Search NASA⌕ Search

SEARCH · Search NASA

Results for “energetic performances”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Efficient connection of reactive shock wave profiles to reaction models

The future of energetic materials development, especially high-performance high explosives, demands new efficient and cost-effective experimental methods to understand the performance of new materials when only limited, development-scale quantities are available. Indeed, perhaps thousands of new molecules that have promising thermodynamic properties have been synthesized, only to be documented in the literature and never evaluated for their potential due to the cost of scaling up to produce quantities needed for traditional performance measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Energy Evolution from the Chromosphere to the Heliosphere in the 2021 October 28 Solar Eruption

We perform a detailed study of the energetics for a well-observed solar eruption and flare that occurred on 2021 October 28. This event included a GOES class X1.0 flare, a global extreme-UV (EUV) wave, and a coronal mass ejection (CME) that reached speeds of >2000 km s −1 . The event was observed from a variety of spacecraft in NASA’s Heliophysics System Observatory, including multiple missions near Earth, STEREO-A off the Sun-Earth line, and Solar Orbiter, near the Sun-Earth line at about 0.8 au. Using remote sensing, in situ observations, and in some cases scaling laws based on previous observations, we characterize the following quantities: free magnetic energy, energy in nonthermal electrons, energy in nonthermal ions, bolometric energy, energy deposited in the chromosphere, thermal energy radiated in the flare loops, energy dissipated by the EUV wave, CME kinetic and gravitational potential energy, CME energy flux in the heliosphere, and the energy partition in the CME shock. We find that the total energy released during the event is consistent with estimates of the pre-event stored magnetic energy, and the CME kinetic + potential energy dominates the energy partition.

solar coronal mass ejection shocks↗
NASA NTRS1973

Chemical propulsion - The old and the new challenges

The historical background concerning the application of liquid propellant rockets is considered. Progress to date in chemical liquid propellant rocket engines can be summarized as an increase in performance through the use of more energetic propellant combinations and increased combustion pressure. New advances regarding liquid propellant rocket engines are related to the requirement for reusability in connection with the development of the Space Shuttle.

Mccarty, J. P.↗
NASA NTRS1978

Imp 6 measurements in the distant polar cusp during substorms

High time-resolution data from the magnetic field, plasma, energetic particle, and VLF wave experiments performed aboard Imp 6 in a study of the distant dayside cusp during substorms are described. The cusp was studied when its location was slightly equatorward of its normal location and the geomagnetic dipole was tilted in the appropriate direction. The data support both reconnection and diffusion as methods of particle entry to the magnetosphere. The evidence (1) indicates an acceleration process to explain enhancements of 400 to 600-km/sec protons above their magnetosheath intensities, and (2) suggests convection of field lines over the polar cap as a means of explaining the lack of low-energy protons near the low-latitude boundary of the cusp. Magnetic field fluctuations, a perturbation vector, ion cyclotron waves, and an abrupt change in the intensity of both whistler waves and electrostatic waves are characterized.

Fairfield, D. H.↗
NASA NTRS1981

An asymptotic unsteady lifting-line theory with energetics and optimum motion of thrust-producing lifting surfaces

A low frequency unsteady lifting-line theory is developed for a harmonically oscillating wing of large aspect ratio. The wing is assumed to be chordwise rigid but completely flexible in the span direction. The theory is developed by use of the method of matched asymptotic expansions which reduces the problem from a singular integral equation to quadrature. The wing displacements are prescribed and the pressure field, airloads, and unsteady induced downwash are obtained in closed form. The influence of reduced frequency, aspect ratio, planform shape, and mode of oscillation on wing aerodynamics is demonstrated through numerical examples. Compared with lifting-surface theory, computation time is reduced significantly. Using the present theory, the energetic quantities associated with the propulsive performance of a finite wing oscillating in combined pitch and heave are obtained in closed form. Numerical examples are presented for an elliptic wing.

