Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron excitation & ionization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Laser-driven ionization mechanisms of aluminum for single particle aerosol mass spectrometry

Single particle aerosol mass spectrometry (SPAMS), an analytical technique for measuring the size and composition of individual micron-scale particles, is capable of analyzing atmospheric pollutants and bioaerosols much more efficiently and with more detail than conventional methods which require the collection of particles onto filters for analysis in the laboratory. Despite SPAMS’ demonstrated capabilities, the primary mechanisms of ionization are not fully understood, which creates challenges in optimizing and interpreting SPAMS signals. In this paper, we present a well-stirred reactor model for the reactions involved with the laser-induced vaporization and ionization of an individual particle. The SPAMS conditions modeled in this paper include a 248 nm laser which is pulsed for 8 ns to vaporize and ionize each particle in vacuum. The ionization of 1 μm, spherical Al particles was studied by approximating them with a 0-dimensional plasma chemistry model. The primary mechanism of absorption of the 248 nm photons was pressure-broadened direct photoexcitation to Al(y 2 D). Atoms in this highly excited state then undergo superelastic collisions with electrons, heating the electrons and populating the lower energy excited states. We found that the primary ionization mechanism is electron impact ionization of various excited state Al atoms, especially Al(y 2 D). Because the gas expands rapidly into vacuum, its temperature decreases rapidly. The rate of three-body recombination (e - + e - + Al + → Al + e - ) increases at low temperature, and most of the electrons and ions produced recombine within several μs of the laser pulse. The importance of the direct photoexcitation indicates that the relative peak heights of different elements in SPAMS mass spectra may be sensitive to the available photoexcitation transitions. We also discuss the effects of laser intensity, particle diameter, and expansion dynamics.

47 OTHER INSTRUMENTATION↗

Vibrationally resolved ionization cross sections for the ground state and electronically excited states of the hydrogen molecule and its isotopomeres

An existing set of vibrationally resolved ionization cross section for the ground state and the first excited states of the hydrogen molecule, based on the Gryzinski method, is extended by cross sections for the isotopomeres of H{sub 2} (i.e. D{sub 2}, T{sub 2}, HD, HT, and DT), both for non-dissociative and dissociative ionizations. The comparison of cross sections for non-dissociative ionization of H{sub 2} with results obtained by the Molecular Convergent Close-Coupling method gives a very good agreement. The compiled tables give non-dissociative and dissociative cross sections for the ground state and the five energetically lowest electronically excited states of H{sub 2} and its isotopomeres, in each case for the first 9 vibrational levels. Data for all vibrational levels of the excited states is available online.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calculated ionization rates, ion densities, and airglow emission rates due to precipitating electrons in the nightside ionosphere of Mars

The calculations presented in this paper clearly establish that the electron fluxes measured by the HARP instrument, carried on board Phobos 2, could cause significant electron impact ionization and excitation in the nightside atmosphere of Mars, if these electrons actually do precipitate. The calculated peak electron densities were found to be about a factor of 2 larger than the mean observed nightside densities, indicating that if a significant fraction of the measured electrons actually precipitate, they could be the dominant mechanism responsible for maintaining the nightside ionosphere. The calculated zenith column emission rates of the O I 5577-A and 6300-A and CO Cameron band emissions, due to electron impact and dissociative recombination mechanisms, were found to be significant.

Haider, S. A.↗

Effects of screening and pressure ionization on the electron broadening of spectral lines in dense plasmas

Collisions between electrons and radiating atoms broaden spectral absorption and emission lines in dense plasmas. High densities also introduce screening and pressure ionization effects that distort the wave functions of both bound and free electrons. In order to study how dense plasma effects influence the electron broadening of spectral lines, this paper incorporates electron wave functions from an average-atom (AA) model to calculate the linewidth of the B III 2⁢𝑝−2⁢𝑠 transition at 𝑇 = 10 eV for mass densities ranging from 𝜌 = 10 −4 to 0.4⁢ g⁡/cc. The calculation method uses the impact approximation, allowing the linewidth to be written in terms of electron-collision cross sections and an interference term. Compared to an otherwise identical calculation that uses Coulomb free wave functions, the AA method is found to modify both the cross sections and the resulting linewidth at sufficiently high density by introducing screening and pressure-ionized bound states. Screening lowers the cross sections at low energies and near electron excitation thresholds, while pressure-ionized bound states introduce resonances into the continuum. Thus, as the density increases, the relative linewidth between the AA and Coulomb calculations follows a general decrease because of screening, with sharp increases at various intervals due to pressure ionization. Finally, the AA results are also compared with a common approach to introduce screening through the interaction potential and reduced models that use the Bethe formula for the inelastic electron-collision cross sections.

electronic excitation & ionization↗

Influence of liquid conductance on the temporal evolution of self-organization patterns in atmospheric pressure DC glow discharges

