Search NASA⌕ Search

SEARCH · Search NASA

Results for “ground-based remote sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Atmospheric transport of pollutants from North America to the North Atlantic Ocean

Ground-based measurements strongly support the hypothesis that pollutant materials of anthropogenic origin are being transported over long distances in the midtroposphere and are a significant source of acid rain, acid snow, trace metal deposition, ozone and visibility-reducing aerosols in remote oceanic and polar regions of the Norhern Hemisphere. Atmospheric sulphur budget calculations and studies of acid rain on Bermuda indicate that a large fraction of pollutant materials emitted into the atmosphere in eastern North America are advected eastwards over the North Atlantic Ocean. The first direct airborne measurements of the vertical distribution of tropospheric aerosols over the western North Atlantic is reported here. A newly developed airborne differential adsorption lidar system was used to obtain continuous, remotely sensed aerosol distributions along its flight path. The data document two episodes of long-distance transport of pollutant materials from North America over the North Atlantic Ocean.

Harriss, R. C.↗
NASA NTRS1988

VHF radar remote sensing of atmospheric parameters over Taiwan during the time period of Typhoon Wayne

The VHF radar located at the subtropical and low latitude observing site of Taiwan has been used to observe atmospheric parameters from the troposphere to the middle atmosphere during the time passage of Typhoon Wayne in August 1986. Time-dependent wind velocities with three-dimensional profiles have been plotted by processing the recorded data of the backscattered echo power and the Doppler spectral width of the signal returns from the VHF radar. Propagation characteristics of the gravity waves excited by the enhanced convective motions of Typhoon Wayne have been detected from the Fourier power spectrum analysis of the three-dimensional wind velocities from multiple beams of the VHF radar and their cross-correlation analysis. The density perturbations caused by the propagation of the gravity waves can be calculated from the VHF radar observations. The VHF radar can also be used to detect time-dependent vertical profiles of the liquid water content. The present study shows that the equivalent rainfall rate calculated from the VHF radar is in good agreement with the ground-based measurement of rainfall rate at the same area.

Hung, R. J.↗
NASA NTRS1987

Martian surface analogs: Laboratory spectral studies in the mid infrared

Ground-based telescopic reflectance spectra and analyses of Viking data have led to the conclusion that Martian surface fines are derived from a mafic to ultramafic source material, though the actual composition of these surface fines is still undetermined. A variety of possible compositions were proposed by several authors, however, with salts, particularly sulfates and carbonates, as important components in many of these models. Although salts are predicted components of the Martian surface, they are not identified in telescopic reflectance spectroscopic observations to date. One explanation for the absence of salts in these data is that they are not in quantities large enough to detect. This study was undertaken to determine the detectability of salts in various proposed Martian surface analog mixtures. This study concentrates on the carbonates and sulfate spectral features in the 2.5 to 25 micrometer spectral range because of recent work showing the usefulness of weak bands in the mid infrared for the remote sensing of particulate planetary surfaces. All measurements were made using a Nicolet 5SXC FTIR spectrometer with a bidirectional reflectance attachment, which uses an aluminum mirror as the background against which the sample is compared.

Walsh, P. A.↗
DOE OSTI2026

Temperature profiling at the American WAKE ExperimeNt (AWAKEN): methodology and uncertainty quantification

We quantify the accuracy of the temperature profiling from ground-based spectral infrared radiance observations at the American WAKE ExperimeNt (AWAKEN). Results from pre-campaign tests and comparisons with in-situ ground-based and airborne sensors at AWAKEN indicate that temperature profiles agree satisfactorily with traditional instruments for wind energy applications. The bias is within a fraction of a degree and appears to be related to atmospheric stability. Root-mean-square differences from the reference instruments are always smaller than a degree and are often well described by the online uncertainty estimation product. Height-to-height and site-to-site temperature differences are in excellent agreement with in-situ observations, which justifies the use of temperature profilers to characterize static stability and spatial gradients of temperature.

