Search NASA⌕ Search

SEARCH · Search NASA

Results for “experiment 3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CO 2 utilization in built environment via the P CO 2 swing carbonation of alkaline solid wastes with different mineralogy

Carbon mineralization to solid carbonates is one of the reaction pathways that can not only utilize captured CO 2 but also potentially store it in the long term. In this study, the dissolution and carbonation behaviors of alkaline solid wastes (i.e., waste concrete) was investigated. Concrete is one of the main contributors to a large carbon emission in the built environment. Thus, the upcycling of waste concrete via CO 2 utilization has multifaceted environmental benefits including CO 2 emission reduction, waste management and reduced mining. Unlike natural silicate minerals such as olivine and serpentine, alkaline solid wastes including waste concrete are highly reactive, and thus, their dissolution and carbonation behaviors vary significantly. Here, both conventional acid (e.g., hydrochloric acid) and less studied carbonic acid (i.e., CO 2 saturated water) solvent systems were explored to extract Ca from concrete. Non-stoichiometric dissolution behaviors between Ca and Si were confirmed under far-from-equilibrium conditions (0.1 wt% slurry density), and the re-precipitation of the extracted Si was observed at near-equilibrium conditions (5 wt% slurry density), when the Ca extraction was performed at a controlled pH of 3. These experiments, with a wide range of slurry densities, provided valuable insight into Si re-precipitation phenomena and its effect on the mass transfer limitation during concrete dissolution. Next, the use of the partial pressure of CO 2 for the pH swing carbon mineralization process was investigated for concrete, and the results were compared to those of Mg-bearing silicate minerals. In the P CO 2 swing process, the extraction of Ca was significantly limited by the precipitation of the carbonate phase (i.e., calcite), since CO 2 bubbling could not provide a low enough pH condition for concrete–water–CO 2 systems. Furthermore, this study showed that the two-step carbon mineralization via P CO 2 swing, that has been developed for Mg-bearing silicate minerals, may not be viable for highly reactive Ca-bearing silicate materials (e.g., concrete). The precipitated calcium carbonate (PCC) derived from waste concrete via a pH swing process showed very promising results with a high CO 2 utilization potential as an upcycled construction material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Illuminating the mechanistic impacts of an Fe-quaterpyridine functionalized crystalline poly(triazine imide) semiconductor for photocatalytic CO 2 reduction

The strategy of incorporating earth-abundant catalytic centers into light-absorbing architectures is desirable from the viewpoint of low cost, low toxicity, and versatility for activating small molecules to produce solar-based fuels. Herein, we show that an Fe-quaterpyridine molecular catalyst can be anchored to a light-absorbing, crystalline, carbon nitride (PTI), to yield a molecular-catalyst/material hybrid, Fe-qpy-PTI, capable of facilitating CO 2 reduction to CO selectively (up to ∼97–98%) in aqueous solution under low-intensity light irradiation. This hybrid material leverages the ability of the Fe-qpy catalyst to bind CO 2 upon a one-electron reduction, as achieved by transfer of excited electrons from the carbon-nitride semiconductor. At a low incident power density of only 50 mW cm −2 , the catalytic activity of the hybrid material was measured across a range of catalyst loadings from 0.1–3.8 wt%, yielding CO rates of up to 596 μmol g −1 h −1 for a 3.8 wt% loading during a 3 h experiment. Over the course of 8 h, the hybrid material attained a CO evolution rate of 608 μmol g −1 h −1 and 305 turnovers for a TOF of ∼38 h −1 and an apparent quantum yield of 2.6%. Higher light intensities provided an initial increase in activity but negatively impacted photocatalytic rates with time, with an AQY of 0.6% at 150 mW cm −2 and 0.4% at 250 mW cm −2 . Transient absorption spectroscopy results showed electron survival probabilities consistent with the trends in observed product rates. Computational modeling was also used to evaluate and understand the mechanistic pathway of the high product selectivity for CO versus H 2 . These results thus help unveil key factors for leveraging the mechanistic understanding of molecular catalysts for CO 2 reduction for pairing with light absorbing semiconductors and establishing optimal conditions to attain maximal rates in aqueous solution.