Abstract Self-Organized Patterns (SOPs) at plasma-liquid interface in atmospheric pressure plasma discharges refer to the formation of intricate and puzzling structures due to the interplay of electrodynamic and hydrodynamic processes. Studies conducted to date have shown that this phenomenon results in the formation of distinctive patterns such as circular ring, star, gear, dots, spikes, etc., and primarily depends on working gas, electrolyte type, gap distance, current, conductivity, etc. However, an adequate understanding of how these patterns change from one type to another is still not available. This study aims to elucidate the influence of initial liquid conductance ( σ i ) on the temporal evolution of SOPs in liquid-anode discharges. The discharge was generated in a pin-to-liquid anode configuration at a constant helium (He) flow rate of 500 sccm and DC applied voltage of 6 kV at a gap distance of 12 mm. Through the gradual increment of σ i from 1.8 μ S to 4820 μ S, we observe that the trend in the evolution of SOPS takes place as solid discs, spikes, dots, rings, double rings, and stars. The continuous formation of reactive species onto the liquid anode in all conductive solutions results in a decrease in pH, an increase in bulk liquid temperature, and an increase in total dissolved solutes, and these have been confirmed through experimental measurements. Observations using optical emission spectroscopy show that the electrons at the plasma-liquid interface participate in the reduction of cations followed by their excitation & ionization due to which electron density as well as emissions from excited species (mainly hydroxyl radicals & excited nitrogen) decrease with time. Our investigation provides experimental evidence on the presence of cations at the plasma-liquid interface required for SOP formation.

Physics↗

Escape and ionization of atomic oxygen from Io

Model calculations of the neutral O cloud of Io, based on atom-electron-impact excitation and ionization processes in the plasma torus, are presented. The model is quantitatively anchored to the 6300-A O I emission intensity observations of Brown (1981), and uses a plasma temperature and density structure based on Voyager 1 and 2 and EUV data. Parameters predicted by the model include satellite emission flux = 1.5 x 10 to the 9th/sq cm sec, ion-loading rate = 6.2 x 10 to the 26th ions/sec, O mass-loading rate = 16.6 kg/sec, and O ion-energy input rate = 2.7 x 10 to the 10th W. The spatial morphologies of the parameters are shown. Rough estimates obtained by accounting for a neutral S cloud and plasma-torus charge-exchange reactions include O source flux = 1.2 x 10 to the 10th/sq cm sec, ion-loading rate = 4.0 x 10 to the 27th ions/sec, ion-diffusive-loss time = 200 days, plasma mass-loading rate = 150 kg/sec, satellite mass-loss rate = 270 kg/sec, and maximum ion-energy input = 4 x 10 to the 11th W.

Smyth, W. H.↗

Analytic Gradients for Equation-of-Motion Coupled Cluster with Single, Double, and Perturbative Triple Excitations

Understanding the process of molecular photoexcitation is crucial in various fields, including drug development, materials science, photovoltaics, and more. The electronic vertical excitation energy is a critical property, for example in determining the singlet-triplet gap of chromophores. However, a full understanding of excited-state processes requires additional explorations of the excited-state potential energy surface and electronic properties, which is greatly aided by the availability of analytic energy gradients. Owing to its robust high accuracy over a wide range of chemical problems, equation-of-motion coupled-cluster with single and double excitations (EOM-CCSD) is a powerful method for predicting excited state properties, and the implementation of analytic gradients of many EOM-CCSD (excitation energies, ionization potentials, electron attachment energies, etc.) along with numerous successful applications high- lights the flexibility of the method. In specific cases where a higher level of accuracy is needed or in more complex electronic structures, the inclusion of triple excitations becomes essential, for example, in the EOM-CCSD* approach of Saeh and Stanton. In this work, we derive and implement for the first time the analytic gradients of EOMEE-CCSD*, which also provides a template for analytic gradients of related ex- cited state methods with perturbative triple excitations. Here, the capabilities of analytic EOMEE-CCSD* gradients are illustrated by several representative examples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the chemical bonding of ground and excited states of HfO and HfB with correlated wavefunction theory and density functional approximations

