Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

N2O fluxes at the soil-atmosphere interface in various ecosystems and the global N2O budget

The overall purpose of this research task is to study the effects of soil properties and ecosystem variables on N2O exchanges at the soil-atmosphere interface, and to assess their effects on the globle N2O budget. Experimental procedures are implemented in various sites to measure the source/sink relations of N2O at the soil-atmosphere interface over prolonged periods of time as part of the research of biogeochemical cycling in terrestrial ecosystems. A data-base for establishing quantitative correlations between N2O fluxes and soil and environmental parameters that are of potential use for remote sensing, is being developed.

Banin, Amos↗

A discrete-time adaptive control scheme for robot manipulators

A discrete-time model reference adaptive control scheme is developed for trajectory tracking of robot manipulators. The scheme utilizes feedback, feedforward, and auxiliary signals, obtained from joint angle measurement through simple expressions. Hyperstability theory is utilized to derive the adaptation laws for the controller gain matrices. It is shown that trajectory tracking is achieved despite gross robot parameter variation and uncertainties. The method offers considerable design flexibility and enables the designer to improve the performance of the control system by adjusting free design parameters. The discrete-time adaptation algorithm is extremely simple and is therefore suitable for real-time implementation. Simulations and experimental results are given to demonstrate the performance of the scheme.

Tarokh, M.↗

Robust control of an active precision truss structure

A description is given of the efforts in control of an active precision truss structure experiment. The control objective is to provide vibration suppression to selected modes of the structure subject to a bandlimited disturbance and modeling errors. Based on performance requirements and an uncertainty description, several control laws using the H-infinity optimization method are synthesized. The controllers are implemented on the experimental facility. Preliminary experimental results are presented.

Chu, C. C.↗

Influence of temperature gradients on the measurement accuracy of IR imaging systems

Implementing a new experimental aerodynamic technique, a long electrically heated wire was placed across flows with general velocity distributions (wakes, jets). By measuring the temperature distribution along the wire with an IR camera, the flow behavior was identified. Furthermore, it is suggested that by using Nusselt number correlations, the velocity distributions can be deduced. Comparing the results with predictions based on heat transfer correlations, it was found that the IR camera cannot accurately track high gradient temperature fields. A correction procedure is outlined to account for the errors found in the measured results.

Gartenberg, Ehud↗

Performance and stability of telemanipulators using bilateral impedance control

A new method of control for telemanipulators called bilateral impedance control is investigated. This new method differs from previous approaches in that interaction forces are used as the communication signals between the master and slave robots. The new control architecture has several advantages: (1) It allows the master robot and the slave robot to be stabilized independently without becoming involved in the overall system dynamics; (2) It permits the system designers to arbitrarily specify desired performance characteristics such as the force and position ratios between the master and slave; (3) The impedance at both ends of the telerobotic system can be modulated to suit the requirements of the task. The main goals of the research are to characterize the performance and stability of the new control architecture. The dynamics of the telerobotic system are described by a bond graph model that illustrates how energy is transformed, stored, and dissipated. Performance can be completely described by a set of three independent parameters. These parameters are fundamentally related to the structure of the H matrix that regulates the communication of force signals within the system. Stability is analyzed with two mathematical techniques: the Small Gain Theorem and the Multivariable Nyquist Criterion. The theoretical predictions for performance and stability are experimentally verified by implementing the new control architecture on a multidegree of freedom telemanipulator.

Moore, Christopher Lane↗

The benchmark aeroelastic models program: Description and highlights of initial results

An experimental effort was implemented in aeroelasticity called the Benchmark Models Program. The primary purpose of this program is to provide the necessary data to evaluate computational fluid dynamic codes for aeroelastic analysis. It also focuses on increasing the understanding of the physics of unsteady flows and providing data for empirical design. An overview is given of this program and some results obtained in the initial tests are highlighted. The tests that were completed include measurement of unsteady pressures during flutter of rigid wing with a NACA 0012 airfoil section and dynamic response measurements of a flexible rectangular wing with a thick circular arc airfoil undergoing shock boundary layer oscillations.