McGuigan, Scott [Baylor University, Waco, TX (Unit↗
DOE OSTI2021

Radium Dial Workers: Back to the Future

This report reviews the history of the radium dial workers in the United States, summarizes the scientific progress made since the last evaluation in the early 1990s, and discusses current progress in updating the epidemiologic cohort and applying new dosimetric models for radiation risk assessment. The discoveries of radiation and radioactivity led quickly to medical and commercial applications at the turn of the 20th century, including the development of radioluminescent paint, made by combining radium with phosphorescent material and adhesive. Workers involved with the painting of dials and instruments included painters, handlers, ancillary workers, and chemists who fabricated the paint. Dial painters were primarily women and, prior to the mid to late 1920s, would use their lips to give the brush a fine point, resulting in high intakes of radium. The tragic experience of the dial painters had a significant impact on industrial safety standards, including protection measures taken during the Manhattan Project. The dial workers study has formed the basis for radiation protection standards for intakes of radionuclides by workers and the public. The mortality experience of 3,276 radium dial painters and handlers employed between 1913-1949 is being determined through 2019. The last epidemiologic follow-up was 30 years ago when most of these workers were still alive. Nearly 65% were born before 1920, 37.5% were teenagers when first hired, and nearly 50% were hired before 1930 when the habit of placing brushes in mouths essentially stopped. Comprehensive dose reconstruction techniques are being applied to estimate organ doses for each worker related to the intake of 226Ra, 228Ra, and associated photon exposures. Time dependent dose-response analyses will estimate lifetime risks for specific causes of death. The study of radium dial workers is part of the Million Person Study of low-dose health effects that is designed to evaluate radiation risks among healthy American workers and veterans. Despite being one of the most important and influential radiation effects studies ever conducted, shifting programmatic responsibilities and declining funding led to the termination of the radium program of studies in the early 1990s. Renewed interest and opportunity have arisen. With scientific progress made in dosimetric methodology and models, the ability to perform a study over the entire life span, and the potential applicability to other scenarios such as medicine, environmental contamination and space exploration, the radium dial workers have once again come to the forefront.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

Integrating Spatial and Ethnographic Methods for Resilience Research: A Thick Mapping Approach for Hurricane Maria in Puerto Rico

Hurricane Maria left unprecedented impacts on Puerto Rican communities, leaving some without infrastructure services and unable to communicate with family for several months. Here, to understand the forms of community-level resilience that emerged while hard infrastructure systems took time recover, this article (1) abductively explores resilience as an emergent phenomenon of complex adaptive systems; (2) identifies subsequent forms of social capital, local adaptive capacities, and manifestations of quantifiable variables, such as infrastructure performance, in community experiences; and (3) demonstrates a framework to integrate disparate methodologies for resilience assessments via a multiplicity of mappings of space and place. We combine ethnographic and geospatial methods into an interactive GeoApp for analysis using participant-coded narratives and a series of geospatial indicators as a thick map. Thick mapping facilitates quantitative and qualitative data analysis at several scales, while enabling qualitative query of collected narratives. Results highlight local innovation, community bonding and bridging, and nuances in the role of public institutions as emergent elements of resilience. The thick map shows how top-down assessments can be augmented by thick data and how multiple framings can be anchored in the same system or place. These findings are important to inform and integrate community-oriented and technocentric solutions toward resilience-enhancing measures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Quantum dynamics in strongly driven random dipolar magnets

