Search NASA⌕ Search

SEARCH · Search NASA

Results for “enzymatic conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Decontamination of Mixed Paper and Plastic Municipal Solid Waste Increases Low and High Temperature Conversion Yields

With the implementation of China’s Green Fence Policy and the following National Sword Policy, there is a need to divert previously accepted waste materials away from the landfill. Mixed plastic and paper wastes that are too contaminated to be economically recycled can be used for conversion into fuels and products. The effect of common contaminants present in waste streams must be determined to make municipal solid waste (MSW) a viable alternative to agricultural feedstocks for conversion. In this study, MSW was sourced from a dual stream materials recovery facility (MRF) in Emmet County, Michigan and characterized via mass balance. The most common contaminants in mixed paper and plastic were quantified and targeted for decontamination when mixed paper was explored for low temperature conversion pathways and plastics for high temperature conversion pathways. Ink, stickies, and plastic contamination were sorted out of the mixed paper stream and did not have an impact on sugar yields during enzymatic hydrolysis (EH). Although no improvement in yield was found, it was noted that copy paper within the mixed paper stream had an elevated pH and higher concentration of fermentation inhibitors, suggesting that intrinsic properties of some paper types may not be ideal for EH and fermentation conversion. Dilute alkaline pretreatment and mechanical refining of mixed paper increased the EH yield of mixed paper, suggesting this previously established process could be used as a decontamination method. “Dirt” and particulates were washed from mixed plastic using either an aqueous detergent or a non-aqueous chemical washing method. Liquid oil yields were increased during microwave assisted fast pyrolysis. All decontamination techniques met the cost target of less than $30/dry ton with plastic decontamination ranging from $18.16 to $24.81/dry ton. Because dilute alkaline pre-treatment and mechanical refining is considered part of the conversion process, the decontamination cost during feedstock preprocessing was considered $0/dry ton.

09 BIOMASS FUELS↗
DOE OSTI2023

Virtual Engineering of Low-Temperature Conversion

In this work, we present the development of an overarching software framework and supporting multiphysics models to simulate the end-to-end process of biomass conversion. This virtual engineering (VE) software is designed with the goal of accelerating research and development and reducing risk for market-relevant biomass conversion processes. We currently support multiple models, computing paradigms, and fidelities representing the steps of feedstock pretreatment, enzymatic hydrolysis, and bioconversion. Although this VE approach was developed to support a biomass workflow, we have designed each component in a way that allows us to easily support new domains, unit models, and feedstocks. We begin by presenting the user-facing aspects of the VE software and highlight how simulated elements are defined and linked by VE functions. We then present an overview of the high-fidelity computational fluid dynamics (CFD) models developed to support our target domain before segueing into our efforts to develop accurate and fast surrogate models, capturing the salient outcomes from the CFD simulations in a significantly less computationally demanding manner. We then present how VE calculations interface with a commercial techno-economic analysis software, Aspen Plus. We conclude by presenting VE case studies that leverage these methods and discuss how our methods can be extended to support a wide variety of accelerated biofuel commercialization pathways in the future.

biofuel↗
DOE OSTI2021

BETO 2021 Peer Review - Continuous Enzymatic Hydrolysis Development (CEHD) WBS 2.4.1.101

The Continuous Enzymatic Hydrolysis Development (CEHD) project aims to reduce the cost and commercialization scale-up risks of biorefinery sugar-lignin production through development of a deployable continuous enzymatic hydrolysis (CEH) process. Through the use of external cross flow membrane filtration loops coupled to enzymatic hydrolysis (EH) reactors, pretreated biomass solids and enzymes are retained for reaction while solubilized product sugars are removed in situ, with high extents of conversion achieved through a series of reactor-membrane unit stages. The CEHD project is focused on advancing CEH as a transformational, process-intensified, lower-cost method for producing soluble clarified biomass sugars and insoluble lignin-rich streams than traditional batch enzymatic hydrolysis (BEH). The project's primary objective is to reduce the cost of CEH to be compellingly lower than conventional BEH, 10% lower in year 1 and 20% lower in year 3 (end of project). A related objective is to expand CEH's operating envelope to increase process efficiency. Through more thorough de-risking and demonstration of CEH, in conjunction with building a suite of modeling and optimization tools that allow for more facile rigorous in silico evaluation of novel CEH designs and modalities, this project intends to elevate industry interest in adopting CEH as an improvement over conventional batch processing. This project was merit reviewed in FY20. It's now in its first year of a new 3-year plan spanning FY21-FY23.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Enhanced medium chain length-polyhydroxyalkanoate production by co-fermentation of lignin and holocellulose hydrolysates

