Results for “hosted payload” — Page 6

NASA NTRS2019

A Survey of the Spacecraft Line-Of-Sight Jitter Problem

Predicting, managing, controlling, and testing spacecraft Line-of-Sight (LoS) jit- ter due to on-board internal disturbance sources is a challenging multi- disciplinary systems engineering problem, especially for those observatories hosting extremely sensitive optical sensor payloads with stringent requirements on allowable LoS jitter. Some specific spacecraft jitter engineering challenges will be introduced and described in this survey paper. Illustrative examples of missions where dynamic interactions have to be addressed to satisfy demanding payload instrument LoS jitter requirements will be provided. Some lessons learned and a set of recommended rules of thumb are also presented to provide guidance for analysts on where to initiate and how to approach a new spacecraft jitter design problem. These experience-based spacecraft jitter lessons learned and rules of thumb are provided in the hope they can be leveraged on new space system development projects to help overcome unfamiliarity with previously identified jitter technical pitfalls and challenges.

Dennehy, Cornelius J.↗

NASA NTRS2018

Spacecraft Micro-Vibration: A Survey of Problems, Experiences, Potential Solutions, and Some Lessons Learned

Predicting, managing, controlling, and testing spacecraft micro-vibrations due to on-board internal disturbance sources is a formidable multi-disciplinary systems engineering challenge, especially for those observatories hosting extremely sensitive optical sensor payloads with stringent requirements on allowable Line-of-Sight (LOS) jitter. In this paper some specific spacecraft micro-vibration engineering challenges will be introduced and described. Technical background context is provided with the inclusion of several illustrative examples of NASA and ESA missions (both past and present) where dynamic interactions have to be addressed and which have demanding payload instrument LOS jitter requirements. A general modeling, analysis, simulation, and test approach to address and solve the overall problem of spacecraft micro-vibrations is outlined. Recommended rules of thumb are presented to provide guidance for analysts on where to initiate and how to approach a new spacecraft micro-vibration design problem. A set of experience based spacecraft micro-vibration lessons learned are also presented in the hope they can be leveraged on new system development projects to help overcome unfamiliarity with previously identified micro-vibration technical pitfalls and challenges.

Alvarez-Salazar, Oscar S.↗

NASA NTRS2002

Commercial Instrumentation Technology Associates Inc. Biomedical Experiments Payload (CIBX-2)

Experiments to find solutions for a range of biomedical issues are being hosted by the Commercial Instrumentation Technology Associates Inc. (ITA) Biomedical Experiments (CIBX-2) payload. This research encompasses more than 20 separate experiments including cancer research, commercial experiments and hands-on student experiments from 10 schools as part of ITA's ongoing University Among the Stars program. Protein crystal growth experiments will address the structure of urokinase - a protein that has been identified as a key enzyme in the spread of brain, lung, colon, prostate and breast cancers. Crystals of Bence Jones, a protein associated with bone cancer, will also be grown. Understanding their structures may help scientists develop treatments. In a related area, the Microencapsulation of Drugs (MEPS) is an anti-cancer drug delivery system, based on a 10-year partnership with NASA's Johnson Space Center. On this mission, the co-encapsulation of antibodies and immune stimulants will be made in submicron microcapsules to target pulmonary and bacterial infections.

Morrison, Dennis↗

NASA NTRS2023

Development of Two High-Energy Bus ‘Cores’ for Rapid Support of Low-TRL and Educational Payloads: A Software-Configured EPS Combined with Flexible C&DH

