SEARCH · Search NASA

Results for “generalized continuum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Periodic modulation of the atmosphere of Alpha Orionis

Alpha Orionis (Betelgeuse; M2 Iab) was monitored with IUE since 1984. Discovery of a 420-day periodic modulation of the flux in the optical and ultraviolet continua, and in the Mg II h and k line emission cores suggests that periodic photospheric pulsations were present from 1984 to 1986. This behavior continues through 1987. However, the general flux level of the ultraviolet continuum and the Mg II lines is decreasing, and the amplitude of the variation may be reduced. These decreases may be the emerging signature of an additional longer period. The density sensitive C II diagnostic, 2325.4/2328.1, indicates the chromospheric densities range between log N(sub e) (cm-3) = 8.7 and 9.5, but periodicities are not evident.

Dupree, A. K.↗

NASA NTRS1990

On planetary nebulae as sources of carbon dust: Infrared emission from planetary nebulae of the galactic halo

Planetary nebulae of the galactic disk are generally seen to emit a thermal continuum due to dust grains heated by stellar and nebular photons. This continuum typically peaks between 25 and 60 micron m, so that the total power emitted by the dust is sampled well by the broad-band measurements made by IRAS. Researchers examine here the characteristics of the infrared emission from the four planetary nebulae which are believed on the basis of their low overall metallicities to belong to the halo population. These nebulae are of particular interest because they are the most metal-poor ionized nebulae known in our Galaxy, and offer the opportunity to probe possible dependences of the dust properties on nebular composition. Researchers present fluxes extracted from co-addition of the IRAS data, as well as ground-based near infrared measurements. Each of the four halo objects, including the planetary nebula in the globular cluster M15, is detected in at least one infrared band. Researchers compare the estimated infrared excesses of these nebulae (IRE, the ratio of measured infrared power to the power available in the form of resonantly-trapped Lyman alpha photons) to those of disk planetary nebulae with similar densities but more normal abundances. Three of the halo planetaries have IRE values similar to those of the disk nebulae, despite the fact that their Fe- and Si-peak gas phase abundances are factors of 10 to 100 lower. However, these halo nebulae have normal or elevated C/H ratios, due to nuclear processing and mixing in their red giant progenitors. Unlike the other halo planetaries, DDDM1 is deficient in carbon as well as in the other light metals. This nebula has a substantially lower IRE than the other halo planetaries, and may be truly dust efficient. Researchers suggest that the deficiency is due to a lack of the raw material for producing carbon-based grains, and that the main bulk constituent of the dust in these planetary nebulae is carbon.

Dinerstein, Harriet L.↗

NASA NTRS2004

Control of Initialized Fractional-Order Systems

Fractional-Order systems, or systems containing fractional derivatives and integrals, have been studied by many in the engineering area. Additionally, very readable discussions, devoted specifically to the subject, are presented by Oldham and Spanier, Miller and Ross, and Pudlubny (1999a). It should be noted that there are a growing number of physical systems whose behavior can be compactly described using fractional system theory. Of specific interest to electrical engineers are long lines, electrochemical processes, dielectric polarization, colored noise, viscoelastic materials, and chaos. With the growing number of applications, it is important to establish a theory of control for these fractional-order systems, and for the potential use of fractional-order systems as feedback compensators. This topic is addressed in this paper. The first section discusses the control of fractional-order systems using a vector space representation, where initialization is included in the discussion. It should be noted that Bagley and Calico and Padovan and Sawicki both present a fractional state-space representation, which do not include the important historic effects. Incorporation of these effects based on the initialized fractional calculus is presented . The control methods presented in this paper are based on the initialized fractional order system theory. The second section presents an input-output approach. Some of the problems encountered in these sections are: a) the need to introduce a new complex plane to study the dynamics of fractional-order systems, b) the need to properly define the Laplace transform of the fractional derivative, and c) the proper inclusion of the initialization response in the system and control formulation. Following this, the next section generalizes the proportional-plus-integral-control (PI-control) and PID-control (PI-plus- derivative) concepts using fractional integrals. This is then further generalized using general fractional- order compensators. Finally the compensator concept is generalized by the use of a continuum of fractions in the compensator via the concept of order-distributions. The last section introduces fractional feedback in discrete-time.