Biological lignin conversion to medium chain length-polyhydroxyalkanoates (mcl-PHA) has recently emerged as an attractive alternative to petroleum-based plastics due to the renewable nature of lignin and the value-added applications of mcl-PHA. Previous reports suggested that addition of limited glucose can improve mcl-PHA accumulation in Pseudomonas putida KT2440 grown in lignin substrates. Herein, we propose a biorefinery process to systematically release lignin and sugars from lignocellulosic biomass and evaluate the potential of co-utilization of all biomass components for conversion to mcl-PHA. Our results indicate that a sequential treatment composed of acid pretreatment, enzymatic hydrolysis and alkaline treatment produces a suitable lignin stream for mcl-PHA production in engineered P. putida. In addition, the PHA titer could be increased by 71% when the lignin stream (AH) was combined with the enzymatic hydrolysate (EH) at a ratio of 75 : 25. Higher ratios of EH : AH negatively affect mcl-PHA accumulation as well as mixtures with sugars from the acid hydrolysate. The optimization of the fermentation conditions, including the inoculum (OD 600 ) and substrate (soluble solid content (SSC)), was carried out by a central composite design. The optimal conditions were achieved at OD 600 = 2.17 and SSC = 68.28 g L –1 . Under these conditions, the titer increased 4.3 fold, achieving a mcl-PHA production of 1.38 g L –1 . Lignin characterization before and after fermentation by nuclear magnetic resonance and gas chromatography showed that p-coumarates were mainly consumed during the fermentation for mcl-PHA production. Overall, this biorefinery strategy allowed us to increase mcl-PHA production by utilizing the different lignocellulosic fractions. Unlike previous studies, no model substrates were utilized at any stage of the fermentation process, representing a step forward towards process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evaluation of engineered low-lignin poplar for conversion into advanced bioproducts

Lignocellulosic resources are promising feedstocks for the manufacture of bio-based products and bioenergy. However, the inherent recalcitrance of biomass to conversion into simple sugars currently hinders the deployment of advanced bioproducts at large scale. Lignin is a primary contributor to biomass recalcitrance as it protects cell wall polysaccharides from degradation and can inhibit hydrolytic enzymes via non-productive adsorption. Several engineering strategies have been designed to reduce lignin or modify its monomeric composition. For example, expression of bacterial 3-dehydroshikimate dehydratase (QsuB) in poplar trees resulted in a reduction in lignin due to redirection of metabolic flux toward 3,4-dihydroxybenzoate at the expense of lignin. This reduction was accompanied with remarkable changes in the pools of aromatic compounds that accumulate in the biomass. The impact of these modifications on downstream biomass deconstruction and conversion into advanced bioproducts was evaluated in the current study. Using ionic liquid pretreatment followed by enzymatic saccharification, biomass from engineered trees released more glucose and xylose compared to wild-type control trees under optimum conditions. Fermentation of the resulting hydrolysates using Rhodosporidium toruloides strains engineered to produce α-bisabolene, epi-isozizaene, and fatty alcohols showed no negative impact on cell growth and yielded higher titers of bioproducts (as much as + 58%) in the case of QsuB transgenics trees. Our data show that low-recalcitrant poplar biomass obtained with the QsuB technology has the potential to improve the production of advanced bioproducts.