For several years the TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has relied upon an in-house developed unit to serve both EPS (Electrical Power System) and C&DH (Command and Data Handling) roles along with low data-rate telemetry functions, i.e., serving as the ‘core’ of the spacecraft bus. This ‘core’ has a considerable task given the rapid cadence of the TES program and the typically low-TRL of payloads; configurability and compatibility are key to prevent mission-specific hardware. However, at only 15 watts the current core has become insufficient to support the program’s growing missions and increasingly demanding payloads. To this end, the NOW program is developing new cores to support two TES mission classes: a single-PCB ‘MiniCore’ designed to support 80-watt missions 6U or smaller in LEO, and a three-PCB, radiation-tolerant ‘StackCore’ designed to support 6U and larger missions over 500 watts in LEO and beyond. The ‘MiniCore’ design consists of three main segments: a processor-agnostic C&DH, a software-configured EPS, and a backup low data-rate radio. The design philosophy was to enable rapid-manufacture in a turbulent supply chain, hence the design consists of COTS parts with a focus on those able to be drop-in replaced with radiation-tolerant versions when demanded by the mission. As a single PC-104 sized circuit board, power density and ease of integration also dominated design, demanding the use of modern features such as single-point USB-C for easy charging and monitoring of the spacecraft on the ground. The ‘MiniCore’ can support 80 watts of load, 140 watt-hours of storage, and over 20 watts of optimized solar generation with extensive power monitoring throughout. The ‘MiniCore’ supports one battery pack, six solar-panels, six loads, five actuators, Iridium SBD, and an internal 802.15.4 network. Additionally, the processor-agnostic design can accept any PJRC Teensy 3.x or Adafruit Feather microcontroller unit to enable processor scaling with mission requirements or environment. It is expected a development unit of this design will be completed before conference. The ‘StackCore’ design consists of three stacked PC-104 sized circuit boards: one dedicated to power generation and storage, one dedicated to power distribution, and one dedicated to C&DH tasks. This delineation is necessary to support the transition from highly integrated ICs to discrete analog circuitry, enabling a primarily analog control power system able to operate without software in a radiation environment with finer monitoring compared to the ‘MiniCore’ design. The planned base architecture supports over 500 watts of load, 250 watt-hours of storage, and over 80 watts of optimized solar generation. The power distribution board allows for the use of daughter cards hosting custom converters or interfaces for payloads, in addition to the software-configured supplies used on the ‘MiniCore’. This core stack will be managed by a Vorago ARM M4 microcontroller and support the same wireless communications as the ‘MiniCore’, with optional integration of a NOW S-band radio and attitude determination sensors for ‘black box’ functionality. It is expected the prototype will still be in development during conference.

Spacecraft↗

NASA NTRSDate not supplied

Development of Two High-Energy Bus ‘Cores’ for Rapid Support of Low-TRL and Educational Payloads: A Software-Configured EPS Combined with Flexible C&DH

For several years the TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has relied upon an in-house developed unit to serve both EPS (Electrical Power System) and C&DH (Command and Data Handling) roles along with low data-rate telemetry functions, i.e., serving as the ‘core’ of the spacecraft bus. This ‘core’ has a considerable task given the rapid cadence of the TES program and the typically low-TRL of payloads; configurability and compatibility are key to prevent mission-specific hardware. However, at only 15 watts the current core has become insufficient to support the program’s growing missions and increasingly demanding payloads. To this end, the NOW program is developing new cores to support two TES mission classes: a single-PCB ‘MiniCore’ designed to support 80-watt missions 6U or smaller in LEO, and a three-PCB, radiation-tolerant ‘StackCore’ designed to support 6U and larger missions over 500 watts in LEO and beyond. The ‘MiniCore’ design consists of three main segments: a processor-agnostic C&DH, a software-configured EPS, and a backup low data-rate radio. The design philosophy was to enable rapid-manufacture in a turbulent supply chain, hence the design consists of COTS parts with a focus on those able to be drop-in replaced with radiation-tolerant versions when demanded by the mission. As a single PC-104 sized circuit board, power density and ease of integration also dominated design, demanding the use of modern features such as single-point USB-C for easy charging and monitoring of the spacecraft on the ground. The ‘MiniCore’ can support 80 watts of load, 140 watt-hours of storage, and over 20 watts of optimized solar generation with extensive power monitoring throughout. The ‘MiniCore’ supports one battery pack, six solar-panels, six loads, five actuators, Iridium SBD, and an internal 802.15.4 network. Additionally, the processor-agnostic design can accept any PJRC Teensy 3.x or Adafruit Feather microcontroller unit to enable processor scaling with mission requirements or environment. It is expected a development unit of this design will be completed before conference. The ‘StackCore’ design consists of three stacked PC-104 sized circuit boards: one dedicated to power generation and storage, one dedicated to power distribution, and one dedicated to C&DH tasks. This delineation is necessary to support the transition from highly integrated ICs to discrete analog circuitry, enabling a primarily analog control power system able to operate without software in a radiation environment with finer monitoring compared to the ‘MiniCore’ design. The planned base architecture supports over 500 watts of load, 250 watt-hours of storage, and over 80 watts of optimized solar generation. The power distribution board allows for the use of daughter cards hosting custom converters or interfaces for payloads, in addition to the software-configured supplies used on the ‘MiniCore’. This core stack will be managed by a Vorago ARM M4 microcontroller and support the same wireless communications as the ‘MiniCore’, with optional integration of a NOW S-band radio and attitude determination sensors for ‘black box’ functionality. It is expected the prototype will still be in development during conference.