Hartley, Tom T.↗

NASA NTRS2013

What Do Millimeter Continuum and Spectral Line Observations Tell Us about Solar System Bodies?

Solar system objects are generally cold and radiate at low frequencies and tend to have strong molecular rotational transitions. Millimeter continuum and spectral line observations provide detailed information for nearly all solar system bodies. At these wavelengths, details of the bulk physical composition of icy surfaces, the size and albedo of small objects, the composition of planetary atmospheres can be measured as well as monitoring of time variable phenomena for extended periods (not restricted to nighttime observations), etc. Major issues in solar system science can be addressed by observations in the millimeter/sub-millimeter regime such as the origin of the solar system (isotope ratios, composition) and the evolution of solar system objects (dynamics, atmospheric constituents, etc). ALMA s exceptional sensitivity, large spectral bandwidth, high spectral resolution, and angular resolution (down to 10 milliarcsec) will enable researchers for the first time to better resolve the smallest bodies in the solar system and provide detailed maps of the larger objects. Additionally, measurements with nearly 8 GHz of instantaneous bandwidth to fully characterize solar system object s spectrum and detect trace species. The spatial information and line profiles can be obtained over 800 GHz of bandwidth in 8 receiver bands to not only assist in the identification of spectral lines and emission components for a given species but also to help elucidate the chemistry of the extraterrestrial bodies closest to us.

Milam, Stefanie N.↗

NASA NTRS1990

Infrared and optical imagery of the Crab Nebula

The paper presents 1.644 micron forbidden-line Fe II and 1.570 micron continuum images of the Crab Nebula which are compared with optical H-alpha, forbidden-line O III, and 5100 A continuum data. While the same prominent filaments are generally apparent in all lines, no substantial variations within the nebula in the strength and morphology of forbidden-line Fe II relative to the other lines are found. The infrared to optical continuum ratio of the synchrotron nebula shows 15 - 20 percent variations which are dominated by features which appear related to the position of the pulsar. These are interpreted as variations of 0.15 in the spectral index and it is suggested that they are related to the radiative decay of energetic particles and the paths over which these particles travel from the pulsar throughout the nebula.

Hester, J. Jeff↗

DOE OSTI2021

All-Atom Simulation of 3D Hot Spot Formation in Shocked TATB Explosive

TATB is an insensitive high explosive (IHE) critical to the stockpile that is challenging to model at the continuum scale. Advanced detonation models in the Cheetah high explosive chemistry code require validation though subscale simulations. High explosive initiation is determined by micron-scale physics of hot spots formed a shock-collapsed pores. Pore sizes between 100 nm and 1 μm are believed to be the most important for determining the shock sensitivity of TATB. This range of pore sizes is difficult to access at the atomic scale through allatom molecular dynamics (MD) simulations, even with Sierra-class computers. Quasi-2D simulations are widely used and allow much larger pore sizes (up to 400 nm) to be studied, but the applicability of 2D simulations to the actual 3D pore response is not understood. Resolving these uncertainties through “full physics” MD modeling is key for generalizing, parameterizing, and validating the kinds of continuum models used to inform design, safety, and performance. This work was a continuation of FY20 efforts pushing simulations to full 3D with the largest-ever all-atom simulations of an explosive. These were the first all-atom full-3D simulations of large hot spots thought to govern explosive detonation and required over a billion atoms. Simulations were performed using LAMMPS, an open SNL science code. MD explosive models present unique challenges, even for established codes such as LAMMPS. Their model forms are more complex than typical models for metals, while simulating high temperature-pressure conditions is demanding and increases computational cost. Scaling problems in GPU-enabled MD algorithms initially limited simulations to <100 million atoms but were resolved through collaboration with SNL. An overall 24x speedup was obtained relative to CPU machines. Specialized analysis of these simulations required a bottom-up refactoring and algorithm parallelization of in-house codes and application of computer vision algorithms to extract meaningful information.