09 BIOMASS FUELS↗
DOE OSTI2025

Spatially resolved charge-transfer kinetics at the quantum dot–microbe interface using fluorescence lifetime imaging microscopy

Integrating the optoelectronic properties of quantum dots (QDs) with biological enzymatic systems to form microbe-semiconductor biohybrids offers promising prospects for both solar-to-chemical conversion and light-modulated biochemical processes. Developing these nano–bio hybrid systems necessitates a deep understanding of charge-transfer dynamics at the nano–bio interface. Photoexcited carrier transfer from QDs to microbes is driven by complex interactions, with emerging insights into the relevant thermodynamic and kinetic factors. The heterogeneities of both microbes and QD ensembles pose significant challenges in mechanistic understanding, which is critical for designing advanced nano–bio hybrids. We used fluorescence lifetime imaging microscopy to analyze charge transfer between a CdSe QD film andShewanella oneidensismicrobes. We correlated the spatiotemporal fluorescence data with an analytical model. Our analysis revealed two distinct distributions of QD de-excitation pathways. The characteristics of these distributions: 1) a faster transfer rate ( k ¯ E T 1 = 1.5 10 9 s - 1 ), with a lower acceptor number ( N ¯ a 1 = 0.03 ) and 2) a slower transfer rate ( k ¯ E T 2 = 4.1 10 8 s - 1 ) with a higher acceptor number ( N ¯ a 2 = 0.18 ). We assign these distributions to the indirect and direct electron transfer mechanisms, respectively. Our findings demonstrate how spectroscopic imaging can uncover fundamental electron transfer mechanisms at complex interfaces, offering valuable design principles for future nano–bio hybrids.

Science & Technology - Other Topics↗
NASA NTRS2011

Reactive Oxygen Species on the Early Earth and Survival of Bacteria

An oxygen-rich atmosphere appears to have been a prerequisite for complex, multicellular life to evolve on Earth and possibly elsewhere in the Universe. However it remains unclear how free oxygen first became available on the early Earth. A potentially important, and as yet poorly constrained pathway, is the production of oxygen through the weathering of rocks and release into the near-surface environment. Reactive Oxygen Species (ROS), as precursors to molecular oxygen, are a key step in this process, and may have had a decisive impact on the evolution of life, present and past. ROS are generated from minerals in igneous rocks during hydrolysis of peroxy defects, which consist of pairs of oxygen anions oxidized to the valence state -1 and during (bio) transformations of iron sulphide minerals. ROS are produced and consumed by intracellular and extracellular reactions of Fe, Mn, C, N, and S species. We propose that, despite an overall reducing or neutral oxidation state of the macroenvironment and the absence of free O2 in the atmosphere, organisms on the early Earth had to cope with ROS in their microenvironments. They were thus under evolutionary pressure to develop enzymatic and other defences against the potentially dangerous, even lethal effects of oxygen and its derived ROS. Conversely it appears that microorganisms learned to take advantage of the enormous reactive potential and energy gain provided by nascent oxygen. We investigate how oxygen might be released through weathering. We test microorganisms in contact with rock surfaces and iron sulphides. We model bacteria such as Deionococcus radiodurans and Desulfotomaculum, Moorella and Bacillus species for their ability to grow or survive in the presence of ROS. We examine how early Life might have adapted to oxygen.

Balk, Melikea↗
DOE OSTI2023

Characterization of a novel aromatic substrate-processing microcompartment in Actinobacteria