The random dipolar magnet LiHo x Y 1– x F 4 enters a strongly frustrated regime for small Ho 3+ concentrations with x < 0.05. In this regime, the magnetic moments of the Ho 3+ ions experience small quantum corrections to the common Ising approximation of LiHo x Y 1– x F 4 , which lead to a $\mathbb{Z}_2$-symmetry breaking and small, degeneracy breaking energy shifts between different eigenstates. Here we show that destructive interference between two almost degenerate excitation pathways burns spectral holes in the magnetic susceptibility of strongly driven magnetic moments in LiHo x Y 1– x F 4 . Such spectral holes in the susceptibility, microscopically described in terms of Fano resonances, can already occur in setups of only two or three frustrated moments, for which the driven level scheme has the paradigmatic Λ shape. For larger clusters of magnetic moments, the corresponding level schemes separate into almost isolated many-body Λ schemes, in the sense that either the transition matrix elements between them are negligibly small or the energy difference of the transitions is strongly off-resonant to the drive. This enables the observation of Fano resonances, caused by many-body quantum corrections to the common Ising approximation also in the thermodynamic limit. Finally, we discuss its dependence on the driving strength and frequency as well as the crucial role that is played by lattice dissipation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Robust Independent Validation of Experiment and Theory: Rivet version 3

First released in 2010, the Rivet library forms an important repository for analysis code, facilitating comparisons between measurements of the final state in particle collisions and theoretical calculations of those final states. We give an overview of Rivet's current design and implementation, its uptake for analysis preservation and physics results, and summarise recent developments including propagation of MC systematic-uncertainty weights, heavy-ion and ep physics, and systems for detector emulation. In addition, we provide a short user guide that supplements and updates the Rivet user manual.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Optimal Header Design for Diffusion Bonded Heat Exchangers

Microchannel heat exchangers have seen increasing adoption in many high-pressure applications in recent decades but are subject to particulate fouling from the relatively small channel size compared to traditional designs. Typical cleaning methods require process shutdown, heat exchanger removal, cleaning, then reassembly. The objective of this project was to refine and transfer technology to enable header design improvements for Cleaning-in-Place (CIP), allowing for reduced/negligible process interruption for the cleaning process. The technology transfer was from Sandia National Laboratories (Sandia) to Vacuum Process Engineering, Inc. (VPE). This primary purpose of CIP was developed while considering channel flow uniformity and heat exchanger cost. The project phases were to 1) capture and define potential improvement options, 2) evaluate options with both simulation and experiments, and 3) transfer design knowledge to the industry partner. These efforts resulted in improved header designs from the first known focused effort in this area. The improved designs will help the entire microchannel heat exchanger field that has applications in supercritical CO 2 power cycles, hydrogen (fuel cell) vehicle fueling, liquified natural gas processing, and more.

42 ENGINEERING↗
DOE OSTI2022

Mitigate: An Adaptive Network Data Anonymization Tool Using Condensation-Based Differential Privacy

Modern network devices collect a large amount of data that can be analyzed to identify bottlenecks, anomalies, cyber-attacks, etc. Therefore, there is often a need to analyze such collections of network data quite often by an external expert or by the research community. However, these collections of data contain sensitive, proprietary information. In order for the network data to be shared, it must first be anonymized. The overall objective of this project is to develop an innovative privacy management tool to anonymize network data and achieve sufficient privacy, acceptable data utility, and efficient data analysis at the same time. No existing anonymization methods can achieve all of these at the same time. The core of this technology is a differential private clustering algorithm that provides strong privacy protection, preserves data properties important for subsequent analysis, and allows the party receiving the anonymized data to conduct analysis directly on anonymized data without the need of decryption or any extra processing. The research carried out was to design, implement and verify a solution to this problem by completing the following tasks: 1) developing the core technology; 2) developing a context based method that automatically recommends fields that must be anonymized; 3) conducted experiments showing superior results using our approach compared to existing tools, and 4) developed an intuitive but basic user interface. The research that was conducted generated novel algorithmic techniques that utilize state-of-the-art methods such as condensation, differential privacy preservation, clustering, automated tuning based on contextual awareness, and recommendation techniques to specify columns to users for anonymization leading to optimal privacy that allows research analysis on the dataset. Experiments were conducted to evaluate the efficacy of these novel algorithmic techniques by performing analysis on original non-anonymized datasets, then conducting analysis on the same yet anonymized datasets and comparing the results of the analyses. Overall, the anonymized analysis results were within 1% of the original results, verifying that the generated technology not only guarantees a high level of privacy but also enables research analysis as if it were conducted on the original dataset. Potential applications of this technology include anonymization of any type of structured network datasets that contain sensitive identifiers, such as IP addresses, that can be used in multiple applications. For example, to create an AI or machine learning model for cyber security, e.g., to detect attacks, or for performance analysis, e.g., identify bottlenecks or predict performance. In addition, a market analysis that was conducted for potential applications of this technology identified a broader range of applications of our anonymization technology beyond the network sector that includes healthcare, banking, insurance, securities, finance (FISB), data brokering, cloud services, ad sales, and government.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Status of the Optical Dilatometer Method of Evaluating the Peak Irradiation Temperatures of SiC Passive Monitors