Bennett, Robert M.↗

The benchmark aeroelastic models program: Description and highlights of initial results

An experimental effort was implemented in aeroelasticity called the Benchmark Models Program. The primary purpose of this program is to provide the necessary data to evaluate computational fluid dynamic codes for aeroelastic analysis. It also focuses on increasing the understanding of the physics of unsteady flows and providing data for empirical design. An overview is given of this program and some results obtained in the initial tests are highlighted. The tests that were completed include measurement of unsteady pressures during flutter of a rigid wing with an NACA 0012 airfoil section and dynamic response measurements of a flexible rectangular wing with a thick circular arc airfoil undergoing shock boundary layer oscillations.

Bennett, Robert M.↗

A theoretical and experimental investigation of impact control for manipulators

This article describes a simple control strategy for stable hardon-hard contact of a manipulator with the environment. The strategy is motivated by recognition of the equivalence of proportional gain explicit force control and impedance control. It is shown that negative proportional force gains, or impedance mass ratios less than unity, can equivalently provide excellent impact response without bouncing. This result is indicated by an analysis performed with an experimentally determined arm/sensor/environment model. The results are corroborated by experimental data from implementation of the control algorithms on the CMU DD Arm II system. The results confirm that manipulator impact against a stiff environment without bouncing can be readily handled by this novel control strategy.

Volpe, Richard↗

Aligning parallel arrays to reduce communication

Axis and stride alignment is an important optimization in compiling data-parallel programs for distributed-memory machines. We previously developed an optimal algorithm for aligning array expressions. Here, we examine alignment for more general program graphs. We show that optimal alignment is NP-complete in this setting, so we study heuristic methods. This paper makes two contributions. First, we show how local graph transformations can reduce the size of the problem significantly without changing the best solution. This allows more complex and effective heuristics to be used. Second, we give a heuristic that can explore the space of possible solutions in a number of ways. We show that some of these strategies can give better solutions than a simple greedy approach proposed earlier. Our algorithms have been implemented; we present experimental results showing their effect on the performance of some example programs running on the CM-5.

Sheffler, Thomas J.↗

Development of Methodologies for the Estimation of Thermal Properties Associated with Aerospace Vehicles

A thermal stress analysis is an important aspect in the design of aerospace structures and vehicles such as the High Speed Civil Transport (HSCT) at the National Aeronautics and Space Administration Langley Research Center (NASA-LaRC). These structures are complex and are often composed of numerous components fabricated from a variety of different materials. The thermal loads on these structures induce temperature variations within the structure, which in turn result in the development of thermal stresses. Therefore, a thermal stress analysis requires knowledge of the temperature distributions within the structures which consequently necessitates the need for accurate knowledge of the thermal properties, boundary conditions and thermal interface conditions associated with the structural materials. The goal of this proposed multi-year research effort was to develop estimation methodologies for the determination of the thermal properties and interface conditions associated with aerospace vehicles. Specific objectives focused on the development and implementation of optimal experimental design strategies and methodologies for the estimation of thermal properties associated with simple composite and honeycomb structures. The strategy used in this multi-year research effort was to first develop methodologies for relatively simple systems and then systematically modify these methodologies to analyze complex structures. This can be thought of as a building block approach. This strategy was intended to promote maximum usability of the resulting estimation procedure by NASA-LARC researchers through the design of in-house experimentation procedures and through the use of an existing general purpose finite element software.

Scott, Elaine P.↗

Observations of the orbital debris complex by the Midcourse Space Experiment (MSX) satellite

The midcourse space experiment (MSX) provides the opportunity to observe debris at multiple, simultaneous wavelengths, or in conjunction with other sensors and prior data sets. The instruments onboard MSX include an infrared telescope, an infrared interferometer, a visible telescope, an ultraviolet telescope and a spectroscopic imager. The spacecraft carries calibration spheres for instrument calibration and atmospheric drag studies. The experimental program, the implementation aspects, the data reduction techniques and the preliminary results are described.