ABSTRACT We have discovered a new cluster of genes that is found exclusively in the Actinobacteria phylum. This locus includes genes for the 2-aminophenol meta -cleavage pathway and the shell proteins of a bacterial microcompartment (BMC) and has been named aromatics (ARO) for its putative role in the breakdown of aromatic compounds. In this study, we provide details about the distribution and composition of the ARO BMC locus and conduct phylogenetic, structural, and functional analyses of the first two enzymes in the catabolic pathway: a unique 2-aminophenol dioxygenase, which is exclusively found alongside BMC shell genes in Actinobacteria, and a semialdehyde dehydrogenase, which works downstream of the dioxygenase. Genomic analysis reveals variations in the complexity of the ARO loci across different orders. Some loci are simple, containing shell proteins and enzymes for the initial steps of the catabolic pathway, while others are extensive, encompassing all the necessary genes for the complete breakdown of 2-aminophenol into pyruvate and acetyl-CoA. Furthermore, our analysis uncovers two subtypes of ARO BMC that likely degrade either 2-aminophenol or catechol, depending on the presence of a pathway-specific gene within the ARO locus. The precise precursor of 2-aminophenol, which serves as the initial substrate and/or inducer for the ARO pathway, remains unknown, as our model organism Micromonospora rosaria cannot utilize 2-aminophenol as its sole energy source. However, using enzymatic assays, we demonstrate the dioxygenase’s ability to cleave both 2-aminophenol and catechol in vitro , in collaboration with the aldehyde dehydrogenase, to facilitate the rapid conversion of these unstable and toxic intermediates. IMPORTANCE Bacterial microcompartments (BMCs) are proteinaceous organelles that are widespread among bacteria and provide a competitive advantage in specific environmental niches. Studies have shown that the genetic information necessary to form functional BMCs is encoded in loci that contain genes encoding shell proteins and the enzymatic core. This allows the bioinformatic discovery of BMCs with novel functions and expands our understanding of the metabolic diversity of BMCs. ARO loci, found only in Actinobacteria, contain genes encoding for phylogenetically remote shell proteins and homologs of the meta -cleavage degradation pathway enzymes that were shown to convert central aromatic intermediates into pyruvate and acetyl-CoA in gamma Proteobacteria. By analyzing the gene composition of ARO BMC loci and characterizing two core enzymes phylogenetically, structurally, and functionally, we provide an initial functional characterization of the ARO BMC, the most unusual BMC identified to date, distinctive among the repertoire of studied BMCs.

2-AP 1,6-dioxygenase↗
DOE OSTI2022

The role of binding modules in enzymatic poly(ethylene terephthalate) hydrolysis at high-solids loadings

In nature, enzymes that deconstruct biological polymers, such as cellulose and chitin, often exhibit multi-domain architectures, comprising a catalytic domain and a non-catalytic binding module; the latter serves to increase the enzyme concentration at the substrate surface. This multi-domain architecture has been shown to improve the hydrolysis of poly(ethylene terephthalate) (PET) using engineered cutinase enzymes. Here, we examine the role of accessory binding modules at industrially relevant PET solids loadings necessary for cost-effective enzymatic recycling. Using a thermostable variant of leaf compost cutinase (LCC), we produced synthetic fusion constructs of LCC with five type A carbohydrate-binding modules (CBMs). At solids loadings below 10 wt%, the CBMs improve aromatic monomer yield from PET, but above this threshold, conversion extents up to 97% are reached with no added benefits from the presence of CBM fusions. This suggests that fusion constructs with the herein studied CBMs are not necessary for industrial enzymatic PET recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Green pretreatment strategies for enhanced microbial lipid fermentation and synergistic high-quality lignin recovery for next-generation integrated biorefineries

Miscanthus × giganteus (Mxg) is a warm-season perennial grass being commercialized as a biomass feedstock for temperate farms. Three process strategies were compared for converting Mxg into single-cell oil and extracted lignin intermediates, as hydrothermal (HT) processing and two natural deep eutectic solvents (NADES), ChCl:LA (choline chloride:lactic acid) and ChCl:Gly (choline chloride:glycerol). Pretreatments were performed at 10% and 50% solids loading at 140 °C, 2 h; HT: 190 °C, 10 min. Enzymatic hydrolysates, generated at 10% solids using washed and unwashed biomass, were evaluated for microbial lipid production. Maximum glucose conversions from washed biomass reached 83.5% (ChCl:LA), 52.7% (ChCl:Gly), and 74.0% (HT). Remarkably, NADES-derived hydrolysates effectively replaced refined sugars for the cultivation of the oleaginous yeast Rhodotorula toruloides, achieving ∼51% higher biomass (OD 90.7) and lipid titers of 19.36 g/L within 45 h using a two-stage fermentation strategy. Lipid contents ranged from 34.5–44.5% dry weight, demonstrating reduced reliance on purified sugars. Beyond carbohydrate valorization, ChCl:LA pretreatment enabled high-purity lignin recovery (>89%) in a lignin-first strategy. Structural analyses (2D-HSQC and ³¹P NMR) showed syringyl (78.15%), guaiacyl (15.15%), and p-hydroxyphenyl (6.41%) units, with higher phenolic hydroxyl content (0.91 mmol/g) and a lower S/G ratio (0.19) than HT lignin (0.87 mmol/g, S/G 0.22). These attributes favor downstream lignin depolymerization into low-molecular-weight aromatics. Overall, NADES pretreatment simultaneously enhances microbial lipid yields and recovers high-quality lignin, advancing the economic feasibility of renewable diesel and sustainable aviation fuel (SAF) production from bioenergy crops within an integrated biorefinery framework.