17 WIND ENERGY↗
DOE OSTI2025

Co-Firing Switchgrass and Waste Coal in A Power Plant: A Techno-Economic and Life Cycle Evaluation for The Ohio River Valley (SWITCH) (Final Technical Report for Ohio State/FE0032204)

Abandoned coal mine lands (AMLs) represent one of the most persistent environmental challenges in the United States. Prior to the enactment of the Surface Mining Control and Reclamation Act (SMCRA) in 1977, coal mining operations were not legally required to reclaim disturbed lands, leaving behind approximately 500,000 AML sites nationwide. These sites pose severe environmental and health risks, including acid mine drainage, soil and water contamination, and spontaneous combustion of waste coal piles. Millions of Americans live within one mile of these AMLs, underscoring the urgency of remediation. Traditional reclamation practices, such as planting cool-season grasses, often fail to fully restore ecological function or leverage the economic potential of these lands. This project addressed these challenges by developing integrated strategies for resource recovery, land reclamation, and sustainable energy production. This project evaluated an integrated strategy to convert this liability into an opportunity by recovering waste coal and co-firing it with switchgrass (Panicum virgatum L.) cultivated on reclaimed or marginal AML areas in existing coal-fired power plants. Switchgrass not only provides a renewable feedstock but also aids in land reclamation and carbon sequestration. 1) Remote Sensing and Machine Learning for Waste Coal Identification Using Sentinel-2 satellite imagery and supervised classification, we applied four machine learning models to detect historical waste coal piles. Random Forest achieved the highest accuracy (precision: 86%, recall: 77%). Time-series analysis revealed gradual vegetation recovery since 1986, indicating natural reclamation processes in historical sites, while active mining areas showed ongoing disturbance. This workflow enables scalable monitoring and prioritization of reclamation efforts. 2) UAS-Based Stockpile Volume Estimation To quantify recoverable waste coal, we evaluated Unmanned Aerial Systems (UAS) equipped with Light Detection and Ranging (LiDAR) and multispectral sensors. Structure-from-Motion (SfM) photogrammetry combined with interpolated Digital Terrain Models (DTMs) achieved strong agreement with LiDAR reference volumes (Root Mean Square Error (RMSE) ≈147 m 3 , Mean Absolute Percentage Error (MAPE) ≈2%). Sensitivity analysis confirmed that spatial resolution significantly influences accuracy, emphasizing the need for high-resolution data for precise volume estimation. This approach offers a scalable, cost-effective, and accurate alternative to conventional ground-based surveys. 3) Switchgrass Cultivation for Bioenergy and Water Quality Improvement We assessed the hydrological and water quality impacts of converting AMLs to switchgrass production areas using the Soil and Water Assessment Tool (SWAT). Results showed that converting 10% of the watershed area into the switchgrass production zone reduced streamflow by 3.1%, total suspended solids by 18.1%, total nitrogen by 7.6%, and total phosphorus by 6.2%, while achieving biomass yields of 8.6–9.2 metric tons per hectare. These findings highlight switchgrass as a dual-benefit strategy for land reclamation and bioenergy feedstock production. 4) Integrated Co-Firing and CCS for Carbon-Negative Power Generation We modeled co-firing scenarios using the Power Plant Flexible Model (PPFM) to evaluate plant efficiency, greenhouse gas (GHG) emissions, and levelized cost of electricity (LCOE). Without carbon capture and storage (CCS), increasing switchgrass co-firing ratios reduced LCOE from $\$$150/MWh at 0% biomass to $\$$110/MWh at full substitution. Under CCS, costs remained higher (~$\$$250/MWh at 0% biomass) but decreased to $\$$200/MWh at 100% biomass, while enabling net-zero or carbon-negative electricity due to switchgrass sequestration benefits. Although CCS introduced efficiency penalties, pairing it with biomass co-firing offset these impacts and maximized climate benefits. Overall, optimizing co-firing ratios between 60-100%, supported by reliable logistics and storage strategies, emerged as a practical pathway to balance affordability, sustainability, and net-zero or negative GHG emissions while promoting productive reuse of AMLs.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Comparisons of the v11.1 Orbiting Carbon Observatory‐2 (OCO‐2) X CO2 Measurements With GGG2020 TCCON

The Orbiting Carbon Observatory 2 (OCO-2) is NASA's first Earth observation satellite mission dedicated to studying the sources and sinks of carbon dioxide (CO 2 ) on a global scale. The observations of reflected sunlight are inverted in a retrieval algorithm to produce estimates of the dry air mole-fractions of CO 2 (X CO2 ). The OCO-2 Level 2 data release, version 11.1 (v11.1) retrievals from the Atmospheric Carbon Observations from Space (ACOS) algorithm, includes significant improvements in the X CO2 data product compared to older OCO-2 data versions. This work compares the v11.1 X CO2 from OCO-2 against X CO2 estimates collected from a global ground-based network known as the Total Carbon Column Observing Network (TCCON), OCO-2's primary validation source. The OCO-2 project provides a version of the Level 2 data product, called “lite” files that include calibrated and bias-corrected XCO2 values, accessible together with all OCO-2 data products through the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). This work shows that OCO-2 X CO2 observations made between September 2014 and December 2023, after quality filtering and the application of an averaging kernel correction, agree well with coincident TCCON data for all OCO-2 observational modes of land (nadir, glint, target) and ocean (glint). The aggregated, bias-corrected, and quality-filtered absolute average bias values are less than or equal to 0.20 parts per million (ppm) globally for all OCO-2 observation modes, where the biases do not indicate a statistically significant time dependence. The land nadir/glint mode has the lowest bias value of −0.03 ± 0.85 ppm.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

