SEARCH · Search NASA

Results for “end-effector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Experimental study on direct adaptive control of a PUMA 560 industrial robot

The implementation and experimental validation of a direct adaptive control scheme on a PUMA 560 industrial robot is discussed. The design theory for direct adaptive control of manipulators is outlined and the test facility and software are described. Results are presented from the experiments on the simultaneous control of all of the six joint angles and control of the end-effector position and orientation of the robot. Also, the possible applications of the direct adaptive control scheme are considered.

Seraji, H.↗

NASA NTRS1989

Case studies in configuration control for redundant robots

A simple approach to configuration control of redundant robots is presented. The redundancy is utilized to control the robot configuration directly in task space, where the task will be performed. A number of task-related kinematic functions are defined and combined with the end-effector coordinates to form a set of configuration variables. An adaptive control scheme is then utilized to ensure that the configuration variables track the desired reference trajectories as closely as possible. Simulation results are presented to illustrate the control scheme. The scheme has also been implemented for direct online control of a PUMA industrial robot, and experimental results are presented. The simulation and experimental results validate the configuration control scheme for performing various realistic tasks.

Seraji, H.↗

NASA NTRS1990

Effect of joint imperfections on static control of adaptive structures as space cranes

Effect of imperfections in the joints of an adaptive structure on its slow (no inertia forces) motion along a prescribed trajectory as a space crane is studied. Two mathematical models to predict the effect of joint imperfections are proposed. The two models are used to obtain estimates of the deviations of the node of the space crane to which the end-effector is attached, from its prescribed trajectory. An application of the models to a two-section space crane is given.

Ramesh, A. V.↗

NASA NTRS1990

Constrained trajectory optimization for kinematically redundant arms

Two velocity optimization schemes for resolving redundant joint configurations are compared. The Extended Moore-Penrose Technique minimizes the joint velocities and avoids obstacles indirectly by adjoining a cost gradient to the solution. A new method can incorporate inequality constraints directly to avoid obstacles and singularities in the workspace. A four-link arm example is used to illustrate singularity avoidance while tracking desired end-effector paths.

Carignan, Craig R.↗

NASA NTRS1989

End-effector-joint conjugates for robotic assembly of large truss structures in space: A second generation

Attachment of strut to node can be accomplished with a variety of mechanisms. All require extensive standoff elements (called scars) added to the nodes. These increase packaging volume for the nodes by as much as 300 percent. First generation designs also tend to be either heavy or expensive due to complex parts. Screws thread mechanisms are discussed simplest and most easily manufactured of alternatives. Torque and rotational motion must be transmitted across the strut to end-effector interface accomplishing the joining process and establishing a specific preload. Four drive mechanisms are considered: worm, helical, bevel, and differential gears.

Brewer, William V.↗

NASA NTRS1990

Collision avoidance of a redundant manipulator operating through a window

The problem of collision-free operation of a redundant robot manipulator through a window is addressed. The window is modeled by a polygon with the sides representing the edges of the window. A performance criterion is defined to maximize the shortest distances between the arm link axes and the edges of the window. An efficient gradient projection optimization scheme for the kinematic control of manipulators with multiple degrees of redundancy is developed and used. The effectiveness of this scheme and the validity of the performance criterion are verified through simulations of the seven-degree-of-freedom NASA Laboratory Telerobotic Manipulator (LTM), where controlling only the position of the end-effector provides three degrees of redundancy.

Zghal, H.↗

NASA NTRS1990

Efficient gradient projection optimization for manipulators with multiple degrees of redundancy

An efficient gradient projection optimization scheme is presented for manipulators with multiple degrees of redundancy. This is an extension of the gradient projection scheme presented by Dubey et al. (1989) for manipulators with one degree of redundancy. The feasibility and effectiveness of this scheme are tested through simulations of the seven-degree-of-freedom NASA Laboratory Telerobotic Manipulator (LTM). Only the position of the LTM end effector is controlled, which requires only three degrees of freedom. The remaining joints, except for the wrist roll joint, which does not contribute to the end-effector linear velocity, provide three degrees of redundacy.

Zghal, H.↗

NASA NTRS1989

Effect of imperfections on static control of adaptive structures as a space crane

Ramesh, A. V.↗

NASA NTRS1992

Development of a machine vision guidance system for automated assembly of space structures

The topics are presented in viewgraph form and include: automated structural assembly robot vision; machine vision requirements; vision targets and hardware; reflective efficiency; target identification; pose estimation algorithms; triangle constraints; truss node with joint receptacle targets; end-effector mounted camera and light assembly; vision system results from optical bench tests; and future work.