Knowledge of the chemical bonding of HfO and HfB ground and low-lying electronic states provides essential insights into a range of catalysts and materials that contain Hf–O or Hf–B moieties. Here, we carry out high-level multi-reference configuration interaction theory and coupled cluster quantum chemical calculations on these systems. We compute full potential energy curves, excitation energies, ionization energies, electronic configurations, and spectroscopic parameters with large quadruple-ζ and quintuple-ζ quality correlation consistent basis sets. We also investigate equilibrium chemical bonding patterns and effects of correlating core electrons on property predictions. Differences in the ground state electron configuration of HfB(X 4 Σ - ) and HfO(X 1 Σ + ) lead to a significantly stronger bond in HfO than HfB, as judged by both dissociation energies and equilibrium bond distances. We extend our analysis to the chemical bonding patterns of the isovalent HfX (X = O, S, Se, Te, and Po) series and observe similar trends. We also note a linear trend between the decreasing value of the dissociation energy (D e ) from HfO to HfPo and the singlet–triplet energy gap (ΔE S–T ) of the molecule. Finally, we compare these benchmark results to those obtained using density functional theory (DFT) with 23 exchange–correlation functionals spanning multiple rungs of “Jacob’s ladder.” When comparing DFT errors to coupled cluster reference values on dissociation energies, excitation energies, and ionization energies of HfB and HfO, we observe semi-local generalized gradient approximations to significantly outperform more complex and high-cost functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion irradiation and modification: The role of coupled electronic and nuclear energy dissipation and subsequent nonequilibrium processes in materials

Understanding material responses to energy deposition from energetic charged particles is important for defect engineering, ion-beam processing, ion-beam analysis and modification, geologic aging, space exploration, and nuclear applications. As an incident ion penetrates a solid, its energy is transferred to electrons and to atomic nuclei of the solid. Much of this electronic energy deposition is subsequently transferred to the atomic structure via electron–phonon (e–ph) coupling, leading to local inelastic thermal spikes in which energy dissipation is influenced by the local environment. In addition, intense ionization can lead to high densities of localized electronic excitations in wide-bandgap materials and ceramics that can affect defect dynamics and atomic mobility. Specifically, energy exchange between electrons and atomic nuclei, along with localized electronic excitations, can lead to substantial competitive (ionization-induced annealing), additive (both electronic and nuclear energy depositions contributing to damage production), and synergistic (more damage than the sums of separate damage processes) effects. Although nonmonotonic effects of the e–ph coupling strength and athermal processes are demonstrated for pre-existing defects and residual damage during ion–solid interactions, there is limited understanding of when such electronic effects must be considered in atomic-scale models of damage production and evolution in a broad variety of materials. Complex ceramics and chemically disordered solid solution alloys with different constituent elements allow a systematic evaluation of defect dynamics and irradiation performance with increasing complexity. Current knowledge regarding tuning of bonding characteristics and chemical disorder to control atomic-level dynamics is reviewed. Although a lack of fundamental understanding obstructs the advancement of reliable predictions for ion beam material modification, it highlights challenges and opens research opportunities. Insights into the complex electronic and atomic correlations with extreme energy deposition will strengthen our ability to design materials and predict ion-irradiation-induced damage in a radiation environment, and they may pave the way to better control fundamental processes and design new material functionalities for advanced technologies.

36 MATERIALS SCIENCE↗

Femtosecond Nonadiabatic Confinement of Molecular Dication Yield

Doubly charged molecular cations often carry signatures of electronic correlation and electron–nuclear entanglement present in the parent cation. Here, we produce ethylene dications using a combination of an extreme ultraviolet pump and near-infrared probe pulses, observing a peak in the dication yield at a pump–probe delay of approximately 15 fs. Ab-initio calculations, which explicitly take into account coupled electron–nuclear dynamics induced by the pump and the multiphoton nature of the probe-induced ionization step, reproduced the observed delay in the yield. It originates from resonant enhancement of the multiphoton ionization of the electronically excited ethylene cation as the carbon–carbon double bond expands. However, this effect is tempered by rapid nonadiabatic relaxation of the excited ionic states. Our results suggest a general mechanism whereby ultrafast nonadiabatic relaxation of a molecular ion can compete with its strong-field ionization rate, confining the dication yield to a narrow temporal window of a few femtoseconds.

74 ATOMIC AND MOLECULAR PHYSICS↗

Calculations of the Electron Energy Distribution Function in a Uranium Plasma by Analytic and Monte Carlo Techniques

Electron energy distribution functions were calculated in a U235 plasma at 1 atmosphere for various plasma temperatures and neutron fluxes. The distributions are assumed to be a summation of a high energy tail and a Maxwellian distribution. The sources of energetic electrons considered are the fission-fragment induced ionization of uranium and the electron induced ionization of uranium. The calculation of the high energy tail is reduced to an electron slowing down calculation, from the most energetic source to the energy where the electron is assumed to be incorporated into the Maxwellian distribution. The pertinent collisional processes are electron-electron scattering and electron induced ionization and excitation of uranium. Two distinct methods were employed in the calculation of the distributions. One method is based upon the assumption of continuous slowing and yields a distribution inversely proportional to the stopping power. An iteration scheme is utilized to include the secondary electron avalanche. In the other method, a governing equation is derived without assuming continuous electron slowing. This equation is solved by a Monte Carlo technique.