36 MATERIALS SCIENCE↗

NASA NTRS1993

Reynolds number influences in aeronautics

Reynolds number, a measure of the ratio of inertia to viscous forces, is a fundamental similarity parameter for fluid flows and therefore, would be expected to have a major influence in aerodynamics and aeronautics. Reynolds number influences are generally large, but monatomic, for attached laminar (continuum) flow; however, laminar flows are easily separated, inducing even stronger, non-monatomic, Reynolds number sensitivities. Probably the strongest Reynolds number influences occur in connection with transitional flow behavior. Transition can take place over a tremendous Reynolds number range, from the order of 20 x 10(exp 3) for 2-D free shear layers up to the order of 100 x 10(exp 6) for hypersonic boundary layers. This variability in transition behavior is especially important for complex configurations where various vehicle and flow field elements can undergo transition at various Reynolds numbers, causing often surprising changes in aerodynamics characteristics over wide ranges in Reynolds number. This is further compounded by the vast parameterization associated with transition, in that any parameter which influences mean viscous flow development (e.g., pressure gradient, flow curvature, wall temperature, Mach number, sweep, roughness, flow chemistry, shock interactions, etc.), and incident disturbance fields (acoustics, vorticity, particulates, temperature spottiness, even electro static discharges) can alter transition locations to first order. The usual method of dealing with the transition problem is to trip the flow in the generally lower Reynolds number wind tunnel to simulate the flight turbulent behavior. However, this is not wholly satisfactory as it results in incorrectly scaled viscous region thicknesses and cannot be utilized at all for applications such as turbine blades and helicopter rotors, nacelles, leading edge and nose regions, and High Altitude Long Endurance and hypersonic airbreathers where the transitional flow is an innately critical portion of the problem.

Bushnell, Dennis M.↗

NASA NTRS2024

Multiscale Modeling of Thermoplastics Using Atomistic-informed Micromechanics

A multiscale repeating unit cell model of a single spherulite containing four disparate length scales was developed to predict the thermoelastic behavior of semicrystalline thermoplastic materials for composite aerospace applications. The continuum level scales were fully coupled and modeled using the generalized method of cells and the high fidelity generalized method of cells micromechanics theories. Data from molecular dynamics simulations were used as inputs for the amorphous and crystalline constituents in the multiscale continuum models. Effective Young’s modulus, shear modulus, Poisson’s ratio, coefficient of thermal expansion, and thermal conductivity were predicted for polyether ether ketone and polyether ketone ketone, showing good agreement with the available experimental data from the open literature. Moreover, it is shown that predicted properties are fairly insensitive to the fidelity of the micromechanics model used at the highest continuum scale or the assumed shape of the spherulite.

thermoplastics↗

NASA NTRS1995

Semianalytic continuum spectra of Type 2 supernovae

We extend the approximate radiative transfer analysis of Hershkowitz, Linder, & Wagoner (1986) to a more general class of supernova model atmospheres, using a simple fit to the effective continuum opacity produced by lines (Wagoner, Perez, & Vasu 1991). At the low densities considered, the populations of the excited states of hydrogen are governed mainly by photoionization and recombination, and scattering dominates absorptive opacity. We match the asymptotic expressions for the spectral energy density J(sub nu) at the photosphere, whose location at each frequency is determined by a first-order calculation of the deviation of J(sub nu) from the Planck function B(sub nu). The emergent spectral luminosity then assumes the form L(sub nu) = 4 pi(squared)r(squared)(sub *) zeta(squared)B(sub nu)(T(sub p)), where T(sub p)(nu) is the photospheric temperature zeta is the dilution factor, and r(sub *) is a fiducial radius (ultimately taken to be the photospheric radius r(sub p)(nu)). The atmosphere is characterized by an effective temperature T(sub e) (varies as L(sup 1/4)r(sup -1/2)(sub *)) and hydrogen density n(sub H) = dependence of zeta on frequency nu and the parameters T(sub p), r(sub p), and alpha. The resulting understanding of the dependence of the spectral luminosity on observable parameters which characterize the relevant physical conditions will be of particular use in assessing the reliability of the expanding photosphere method of distance determination. This is particularly important at cosmological distances, where no information about the progenitor star will be available. This technique can also be applied to other low-density photosphere.