2D HSQC↗
DOE OSTI2023

Genome engineering allows selective conversions of terephthalaldehyde to multiple valorized products in bacterial cells

Deconstruction of polyethylene terephthalate (PET) plastic waste generates opportunities for valorization to alternative products. We recently designed an enzymatic cascade that could produce terephthalaldehyde (TPAL) from terephthalic acid. Here, we showed that the addition of TPAL to growing cultures of Escherichia coli wild-type strain MG1655 and an engineered strain for reduced aromatic aldehyde reduction (RARE) strain resulted in substantial reduction. We then investigated if we could mitigate this reduction using multiplex automatable genome engineering (MAGE) to create an E. coli strain with 10 additional knockouts in RARE. Encouragingly, we found this newly engineered strain enabled a 2.5-fold higher retention of TPAL over RARE after 24 h. We applied this new strain for the production of para-xylylenediamine (pXYL) and observed a 6.8-fold increase in pXYL titer compared with RARE. Altogether, our study demonstrates the potential of TPAL as a versatile intermediate in microbial biosynthesis of chemicals that derived from waste PET.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Virtual Engineering Software Framework for Integrated Biomass Conversion Modeling

This presentation covers the design and implementation of a software tool to systematically connect computational models of unit operations to simulate an integrated process of low-temperature conversion of biomass to fuel. This virtual engineering (VE) software was designed with the overarching goal of connecting unit models written in various programming languages and requiring different computational resources within a single, flexible framework. The models and features currently considered for the VE library include mechanistic models for pretreatment, enzymatic hydrolysis, and aerobic bioreaction; high-fidelity computational fluid dynamics (CFD) simulations for enzymatic hydrolysis and aerobic bioreaction; and the capability to perform techno-economic analyses (TEA) using Aspen Plus, a commercial software package. The CFD models require access to high-performance computing (HPC) resources, so in addition to handling multiple programming languages and interfaces, the VE software must also be capable of interacting with an HPC scheduler to submit, run, and post-process jobs. Using the Python programming language, a new VE software package has been developed that contains functionality to manage the input-output communication between various unit models, schedule simulations to run on NREL's HPC and analyze those results, and interface with existing TEA software workflows. A Jupyter-notebook GUI was also created to solicit user input and provide documentation. In cases where multiple models for a particular unit-operation exist, selection between models is accomplished through a simple checkbox, with the appropriate inputs and outputs being parsed and converted seamlessly in the background. Each operation makes use of a different programming language, but the flow of information from pretreatment to enzymatic hydrolysis to bioreaction is managed with an intuitive, centralized file-communication strategy. In this talk, the programming approach and implementation details of the notebook are presented for multiple possibilities of the conversion process, including a demonstration of the ability to manage HPC resources. Additionally, an example of a sensitivity study of treatment parameters governing the overall conversion outcome is shown which highlights the ease of defining new problems using the VE Notebook workflow and leads into a discussion of ongoing work to enable outer-loop optimization studies.

biofuel↗
DOE OSTI2023

Engineering a new-to-nature cascade for phosphate-dependent formate to formaldehyde conversion in vitro and in vivo