Ahmadi, A. R.↗
NASA NTRS1985

Rolling, slip and traction measurements on low modulus materials

Traction and wear tests were performed on six low modulus materials (LMM). Three different traction tests were performed to determine the suitability of the material for use as traction rollers. These were the rolling, slip and endurance traction tests. For each material the combination LMM on LMM and LMM on steel were evaluated. Rolling traction test were conducted to determine the load - velocity limits, the rolling traction coefficient of the materials and to establish the type of failures that would result when loading beyond the limit. It was found that in general a simple constant rolling traction coefficient was enough to describe the results of all the test. The slip traction tests revealed that the peak traction coefficients were considerably higher than for lubricated traction contacts. The endurance traction tests were performed to establish the durability of the LMM under conditions of prolonged traction. Wear measurements were performed during and after the test. Energetic wear rates were determined from the wear measurements conducted in the endurance traction tests. These values show that the roller wear is not severe when reasonable levels of traction are transmitted.

Tevaarwerk, J. L.↗
NASA NTRS2002

JANNAF 30th Propellant Development and Characterization Subcommittee Meeting

This volume, the first of three volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 30th Propellant Development & Characterization Subcommittee Meeting, held on 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. The papers presented herein reflect work performed in the areas of green energetic materials (GEM) development; liquid and gel propellant development; propellant surveillance and aging; and propellant chemistry test methods.

Moore, T. L.↗
DOE OSTI2023

Irradiation of ultrasonic sensors and adhesive couplants for application in light water reactor primary loop piping and components

The Electric Power Research Institute (EPRI) Nuclear Sector and US Department of Energy Light Water Reactor Sustainability Program are committed to engaging in research and development endeavors to address materials aging issues specific to long term operation of light water power reactors. To this effect, EPRI launched an industry initiative to develop nondestructive evaluation systems for online monitoring of existing cracks in light water reactor primary coolant loop piping and components. One of the goals of this initiative is to develop a sensor system (or systems) that can determine nondestructively if cracks are growing or arrested and, in the case of the former, to characterize their growth rates. A missing component of this initiative is an experimental assessment of how sensors and adhesive couplants will perform in service when exposed to chronic energetic neutron radiation, particularly at the primary coolant loop hot and cold leg dissimilar metal welds, which join the primary loop piping to the reactor pressure vessel and reside in the vicinity of the reactor core. The objective of this experimental study was to determine how ultrasonic transducers and adhesive couplants perform when exposed to irradiation in a test reactor to simulate and accelerate in-service exposure. Further, to achieve this objective, the signal stability of piezoelectric transducers and performance of adhesive couplants as a function of accumulated fast neutron fluence were characterized by collecting ultrasonic data in-situ during irradiation. Of particular interest were the ultrasonic signal quality and time decay of the amplitude of acoustic reflections as a function of fast neutron fluence. The results of the study showed that, of the 8 transducer/substrate sample assemblies tested, only 3 generated usable ultrasonic signals through the conclusion of the irradiation campaign. It was found that high temperature epoxy tends to ultrasonically couple the sensors to the substrates better than three types of refractory ceramic cements studied, as is supported by post irradiation examination. The results obtained through this experimental study will be utilized in the achievement of the overall goal of development of a sensor system to perform online monitoring of primary loop components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

High-Pressure Characterization of Two Stereoisomers of Tetranitroester Cyclobutane

The high-pressure behavior of two stereoisomeric cyclobutane nitric ester materials were studied at room temperature to near 25 GPa via Raman spectroscopy and powder X-ray diffraction. The materials investigated included [cis-trans-cis]- and [all-cis]-tetranitrate ester cyclobutanes. Over the course of these studies no evidence of polymorphism was observed, highlighting the stability of the ambient pressure crystal structures of the cyclobutanes to conditions near the detonation pressure of the material. Differences were observed between the bulk moduli of the two stereoisomers, suggesting potential tunability in materials response under dynamic conditions through the use of isomeric materials. Finally, such findings suggest that these high-performance materials can serve as TNT replacement in novel melt-castable energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of a munition.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1988

Energy transport by energetic electrons released during solar flares. II - Current filamentation and plasma heating

Two-dimensional electrostatic particle simulations are performed in order to investigate energy transport associated with the propagation of energetic electrons through a flaring flux tube. Results indicate that as the energetic electrons flow outward, a return current of ambient plasma electrons is drawn inward (to maintain quasi-neutrality) which can be spatially separate from the primary current carried by the energetic electrons. Return current electrons are shown to accumulate on either side of the acceleration region of the energetic electrons, and depletions of ambient plasma electrons develop in the return current regions. Plasma ions accelerate across the field lines to produce current closure or charge neutralization, achieving energies comparable to those of the energetic electrons.