Eric G Cooper↗

NASA NTRS1992

Robust adaptive kinematic control of redundant robots

The paper presents a general method for the resolution of redundancy that combines the Jacobian pseudoinverse and augmentation approaches. A direct adaptive control scheme is developed to generate joint angle trajectories for achieving desired end-effector motion as well as additional user defined tasks. The scheme ensures arbitrarily small errors between the desired and the actual motion of the manipulator. Explicit bounds on the errors are established that are directly related to the mismatch between actual and estimated pseudoinverse Jacobian matrix, motion velocity and the controller gain. It is shown that the scheme is tolerant of the mismatch and consequently only infrequent pseudoinverse computations are needed during a typical robot motion. As a result, the scheme is computationally fast, and can be implemented for real-time control of redundant robots. A method is incorporated to cope with the robot singularities allowing the manipulator to get very close or even pass through a singularity while maintaining a good tracking performance and acceptable joint velocities. Computer simulations and experimental results are provided in support of the theoretical developments.

Tarokh, M.↗

NASA NTRS1991

The attitude control problem

A general framework for the analysis of the attitude tracking control problem for a rigid body is presented. A large family of globally stable control laws is obtained by using the globally nonsingular unit quaternion representation in a Lyapunov function candidate whose form is motivated by the consideration of the total energy of the rigid body. The controllers share the common structure of a proportional-derivative feedback plus some feedforward which can be zero (the model-independent case), the Coriolis torque compensation, or an adaptive compensation. These controller structures are compared in terms of the requirement on the a priori model information, guaranteed transient performance, and robustness. The global stability of the Luh-Walker-Paul robot end-effector controller is also analyzed in this framework.

Wen, John Ting-Yung↗

NASA NTRS1991

The RAPT control method for nonlinear systems

The Rapid Advancement Preview Tracking (RAPT) control method uses both a nonlinear system model and a linearized system model to provide a form of feedback/preview control for nonlinear systems. It uses measurements of the states to calculate the current preview control signal from a local linearization of the state equations, and then iteratively calculates a perturbation correction for that control using the nonlinear equations. The corrected control signal is then applied to the system, driving the end-effector to the next position along a specified trajectory. Computer simulations of tracking control for two-link planar manipulators indicate that this algorithm may be fast enough for real-time control.

Long, T. W.↗

NASA NTRS1991

Task decomposition for a multilimbed robot to work in reachable but unorientable space

Robot manipulators installed on legged mobile platforms are suggested for enlarging robot workspace. To plan the motion of such a system, the arm-platform motion coordination problem is raised, and a task decomposition is proposed to solve the problem. A given task described by the destination position and orientation of the end effector is decomposed into subtasks for arm manipulation and for platform configuration, respectively. The former is defined as the end-effector position and orientation with respect to the platform, and the latter as the platform position and orientation in the base coordinates. Three approaches are proposed for the task decomposition. The approaches are also evaluated in terms of the displacements, from which an optimal approach can be selected.

Su, Chau↗

NASA NTRS1992

Shuttle flight experiment preliminary proposal: Demonstration of welding applications in space

In June 1991 work was initiated at MSFC on an end-effector for 'Robotic Assembly of Welded Truss Structures in Space'. The case for welded joint assembly on orbit was discussed in the 1991 SFFP Final Report 'D'. Data drawn from Aerobrake studies (supported by the ISAAC program) allowed the more detailed investigations that accompany a design with relatively concrete goals. This principle guides current efforts to develop scenarios that further demonstrate the utility of welding for space construction and/or repair.

Brewer, William V.↗

NASA NTRS1992

Inertial-space disturbance rejection for robotic manipulators

The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted on a 3-DOF platform is investigated. A control algorithm is designed to track the desired position and attitude of the end-effector in inertial space, subject to unknown disturbances in the platform axes. Conditions for the stability of the closed-loop system are derived. The performance of the controller is compared for step, sinusoidal, and random disturbances in the platform rotational axis and in the neighborhood of kinematic singularities.

Holt, Kevin↗

NASA NTRS1992

Ground Robotic Hand Applications for the Space Program study (GRASP)

This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time.

Grissom, William A.↗

NASA NTRS1991

New Prosthetic Devices

Using robotic techniques, NASA researchers have developed end-effectors designed to meet individual needs of hand and below the elbow amputees that are more efficient than the traditional hook.

Source record↗

NASA NTRS1991

Direct kinematics solution architectures for industrial robot manipulators: Bit-serial versus parallel

A Very Large Scale Integration (VLSI) architecture for robot direct kinematic computation suitable for industrial robot manipulators was investigated. The Denavit-Hartenberg transformations are reviewed to exploit a proper processing element, namely an augmented CORDIC. Specifically, two distinct implementations are elaborated on, such as the bit-serial and parallel. Performance of each scheme is analyzed with respect to the time to compute one location of the end-effector of a 6-links manipulator, and the number of transistors required.

Lee, J.↗