deadtrees.earth — An open-access and interactive database for centimeter-scale aerial imagery to uncover global tree mortality dynamics

Excessive tree mortality is a global concern and remains poorly understood as it is a complex phenomenon. We lack global and temporally continuous coverage on tree mortality data. Ground-based observations on tree mortality, e.g., derived from national inventories, are very sparse, and may not be standardized or spatially explicit. Earth observation data, combined with supervised machine learning, offer a promising approach to map overstory tree mortality in a consistent manner over space and time. However, global-scale machine learning requires broad training data covering a wide range of environmental settings and forest types. Low altitude observation platforms (e.g., drones or airplanes) provide a cost-effective source of training data by capturing high-resolution orthophotos of overstory tree mortality events at centimeter-scale resolution. Here, we introduce deadtrees.earth, an open-access platform hosting more than two thousand centimeter-resolution orthophotos, covering more than 1,000,000 ha, of which more than 58,000 ha are manually annotated with live/dead tree classifications. This community-sourced and rigorously curated dataset can serve as a comprehensive reference dataset to uncover tree mortality patterns from local to global scales using space-based Earth observation data and machine learning models. This will provide the basis to attribute tree mortality patterns to environmental changes or project tree mortality dynamics to the future. The open nature of deadtrees.earth, together with its curation of high-quality, spatially representative, and ecologically diverse data will continuously increase our capacity to uncover and understand tree mortality dynamics.

Citizen science↗
DOE OSTI2025

A high resolution, gridded product for vapor pressure deficit using Daymet

Vapor pressure deficit (VPD) is a critical variable in assessing drought conditions and evaluating plant water stress. Gridded products of global and regional VPD are not freely available from satellite remote sensing, model reanalysis, or ground observation datasets. We present two versions of the first gridded VPD product for the Continental US and parts of Northern Mexico and Southern Canada (CONUS+) at a 1 km spatial resolution and daily time step. We derived VPD from Daymet maximum daily temperature and average daily vapor pressure and scale the estimates based on (1) climate determined by the Köppen-Geiger classifications and (2) land cover determined by the International Geosphere-Biosphere Programme. Ground-based VPD data from 253 AmeriFlux sites representing different climate and land cover classifications were used to improve the Daymet-derived VPD estimates for every pixel in the CONUS+ grid to produce the final datasets. We evaluated the Daymet-derived VPD against independent observations and reanalysis data. The CONUS+ VPD datasets will aid in investigating disturbances including drought and wildfire, and informing land management strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Observed Temperature and Moisture Advection Characteristics in the Southern Great Plains

Until recently, advection profiles in the planetary boundary layer have been difficult to quantify from observations. As a result, not much is known about its basic characteristics, like magnitude and diurnal cycles, or how these differ as a function of large-scale environments. Here, to provide insight into advective characteristics, a Green’s Theorem–based method for calculating profiles of advection in the lowest 3 km from an array of ground-based thermodynamic and kinematic profiling instruments has been applied to 2 years of observations from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observing site. Since advection largely depends on synoptic-scale forcing, a self-organizing map (SOM) was used to classify days based on mean sea level pressure analyses; from that, the diurnal evolution of vertical profiles of advection for different synoptic environments was quantified. The overall mean magnitude of the potential temperature advection is approximately ±3 K h −1 , while the moisture advection is approximately ±1.5 g kg −1 h −1 , with substantial variability in the sign and magnitude of the advective tendencies at different heights and throughout the diurnal cycle. Advection magnitude is strongly connected to the strength of synoptic-scale forcing, which varies depending on the time of year. Variability in advection is larger for potential temperature than it is for moisture, and strongly forced environments, like midlatitude cyclones, feature greater variability in the advection magnitude than weakly forced or quiescent environments.

advection↗
NASA NTRS1977

JPL field measurements at the Finney County, Kansas, test site, October 1976: Ground-based microwave radiometric measurements

Microwave brightness temperature measurements were made as part of the Joint Soil Moisture Experiment. These measurements are reported with a description of the JPL microwave radiometry van facility. The data will be used with ground truth data from the test site and microwave data from aircraft overflights to investigate the potential of microwave radiometry for soil moisture remote sensing under field conditions.