Winglee, R. M.↗
DOE OSTI2022

Analysis of the ECH effect on EPM/AE stability in Heliotron J plasma using a Landau closure model

The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfvén eigenmodes (AEs) and energetic particle modes (EPMs) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The simulations reproduce the AE/EPM stability trends observed in the experiments as the electron temperature (T e ) increases, modifying the thermal plasma β, EP β and EP slowing-down time. Particularly, the $n/m = 1/2$ EPM and $2/4$ Global AE are stabilized in the low-bumpiness (LB) configuration due to an enhancement of the continuum, finite Larmor radius and e-i Landau damping effects as the thermal β increases. On the other hand, a larger ECH injection power cannot stabilize the AE/EPM in medium-bumpiness and high-bumpiness (HB) configurations because the damping effects are weaker compared to the LB case, unable to balance the further destabilization induced by an enhanced EP resonance as the EP slowing-down time and EP β increases with T e .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Saturation of fishbone instability through zonal flows driven by energetic particle transport in tokamak plasmas

Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-zonal flows nonlinear interplay are discussed in details. Numerical and analytical analyses identify the fishbone-induced EP redistribution as the dominant generation mechanism for zonal flows. The zonal flows modify the nonlinear dynamics of phase space zonal structures, which reduces the amount of EPs able to resonate with the mode, leading to an early fishbone saturation. Simulation results including zonal flows agree quantitatively with DIII-D experimental measurements of the fishbone saturation amplitude and EP transport, supporting this novel saturation mechanism by self- generated zonal flows. Moreover, the wave-particle mode-locking mechanism is shown to determine quantitatively the fishbone frequency down-chirping, as evident in GTC simulation results in agreement with predictions from analytical theory. Finally, the
fishbone-induced zonal flows are possibly responsible for the formation of an ion-ITB in the DIII-D discharge. Based on the low EP transport and the large zonal flow shearing rates associated with the fishbone instability in gyrokinetic simulations of the ITER scenario, it is conjectured that high performance scenarios could be designed in ITER burning plasmas through fishbone-induced ITBs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Imaging local luminescence variations in CdSe 0.1 Te 0.9 thin films grown by the colossal grain growth process

Clear visualization and understanding of luminescence properties of grain interiors and grain boundaries in polycrystalline thin-film photovoltaic materials are crucial to achieving high-performance solar cells. Luminescence-based measurements, for example, reveal sub-bandgap energetic disorder or impurity-related radiative transitions in these materials, and when performed in the absolute scale, they can show the extent of voltage-limiting non-radiative recombination. Here we use a hyperspectral imaging technique to investigate inter- and intra-grain photoluminescence variations in polycrystalline CdSe 0.1 Te 0.9 films made by the colossal grain growth process. We observe that grain boundaries show higher luminescence than grain interiors for all energies below the bandgap energy. Multiple distinct sub-bandgap defect transitions are detected and determined to be related to donor-acceptor pair impurities. A comparison of the excitation-intensity-dependent photoluminescence at the grain boundaries with grain interiors suggests that carrier concentration is higher at grain boundaries. This finding is supported by photoemission electron microscopy imaging of the films, showing approximately 70 meV upward energy shift in the band structure at the grain boundaries. Finally, we investigate a dramatic thermal quenching behavior related to the donor-acceptor pairs luminescence over a temperature range and use a rate-equation model to attribute it to the sudden redirection of the radiative recombination channels to non-radiative channels with increasing temperature.