Spacecraft↗

NASA NTRSDate not supplied

Development of Two High-Energy Bus ‘Cores’

For several years the TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has relied upon an in-house developed unit to serve both EPS (Electrical Power System) and C&DH (Command and Data Handling) roles along with low data-rate telemetry functions, i.e., serving as the ‘core’ of the spacecraft bus. This ‘core’ has a considerable task given the rapid cadence of the TES program and the typically low-TRL of payloads; configurability and compatibility are key to prevent mission-specific hardware. However, at only 15 watts the current core has become insufficient to support the program’s growing missions and increasingly demanding payloads. To this end, the NOW program is developing new cores to support two TES mission classes: a single-PCB ‘MiniCore’ designed to support 80-watt missions 6U or smaller in LEO, and a three-PCB, radiation-tolerant ‘StackCore’ designed to support 6U and larger missions over 500 watts in LEO and beyond. The ‘MiniCore’ design consists of three main segments: a processor-agnostic C&DH, a software-configured EPS, and a backup low data-rate radio. The design philosophy was to enable rapid-manufacture in a turbulent supply chain, hence the design consists of COTS parts with a focus on those able to be drop-in replaced with radiation-tolerant versions when demanded by the mission. As a single PC-104 sized circuit board, power density and ease of integration also dominated design, demanding the use of modern features such as single-point USB-C for easy charging and monitoring of the spacecraft on the ground. The ‘MiniCore’ can support 80 watts of load, 140 watt-hours of storage, and over 20 watts of optimized solar generation with extensive power monitoring throughout. The ‘MiniCore’ supports one battery pack, six solar-panels, six loads, five actuators, Iridium SBD, and an internal 802.15.4 network. Additionally, the processor-agnostic design can accept any PJRC Teensy 3.x or Adafruit Feather microcontroller unit to enable processor scaling with mission requirements or environment. It is expected a development unit of this design will be completed before conference. The ‘StackCore’ design consists of three stacked PC-104 sized circuit boards: one dedicated to power generation and storage, one dedicated to power distribution, and one dedicated to C&DH tasks. This delineation is necessary to support the transition from highly integrated ICs to discrete analog circuitry, enabling a primarily analog control power system able to operate without software in a radiation environment with finer monitoring compared to the ‘MiniCore’ design. The planned base architecture supports over 500 watts of load, 250 watt-hours of storage, and over 80 watts of optimized solar generation. The power distribution board allows for the use of daughter cards hosting custom converters or interfaces for payloads, in addition to the software-configured supplies used on the ‘MiniCore’. This core stack will be managed by a Vorago ARM M4 microcontroller and support the same wireless communications as the ‘MiniCore’, with optional integration of a NOW S-band radio and attitude determination sensors for ‘black box’ functionality. It is expected the prototype will still be in development during conference.