Njoku, E. G.↗
NASA NTRS1977

The use of Landsat digital data to detect and monitor vegetation water deficiencies

In the Large Area Crop Inventory Experiment a technique was devised using a vector transformation of Landsat digital data to indicate when vegetation is undergoing moisture stress. A relation was established between the remote-sensing-based criterion (the Green Index Number) and a ground-based criterion (Crop Moisture Index).

Thompson, D. R.↗
NASA NTRS1979

Application of LANDSAT digital data for monitoring drought

A technique utilizing transformed LANDSAT digital data for detection of agricultural vegetative water stress was developed during the 1976 South Dakota drought, and expanded to the U.S. Great Plains the following year to evaluate its effectiveness in detecting and monitoring vegetative stress water stress over large areas. This technique, the green index number (GIN), indicated when the vegetation within a segment was undergoing stress. Segments were classified as either moisture-stressed or normal using remote sensing techniques combined with a knowledge of crop condition. The remote sensing-based information was compared to a weekly ground-based index (the crop moisture index) provided by the U.S. Dept. of Commerce. The approaches used and the results from the GIN monitoring program are presented.

Thompson, D. R.↗
NASA NTRS1983

Remote sensing of row crop structure and component temperatures using directional radiometric temperatures and inversion techniques

A physically based sensor response model of a row crop was used as the mathematical framework from which several inversion strategies were tested for extracting row structure information and component temperatures using a series of sensor view angles. The technique was evaluated on ground-based radiometric thermal infrared data of a cotton row crop that covered 48 percent of the ground in the vertical projection. The results showed that the accuracies of the predicted row heights and widths, vegetation temperatures, and soil temperatures of the cotton row crop were on the order of 5 cm, 1 deg, and 2 deg C, respectively. The inversion techniques can be applied to directional sensor data from aircraft platforms and even space platforms if the effects of atmospheric absorption and emission can be corrected. In theory, such inversion techniques can be applied to a wide variety of vegetation types and thus can have significant implications for remote sensing research and applications in disciplines that deal with incomplete vegetation canopies.

Kimes, D. S.↗
NASA NTRS1984

Calibration of TM data from ground-based measurements

Methods of calibrating Thematic Mapper (TM) data by the use of ground based measurements are presented. Applications of the TM remote sensing data are discussed in addition to the ground truth measurement equipment and techniques.

Rasool, S. I.↗
NASA NTRS1984

Comparison of winds, waves, and turbulence as observed by airborne lidar, ground-based radars, and instrumented tower

On June 29, 1981, two ground-based Doppler radars, an airborne Doppler optical radar (lidar), an instrumented tower, and a rawinsonde were employed to collect wind data in the planetary boundary layer (PBL) in central Oklahoma. The main objectives of this experiment were related to a comparison of wind estimates and the visualization of the three-dimensional eddy structure in the convective atmospheric boundary layer. Discrepancies in the mean wind and wind profile detected by the different sensing systems were explained as being caused by a Schuler resonance of the aircraft's inertial navigation system, which caused an erroneous component of the aircraft's ground-relative velocity vector to be subtracted from the lidar-measured radial velocities. It is concluded that NASA's airborne Doppler optical radar system is capable of measuring wind fields in clear air on a smaller scale than was previously available with fixed remote sensors.

Eilts, M. D.↗
NASA NTRS1987

From pattern to process: The strategy of the Earth Observing System: Volume 2: EOS Science Steering Committee report

The Earth Observing System (EOS) represents a new approach to the study of the Earth. It consists of remotely sensed and correlative in situ observations designed to address important, interrelated global-scale processes. There is an urgent need to study the Earth as a complete, integrated system in order to understand and predict changes caused by human activities and natural processes. The EOS approach is based on an information system concept and designed to provide a long-term study of the Earth using a variety of measurement methods from both operational and research satellite payloads and continuing ground-based Earth science studies. The EOS concept builds on the foundation of the earlier, single-discipline space missions designed for relatively short observation periods. Continued progress in our understanding of the Earth as a system will come from EOS observations spanning several decades using a variety of contemporaneous measurements.