Montes, Marcos J.↗

DOE OSTI2026

Tori, Klein bottles, and modulo 8 parity/time-reversal anomalies of 2+1d staggered fermions

We study the symmetries of lattice staggered fermions in 2+1d. Using the symmetries, we can place the system on any sheared torus or Klein bottle. These different backgrounds provide diagnostics of various ’t Hooft anomalies associated with the crystalline symmetries. We then compare the lattice model to its continuum limit. The symmetries of the lattice system are mapped in a nontrivial way to the symmetries of the continuum theories. Using this map, we match the ’t Hooft anomalies on the lattice and the continuum. Along the way, we develop a general formalism to study Hamiltonian lattice models on nontrivial, compact, flat spaces.

Algorithms and Theoretical Developments↗

DOE OSTI2020

Fracton phases via exotic higher-form symmetry-breaking

We study p-string condensation mechanisms for fracton phases from the viewpoint of higher-form symmetry, focusing on the examples of the X-cube model and the rank-two symmetric-tensor scalar charge theory. This work is motivated by questions of the relationship between fracton phases and continuum quantum field theories, and also provides general principles to describe p-string condensation independent of specific lattice model constructions. We give a perspective on higher-form symmetry in lattice models in terms of cellular homology. Applying this perspective to the coupled-layer construction of the X-cube model, we identify a foliated 1-form symmetry that is broken in the X-cube phase, but preserved in the phase of decoupled toric code layers. Similar considerations for the scalar charge theory lead to a framed 1-form symmetry. These symmetries are distinct from standard 1-form symmetries that arise, for instance, in relativistic quantum field theory. Here, we also give a general discussion on interpreting p-string condensation, and related constructions involving gauging of symmetry, in terms of higher-form symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Gamma-ray signatures of 𝑟-process radioactivity from the collapse of magnetized white dwarfs

We predict the gamma-ray line emission from 𝑟-process nuclei synthesized in the ejecta of the accretion-induced collapse (AIC) of a magnetized, rapidly rotating white dwarf. Using ejecta from a two-dimensional general-relativistic neutrino-magnetohydrodynamic simulation, further evolved with a radiation-hydrodynamics code coupled to an in situ nuclear reaction network, we construct angle-dependent gamma-ray spectra in the 0.01–10 MeV band via composition-dependent ray tracing through the ejecta. The emission between ∼1 and 10 d is dominated by 132 I (𝑡 1/2 = 2.3 h), continuously replenished by the decay of its parent 132 Te (𝑡 1/2 = 3.2 d), with additional contributions from 131 I, 133 Xe, and 132 Te . At 𝑡 ≳ 20 d, 56 Co (from 56 Ni decay) becomes the primary emitter. The simultaneous presence of 𝑟 process and iron-peak gamma-ray lines is distinctive of AIC ejecta and absent in binary neutron star mergers, where iron-peak nuclei are generally not synthesized. Comparing with the 3⁢𝜎 continuum sensitivities of planned MeV gamma-ray telescopes (COSI, AMEGO-X, e-ASTROGAM, GRAMS, GammaTPC), we find the brightest 𝑟-process lines detectable to ∼10 Mpc by GammaTPC and GRAMS, with the signal approaching their sensitivity threshold at 30 Mpc. As a result, the 𝑟-process spectral features survive time integration over ∼30 d exposures, demonstrating robustness against the long observation times required by gamma-ray detectors.

Nuclear reactions↗

DOE OSTI2023

Moiré Kanamori-Hubbard model for transition metal dichalcogenide homobilayers

Ab initio and continuum model studies predicted that the Γ valley transition metal dichalcogenide (TMD) homobilayers could simulate the conventional multiorbital Hubbard model on the moiré honeycomb lattice. Here, in this work, we perform the Wannierization starting from the continuum model and show that a more general moiré Kanamori-Hubbard model emerges, beyond the extensively studied standard multiorbital Hubbard model, which can be used to investigate the many-body physics in the Γ valley TMD homobilayers. Using the unrestricted Hartree-Fock and Lanczos techniques, we study these half-filled multiorbital moiré bands. By constructing the phase diagrams we predict the presence of an antiferromagnetic state and in addition we found unexpected and dominant states, such as a S = 1 ferromagnetic insulator and a charge density wave state. Our theoretical predictions made using this model can be tested in future experiments on the Γ valley TMD homobilayers.