Avery Brock↗

NASA NTRS2021

The Sun Radio Interferometer Space Experiment (SunRISE) Mission

The Sun Radio Interferometer Space Experiment (SunRISE) will provide an entirely new view on particle acceleration and transport in the inner heliosphere by creating the first low radio frequency interferometer in space to localize heliospheric radio emissions. By imaging and determining the location of decametric-hectometric (DH) radio bursts from 0.1 MHz–25 MHz, SunRISE will provide key information on particle acceleration mechanisms associated with coronal mass ejections (CMEs) and the magnetic field topology from active regions into interplanetary space. Six small spacecraft, of a 6U form factor, will fly in a supersynchronous geosynchronous Earth orbit (GEO) orbit within about 10 km of each other, in a passive formation, and image the Sun in a portion of the spectrum that is blocked by the ionosphere and cannot be observed from Earth. Key aspects that enable this mission are that only position knowledge of the spacecraft is required, not active control, and that the architecture involves a modest amount of on-board processing coupled with significant ground-based processing for navigation, position determination, and science operations. Mission-enabling advances in software-defined radios, GPS navigation and timing, and small spacecraft technologies, developed and flown on the DARPA High Frequency Research (DHFR), the Community Initiative for Continuing Earth Radio Occultation (CICERO), and the Mars Cube One (MarCO) missions, have made this mission affordable and low-risk. The SunRISE mission will involve utilizing commercial access to space, in which the SunRISE spacecraft will be carried to their target orbit as a secondary payload in conjunction with a larger host spacecraft intended for GEO.

Neilson, Tim↗

NASA NTRSDate not supplied

On-Orbit Results of Pointing, Acquisition, and Tracking for the TBIRD CubeSat Mission

NASA’s TeraByte Infrared Delivery (TBIRD) program launched in May 2022 and successfully demonstrated high-rate laser communications from low-Earth orbit to ground. The laser communications payload provides pointing feedback to the host spacecraft to precisely track the ground station through the 5-minute pass. This paper presents the on-orbit results of the pointing system for TBIRD, including initial acquisition and closed-loop performance within about 30 urad RMS per axis.

Lasercom↗

NASA NTRSDate not supplied

On-Orbit Results of Pointing, Acquisition, and Tracking for the TBIRD Cubesat Mission

Since launch in May 2022, the TeraByte Infrared Delivery (TBIRD) payload on a 6U CubeSat has successfully demonstrated 100/200 Gbps laser communications and has transferred >1 TB in a pass from low Earth orbit to ground. To support the narrow downlink beam needed for high rate communications, the payload provides pointing feedback to the host spacecraft to precisely track the ground station throughout the 5-minute pass. This paper presents the on-orbit results of the pointing and tracking system for TBIRD, including initial acquisition and closed-loop tracking performance of 20–35 µrad RMS per axis. Results from on-orbit characterization of the transmit beam are also presented. Measurements of Tx/Rx alignment show stability within 20 µrad, ensuring that tracking on the uplink accurately points the downlink.

TBIRD↗

NASA NTRSDate not supplied

Operations and Results from the 200 Gbps Tbird Lasercom Mission

Since launch in May 2022, the TeraByte Infrared Delivery (TBIRD) mission has successfully demonstrated 200 Gbps laser communications from a 6U CubeSat and has transferred >1 TB in a pass from low Earth orbit to ground. To support the narrow downlink beam needed for high rate communications, the payload provides pointing feedback to the host spacecraft to precisely track the ground station throughout the 5-minute pass. The space and ground terminals utilize fiber-coupled coherent transceivers in conjunction with an automatic repeat request (ARQ) system to guarantee error-free communication through an atmospheric fading channel. This paper presents an overview of the link operations and mission results to date.