Source record↗
NASA NTRSDate not supplied

Preliminary Assessment of the Impact on the V-Band Oxygen Channels From Satellite Communication Uplinks

We calculate the percentage of time that an ATMS-like instrument [1] will be illuminated by the uplink beam of one of the proposed V-band communication system and estimate the damage resulting from such exposure. Using a combination of openly available information and educated guesses about the location and characteristics of the up/down link terminals, we constructed the ground segment of a hypothetical high-speed communication network. The space segment of the network was constructed from the orbital data of the existing Starlink constellation [2] of 6223 communication satellites (comsats) which is used as strawman to represent any other possible constellation of communication satellites. It is shown that without a very delicate balance of frequency allocations (science vs telecommunications), coupled with extremely steep and deep bandpass-defining filters, and strict adherence to the agreed limits (i.e. no out-of-band transmissions) the deployment of the telecommunication network leads to almost-complete loss of some important geophysical data. For the analysis we use the spectral characteristics of the ATMS instrument with the ephemeris for the NOAA-21 satellite [3]. The analysis is conducted for the USA and the simulation covers 8 consecutive days in July 2024. Effective and accurate microwave remote sensing of the atmosphere depends on the availability of interference-free spectrum windows at frequencies which are prescribed by physical processes [e.g. 4]. The family of resonant lines of the oxygen molecule near 60 GHz provides a unique opportunity to sample the vertical distribution of temperature and density from space, and it has been exploited for weather and climate studies from polar-orbiting satellites since 1978 (MSU on TIROS-N [5]). It remains a staple in the payloads operated by Russia, China, USA, Japan, France, India, UK, Ukraine [6] which are built around a common blueprint: a few wide-band (hundreds of MHz) channels around 50 GHz to sample the atmosphere and the surface while several more channels with high spectral resolution (few MHz) sample the individual resonant lines. Accurate retrieval of the environmental parameters depends upon the data provided by both sets of channels, and the their location in frequency space is not arbitrary and cannot be altered at will [7, 8]. The introduction of 5G technology in 2019 has driven telecommunication companies to request more bandwidth to be dedicated to their devices. This additional bandwidth is only available in spectral regions traditionally reserved for environmental and astrophysical research, such as the V-band between 50 and 60 GHz for up/downlink between satellites in low-earth orbits and terminals connected to fiberoptics network for distribution to high-speed local internet services. The power broadcast by the uplink communication leg is many orders of magnitude greater than the natural thermal signal emitted from the Earth scene. If the ground antenna were to perfectly align with the passive instrument’s antenna, the spaceborne receiver would suffer permanent, irreparable damage. While a direct boresight-to-boresight conjunction is extremely unlikely (even with a large constellation of satellites the fraction of the celestial sphere occupied by the satellites remains minuscule) the finite size of the ground station’s antenna beam in the sky suggests that the ATMS will be in the near background (as seen from the ground station) of one of the communication satellites and will be illuminated by either the main lobe or the near sidelobes of the uplink antenna more often than it is desirable. For our analysis we first calculate the position of the ATMS with respect to each of the ground stations at a resolution of 0.2 sec, then calculate the position of each of the comsats which are at least 25 deg above the station’s local horizon; finally we calculate the angle between the line-of-sight of the ATMS and the line-of-sight of the comsat. We assume that the gain pattern of the ground station is circularly symmetric; the angle-off-station-boresight then provides an attenuation of the uplink power which we use to assess the likely effect upon the passive instrument’s operations. We assume that each ground station can communicate with all the comsats in its field of view; this implies that, on average, a ground station can engage with 46 comsats simultaneously. The analysis is repeated for the case when the uplink broadcast within the ATMS passive channels (in-band scenario) and for the case when the uplink is limited to frequencies adjacent to the ATMS channels (out-of-band scenario). The antenna of the ground station is modelled as having a HPBW (Half-Power Beam Width) of 0.16 deg and EIRP (Equivalent Isotropic Radiated Power) of 70 dBW. We account for the geometric dissipation of the signal caused by the satellite orbital altitude, the attenuation induced by atmospheric gasses at 51 GHz and the mismatch between the circular polarization of the ground-based transmitting antenna and the linear polarization of the satellite-borne receiving antenna. The damages on ATMS are estimated from bench-level measurement conducted at the ATMS’ manufacturer facilities [unpublished].

passive microwave↗