The main objective of this project was to conduct a comparative assessment between the optical dilatometer method and resistivity method, using all 10 SiC temperature monitors provided by two Nuclear Science User Facility experiments: BSU-8242 and General Electric Hitachi. Unfortunately, due to multiple delays in acquiring, shipping, and cleaning the SiC temperature monitors, the project was only able to process one (1) SiC temperature monitor during this period. SiC temperature monitor KGT-3357 was evaluated via the optical dilatometer method to determine its peak irradiation temperature. The KGT-3357 sample was from the BSU-8242 experiment and designed for a temperature of 300°C and an exposure of 1 dpa. The optical dilatometer measurements indicated that the KGT-3357 SiC temperature monitor’s peak irradiation temperature range was 240–267°C, with sensitivity of approximately ±20°C. Additionally, this temperature range falls within the evaluated melt wire temperature range of 238.6–271.5 °C. The remaining six (6) SiC temperature monitors from the BSU-8242 experiment and three (3) from the General Electric Hitachi experiment will be used in the future work to further validate the optical dilatometer method for measuring SiC peak irradiation temperatures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Proposed Subcritical Assembly for Nuclear Criticality Safety Training at the Oak Ridge National Laboratory

The design of a new subcritical assembly at Oak Ridge National Laboratory (ORNL) has been finalized. This design takes the feasibility study of the subcritical assembly performed in August 2020 to an implementable design. This subcritical assembly will support the Nuclear Criticality Safety Program (NCSP) training and education program. The addition of this subcritical assembly into the NCSP training and education will enhance the program by providing backup capacity for training if nuclear facility operations are disrupted at Sandia National Laboratories or the National Criticality Experiments Research Center; providing a new location that is more accessible to students in the Eastern portion of the United States; providing flexibility to support students from a diverse background (e.g., university students, foreign nationals). The proposed subcritical assembly uses legacy AGN-201M research reactor fuel plates that are available at the Y-12 National Security Complex. The final design of this subcritical assembly contains approximately 617 grams of 235 U as UO 2 powder distributed homogeneously in polyethylene. The fuel plates will have a graphite neutron reflector to obtain a core multiplication, M, from 10 to 20, corresponding to a $k_{eff}$ of 0.90 to 0.95, respectively. The subcritical assembly will be able to support at least four experiments for the training courses: (1) the addition of fissile material to the core (mass), (2) a core separation experiment (interaction), (3) the addition of moderators to the core (moderation), and (4) the addition of neutron absorbers to the core (poison/absorption). The subcritical assembly will be designed to be inherently safe—subcritical under all normal and abnormal conditions— and will provide the capability to conduct hands-on training to support NCSP and general nuclear criticality safety staff training and qualification goals.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Criticality Accidents in Experiments and Reactors [Slides]

The objectives of this presentation are to: (1) gain awareness of the historical timelines and trends associated with the occurrences of critical experiment accidents associated, (2) identify lessons learned from accidents with critical experiments and the development of standards for handling nuclear material and performance of critical experiments; and (3) to ensure trainees gain a working knowledge of the factors that lead to the accidents.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Antiproton background of the Mu2e experiment and the vertical misalignment of the Mu2e beamline