lasercoms↗

NASA NTRS2022

The Sun Radio Interferometer Space Experiment (SunRISE) Mission

The Sun Radio Interferometer Space Experiment (SunRISE) will provide an entirely new view on particle acceleration and transport in the inner heliosphere by creating the first low radio frequency interferometer in space to localize heliospheric radio emissions. By imaging and determining the location of decametric-hectometric (DH, 0.1 MHz–23 MHz) solar radio bursts, SunRISE will provide key information on particle acceleration mechanisms associated with coronal mass ejections (CMEs) and the magnetic field topology from active regions into interplanetary space. The SunRISE Observatory will consist of six space vehicles in a passive formation, in orbits designed to keep them within approximately 10 km of each other, and flying in a supersynchronous geosynchronous Earth orbit (GEO). Each space vehicle consists of a Solar DH-GNSS payload and a 6U form factor spacecraft. The SunRISE Observatory together with significant ground-based processing, will enable imaging of the Sun in a portion of the spectrum that is blocked by the ionosphere and cannot be observed from Earth. Key aspects that enable this mission are that only position knowledge of the space vehicles is required, not active control, and that the architecture involves a modest amount of on-board processing coupled with significant ground-based processing for navigation, position determination, and science operations. Mission-enabling advances in software-defined radios, GPS navigation and timing, and small spacecraft technologies, developed and flown on the DARPA High Frequency Research (DHFR) and the Community Initiative for Continuing Earth Radio Occultation (CICERO) have made this mission affordable and low-risk. The SunRISE mission will exploit the multiple spacecraft per aperture (MSPA) capability of NASA’s Deep Space Network (DSN), for more efficient data transfers of larger data volumes, and utilize commercial access to space, in which the SunRISE space vehicles will be carried to their target orbit as secondary payloads in conjunction with a larger host spacecraft intended for GEO.

Neilson, Tim↗

NASA NTRSDate not supplied

Operations and Results from the 200 Gbps TBIRD Laser Communication Mission

Since launch in May 2022, the TeraByte Infrared Delivery (TBIRD) mission has successfully demonstrated 200 Gbps laser communications from a 6U CubeSat and has transferred up to 4.8 terabytes (TB) in a pass from low Earth orbit to ground. To our knowledge, this is the fastest downlink ever achieved from space. To support the narrow downlink beam needed for high rate communications, the payload provides pointing feedback to the host spacecraft to precisely track the ground station throughout the 5-minute pass. The space and ground terminals utilize fiber-coupled coherent transceivers in conjunction with an automatic repeat request (ARQ) system to guarantee error-free communication through an atmospheric fading channel. This paper presents an overview of the link operations and mission results to date, as well as implications for future missions with high rate lasercom.

TBIRD↗

NASA NTRSDate not supplied

Designing Experiments for SpinSat, A Novel Variable-Gravity-and-Radiation Platform for Deep-Space Science

Conducting experiments to measure the effects of deep-space radiation and reduced gravity on biological and physical systems remains challenging. The result is a substantial knowledge gap that poses risks to our ability to sustain life and conduct critical operations in deep space. The SpinSat spacecraft platform is designed to bridge such gaps by providing low-cost, reliable, and frequent access to deep space. A disk-shaped rotating satellite that can provide artificial gravity and exposure to space radiation simultaneously, SpinSat is designed to accommodate payloads in a CubeSat form factor (with at least 48 “U” volume), providing power, communications, and a benign thermal environment. It is orbit-agnostic, enabling access to a variety of radiation environments (Van Allen belts, deep space, cis-lunar); and can be equipped with shielding to mimic planetary radiation environments, for both short- and long-term experiments. Because of its versatility and prioritization of late loading for biological payloads, it is well suited to host a wide range of ranging from human tissues and organoids to microorganisms, plants, chemistry, and regolith. Here, we present examples of potential experiment concepts for SpinSat, and discuss the details of how experimental designs could interact with the platform. Potential SpinSat studies have diverse applications, including fundamental radiation biology and DNA repair; cancer biology and countermeasure development; space agriculture; bioproduction of nutrients and pharmaceuticals; understanding regolith dynamics in low gravity; prebiotic chemistry and panspermia. We will further highlight ideas for SpinSat-compatible experimental hardware, existing and in development, and experiment-relevant details on SpinSat capabilities including artificial gravity, potential radiation environments, data, and power. This presentation will aim to provide investigators with the high-level technical information necessary to inspire experiments for SpinSat. We also seek to stimulate conversation and to gain community input on accommodations needs to help guide the evolving design of this platform.

experiment design↗

NASA NTRS1980

Payload Crew Training Complex (PCTC) utilization and training plan

The physical facilities that comprise the payload crew training complex (PCTC) are described including the host simulator; experiment simulators; Spacelab aft flight deck, experiment pallet, and experiment rack mockups; the simulation director's console; payload operations control center; classrooms; and supporting soft- and hardware. The parameters of a training philosophy for payload crew training at the PCTC are established. Finally the development of the training plan is addressed including discussions of preassessment, and evaluation options.