Bathke, C. G.↗

X-ray secondary heating and ionization in quasar emission-line clouds

Accurate Monte Carlo computations of the X-ray secondary electron heating, ionization, and excitation of H and He gas in interstellar space and in quasar emission-line clouds, are presented. The fraction of energy deposited in each form is sensitive to the background ionization fraction, x = n(H+)/n(Htot), and can affect the temperature, ionization state, and line emissivities at large depths in X-ray photoionized clouds. Analytic fits are provided for these energy fractions over the range 0.0001-1 for primary electron energies up to many keV. In both broad-line and narrow-line clouds, emission lines sensitive to the energy budget and electron density may be strongly affected.

Shull, J. M.↗

Ionization Properties of Molecules Commonly Used for Plasma Processing of Semi-Conductors

Two types of processes are involved in plasma processing of semi-conductors. They are: plasma etching or cleaning and plasma deposition of the semi-conducting materials. For plasma etching of semi-conductors mostly halogen containing gases are used as additives to gases such as O2 and N2. For plasma deposition gases such as C2H2, SiH4, Si2H6 have been tested in the past. For an optimal performance of a reactor it is important to model the plasma. In this modeling effort electron impact excitation and ionization cross sections play a central role. For ionization balance calculations values of ionization cross sections are needed. Ion molecule reactions determine the ultimate composition of the plasma. Recently it has been discovered that the by products of many of these plasmas are per fluro hydrocarbons (PFCs) which are highly infrared absorbing species and have long life times in the atmosphere. They cause global warming. A lot of research is being pursued at the present time to find alternative molecules which do not produce global warming gases as the and product of the plasma processing reactor. There is also interest in the ionization and dissociative ionization properties of these molecules from the point view of the plasma abatement of the pollutant gases at the exhaust of the semi-conductor processing reactors. At the conference ionization and dissociative ionization properties of some of these molecules will be presented.

Srivastava, S. K.↗

Photoabsorption in formaldehyde

Theoretical studies of the vertical electronic dipole excitation and ionization spectra in molecular formaldehyde are reported. The investigations relied on configuration-interaction calculations and moment-theory techniques. A double-zeta basis of contracted Gaussian-lobe functions supplemented with appropriate polarization and bond functions was used to construct Fock spectra in C(2 nu) symmetry for certain states near the ground state equilibrium geometry. The ionization energies, discrete vertical transition frequencies, and oscillator strengths for occupied and vertical Fock orbitals are in general accord with experimental determinations and other theoretical calculations. Stieltjes and Chebyshev vertical electronic photoionization profiles were calculated and found to be in good agreement with appropriately averaged photoionization-mass spectrometric measurements of the cross section for parent H2CO(+) ion production.

Langhoff, P. W.↗

Strategies for solving the excited-state self-consistent-field problem for highly excited and multiply ionized states

The dynamics of molecules exposed to intense x-ray radiation involve a large number of multiply ionized and highly excited electronic configurations. To model these dynamics a reliable and efficient electronic structure model is imperative. Employing the Hartree-Fock-Slater electronic structure model in combination with the maximum overlap method, we quantify the associated convergence failures when calculating electronic states of carbon monoxide with multiple vacancies in the core and valence levels. Here, we characterize these cases and describe strategies to overcome the convergence problems. The described techniques not only eliminate all convergence issues for CO but also result in a significant reduction of convergence failures for simulations of the x-ray-induced multiple ionization dynamics of the phenol molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗

Data analysis and theoretical studies for atmospheric Explorer C, D and E

The research concentrated on construction of a comprehensive model of the chemistry of the ionosphere. It proceeded by comparing detailed predictions of the atmospheric parameters observed by the instrumentation on board the Atmospheric Explorer Satellites with the measured values and modifying the chemistry to bring about consistency. Full account was taken of laboratory measurements of the processes identified as important. The research programs were made available to the AE team members. Regularly updated tables of recommended values of photoionization cross sections and electron impact excitation and ionization cross sections were provided. The research did indeed lead to a chemistry model in which the main pathways are quantitatively secure. The accuracy was sufficient that remaining differences are small.

Dalgarno, A.↗

Monte Carlo simulation of radiating reentry flows

The Direct Simulation Monte Carlo (DSMC) method is applied to a radiating, hypersonic, axisymmetric flow over a blunt body in the near continuum regime. The ability of the method to predict the flowfield radiation and the radiative heating is investigated for flow over the Project Fire II configuration at 11.36 kilometers per second at an altitude of 76.42 kilometers. Two methods that differ in the manner in which they treat ionization and estimate electronic excitation are employed. The calculated results are presented and compared with both experimental data and solutions where radiation effects were not included. Differences in the results are discussed. Both methods ignore self absorption and, as a result, overpredict measured radiative heating.

Taylor, Jeff C.↗