14 SOLAR ENERGY↗
DOE OSTI2021

Altered Cardiac Energetics and Mitochondrial Dysfunction in Hypertrophic Cardiomyopathy

Background: Hypertrophic cardiomyopathy (HCM) is a complex disease partly explained by the effects of individual gene variants on sarcomeric protein biomechanics. At the cellular level, HCM mutations most commonly enhance force production, leading to higher energy demands. Despite significant advances in elucidating sarcomeric structure–function relationships, there is still much to be learned about the mechanisms that link altered cardiac energetics to HCM phenotypes. Here, we test the hypothesis that changes in cardiac energetics represent a common pathophysiologic pathway in HCM. Methods: We performed a comprehensive multiomics profile of the molecular (transcripts, metabolites, and complex lipids), ultrastructural, and functional components of HCM energetics using myocardial samples from 27 HCM patients and 13 normal controls (donor hearts). Results: Integrated omics analysis revealed alterations in a wide array of biochemical pathways with major dysregulation in fatty acid metabolism, reduction of acylcarnitines, and accumulation of free fatty acids. HCM hearts showed evidence of global energetic decompensation manifested by a decrease in high energy phosphate metabolites (ATP, ADP, and phosphocreatine) and a reduction in mitochondrial genes involved in creatine kinase and ATP synthesis. Accompanying these metabolic derangements, electron microscopy showed an increased fraction of severely damaged mitochondria with reduced cristae density, coinciding with reduced citrate synthase activity and mitochondrial oxidative respiration. These mitochondrial abnormalities were associated with elevated reactive oxygen species and reduced antioxidant defenses. However, despite significant mitochondrial injury, HCM hearts failed to upregulate mitophagic clearance. Conclusions: Overall, our findings suggest that perturbed metabolic signaling and mitochondrial dysfunction are common pathogenic mechanisms in patients with HCM. These results highlight potential new drug targets for attenuation of the clinical disease through improving metabolic function and reducing mitochondrial injury.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Impact of Stabilizing Cations on Lithium Intercalation in Tunneled Manganese Oxide Cathodes

Stabilizing cations such as K + , Ba 2+ , and Ag + are known to provide charge neutrality and enhance structural stability in low-cost tunneled manganese dioxide (MnO 2 ) cathodes for Li ion batteries. However, a fundamental understanding of the role of these cations in the electrochemical performance of tunneled MnO 2 cathodes remains unclear, especially at low stabilizing cation concentrations. Here, we employ density functional theory (DFT + U) calculations to reveal the impact of stabilizing potassium cation (K + ) concentration on the structural stability, electronic properties, and kinetics of lithium transport in 2 x 2 tunneled manganese oxide (α-K y Mn 8 O 16 , at y = 0, 1, and 2) battery cathodes during lithium intercalation. Specifically, we provide insights into the effect of K + ions on several critical factors governing the electrochemical storage performance of tunneled MnO2 cathodes, including (a) energetically favorable Li+ host sites, (ii) Li + and electron transport capabilities, (iii) optimal intercalation pathways, crystal distortion, microstructural stability, and tunneled-to-layer phase transformation as a function of lithium content, and (iv) cell output voltage profile. Interestingly, we find that low K + concentrations (y ≤ 1) yield partially cation-deficient tunnels in the MnO 2 cathode. Such unique tunnel structures in the cathode enable (a) low kinetic barriers for Li transport, (b) excellent thermodynamic stability of the tunneled structure even at a high Li + loading (up to ~ 0.625 Li/Mn), and (c) good electronic conductivity facilitated by Jahn-Teller distortions; all of which are critical for achieving high capacity batteries with enhanced rate capability. Additionally, these results provide perspectives to design low-cost transition metal oxide cathodes for high-performance Li-ion batteries with excellent cycle life.