Formate can be envisioned at the core of a carbon-neutral bioeconomy, where it is produced from CO 2 by (electro-)chemical means and converted into value-added products by enzymatic cascades or engineered microbes. A key step in expanding synthetic formate assimilation is its thermodynamically challenging reduction to formaldehyde. Here, we develop a two-enzyme route in which formate is activated to formyl phosphate and subsequently reduced to formaldehyde. Exploiting the promiscuity of acetate kinase and N-acetyl-γ-glutamyl phosphate reductase, we demonstrate this phosphate (P i )-based route in vitro and in vivo. We further engineer a formyl phosphate reductase variant with improved formyl phosphate conversion in vivo by suppressing cross-talk with native metabolism and interface the P i route with a recently developed formaldehyde assimilation pathway to enable C2 compound formation from formate as the sole carbon source in Escherichia coli. The P i route therefore offers a potent tool in expanding the landscape of synthetic formate assimilation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Radiation-induced genomic instability

Quantitative assessment of the heritable somatic effects of ionizing radiation exposures has relied upon the assumption that radiation-induced lesions were 'fixed' in the DNA prior to the first postirradiation mitosis. Lesion conversion was thought to occur during the initial round of DNA replication or as a consequence of error-prone enzymatic processing of lesions. The standard experimental protocols for the assessment of a variety of radiation-induced endpoints (cell death, specific locus mutations, neoplastic transformation and chromosome aberrations) evaluate these various endpoints at a single snapshot in time. In contrast with the aforementioned approaches, some studies have specifically assessed radiation effects as a function of time following exposure. Evidence has accumulated in support of the hypothesis that radiation exposure induces a persistent destabilization of the genome. This instability has been observed as a delayed expression of lethal mutations, as an enhanced rate of accumulation of non-lethal heritable alterations, and as a progressive intraclonal chromosomal heterogeneity. The genetic controls and biochemical mechanisms underlying radiation-induced genomic instability have not yet been delineated. The aim is to integrate the accumulated evidence that suggests that radiation exposure has a persistent effect on the stability of the mammalian genome.

NASA Discipline Radiation Health↗
DOE OSTI2026

Feedstock/Pretreatment Screening for Bioconversion of Sugars and Lignin Residues

This project will conduct biomass deconstruction (pretreatment and enzymatic saccharification) on two representative biomass feedstocks and four different pretreatment processes, including three high temperature steam/chemical pretreatments and one low temperature chemical/mechanical pretreatment. A third biomass feedstock will undergo biomass deconstruction with three different pretreatment processes, including two high temperature chemical pretreatments and one low temperature chemical/mechanical pretreatment. Several pretreatment conditions will be performed in a screening study using NLR pilot-scale pretreatment equipment to generate a range of pretreated biomass substrates. A selected number of these substrates will be chosen for enzymatic saccharification evaluation, based on standard compositional analysis of the pretreated substrates as a primary indicator of pretreatment efficacy. Resulting enzymatic hydrolysis slurries will be analyzed to determine overall biomass sugar yields. Additional compositional analysis will be performed to determine oligomeric sugar composition and structure, to analyze structural characteristics of solids fractions on native, pretreated, and enzymatically saccharified biomass residues for one of the biomass feedstocks, corn stover. The enzymatically saccharified materials will undergo 2,3-butanediol fermentation in a shaker flask as bench scale. Using relevant process performance data collected in these various conversion steps, technoeconomic analysis activities will be performed to compare the economic potential of the various biomass feedstock and pretreatment processes and to identify key economic drivers and sustainability metrics.

09 BIOMASS FUELS↗
DOE OSTI2026

Challenges and Opportunities in the Enzymatic Recycling of Nylons

Enzymatic depolymerization has the potential to contribute to nylon waste recycling. However, the implementation of a viable industrial process still lags far behind progress in enzymatic polyester recycling. Here we review the current biocatalytic nylon recycling landscape, highlighting biochemical, structural, and materials science barriers that currently limit depolymerization extents. We detail efforts to identify, engineer, and characterize new nylon depolymerases, where currently even the best biocatalysts rarely exceed ~1 wt% conversion of solid polymer to products. Based on our analyses, we suggest that limited substrate accessibility due to substrate crystallinity and hydrogen bonding, rather than intrinsic enzyme inefficiency or instability, is the primary bottleneck to enhanced depolymerization. Guided by successes in polyester enzymatic recycling, we outline a research roadmap combining nylonase engineering with polymer pretreatment, chemo-enzymatic cascades, and process analyses to accelerate development of viable enzymatic nylon recycling processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Cell Wall Compositions of Sorghum bicolor Leaves and Roots Remain Relatively Constant Under Drought Conditions