Mu2e experiment will search for the neutrinoless µ − → e − conversion in the field of an aluminum nucleus. The total expected background in Mu2e Run I is 0.11 ± 0.03 events, and the antiproton background, 0.01 ± 0.003(stat) ± 0.010(syst), is about 10% of the total. The report discusses the antiproton background of the Mu2e experiment. As it will be explained, the antiproton background is sensitive to the vertical misalignment of the Mu2e beamline. Therefore, it is important to measure the misalignment in situ. The report introduces a data-driven technique of measuring the beamline misalignment. The material is organized as follows. Section 2 describes the Mu2e experiment. Section 3 presents the antiproton background. Section 4 explains the alignment in the apparatus. Section 5 presents the vertical misalignment and a method to measure it from the data. Section 6 presents the initial simulations made and the discussion of the results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Critical Simulation Pipeline for COG Suites [Poster]

The CRItical Simulation Pipeline (CRISP) is a Python package for automating validation of reactor criticality benchmarks. CRISP supplies COG—a multi-particle radiation transport code maintained by the Nuclear Criticality Safety Division—with a pipeline to calculate k eff performance for 400+ benchmark experiments with 3,400+ configurations from the International Criticality Safety Benchmark Evaluation Project (ICSBEP). The pipeline includes four stages: materials configuration, input card templating, cluster submission, and results analysis. CRISP includes a command-line interface to facilitate user interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

MEOP based 3 He polarization and injection system for experiments below 1 K

Metastability exchange optical pumping (MEOP) is a widely used technique for producing polarized 3 He. In connection with an experiment to search for the electric dipole moment of the neutron (nEDM) we have built a MEOP based 3 He polarization and injection system to prepare 80 % polarized 3 He at room temperature which will be injected into a ∼ 400 mK measurement cell filled with superfluid 4 He. We describe the polarization and injection system, which is designed to allow for final concentrations of 10 -8 –10 -10 of 80% polarized 3 He in the superfluid filled measurement cell. Only ≈ 0.72% polarization loss due to gradients is expected during injection.

Gas systems and purification↗
DOE OSTI2023

On silica's roles in controlling americium migration in contaminated sediments

Two studies in the early 1980s described the leaching behavior of americium (Am) disposed as part of acidic high-salt processing wastes from the Hanford Site’s Plutonium Finishing Plant to nearby ground sediments. Here these batch leach experiments showed that the Am concentrations followed a linear log [Am] versus pH relationship with a slope of –1. Column leach experiments in the second study, however, did not follow this relationship and only ~30% of the americium desorbed even after extensive column leaching. Here, the 1980s research is re-examined along with previously unpublished information and, in light of recent published work, a plausible mechanism is proposed to explain these phenomena. Amorphous silica in the contaminated sediments is postulated to be the substrate responsible for both the exchangeable Am available for leaching and the retained low-leachable Am made evident in the column leach experiments. The exchangeable Am 3+ in the contaminated sediment leach experiments behaves with pH dependence similar to that observed for uptake onto amorphous silica of sodium (Na + ), calcium (Ca 2+ ), barium (Ba 2+ ), cadmium (Cd 2+ ), uranyl (UO 2 2+ ), ferric (Fe 3+ ), chromic (Cr 3+ ), cupric (Cu 2+ ), plumbous (Pb 2+ ), uranium(IV) (U 4+ ), plutonium(IV) (Pu 4+ ), zirconium (Zr 4+ ), analogue lanthanide (gadolinium, Gd 3+ , europium, Eu 3+ , and lutetium, Lu 3+ ) and curium (Cm 3+ ) ions as well as other studies with Am 3+ . Correspondingly, the residual low-leachable Am 3+ revealed in the column leach experiments is attributed to incorporation of Am 3+ within amorphous silica by dynamic Am 3+ sorption and silica precipitation processes.

58 GEOSCIENCES↗
DOE OSTI2025

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