25 ENERGY STORAGE↗
DOE OSTI2026

Primary biomolecular adsorption energetics of core–shell nanocomplexes: Implications for biological interactions

Molecular organization at the nano-bio interface governing the colloidal stability, reactivity, immune recognition, and drug delivery performance of nanoparticles remains difficult to predict. Quantifying the primary hydration energetics of biomolecule-coated nanomaterials can determine those interactions and provide a basis for engineered nanocarriers with tailored behavior in biological systems. Here, we measured the thermodynamics of water adsorption on patchy dry magnetite (Fe 3 O 4 ) nanoparticles coated with three model biomolecules, bovine serum albumin, potato starch, and lauric acid and compared these properties to the hydration energetics of the corresponding free dry biomolecules. The results demonstrate how the surface functionalization alters the hydrophilicity, the accessible hydrophilic surface, and the interaction potential of the nanocomplex surface with biological media. The protein coating increases the interaction potential of the surface of the nanocomplex. The weaker interaction potential of the polysaccharide coating and the relatively large hydrophilic surface area allow dynamic and reversible binding, while the fatty acid rearranges into a partial bilayer with very strong hydrophilicity. The findings establish the hydration enthalpy as a quantitative basis to determine and interpret nanoparticle interactions with proteins, membranes, and biological fluids, and provide a thermodynamic foundation for designing nanocarriers with predictable biological reactivity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Hydrogen separation with a graphenylene monolayer: Diffusion Monte Carlo study

Here, we performed fixed-node diffusion Monte Carlo (DMC) calculations to investigate structural and energetic properties of graphenylene (GPNL), a two-dimensional network of sp 2 -bonded carbon atoms with large near-circular pores, and its H 2 separation performance for gas mixtures. We have found that the energetic stability of a GPNL monolayer is comparable to that of γ-graphyne, as evidenced by its large cohesive energy of 6.755(3) eV/atom. Diffusion barriers of several gas molecules, including hydrogen, through a GPNL membrane were determined from the analysis of their adsorption energies depending on the adsorption distance, which led to our estimation for hydrogen selectivity with respect to other target molecules. DMC hydrogen selectivity of a GPNL monolayer was found to be exceptionally high at 300 K, as high as 10 10 –10 11 against CO and N 2 gases. This, along with high hydrogen permeance due to its generic pore structure, leads us to conclude that GPNL is a promising membrane to be used as a high-performance hydrogen separator from gas mixtures. We find that when compared to our DMC results, DFT calculations tend to overestimate H 2 selectivity, which is mostly due to their inaccurate description of short-range repulsive interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Variable hydrazine coordination modes from reactions with dichlorotris(triphenylphosphine)ruthenium(II)

The reactivity of the prominent ruthenium(II) catalyst and precursor, RuCl 2 (PPh 3 ) 3 , was explored with hydrazine and its derivatives. The reactions produced 6-coordinate ruthenium(II) products that bond with the hydrazine moiety in bridging (NH 2 NH 2 or NH 2 NHMe), end-on (NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ), or side-on (NH 2 NMe 2 ) fashions. The products have been characterized by single crystal X-ray diffraction and 31 P NMR spectroscopy. With NH 2 NH 2 , the dimeric product, [RuCl 2 (PPh 3 ) 2 ] 2 ($μ$-N 2 H 4 ) 2 , was formed under all conditions used. For other hydrazines, the reaction stoichiometry governed product formation to yield either bimetallic or monomeric products. When the RuCl 2 (PPh 3 ) 3 to hydrazine derivative ratio was 1:1 or lower, bimetallic complexes were formed while a 1:2 ratio produced monomeric compounds. The exception to the latter occurs with the production of the monomeric compound, RuCl 2 (PPh 3 ) 2 ($η$ 2 -NH 2 NMe 2 ), that forms employing a 1:1 ratio. In addition to stoichiometry, steric factors and hydrogen bonding played a significant role in dictating the bonding mode of hydrazines. The bimetallic complexes were further reacted to yield the corresponding monomeric products, adopting the form RuCl 2 (PPh 3 ) 2 (L) 2 (L = NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ). Reactions utilizing less than a 1:2 ratio of RuCl 2 (PPh 3 ) 3 to NH 2 NMe 2 produced a mixture of products that appear to be in equilibrium. In conclusion, FT calculations were performed to gain insight into the reaction energetics and molecular stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