2-dimensional systems↗

NASA NTRS1980

The observations of the X-ray source HZ Herculis/Hercules X-1

The results of a campaign of monitoring HZ Her with the IUE satellite are presented. The spectrum and light variation outside of eclipse are consistent with the Milgrom and Salpeter model for emission from the X-ray heated photosphere of the primary. Near eclipse there is UV flux in excess of the prediction of the heated photosphere model, which shows significant 35 day variations and is consistent with an origin in a precessing disk, as described by Gerend and Boynton. The spectrum shows the strong emission lines of N V and C IV, which generally vary in the sense of the continuum. The N V/C IV ratio is greater than 2 near orbital phase 0.5 and approaches unity near eclipse. It is suggested that these emission lines are optically thick and arise from both the heated photosphere and the accretion disk.

Gursky, H.↗

NASA NTRS1989

Steady magnetic reconnection in three dimensions

The concept of magnetic reconnection, defined to occur when there is an electric field parallel to field lines which are potential reconnection locations and near which the field has an X-type topology in a plane normal to the field line, has been generalized to three-dimensional configurations. A continuum of neighboring potential singular lines is found to exist, one of which supports reconnection, depending upon the imposed flow or electric field. For the case of steady reconnection, the nearby flow and electric field are shown to be severely constrained in the ideal region by the condition that the electric field = 0 there. It is noted that reconnection may occur at singularities of the electric field where this constraint fails and there is singular plasma jetting.

Priest, E. R.↗

NASA NTRS1991

Observational aspects of stellar radio flares

The study of stellar flares in the radio regime provides a nearly unique observational perspective, as the emission generally arises from the particle acceleration region. Continuum and spectral studies of radio burst emission for several classes of stars are reviewed, and some preliminary connections with the quiescent radio emission from flare stars are made. Further, the radio observations are placed in a broader observational context provided by X-ray, UV, and optical observations.

Bookbinder, Jay A.↗

NASA NTRS2000

Nonlinear Shock Acceleration and Photon Emission in Supernova Remnants

We have extended a simple model of nonlinear diffusive shock acceleration (Berezhko & Ellison 1999: Ellison &, Berezhko 1999a) to include the injection and acceleration of electrons and the production of photons from bremsstrahlung, synchrotron, inverse Compton, and pion-decay processes. We argue that, the results of this model, which is simpler to use than more elaborate ones, offer a significant improvement, over test-particle, power-law spectra which are often used in astrophysical applications of diffusive shock acceleration. With an evolutionary supernova remnant (SNR) model to obtain shock parameters as functions of ambient interstellar medium parameters and time, we predict broad-band continuum photon emission from supernova remnants in general, and SN1006 in particular, showing that our results compare well with the more complete time-dependent and spherically symmetric nonlinear model of Berezhko, Ksenofontov, & Petukhov (1999a). We discuss the implications nonlinear shock acceleration has for X-ray line emission, and use our model to describe how ambient conditions determine the TeV/radio flux ratio, an important parameter for gamma-ray observations of radio SNRs.

Ellison, Donald C.↗

NASA NTRS2005

Comprehensive Micromechanics-Analysis Code - Version 4.0

Version 4.0 of the Micromechanics Analysis Code With Generalized Method of Cells (MAC/GMC) has been developed as an improved means of computational simulation of advanced composite materials. The previous version of MAC/GMC was described in "Comprehensive Micromechanics-Analysis Code" (LEW-16870), NASA Tech Briefs, Vol. 24, No. 6 (June 2000), page 38. To recapitulate: MAC/GMC is a computer program that predicts the elastic and inelastic thermomechanical responses of continuous and discontinuous composite materials with arbitrary internal microstructures and reinforcement shapes. The predictive capability of MAC/GMC rests on a model known as the generalized method of cells (GMC) - a continuum-based model of micromechanics that provides closed-form expressions for the macroscopic response of a composite material in terms of the properties, sizes, shapes, and responses of the individual constituents or phases that make up the material. Enhancements in version 4.0 include a capability for modeling thermomechanically and electromagnetically coupled ("smart") materials; a more-accurate (high-fidelity) version of the GMC; a capability to simulate discontinuous plies within a laminate; additional constitutive models of materials; expanded yield-surface-analysis capabilities; and expanded failure-analysis and life-prediction capabilities on both the microscopic and macroscopic scales.

Arnold, S. M.↗