Renewable fuels are needed to replace fossil fuels in the immediate future. Lignocellulosic bioenergy crops provide a renewable alternative that sequesters atmospheric carbon. To prevent displacement of food crops, it would be advantageous to grow biofuel crops on marginal lands. These lands will likely face more frequent and extreme drought conditions than conventional agricultural land, so it is crucial to see how proposed bioenergy crops fare under these conditions and how that may affect lignocellulosic biomass composition and saccharification properties. We found that while drought impacts the plant cell wall of Sorghum bicolor differently according to tissue and timing of drought induction, drought-induced cell wall compositional modifications are relatively minor and produce no negative effect on biomass conversion. This contrasts with the cell wall-related transcriptome, which had a varied range of highly variable genes (HVGs) within four cell wall-related GO categories, depending on the tissues surveyed and time of drought induction. Further, many HVGs had expression changes in which putative impacts were not seen in the physical cell wall or which were in opposition to their putative impacts. Interestingly, most pre-flowering drought-induced cell wall changes occurred in the leaf, with matrix and lignin compositional changes that did not persist after recovery from drought. Most measurable physical post-flowering cell wall changes occurred in the root, affecting mainly polysaccharide composition and cross-linking. This study couples transcriptomics to cell wall chemical analyses of a C4 grass experiencing progressive and differing drought stresses in the field. As such, we can analyze the cell wall-specific response to agriculturally relevant drought stresses on the transcriptomic level and see whether those changes translate to compositional or biomass conversion differences. Our results bolster the conclusion that drought stress does not substantially affect the cell wall composition of specific aerial and subterranean biomass nor impede enzymatic hydrolysis of leaf biomass, a positive result for biorefinery processes. Coupled with previously reported results on the root microbiome and rhizosphere and whole transcriptome analyses of this study, we can formulate and test hypotheses on individual gene candidates’ function in mediating drought stress in the grass cell wall, as demonstrated in sorghum.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Investigation of a Lignin-Based Deep Eutectic Solvent Using p -Hydroxybenzoic Acid for Efficient Woody Biomass Conversion

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). In this paper, we first report an effective pretreatment of woody biomass using a novel hardwood lignin-based DES prepared from p -hydroxybenzoic acid (PB) and choline chloride (ChCl), which are used as the hydrogen bond donor and acceptor, respectively. The impacts of the ChCl-PB DES on structural properties and enzymatic hydrolysis of poplar wood were comprehensively evaluated. The performance of ChCl-PB DES was also compared with two other DESs with p -coumaric acid (PCA) and 4-hydroxybenzaldehyde (PHA) as the hydrogen bond donors, which have been successfully applied to herbaceous biomass conversion in previous studies. The results showed that hemicellulose and lignin were effectively fractionated during the proposed ChCl-PB DES pretreatment under a relatively mild temperature. The ChCl-PB DES pretreatment resulted in up to 69% of delignification, and the pretreated poplar residues had over 90% of glucose yield by a 72 h-enzymatic hydrolysis. Transformation of poplar biomass during the DES pretreatment was evaluated by gel permeation chromatography (GPC), two-dimensional heteronuclear single quantum coherence (2D-HSQC), and 31 P nuclear magnetic resonance (NMR) spectroscopies. The recovered lignin showed relatively high purity, narrow molecular weight distribution (PDI < 1.6), and relatively low molecular weight (~1400 g/mol for M w ). A sustainable process was achieved by recycling DES as well as the utilization of PB, which is a producible aromatic compound from hardwood lignin, for the proposed DES formation in the system. This study indicates that the proposed novel DES with a hardwood lignin-based PB compound is a promising pretreatment solvent to achieve an economically feasible biomass conversion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