Vilas, Faith↗

A Plasma Aerocapture and Entry System for Manned Missions and Planetary Deep Space Orbiters

A rapid mission to Mars requires a large change in vehicle velocity upon arrival to establish a stable orbit. This demand is even greater for a Neptune science, requiring many kilometers per second of V. It is clear from past mission studies that a manned Mars mission and deep space planetary orbiters require aerobraking and aerocapture which use aerodynamic drag forces to slow the spacecraft. Aerocapture would enable long term studies of the outer planets and moons that would not be possible with existing braking methodologies. While the ability to utilize these atmospheres to slow down and capture spacecraft would dramatically reduce the cost, launch mass, and travel time, currently planned approaches require significant additional spacecraft mass and risk as the spacecraft must descend deep into the planetary atmosphere in order to produce significant drag on a relatively small aeroshell. The plasma based Magnetoshell being developed in this program holds the potential to perform the desired braking with significantly increased drag and control while dramatically reducing mass. Most importantly, this technology significantly lowers the risk involved with aerocapture thereby making manned planetary missions possible. The fundamental physics of the Magnetoshell is based on demonstrated experimental results. Successful implementation will dramatically decrease radiation exposures, mission risk, launch cost, and launch mass. Implementation of aerobraking by employing a solid deflector or aeroshell as a method for orbit insertion and circularization has been successfully demonstrated in the past, resulting in launch mass savings greater than 50%. In order to reduce the effect of frictional heating and dynamic pressure on the typically fragile aeroshell, or worse solar panels, the braking must be distributed over many orbital passes at a high altitude in the less dense regions of the atmosphere. It can thus take several months for a meter-scale, 1000 kg, aeroshell to execute the many elliptic orbital passes through the atmosphere to achieve the required V. This rather slow method of braking not only reduces frictional heating and dynamic forces, but also avoids unpredictable dynamic behavior due to turbulence, as well as unknown and seasonally variable atmospheric composition and temperature which has led to dangerous, mission-critical events. For exploration class missions such as DRA 5.0 aerocapture and Thermal Protection Systems (TPS) are proposed for breaking at Mars for cargo missions. Traditional aerocapture is considered too risky for manned missions. Even with the enormous mass savings that aerocapture allows, it still requires 80 tons of aeroshell and significantly increased launch mass and propellant. As will be shown, by using Magnetoshells for aerobraking, the DRA 5.0 mission will save 224 metric tons (MT) and greater than $2 B in launch costs. Beyond the dramatic savings for existing mission architectures, a low-mass, risk-free aerocapture system would allow much more rapid missions to Mars and deep space orbiters by allowing direct, faster trajectories. As will be shown, the plasma Magnetoshell Aerobraking, Aerocapture, and Entry System (AAES) not only reduces mass and cost while enabling significant new mission architectures, but also significantly reduces radiation exposures by decreasing trip times.

Manned Missions↗

Testing a Neural Network Accelerator on a High-Altitude Balloon

The cognitive communications project has been working to re d machine learning approaches to support their deployment and sustained use in space environments. It has historically been difficult to implement such techniques on space platforms, however, due to the computational requirements they levy onto general-purpose avionics hardware. While technologies exist to accelerate the computation of aspects of neural networks, such platforms have not historically been deployed in space environments. Given that testing payloads in such environments can be both cost- and time-prohibitive, high-altitude balloons can be used as a way to approximate a space environment at a much lower cost, thus providing a cost-effective way in which to test newer approaches to hardware acceleration for artificial intelligence which may be deployed onto spacecraft more directly. This paper describes a successful test of a commercial off- the-shelf neural network accelerator on a high-altitude balloon. It begins by explaining our selection criteria when evaluating different commercial neural network acceleration techniques: primary considerations include size, weight, and power (SWaP) as well as ease of integration. Next, the paper describes the development and implementation of an experimental flight test platform: flight and ground components are discussed. Afterward, the paper discusses the experimental payload itself: this includes the experimental procedure as well as the specific image and method used for testing. Finally, the paper concludes with an evaluation of both the experimental device tested at altitude as well as the flight test framework itself, identifying how the existing platform can be used to continue tes g commercial off-the-shelf (COTS) solutions for acceleration.

Clark, Gilbert↗

First-Order Runtime Verification using BDDs

Runtime Verification (RV) expedites the analyses of execution traces for detecting system errors and for statistical and quality analysis. Having started modestly, with checking temporal properties that are based on propositional (yes/no) values, the current practice of RV often involves properties that are parametrized by the data observed in the input trace. The specifications are based on various formalisms, such as automata, temporal logics, rule systems, and stream processing. Checking execution traces that are data intensive against a specification that imposes strong dependencies between the data, poses a nontrivial challenges; in particular if runtime verification has to be performed online, while many events that carry data appear within small time proximities. Towards achieving this goal, it was recently suggested to represent relations over the observed data values, based on BDDs, where data elements are enumerated and then converted into bit vectors. This representation provided a very simple and natural extension of an RV algorithm from propositional to first-order LTL, but more importantly, was shown to contribute to the memory compactness and to the speed, as was demonstrated using a corresponding implementation. We extend here the capabilities of BDD-based RV with the ability to express timing constraints, where the monitored events include (integer) clock values. We show how to efficiently operate on BDDs that represent both relations on (enumerations of) values and time dependencies, as required by the addition of the time constraints. We demonstrate our algorithm with an efficient implementation and provide experimental results.

