface motif under harsh electrochemical reaction conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Revealing the Nanostructure of Mesoporous Fuel Cell Catalyst Supports for Durable, High-Power Performance

Achieving high power performance and durability with low Pt loadings are critical challenges for proton exchange membrane fuel cells. PtCo catalysts developed on new carbon black supports show promise by simultaneously providing good oxygen reduction kinetics and local oxygen transport. We investigate the role of nanoscale morphology in the performance of these catalysts supported on accessible (HSC-e and HSC-f) and conventional (Ketjen Black) porous carbons using 3D electron tomography, nitrogen sorption, and electrochemical performance measurements. We find that the accessible porous carbons have hollow interiors with mesopores that are larger and more numerous than conventional porous carbons. However, mesopore-sized openings (>2 nm width) are too rare to account for significant oxygen transport. Instead we propose the primary oxygen transport pathway into the interior is through 1–2 nm microporous channels permeating the carbon. The increased mesoporosity in the accessible porous carbons results in a shorter diffusion pathlength through constrictive, tortuous micropores in the support shell leading to lower local oxygen transport resistance. In durability testing, the accessible porous carbons show faster rates of electrochemical surface area loss, likely from fewer constrictive pores that would mitigate coarsening, but maintain superior high current density performance at end of test from the improved local oxygen transport.

Electrochemistry↗
DOE OSTI2024

Tuning Two-Dimensional Phthalocyanine Dual Site Metal–Organic Framework Catalysts for the Oxygen Reduction Reaction

Metal-organic frameworks (MOFs) offer an interesting opportunity for catalysis, particularly for metal-nitrogen-carbon (M-N-C) motifs by providing an organized porous structural pattern and well-defined active sites for the oxygen reduction reaction (ORR), a key need for hydrogen fuel cells and related sustainable energy technologies. Here, in this work, we leverage electrochemical testing with computational models to study the electronic and structural properties in these systems and their relationship to ORR activity and stability based on dual transitional metal centers. These consists of two M1 metals with amine nodes coordinated to a single M2 metal with a phthalocyanine linker, where M1/M2 = Co, Ni, or Cu. Co-based metal centers, in particular Ni-Co, demonstrate the highest overall activity of all nine tested MOFs. Computationally, we identify the dominance of Co-sites, relative higher importance of the M2 site, and the role of layer M1 interactions on the ORR activity. Selectivity measurements indicate that M1 sites of MOFs, particularly Co, exhibits lowest (< 4%), and Ni demonstrates highest (>46%) two-electron selectivity, in good agreement with computational studies. Direct in-situ stability characterization, measuring dissolved metal ions, and calculations, using an alkaline stability metric, confirm that Co is the most stable metal in the MOF, while Cu exhibits notable instability at the M1. Overall, this study reveals how atomistic coupling of electronic and structural properties affects the ORR performance of dual site MOF catalysts and opens new avenues for tunable design and future development of these systems for practical electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Graphene-supported single atom catalysts for high performance lithium-oxygen batteries

The optimal choice of d-block metals in single atom catalysts (SACs) is crucial for designing efficient electrocatalysts for activating the Oxygen reduction reaction (ORR)/ Oxygen evolution reaction (OER) in lithiumoxygen batteries (LOBs). Herein, we used the Quantum Mechanics methods to understand the origin of reactivity for a series of 16 d-block metals supported on nitrogen-doped graphene as SACs for ORR and OER in LOBs. Based on the Gibbs free energy calculations, we found that among the 16 SACs investigated, Zn-SAC exhibits the highest electrochemical activity with the lowest overpotential of 0.17 V. Here we then used machine learning (ML) to develop an intrinsic descriptor, phi, that correlates the catalytic activity with electronic and chemical properties of the catalytic centers at the M-N 4 active site on graphene surface. We established a linear relationship between phi and the catalytic activity that provides guidance for designing efficient SACs for electrocatalysis in LOBs. To validate these predictions, we report electrochemical measurements showing that Zn-SAC exhibits an ultra-stable cyclability with reduced overpotentials over Mo-SAC and nitrogen-doped graphene (NG), confirming our theoretical prediction. This fundamental work provides a deep understanding on the rational design of efficient SACs for OER/ ORR in LOBs.

25 ENERGY STORAGE↗