Self, M. R.↗

NASA NTRS1975

Trajectory analysis for solar electric propulsion stage /SEPS/ out-of-ecliptic mission

It is planned to use the SEPS as the upper stage of a transportation system capable of delivering either a separable payload spacecraft or an attached science package to a host of planetary targets including inner and outer planets, asteroids, and comets. It may also be employed in earth orbit to deliver and retrieve payloads in geosynchronous orbit. An investigation is conducted regarding the use of the SEPS for a relatively high energy out-of-ecliptic mission planned for 1980. Parametric performance data for the mission are considered along with trajectory characteristics, launch vehicle performance, and SEPS performance.

Dazzo, E. J.↗

DOE OSTI2026

Conjugation-based genome engineering enables rapid prototyping and bioproduction in non-model bacteria

Abstract Non-model bacteria offer unique metabolic capabilities for sustainable bioproduction, yet their limited genetic accessibility hinders systematic strain development. Here we present conjugation-based serine recombinase-assisted genome engineering (cSAGE), a broad-host-range platform that enables predictable, iterative genomic integration in transformation-resistant bacteria. cSAGE combines conjugative DNA delivery, standardized low-copy vectors, orthogonal recombinases, and modular genetic parts to support rapid pathway assembly and cross-host benchmarking. Using purple nonsulfur bacteria as a testbed, we integrate promoter engineering, multi-payload genome modification, and genome-scale metabolic modeling to empirically evaluate host-dependent pathway performance. Applying this workflow, we identify strain-specific differences in photosynthetic conversion of lignin-derived p -coumarate to the thermoplastic precursor p -vinylphenol. By enabling genome engineering and functional comparison across diverse bacteria using a single plasmid system, cSAGE provides a general framework for non-model strain prototyping and biotransformation discovery.

Guzman, Michael S. [Department of Chemical Enginee↗

NASA NTRS1994

Mission 62 advances materials research

Advances made in materials processing research from experiments performed during space shuttle mission 62 aboard the Columbia orbiter are discussed. The experiments in the US Microgravity Payload (USMP-2) included the following: a host of microgravity materials science experiments; the Critical Light Fluid Scattering Experiment; and the Long-Duration Space Environment Candidate Material Exposure Experiment. The Office of Aeronautics and Space Technology (OAST-2) experiments included the Experimental Investigation of Spacecraft Glow and the Spacecraft Kinetic Infrared Test. Various aspects of the experiments are briefly discussed.

Mckenna, James T.↗

NASA NTRSDate not supplied

Lunar Pathfinder Laser Retroreflector Array

ESA’s Lunar Pathfinder mission is scheduled to launch and orbit the Moon at the end of 2024 in an elliptical lunar frozen orbit. The mission will provide lunar communication services and host a Navigation In-Orbit-Demonstration payload that will use Global Navigational Satellite System (GNSS) signals from the moon for positioning. NASA is providing a laser retroreflector array (LRA) for this mission to validate the GNSS-based positioning and demonstrate two-way laser ranging in support of precision orbit determination for lunar missions. The LRA consists of 48 x 4.06 cm diameter uncoated cube corners that will provide an optical cross section around 10 times larger than LRA on the Lunar Reconnaissance Orbiter (LRO). This increased cross section along with regular dedicated periods where the LRA is pointed towards Earth should significantly reduce the challenges encountered during laser ranging to LRO. An overview of the Lunar Pathfinder mission will be presented along with results from optical measurements of the Lunar Pathfinder LRA.

Stephen M Merkowitz↗