Peled, Doron↗

Medium-Range River Flood Forecasts Using a Long Short-Term Memory Network

River flooding and the impacts are a concern for decision makers throughout the United States. Accurate medium-range forecasts (~3-7 days) are critical for providing advanced outlooks to emergency management officials. Unfortunately, accurately forecasting rainfall-runoff and the subsequent rise and fall within rivers remain a challenge in hydrological modeling. While complex physical modeling systems are the standard for representing the hydrological processes, they are computationally demanding and can require extensive calibration. Further, uncertainties remain in the model parameters and input data. The use of machine learning can reduce some of the computational demand while maintaining high accuracy. Therefore, this project makes use of a Long Short-Term Memory (LSTM) network which explicitly accounts for the time-dependent nature of rainfall-runoff modeling. The developed LSTM was trained to predict river gauge height, or stage height, based on time-lagged input features which include: gauge height to initialize the model, the NASA Short-term Prediction Research and Transition Center’s instance of the Land Information System (SPoRT-LIS) relative soil moisture to describe the rainfall infiltration rate, and 6-hr Multi-Radar Multi-Sensor quantitative precipitation estimate (MRMS QPE). The developed LSTM based system is then used to produce 7-day forecasts with a 6-hr temporal resolution using three different quantitative precipitation forecasts (QPF) from the NWS’s Weather Prediction Center (WPC), the NCEP Global Forecast System (GFS) model and the National Blend of Models (NBM). This trained modeling system has been implemented as an experimental product at over 100 different rivers in collaboration with at multiple National Weather Service (NWS) Forecast Offices and River Forecast Centers (RFC) across the eastern half of the United States. The developed LSTM model achieved average Nash-Sutcliffe efficiency (NSE) 0.89 higher than the equivalent medium-range National Water Model ensemble member forecast over a 7-day forecast. In addition to the initial development and evaluation, this project has continued to expand. While the initial model was developed for precipitation dominated basins, expansion of the project has taken it to basins effected by snow melt. This presentation will provide an overview of the project with focus on recent developments on incorporating snow melt processes into the model.

Andrew T. White↗

An experimental SMI adaptive antenna array for weak interfering signals

A modified sample matrix inversion (SMI) algorithm designed to increase the suppression of weak interference is implemented on an existing experimental array system. The algorithm itself is fully described as are a number of issues concerning its implementation and evaluation, such as sample scaling, snapshot formation, weight normalization, power calculation, and system calibration. Several experiments show that the steady state performance (i.e., many snapshots are used to calculate the array weights) of the experimental system compares favorably with its theoretical performance. It is demonstrated that standard SMI does not yield adequate suppression of weak interference. Modified SMI is then used to experimentally increase this suppression by as much as 13dB.

Dilsavor, R. L.↗

Implementation of a Smeared Crack Band Model in a Micromechanics Framework

The smeared crack band theory is implemented within the generalized method of cells and high-fidelity generalized method of cells micromechanics models to capture progressive failure within the constituents of a composite material while retaining objectivity with respect to the size of the discretization elements used in the model. An repeating unit cell containing 13 randomly arranged fibers is modeled and subjected to a combination of transverse tension/compression and transverse shear loading. The implementation is verified against experimental data (where available), and an equivalent finite element model utilizing the same implementation of the crack band theory. To evaluate the performance of the crack band theory within a repeating unit cell that is more amenable to a multiscale implementation, a single fiber is modeled with generalized method of cells and high-fidelity generalized method of cells using a relatively coarse subcell mesh which is subjected to the same loading scenarios as the multiple fiber repeating unit cell. The generalized method of cells and high-fidelity generalized method of cells models are validated against a very refined finite element model.

Pineda, Evan J.↗